Hollow and Solid Spheres Assembled from Functionalized Macrocycles Containing Adamantane.

An adamantane-based macrocycle possessing eight hydroxyl groups (1) was synthesized, in which the macrocyclic framework comprises two disubstituted adamantane molecules bearing phenyl derivatives connected to two biphenylene spacers by oxygen atoms. Furthermore, functionalized macrocycles containing methyl (2) and methoxycarbonylmethyl (3) groups were prepared. From the X-ray crystallographic analysis, the backbone of the macrocycles in all crystals had a nearly hexagonal shape with a cavity and these macrocycles could be arranged into different tubular structures dependent on the substituents. In acetone, macrocycle (1) formed stable hollow spherical aggregates with multilayer membranes. In contrast, macrocycle (3) exhibited no production of self-assembled materials in chloroform. The addition of hexane into the solution caused the generation of solid spheres and their fused network aggregates, which were finally transformed into crystals owing to the solvent effects.

Morphological and Physicochemical Evaluation of Two Distinct Glibenclamide/Hypromellose Amorphous Nanoparticles Prepared by the Antisolvent Method.

The morphology and stability of amorphous nanoparticles of glibenclamide (GLB) prepared by the antisolvent method using different methods of adding hypromellose (HPMC) were evaluated. Nano-A was prepared by the injection of a dimethyl sulfoxide (DMSO) solution of GLB into the HPMC solution, whereas nano-B was obtained by the injection of a DMSO solution of GLB and HPMC into water. Cryogenic transmission electron microscopy, field-emission scanning electron microscopy, and field-emission transmission electron microscopy, including energy dispersive X-ray spectrometry, revealed that the particles of the nano-A and nano-B samples are hollow spheres and nonspherical nanoparticles, respectively. Powder X-ray diffraction and solid-state NMR measurements showed that GLB is present in an amorphous state in both nano-A and nano-B. The weight ratios of HPMC in the GLB/HPMC nanoparticles were 11 and 16% for nano-A and nano-B, respectively, as determined by solution-state NMR. The glass transition temperatures ( Tg) of nano-A and nano-B evaluated using differential scanning calorimetry were lower by about 10 °C compared to that of amorphous GLB, presumably because of a Tg confinement effect and the surface coverage and mixing of HPMC, as suggested by the inverse gas chromatography experiment. GLB crystallization during storage was suppressed more strongly in nano-B than nano-A, owing to the higher amount of HPMC and the higher miscibility between GLB and HPMC. It is suggested that the diffusion rate of the solvent during nanoprecipitation determined the nanoparticle properties. In nano-A, the precipitation of GLB first occurred at the outer interface because of the rapid diffusion of the solvent. Thus, hollow spherical particles with HPMC preferentially located near the surface were formed. On the other hand, the diffusion of the solvent in nano-B was suppressed because of the presence of HPMC, yielding small nonspherical nanoparticles with a high miscibility of GLB and HPMC.

Aqueous nanosilica dispersants for carbon nanotube.

Nanosilicas can disperse single-wall carbon nanotube (SWCNT) in aqueous solution efficiently; SWCNTs are stably dispersed in aqueous media for more than 6 months. The SWCNT dispersing solution with nanosilica can produce highly conductive transparent films which satisfy the requirements for application to touch panels. Even multiwall carbon nanotube can be dispersed easily in aqueous solution. The highly stable dispersion of SWCNTs in the presence of nanosilica is associated with charge transfer interaction which generates effective charges on the SWCNT particles, giving rise to electrostatic repulsion between the SWCNTs in the aqueous solution. Adhesion of charged nanosilicas on SWCNTs in the aqueous solution and a marked depression of the S11 peak of optical absorption spectrum of the SWCNT with nanosilicas suggest charge transfer interaction of nanosilicas with SWCNT. Thus-formed isolated SWCNTs are fixed on the flexible three-dimensional silica jelly structure in the aqueous solution, leading to the uniform and stable dispersion of SWCNTs.

The first atomistic modelling-aided reproduction of morphologically defective single walled carbon nanohorns.

A new modelling-aided approach for the atomistic model of single walled carbon nanohorn (SWNH) creation is presented, based on experimental evidence, on realistic potential of carbon-carbon interactions and on molecular simulations. A new model of SWNHs is next used to predict Ar adsorption properties and to check the molecular fundamentals of the adsorption mechanism. The influence of the apex angle value, nanohorn diameter and nanohorn length on the shapes of isotherms, enthalpy, high resolution α(s)-plots and adsorption potential distribution curves is checked. Finally the comparison with new experimental Ar adsorption results is shown and the conclusions on the porosity of real SWNH aggregates are given.

Formation of CO(x)-free H2 and cup-stacked carbon nanotubes over nano-Ni dispersed single wall carbon nanohorns.

Transitional metals (M) were dispersed on single-wall carbon nanohorns (M/SWCNHs, M = Fe, Co, Ni, Cu) by simple thermal treatment of the deposited metal nitrate without H(2) reduction. Nanometallic Ni particles on SWCNH were evidenced by high-resolution transmission electron microscopic observation and X-ray photoelectron spectroscopy. The nano-Ni dispersed on SWCNH showed the highest CH(4) decomposition activity; the activity of used transitional metals decreases in the order Ni ≫ Co > Fe ≫ Cu. On the other hand, the reaction rate over Ni/SWCNH was much larger than that over Ni/Al(2)O(3), and the former provided CO(x)-free H(2) and cup-stacked carbon nanotubes, while Ni/Al(2)O(3) produced CO(x) in addition to H(2). SWCNH was superior to Al(2)O(3) as the catalyst support of Ni for the CH(4) decomposition reaction.

Anomaly of CH4 molecular assembly confined in single-wall carbon nanohorn spaces.

Vibrational-rotational properties of CH(4) adsorbed on the nanopores of single-wall carbon nanohorns (SWCNHs) at 105-140 K were investigated using IR spectroscopy. The difference vibrational-rotational bands of the ν(3) and ν(4) modes below 130 K show suppression of the P and R branches, while the Q branches remain. The widths of the Q branches are much narrower than in the bulk gas phase due to suppression of the Doppler effect. These results indicate that the rotation of CH(4) confined in the nanospaces of SWCNHs is highly restricted, resulting in a rigid assembly structure, which is an anomaly in contrast to that in the bulk liquid phase.

Nanoporosities and catalytic activities of Pd-tailored single wall carbon nanohorns.

The nanoporosities and catalytic activities of Pd nanoparticles dispersed on single wall carbon nanohorns (Pd-SWCNHs) and oxidized single wall carbon nanohorns (Pd-ox-SWCNHs) were examined. A transmission electron microscopy (TEM) observation indicated that Pd nanoparticles of 2-3 nm size were highly dispersed on both the SWCNHs. X-ray photoelectron spectra and N2 adsorption isotherms at 77 K illustrated the differences in the deposition process mechanisms of the Pd-SWCNHs and Pd-ox-SWCNHs; the deposition process depended on the surface functional groups. The supercritical H2 adsorption isotherms at 77 K suggested the relationships between the interaction of Pd-SWCNHs and Pd-ox-SWCNHs with H2 and the catalytic activities for a water formation reaction in a gas phase at 273 or 298 K. The catalytic activity measurement and TEM observation of the catalysts after the reactions demonstrated that the Pd-SWCNHs and Pd-ox-SWCNHs are promising catalysts.

Solvent-Dependent Self-Assembly and Crystal Structures of a Salen-Based Macrocycle.

A salen-based macrocycle possessing adamantane units was constructed from two ethylenediamine and two disubstituted adamantane-bearing salicylaldehyde components. The addition of methanol to a tetrahydrofuran solution of the macrocycle afforded the crystals via hollow spherical and fused aggregates, and X-ray crystallographic analysis showed that the macrocycle had a rhomboidal structure. The use of chloroform instead of methanol gave the crystals of a square-shaped macrocycle without the formation of self-assembled materials.

Adamantane-based oxacyclophanes containing pyrazines: synthesis, crystal structure, and self-assembly behavior.

Two adamantane-based oxacyclophanes were synthesized by the SNAr reaction of bis-phenol derivatives based on adamantane with 2,6-dichloropyrazine. Their crystal structures had distorted or twisted 1,3-alternate conformations. The oxacyclophanes indicated no formation of spherical aggregates in acetone. However, addition of water into the solution caused the generation of hollow spherical aggregates with a multilayer membrane. Over time, the hollow spheres were induced into fibrous and network assemblies, which were eventually transformed into single crystals.

Self-assembly of a tetrapodal adamantane with carbazole branches into hollow spherical aggregates in organic media.

A hydrophobic tetrapodal molecule is composed of carbazole units at the periphery linked by a phenyl spacer on an adamantane core. Tetrapodal adamantane self-assembles into hollow spherical aggregates with a multilayer membrane in organic media. The spherical assembly size is dependent on the organic solvent used. Hollow spheres can entrap guest molecules within their internal spaces. By increasing the concentrations of tetrapodal molecules, hollow spheres fused into necklace-shaped nanostructures and two-dimensional networks were obtained.

Diffusion-barrier-free porous carbon monoliths as a new form of activated carbon.

For the practical use of activated carbon (AC) as an adsorbent of CH(4) , tightly packed monoliths with high microporosity are supposed to be one of the best morphologies in terms of storage capacity per apparent volume of the adsorbent material. However, monolith-type ACs may cause diffusion obstacles in adsorption processes owing to their necked pore structures among the densely packed particles, which result in a lower adsorption performance than that of the corresponding powder ACs. To clarify the relationship between the pore structure and CH4 adsorptivity, microscopic observations, structural studies on the nanoscale, and conductivity measurements (thermal and electrical) were performed on recently developed binder-free, self-sinterable ACs in both powder and monolithic forms. The monolith samples exhibited higher surface areas and electrical conductivities than the corresponding powder samples. Supercritical CH4 adsorption isotherms were measured for each powder and monolith sample at up to 7 MPa at 263, 273, and 303 K to elucidate their isosteric heats of adsorption and adsorption rate constants, which revealed that the morphologies of the monolith samples did not cause serious drawbacks for the adsorption and desorption processes. This will further facilitate the availability of diffusion-barrier-free microporous carbon monoliths as practical CH4 storage adsorbents.