Fatliquor for fungus resistant leather-a sustainable ecofriendly approach.

Surface-active softening agents, such as Fatliquors, have a significant impact on the leather industry as they enhance the physicochemical properties of leather. This study focuses on analyzing the synthesis, properties, characterization, and sulfonation of Swietenia mahagoni seed oil to determine its potential as a fatliquoring agent for leather. An investigation was conducted to verify the alteration of Swietenia mahagoni oil through the analysis of its properties before and after the sulfonation process. A scientific analysis was carried on the oil using GC-FID, revealing the presence of various unsaturated fatty acids such as linoleic, linolenic, oleic, palmitic, and arachidic acids. This demonstrates the sulfonating capability of this sky fruit seed oil. A fatliquor was created by sulfonating the oil, and the sulfonation was verified through Fourier Transform Infrared Spectroscopy (FTIR) and 1H Nuclear Magnetic Resonance (NMR) spectra. The prominent peak observed at 1209 cm-1 in the FTIR spectra indicated the stretching of S=O in both sulfate and sulfonate groups. The newly formed protons (H-C-S or H-C-O) showed signals between δ 4.09 and 4.29 ppm in the 1H NMR spectra, confirming the sulfonation of the fatliquor that was prepared. Moreover, the change in the melting point of sulfonated Mahogany oil from 40.8 °C to 48.1 °C suggests increased saturation levels. The fatliquor's emulsion stability was found to be at a satisfactory level. After conducting tests on the treated leather, the physical strength and morphological structure was analyzed using Field Emission Scanning Electron Microscopy (FE-SEM), the fatliquor improved the lubrication and strengthened the fibrous network structure of the leather, composed of thin and tight collagen fibers. The BOD5/COD ratio of the effluent from the experimental trial was determined to be 0.52, suggesting that the fatliquor developed is a biodegradable product. Finally, the antifungal capabilities of the fatliquor-treated leather were tested against four different fungus species: Aspergillus niger, Aspergillus flavus, Penicillium notatum, and Candida albicans, and the treated leather sample shown favorable antifungal activity.

Removal efficiencies of microplastics of the three largest drinking water treatment plants in Bangladesh.

Drinking water treatment plants (DWTPs) are intended to provide safe water to the municipality, typically by treating surface waters from rivers, lakes, and streams. Regrettably, all of these water sources for DWTPs have been reported to be contaminated by microplastics (MPs). Hence, there is an urgent need to investigate the removal efficiencies of MPs from raw waters in the conventional DWTPs anticipating public health concerns. In this experiment, MPs in the raw and treated waters of the three major DWTPs of Bangladesh, having different water treatment processes, were evaluated. The concentrations of MPs in the inlet points of Saidabad Water Treatment Plant phase-1 and 2 (SWTP-1 and SWTP-2), which share a similar water source of the Shitalakshya River, were 25.7 ± 9.8 and 26.01 ± 9.8 items L-1. The third plant, Padma Water Treatment Plant (PWTP) utilizes water from the Padma River and had an initial MP concentration of 6.2 ± 1.6 items L-1. The studied DWTPs, with their existing treatment processes, were found to reduce the MP loads substantially. The final MP concentrations in treated waters of SWTP-1, SWTP-2, and PWTP were 0.3 ± 0.03, 0.4 ± 0.01, and 0.05 ± 0.02 items L-1 with the removal efficiencies of 98.8, 98.5, and 99.2 %, respectively. The considered size range of MP was 20 µm to <5000. Fragments and fibers were the two predominant MP shapes. In terms of polymer, the MPs were polypropylene (PP, 48 %), polyethylene (PE, 35 %), polyethylene terephthalate (PET, 11 %), and polystyrene (PS, 6 %). The field emission scanning electron microscopy-energy dispersive X-ray spectroscopy (FESEM-EDX) revealed the fractured and rough surfaces of the remaining MPs, which were also found to be contaminated with heavy metals, like lead (Pb), cadmium (Cd), chromium (Cr), arsenic (As), copper (Cu), and zinc (Zn). Hence, additional initiatives are required to remove the residual MPs from the treated waters to safeguard the city dwellers from potential hazards.

Corrigendum to "Development of a fabricated first-flush rainwater harvested technology to meet up the freshwater scarcity in a South Asian megacity, Dhaka, Bangladesh" [Heliyon 9 (1) (January 2023) Article e13027].

[This corrects the article DOI: 10.1016/j.heliyon.2023.e13027.].

Development of a fabricated first-flush rainwater harvested technology to meet up the freshwater scarcity in a South Asian megacity, Dhaka, Bangladesh.

The scarcity of freshwater in most of the megacities in the world is an important concern. In this regard, scientifically harvested rainwater could provide an effective measure to this crisis. In this attempt, we developed a cost-effective sensor-based automated first-flush rainwater harvesting system (RHS) to improve the freshwater scarcity and economic development of megacities like Dhaka, Bangladesh. To investigate the performance of the developed system, a suit of representative rainwater samples was systematically collected, preserved, and assessed between the months of July-December 2021 for water quality parameters such as physicochemical (pH, EC, TDS, DO, hardness, and alkalinity), anions (F-, Cl-, NO2 -, NO3 -, Br-, and SO4 2-), elemental (Ca, Mg, Cr, As, Cd, Hg, Pb, Be, Ni, Se, and Fe), and microbial contamination analysis. A Multiparameter digital meter and a titrimetric method were employed for measuring the physicochemical properties whereas elemental concentration was detected using an inductively coupled plasma-mass spectrometer and atomic absorption spectrometer. The changes in microbial contamination in the preserved rainwater were investigated from time to time during the whole experimental period. The findings showed that the mean pH (6.90) and concentrations (mg/L) of other concerning parameters such as TDS (15.5), DO (7.26), hardness (14.9), Cl- (3.59), NO3 - (4.84), SO4 2- (4.62), Fe (<0.2), Cr (0.086 µg/L), As (0.224 µg/L), Cd (0.260 µg/L), Hg (0.270 µg/L), and Pb (5.530 µg/L) in the harvested rainwater samples were below the WHO drinking water guidelines and literature data implying that the harvested rainwater derived from the developed RHS is completely safe for drinking and other uses even in respect to the microbial contamination (total bacterial counts: 0-15 CFU/mL, and total and fecal coliform less than 1.8 MPN/100 mL) for long storage. Hence, this technology has a huge opportunity to mitigate safe freshwater scarcity and groundwater depletion issues, especially in megacities such as Dhaka, Bangladesh.