Nanoribbon Yarn with Versatile Inorganic Materials.

Nanomaterial-based yarns have been actively developed owing to their advantageous features, namely, high surface-area-to-volume ratios, flexibility, and unusual material characteristics such as anisotropy in electrical/thermal conductivity. The superior properties of the nanomaterials can be directly imparted and scaled-up to macro-sized structures. However, most nanomaterial-based yarns have thus far, been fabricated with only organic materials such as polymers, graphene, and carbon nanotubes. This paper presents a novel fabrication method for fully inorganic nanoribbon yarn, expanding its applicability by bundling highly aligned and suspended nanoribbons made from various inorganic materials (e.g., Au, Pd, Ni, Al, Pt, WO3, SnO2, NiO, In2O3, and CuO). The process involves depositing the target inorganic material on a nanoline mold, followed by suspension through plasma etching of the nanoline mold, and twisting using a custom-built yarning machine. Nanoribbon yarn structures of various functional inorganic materials are utilized for chemical sensors (Pd-based H2 and metal oxides (MOx)-based green gas sensors) and green energy transducers (water splitting electrodes/triboelectric nanogenerators). This method is expected to provide a comprehensive fabrication strategy for versatile inorganic nanomaterials-based yarns.

Nanostructure engineering in organic semiconductor devices toward interface matching.

The performance of organic semiconductor devices with heterojunctions between the organic semiconductors and electrodes can be improved by reducing the contact resistance. In this study, we have developed nanopatterned electrodes that gradually change the impedance at the interface between the metal and organic semiconductor in organic devices, which were fabricated in periodic patterns using nanoimprint lithography (NIL). The imprint pattern spacing was changed to control the interface between the metal and organic semiconductor to ensure smooth carrier injection. We analyzed the carrier injection based on the pattern spacing of the electrode interface using electrical current-voltage (I-V) and capacitance-frequency (C-F) measurements in the diode. Subsequently, we analyzed the improved current mechanism through numerical simulation. Therefore, this study suggests the possibility of designing the interface of an organic device using the nanostructure between the organic semiconductor and carrier injection electrode.

Density-controlled electrochemical synthesis of ZnO nanowire arrays using nanotextured cathode.

Zinc oxide (ZnO) nanowires fabricated via wet chemical synthesis on flexible polymer substrates are inherently unstable against mechanical bending stress because of their high density and weak adhesion to the substrate. We introduce a novel method for controlling the density of such ZnO nanowire arrays using a three-dimensional corrugated metal substrate. These metal substrates, featuring extruded and recessed patterns fabricated via nanoimprint lithography, were employed as cathodes during the electrochemical deposition of ZnO nanowire arrays. The ZnO nanowire arrays synthesized on the patterned metal thin film exhibited smaller diameters and lower densities compared to those on non-patterned metal films. This reduction in density can be attributed to aligned nucleation and limited growth on the patterned metal surface. Crucially, ZnO nanowires synthesized on patterned metal substrates displayed remarkable mechanical robustness against external forces, a direct consequence of their reduced density. In contrast, nanowires synthesized on non-patterned metal substrates were broken under mechanical bending. Detailed morphological analyses performed after mechanical bending tests confirm that ZnO nanowires synthesized on nanoimprinted metal electrodes exhibited enhanced mechanical characteristics compared to those on non-patterned metal electrodes. These findings clearly demonstrate the promise of utilizing density-controlled ZnO nanowires in piezoelectric devices.

Using machine learning to improve multi-qubit state discrimination of trapped ions from uncertain EMCCD measurements.

This paper proposes a residual network (ResNet)-based convolutional neural network (CNN) model to improve multi-qubit state measurements using an electron-multiplying charge-coupled device (EMCCD). The CNN model is developed to simultaneously use the intensity of pixel values and the shape of ion images in determining the quantum states of ions. In contrast, conventional methods use only the intensity values. In our experiments, the proposed model achieved a 99.53±0.14% mean individual measurement fidelity (MIMF) of 4 trapped ions, reducing the error by 46% when compared to the MIMF of maximum likelihood estimation method of 99.13±0.08%. In addition, it is experimentally shown that the model is also robust against the ion image drift, which was tested by intentionally shifting the ion images.

Water-resistant free-standing DNA-complexed films with antioxidant and H2O2-responsive activity.

Water-insoluble DNA complexes are suitable for producing free-standing DNA films due to their low water sensitivity, which prevents their rapid degradation in aqueous environments. Here, we proposed two types of free-standing films that exhibit low dissolution rates in water: low molecular weight chitosan (LCS)-DNA films and phosphatidylcholine (PC)-cetyltrimethylammonium (CTMA)-DNA films. The structure and binding characteristics of the LCS-DNA and PC-CTMA-DNA complexes were investigated with UV-Vis spectroscopy and via the fluorescent characteristics of daunorubicin bound to them. A simple drop-casting method was then adopted for both complexes to fabricate free-standing films. An increase in antioxidant activity and water-resistance of the LCS-DNA DNA film was observed when the molar ratio of LCS to DNA was increased, but the dissolution rate of the LCS-DNA film was also dependent on the ionic strength of the dissolving solution. Fourteen days were required to dissolve the LCS-DNA film in deionized water, whereas immediate dissolution was observed in 1× phosphate-buffered saline (PBS). Deformation of the PC-CTMA-DNA film was accelerated by H2O2, such that the PC-CTMA-DNA film was degraded after 21 days of immersion in 1× PBS with H2O2. Due to the low dissolution rate in water and antioxidant activity, the free-standing LCS-DNA film should be able to store and protect embedded clinical materials, such as proteins and intercalating drugs, from moisture and enable localized delivery of treatments to designated sites. Also, the free-standing PC-CTMA-DNA film could be a biocompatible candidate for use as a membrane or sensor for detecting the levels of reactive oxygen species.

An Autoscaling System Based on Predicting the Demand for Resources and Responding to Failure in Forecasting.

In recent years, the convergence of edge computing and sensor technologies has become a pivotal frontier revolutionizing real-time data processing. In particular, the practice of data acquisition-which encompasses the collection of sensory information in the form of images and videos, followed by their transmission to a remote cloud infrastructure for subsequent analysis-has witnessed a notable surge in adoption. However, to ensure seamless real-time processing irrespective of the data volume being conveyed or the frequency of incoming requests, it is vital to proactively locate resources within the cloud infrastructure specifically tailored to data-processing tasks. Many studies have focused on the proactive prediction of resource demands through the use of deep learning algorithms, generating considerable interest in real-time data processing. Nonetheless, an inherent risk arises when relying solely on predictive resource allocation, as it can heighten the susceptibility to system failure. In this study, a framework that includes algorithms that periodically monitor resource requirements and dynamically adjust resource provisioning to match the actual demand is proposed. Under experimental conditions with the Bitbrains dataset, setting the network throughput to 300 kB/s and with a threshold of 80%, the proposed system provides a 99% performance improvement in terms of the autoscaling algorithm and requires only 0.43 ms of additional computational overhead compared to relying on a simple prediction model alone.

Enhancement of refractive index sensing for an infrared plasmonic metamaterial absorber with a nanogap.

An infrared plasmonic metamaterial absorber with a nanogap was numerically and experimentally investigated as a refractive index sensor. We experimentally demonstrated large enhancements of both sensitivity (approximately 1091 nm/refractive index unit) and figure of merit (FOM*; approximately 273) owing to the nanogap formation in the metamaterial absorber to achieve perfect absorption (99%). The refractive index sensing platform was fabricated by producible nanoimprint lithography and isotropic dry etching processes to have a large area and low cost while providing a practical solution for high-performance plasmonic biosensors.

Wide-viewing full-color depthmap computer-generated holograms.

An efficient synthesis algorithm for wide-viewing full-color depthmap computer-generated holograms is proposed. We develop a precise computational algorithm integrating wave-optic geometry-mapping, color-matching, and noise-filtering to multiplex multiview elementary computer-generated holograms (CGHs) into a single high-definition CGH without three-dimensional perspective distortion or color dispersion. Computational parallelism is exploited to achieve significant computational efficiency improvement in the production throughput of full-color wide-viewing angle CGHs. The proposed algorithm is verified through the full-color binary hologram reconstruction experiments utilizing an off-axis R·G·B simultaneous illumination method, which suggests the feasibility of the full-color sub-wavelength binary spatial light modulator technology.

Observation of Hong-Ou-Mandel interference with scalable Yb+-photon interfaces.

We present a compact optical design for a scalable trapped ion quantum processor employing a single high numerical aperture lens for the excitation of ions and collection of photons, both of which are essential for remote entanglement generation. We verified the design by performing a quantum interference experiment between two photons generated by two sets of the proposed design and observed a 82(3) % suppression of coincidence within 8.13 ns time window when the two photons became indistinguishable. This design can be extended for the simultaneous generation of multiple pairs of entangled qubits with existing fiber-array devices.

Perovskite Light-Emitting Diodes with Improved Outcoupling Using a High-Index Contrast Nanoarray.

Organic-inorganic hybrid perovskite light-emitting diodes (PeLEDs) are promising for next-generation optoelectronic devices due to their potential to achieve high color purity, efficiency, and brightness. Although the external quantum efficiency (EQE) of PeLEDs has recently surpassed 20%, various strategies are being pursued to increase EQE further and reduce the EQE gap compared to other LED technologies. A key point to further boost EQE of PeLEDs is linked to the high refractive index of the perovskite emissive layer, leading to optical losses of more than 70% of emitted photons. Here, it is demonstrated that a randomly distributed nanohole array with high-index contrast can effectively enhance outcoupling efficiency in PeLEDs. Based on a comprehensive optical analysis on the perovskite thin film and outcoupling structure, it is confirmed that the nanohole array effectively distributes light into the substrate for improved outcoupling, allowing for 1.64 times higher light extraction. As a result, highly efficient red/near-infrared PeLEDs with a peak EQE of 14.6% are demonstrated.

Printed fabric heater based on Ag nanowire/carbon nanotube composites.

The increasing demand for smart fabrics has inspired extensive research in the field of nanomaterial-based wearable heaters. However, existing stretchable heaters employ polymer substrates, and hence require additional substrate-fabric bonding that can result in high thermal contact resistance. Moreover, currently used stretchable fabric heaters suffer from high sheet resistance and require complex fabrication processes. In addition, conventional fabrication methods do not allow for patternability, thus hindering the fabrication of wearable heaters with diverse designs. Herein, we propose an improved spray coating method well suited for the preparation of patternable heaters on commercial fabrics, combining the structural stability of carbon nanotubes with the high electrical conductivity of Ag nanowires to fabricate a stretchable fabric heater with excellent mechanical (stretchability ≈ 50%) and electrical (sheet resistance ≈ 22 Ω sq-1) properties. The fabricated wearable heater reaches typical operating temperatures of 35 °C-55 °C at a low driving voltage of 3-5 V with a proper surface power density of 26.6-72.2 [Formula: see text] (heater area: [Formula: see text]) and maintains a stable heating temperature for more than 30 h. This heater shows a stable performance even when folded or rolled, thus being well suited for the practical wearable applications.

Dual nanotransfer printing for complementary plasmonic biosensors.

One of the main challenges in the widespread utilization of localized plasmon resonance-based biosensors is the fabrication of large-area and low-cost plasmonic nanostructures. In this work, we fabricated large-area and low-cost complementary plasmonic biosensors such as nanohole and nanodisk arrays using dual nanotransfer printing (NTP) with a single metal deposition and a single reusable mold. The suspended nanohole arrays and the suspended nanodisk arrays were fabricated using the subsequent dry etching process. We confirmed a maximum enhancement in bulk sensitivity in experiments and simulations by controlling the vertical and lateral etching depths of the dielectric layer underneath the gold (Au) nanohole and nanodisk arrays. Furthermore, we show that the surface sensitivity evaluated by atomic layer deposition of aluminum oxide increased because appropriate vertical and lateral etching depths allow the target analyte to access the additional near-field formed at the bottom of the Au nanostructure. The dual NTP method provides a practical solution for the realization of large-area and low-cost label-free plasmonic biosensing systems, with a reduction in complexity and cost of the fabrication process of complementary plasmonic structures and metasurfaces.

Shape-Controlled 3D Periodic Metal Nanostructures Fabricated via Nanowelding.

A novel method for fabricating 3D metallic nanostructures to be used in polarized color filters based on nanoimprint lithography, electron-beam evaporation, and nanowelding is proposed. The shape of the nanostructures can be controlled by adjusting the temperature for the nanowelding process. Ag nanowires deposited on polymer patterns are accumulated by the nanowelding process to build up diverse 3D nanostructures. The morphologies of the fabricated 3D nanostructures are analyzed using scanning electron microscopy, atomic force microscopy, and focused ion beam; the heating temperature is varied from 90 to 130 °C in steps of 10 °C. In order to analyze the recrystallization phenomenon after welding, transmission electron microscopy is utilized. The 3D metallic nanostructure has different morphologies and optical properties corresponding to welding temperature conditions and accumulated layer thicknesses. Based on preliminary experimental results, the process parameters are optimized and a polarized color filter is fabricated. Optical characteristics of the filter are evaluated using polarizer and spectrometer. Through this work, it is shown that the proposed method is an effective way to realize various 3D metallic nanostructures for special optical properties, therefore the method based on nanowelding can be utilized in fabrication of functional metamaterials, optical filters, biosensors, and others.

Plasmonic color filters fabricated via oxide-based nanotransfer printing.

Plasmonic filters have recently become a topic of significant interest because they are suitable for a wide range of applications. However, effective fabrication of plasmonic filters remains a challenge. In this paper, we demonstrate a simple method for fabricating plasmonic color filters based on nanotransfer printing (nTP) , using SiO2 as a hard mask for Al etching. nTP was performed on a 100 nm Al layer deposited on a glass wafer substrate with a 10 nm Al layer and a 20 nm SiO2 layer with a nanohole pattern. The 10 nm Al layer and 20 nm SiO2 layers were previously transferred from a polymer stamp prepared to create patterns of subwavelength-sized holes. The plasmonic filters were ultimately fabricated using the SiO2 layer as a hard mask to selectively etch the Al layer. The optical properties of the fabricated plasmonic filters were evaluated using experimental and simulation tools. In addition, we analyzed the results of nTP on the Al and SiO2 films by varying the temperature, pressure, and SiO2-film thickness. We believe that this technique is a promising method for fabricating nanostructures and for widening the scope of practical application of plasmonics because of its high efficiency and cost-effectiveness.

Phase, current, absorbance, and photoluminescence of double and triple metal ion-doped synthetic and salmon DNA thin films.

We fabricated synthetic double-crossover (DX) DNA lattices and natural salmon DNA (SDNA) thin films, doped with 3 combinations of double divalent metal ions (M2+)-doped groups (Co2+-Ni2+, Cu2+-Co2+, and Cu2+-Ni2+) and single combination of a triple M2+-doped group (Cu2+-Ni2+-Co2+) at various concentrations of M2+ ([M2+]). We evaluated the optimum concentration of M2+ ([M2+]O) (the phase of M2+-doped DX DNA lattices changed from crystalline (up to ([M2+]O) to amorphous (above [M2+]O)) and measured the current, absorbance, and photoluminescent characteristics of multiple M2+-doped SDNA thin films. Phase transitions (visualized in phase diagrams theoretically as well as experimentally) from crystalline to amorphous for double (Co2+-Ni2+, Cu2+-Co2+, and Cu2+-Ni2+) and triple (Cu2+-Ni2+-Co2+) dopings occurred between 0.8 mM and 1.0 mM of Ni2+ at a fixed 0.5 mM of Co2+, between 0.6 mM and 0.8 mM of Co2+ at a fixed 3.0 mM of Cu2+, between 0.6 mM and 0.8 mM of Ni2+ at a fixed 3.0 mM of Cu2+, and between 0.6 mM and 0.8 mM of Co2+ at fixed 2.0 mM of Cu2+ and 0.8 mM of Ni2+, respectively. The overall behavior of the current and photoluminescence showed increments as increasing [M2+] up to [M2+]O, then decrements with further increasing [M2+]. On the other hand, absorbance at 260 nm showed the opposite behavior. Multiple M2+-doped DNA thin films can be used in specific devices and sensors with enhanced optoelectric characteristics and tunable multi-functionalities.

Cyber Physical Systems for User Reliability Measurements in a Sharing Economy Environment.

As the sharing economic market grows, the number of users is also increasing but many problems arise in terms of reliability between providers and users in the processing of services. The existing methods provide shared economic systems that judge the reliability of the provider from the viewpoint of the user. In this paper, we have developed a system for establishing mutual trust between providers and users in a shared economic environment to solve existing problems. In order to implement a system that can measure and control users' situation in a shared economic environment, we analyzed the necessary factors in a cyber physical system (CPS). In addition, a user measurement system based on a CPS structure in a sharing economic environment is implemented through analysis of the factors to consider when constructing a CPS.

Binary particle swarm optimized 2 × 2 power splitters in a standard foundry silicon photonic platform.

Compact power splitters designed ab initio using binary particle swarm optimization in a 2D mesh for a standard foundry silicon photonic platform are studied. Designs with a 4.8 µm×4.8 µm footprint composed of 200 nm×200 nm and 100 nm×100 nm cells are demonstrated. Despite not respecting design rules, the design with the smaller cells had lower insertion losses and broader bandwidth and showed consistent behavior across the wafer. Deviations between design and experiments point to the need for further investigations of the minimum feature dimensions.

Rapid Low-Temperature 3D Integration of Silicon Nanowires on Flexible Substrates.

The vertical integration of 1D nanostructures onto the 2D substrates has the potential to offer significant performance gains to flexible electronic devices due to high integration density, large surface area, and improved light absorption and trapping. A simple, rapid, and low temperature transfer bonding method has been developed for this purpose. Ultrasonic vibration is used to achieve a low temperature bonding within a few seconds, resulting in a polymer-matrix-free, electrically conducting vertical assembly of silicon nanowires (SiNWs) with a graphene/PET substrate. The microscopic structure, and mechanical and electrical characteristics of the interface between the transferred SiNW array and graphene layer are subsequently investigated, revealing that this creates a mechanically robust and electrically Ohmic contact. This newly developed ultrasonic transfer bonding technique is also found to be readily adaptable for diverse substrates of both metal and polymer. It is therefore considered as a valuable technique for integrating 1D vertical nanostructures onto the 2D flexible substrates for flexible photovoltaics, energy storage, and water splitting systems.

Wavelength-size hybrid Si-VO(2) waveguide electroabsorption optical switches and photodetectors.

Ultra-compact waveguide electroabsorption optical switches and photodetectors with micron- and sub-micron lengths and compatible with silicon (Si) waveguides are demonstrated using the insulator-metal phase transition of vanadium dioxide (VO(2)). A 1 µm long hybrid Si-VO(2) device is shown to achieve a high extinction ratio of 12 dB and a competitive insertion loss of 5 dB over a broad bandwidth of 100 nm near λ = 1550 nm. The device, operated as a photodetector, can measure optical powers less than 1 µW with a responsivity in excess of 10 A/W. With volumes that are about 100 to 1000 times smaller than today's active Si photonic components, the hybrid Si-VO(2) devices show the feasibility of integrating transition metal oxides on Si photonic platforms for nanoscale electro-optic elements.

Electrically controllable extraordinary optical transmission in gold gratings on vanadium dioxide.

Highly tunable optical transmission through one-dimensional gold gratings patterned on top of a film of the phase transition material, vanadium dioxide (VO2), is demonstrated. Dense electrical integration is enabled by grating features that also function as electrical contacts to the VO2. Extraordinary optical transmission is observed in the VO2 insulator phase, and the optical transmission is extinguished by up to about 6 dB in a 170 nm thick VO2 film. Measurements of gratings with varying duty cycles demonstrate the dependence of the optical transmission and tuning on the device geometry.