Effects on gait kinematics, pedobarography, functional and subjective results after isolated chopart injury.

BACKGROUND: This study analysed changes in gait and pedobarography and subjective and functional outcomes after isolated Chopart joint injury. METHODS: The results of 14 patients were reviewed. Kinematic 3D gait analysis, comparative bilateral electromyography (EMG) and pedobarography were performed. RESULTS: On the injured side, the 3D gait analysis showed a significantly increased internal rotation and decreased external rotation of the hip and significantly decreased adduction and decreased range of motion (ROM) for the ankle. On the healthy side, the pedobarography revealed a significantly increased mean force in the forefoot, an increased peak maximum force and an increased maximum pressure in the metatarsal. When standing, significantly more weight was placed on the healthy side. The EMG measurements showed no significant differences between the healthy and injured legs. CONCLUSIONS: After isolated Chopart injuries, significant changes in gait and pedobarography can be seen over the long term.

Physiological responses, self-reported health effects, and cognitive performance during exposure to carbon dioxide at 20 000 ppm.

In this study, 24 subjects (20-58 years) were exposed to carbon dioxide (CO2 ) at 770 ppm and 20 000 ppm in an exposure laboratory for 4-h, including 2 × 15 min of cycling to investigate the effects on acid-base balance, physiological responses, cognitive performance and acute health. Capillary blood analysis, heart rate, respiratory rate, divided attention, flexibility, and sustained attention from the Test Battery for Attentional Performance (TAP), critical flicker fusion frequency (CFF), and self-reported symptoms were measured before, during, and after the 4-h exposure. Blood pH decreased and partial pressure of carbon dioxide (pCO2 ) increased significantly when exposed to 20 000 ppm CO2 compared to 770 ppm. However, the values remained within the normal range. In addition, respiratory rate increased slightly but significantly at 20 000 ppm CO2 . No significant changes in heart rate, CFF, task performance or acute health were found. In sum, the findings suggest that the observed changes in acid-base balance and ventilation can be classified as physiological adaptation responses. Impairment of cognitive performance is not expected from exposure to 20 000 ppm CO2 , neither as direct effect on central nervous system function nor as a distraction related to perception of health effects.

No inflammatory effects after acute inhalation of barium sulfate particles in human volunteers.

BACKGROUND: Most threshold limit values are based on animal experiments. Often, the question remains whether these data reflect the situation in humans. As part of a series of investigations in our exposure lab, this study investigates whether the results on the inflammatory effects of particles that have been demonstrated in animal models can be confirmed in acute inhalation studies in humans. Such studies have not been conducted so far for barium sulfate particles (BaSO4), a substance with very low solubility and without known substance-specific toxicity. Previous inhalation studies with zinc oxide (ZnO), which has a substance-specific toxicity, have shown local and systemic inflammatory respones. The design of these human ZnO inhalation studies was adopted for BaSO4 to compare the effects of particles with known inflammatory activity and supposedly inert particles. For further comparison, in vitro investigations on inflammatory processes were carried out. METHODS: Sixteen healthy volunteers were exposed to filtered air and BaSO4 particles (4.0 mg/m3) for two hours including one hour of ergometric cycling at moderate workload. Effect parameters were clinical signs, body temperature, and inflammatory markers in blood and induced sputum. In addition, particle-induced in vitro-chemotaxis of BaSO4 was investigated with regard to mode of action and differences between in vivo and in vitro effects. RESULTS: No local or systemic clinical signs were observed after acute BaSO4 inhalation and, in contrast to our previous human exposure studies with ZnO, no elevated values of biomarkers of inflammation were measured after the challenge. The in vitro chemotaxis induced by BaSO4 particles was minimal and 15-fold lower compared to ZnO. CONCLUSION: The results of this study indicate that BaSO4 as a representative of granular biopersistent particles without specific toxicity does not induce inflammatory effects in humans after acute inhalation. Moreover, the in vitro data fit in with these in vivo results. Despite the careful and complex investigations, limitations must be admitted because the number of local effect parameters were limited and chronic toxicity could not be studied.

Hierarchical Ceramic Coating Reduces Adherence of Cells, Blood, Bacteria, and Tissue on Titanium Microsurgical Instruments.

BACKGROUND: Progress in the field of microsurgery allows more detailed reconstructions of the smallest tissue structures. The applied instruments are left with biological residues after coming into contact with body fluids or tissue, leading to compromised surgical precision. Designing of residue-free innovative instruments would reduce the necessity of subsidiary practices and would improve the surgical precision. METHODS: We designed a ceramic coating (Lotus ceramic coating system 26-LCC-26) that exhibits self-cleaning surface properties on coated titanium specimens. A titanium surface was modified by blasting technology and electropolishing, followed by applying a high-performance ceramic and sol-gel finish layer. The physical surface characterization was performed by scanning electron microscopy and measuring the contact angle. The cell-repellent properties and cytotoxicity were investigated using live-dead staining, BrdU, and lactate dehydrogenase assay. Furthermore, bacterial and fluid-adhesion tests were performed. Finally, blood compatibility was analyzed according to DIN ISO 10993. RESULTS: The composite system LCC-26 increased the hydrophobic character of the titanium surface (the water contact angle of 74.9 degrees was compared with 62.7 degrees of the uncoated native titanium; p < 0.01) and led to the fluid and cell-repellent properties shown by the reduction in fibroblast adherence by ∼50.7% (p < 0.05), the reduction in Staphylococcus aureus pathogen colonization by 74.1% (p < 0.001), and the decrease in erythrocyte adherence by 62.9% (p < 0.01). Furthermore, the LCC-26 coated titanium microforceps dipped in human whole blood exhibited blood-repellent character (reduction in blood adherence by 46.1%; p < 0.05). Additionally, cyto- and hemocompatibility was guaranteed in direct and indirect tests. CONCLUSION: Titanium surface modification on surgical instruments exhibits cell, bacteria, and blood-repellent properties with a full guarantee of cyto- and hemocompatibility. Thus, innovatively coated instruments could contribute to increased precision during microsurgical interventions and optimized medical operation routines in the future.

Health effects after inhalation of micro- and nano-sized zinc oxide particles in human volunteers.

Inhalation of ZnO particles can cause inflammation of the airways and metal fume fever. It is unclear if different sizes of the particles alter these effects. However, various studies report higher biological activity of other nano-sized particles compared to microparticles. No effects at all were observed after inhalation of micro- and nano-sized zinc oxide (ZnO) particle concentrations of 0.5 mg/m3. Studies with different particle sizes of ZnO at higher exposures are not available. Accordingly, we hypothesized that inhalation of nano-sized ZnO particles induces stronger health effects than the inhalation of the same airborne mass concentration of micro-sized ZnO particles. 16 healthy volunteers (eight men, eight women) were exposed to filtered air and ZnO particles (2.0 mg/m3) for 2 h (one session with nano- and one with micro-sized ZnO) including 1 h of cycling at moderate workload. Effect parameters were symptoms, body temperature, inflammatory markers in blood and in induced sputum. Induced sputum was obtained at baseline examination, 22 h after exposure and at the end of the final test. The effects were assessed before, immediately after, about 22 h after, as well as two and three days after each exposure. Neutrophils, monocytes and acute-phase proteins in blood increased 22 h after micro- and nano-sized ZnO exposure. Effects were generally stronger with micro-sized ZnO particles. Parameters in induced sputum showed partial increases on the next day, but the effect strengths were not clearly attributable to particle sizes. The hypothesis that nano-sized ZnO particles induce stronger health effects than micro-sized ZnO particles was not supported by our data. The stronger systemic inflammatory responses after inhalation of micro-sized ZnO particles can be explained by the higher deposition efficiency of micro-sized ZnO particles in the respiratory tract and a substance-specific mode of action, most likely caused by the formation of zinc ions.

Anatomical repair and ligament bracing of Schenck III and IV knee joint dislocations leads to acceptable subjective and kinematic outcomes.

PURPOSE: The aim of this study was to analyze the outcomes of anatomical repair and ligament bracing for Schenck III and IV knee dislocation (KD). METHODS: The results of 27 patients (15 and 12 cases of Schenck III and IV KD, respectively) after a mean follow-up of 18.1 ± 12.1 months (range 6-45 months) were retrospectively reviewed. Twenty-two patients suffered high-kinetic-energy accidents, whereas five patients suffered ultralow-velocity (ULV) trauma due to obesity. The outcome measures were the Lysholm score, Hospital for Special Surgery (HSS) knee score, Knee Society Score (KSS), Knee Injury and Osteoarthritis Outcome Score (KOOS) and Short Form 36 (SF-36) score. A kinematic 3D gait analysis with five walking trials was performed to compare the patients and healthy controls. RESULTS: The mean KSS, HSS score, Lysholm score, and KOOS were 77.4 ± 14.4, 84.6 ± 11.2, 81.5 ± 10.4, and 67.3 ± 16.8, respectively. No intra- or postoperative complications occurred. The mean range of motion deficiency compared to the healthy side was 24.4 ± 18.5°. Ten patients had first-degree residual laxity of the anterior cruciate ligament; 12 and 2 patients had first- and second-degree residual laxity of the collateral ligament, respectively. Five patients underwent additional arthroscopic arthrolysis due to arthrofibrosis at an average of 6.2 ± 1.9 months (range 4-9 months) after the initial surgery. The 3D gait analysis showed no major differences in joint stability or movement between the patients and healthy controls. Only the ULV trauma patients had significantly lower outcome scores and showed larger kinematic deviations in joint movement during the gait analysis. CONCLUSION: Anatomical repair with ligament bracing is a suitable surgical procedure in the treatment of KD and provides evidence in clinical practice with the benefit of early, definitive repair and preservation of the native ligaments. Patients reach acceptable subjective and objective functional outcomes, including mainly normalized gait patterns during short-term follow-up, with only minor changes in kinematics and spatial-temporal characteristics. Obese patients who suffered ULV trauma showed significantly inferior outcomes with larger deviations in joint kinematics. LEVEL OF EVIDENCE: Level III.

Biomechanical comparison of screw osteosyntheses and anatomical plating for coronoid shear fractures of the ulna.

INTRODUCTION: Among the few techniques described for the treatment of coronoid fractures, osteosynthesis techniques include screw osteosynthesis from anterior to posterior (AP) or from posterior to anterior (PA) and plate osteosynthesis. The aim of this study was to test the biomechanical stability of screw osteosynthesis and plate osteosynthesis using anatomical plates in coronoid process fractures. MATERIALS AND METHODS: On a total of 25 biomechanical synthetical ulnae, a coronoid shear fracture including 70% of the coronoid height was simulated. Osteosynthesis was then performed using two 2.7 mm screws from anterior, posterior and with use of three different anatomical plates of the coronoid process. For the biomechanical testing, axial load was applied to the fragment with 1000 cycles from 5 to 250 N, load to failure and load at 100 µm displacement. Displacements were measured using a point-based three-dimensional motion analysis system. RESULTS: Osteosynthesis using the PA-screw showed significant more displacement during cyclic loading compared with all other osteosyntheses (0.99 mm), whereas AP-screw showed the smallest displacement (0.10 mm) during cyclic loading. The PA-screw technique showed a significant lower load to failure compared to all other osteosynthesis with the highest load in AP-screw osteosynthesis. The load for 100 µm displacement was the smallest in PA-screw with a significant difference to the AP-screw and one plate osteosynthesis. CONCLUSION: Osteosynthesis of large coronoid shear fractures with two small-fragment screws from anterior allows stable fixation that is not inferior to anterior plate osteosynthesis and might be an alternative in specific fracture types. Posterior screw fixation was found as the weakest fixation method. LEVEL OF EVIDENCE: Basic science study.

Whole Blood Assay as a Tool to Describe the Effects of Zinc Oxide Exposure on Innate Immunity.

Inhalation of high concentrations of zinc oxide (ZnO) particles may cause metal fume fever. A useful tool to characterize the reactivity of innate immune cells of an individual, e.g., after in vivo exposure, is the whole blood assay (WBA). The measurable outcome of WBA is the release of cytokines, especially pro-inflammatory and pyrogenic cytokines induced by stimulation in vitro. The aim of the study was to evaluate whether inhalation of nano-sized zinc oxide particles modifies the results of WBA from healthy blood donors. Sixteen healthy subjects were exposed to filtered air and ZnO particles (0.5, 1.0, and 2.0 mg/m3) for 4 h on four different days. Blood was collected before and 24 h after exposure, and ex vivo stimulation of the whole blood was performed using different endotoxin concentrations. The release of interleukin (IL)-1ß and IL-8 after 22-h incubation was quantified with specific immunoassays. The dose-response relationship of ex vivo stimulation with different endotoxin concentrations was not affected by previous ZnO exposure. However, based on the previously established calculation models, changes due to ZnO exposure could be described. The range of cytokine release in WBA was calculated for the whole group of blood donors, for the subgroups of low and high responders (each n = 8), and on the individual level. Most changes were observed after 0.5 mg/m3 ZnO exposure. Higher ZnO exposure did not yield higher effects. We conclude that the effects of inhalation of nano-sized ZnO particles in blood of healthy donors using the WBA could be determined. However, it should be noted that cytokine release as outcome of WBA is not a marker of disease.

Pullout strength and failure mode of industrially manufactured and self-made all-suture anchors: a biomechanical analysis.

BACKGROUND: This study presents a new technique for assembling an all-suture anchor from existing medical products. The biomechanical characteristics of this self-made anchor (SMA) are compared with those of an industrially manufactured all-suture anchor. METHODS: The SMAs were made from established medical products (FiberWire #2 and 2-mm FiberTape; Arthrex, Naples, FL, USA). Pretesting was performed in biphasic polyurethane foam blocks. In the next step, 10 SMAs and 10 industrially made anchors (IMAs; 1.8-mm double-loaded Y-Knot Flex all-suture anchor; ConMed Linvatec, Largo, FL, USA) were applied with an insertion tool and tested in fresh porcine femora using a servohydraulic testing system, with a preload of 10 N and a displacement rate of 12.5 mm/s. Pullout strength and failure mode were recorded. RESULTS: The mean load at failure in the foam blocks was 459 ± 124 N in the SMA group and 538 ± 83 N in the IMA group. In porcine bone, failure occurred at 461 ± 102 N in the SMA group and 431 ± 135 N in the IMA group. The differences in pullout strength between the 2 types of anchor were not statistically significant, either in the foam blocks (P = .17) or in porcine bone (P = .62). CONCLUSION: A handmade all-suture anchor using 2 high-strength sutures woven into a 2-mm strip of high-strength tape did not show statistically different failure loads in polyurethane foam or in porcine metaphyseal bone in comparison with a commercially produced double-loaded all-suture anchor. The principal mode of failure in porcine bone in both groups was anchor pullout.

Ethyl acrylate: influence of sex or atopy on perceptual ratings and eye blink frequency.

Occupational exposure limits (OELs) are derived for protection from health hazards, assuming that exposed subjects are healthy adult workers. Whether differences in susceptibility to sensory irritation effects from airborne chemicals have to be taken into account is currently under discussion. Thus, we chose atopics as a healthy but possibly susceptible subpopulation that can be identified with a clinical test. To investigate the influence of sex or atopy on sensitivity to airborne chemicals, 22 subjects were exposed for 4 h to ethyl acrylate at three concentrations: 0.05 ppm (odor threshold; sham), 5 ppm (constant), and varying exposure between 0 and 10 ppm. Odor intensity decreased and eye irritation ratings increased in a dose-dependent manner, reflecting the time course of the exposure scenarios. The reports of moderate-to-strong eye irritation were verified by significant increases in eye blink frequency. Our results show that women reported subjective eye irritation to an increasing degree. However, these sex-related differences in ratings could not be verified by objective assessment of eye blink frequency. Atopic subjects reported higher odor intensity than non-atopic subjects, but only during the sham (odorous but not irritating) exposure condition. Differences in ratings on annoyance, and eye or nose irritation were not found. Furthermore, the study revealed that atopic subjects might belong to a group of subjects with frequent eye blink activity. Although the relative increase in blink rates was more pronounced in non-atopic subjects, atopic subjects had significant higher blink rates at the end of the exposure to varying ethyl acrylate concentrations. Our results do not support that atopy enhances chemosensory effects if only the increase of blink rates and not the absolute height are considered as adverse effect. Nevertheless, the results indicate that individuals with frequent eye blink activity should be distinguished from those with normal eye blink activity while investigating blink rates as objective parameter of eye irritation.