Effect of Penetration Enhancer on the Structure of Stratum Corneum: On-Site Study by Confocal Polarized Raman Imaging.

Keratin and lipid structures in the stratum corneum (SC) are closely related to the SC barrier function. The application of penetration enhancers (PEs) disrupts the structure of SC, thereby promoting infiltration. To quantify these PE-induced structural changes in SC, we used confocal Raman imaging (CRI) and polarized Raman imaging (PRI) to explore the integrity and continuity of keratin and lipid structures in SC. The results showed that water is the safest PE and that oleic acid (OA), sodium dodecyl sulfate (SDS), and low molecular weight protamine (LMWP) disrupted the ordered structure of keratin, while azone and liposomes had less of an effect on keratin. Azone, OA, and SDS also led to significant changes in lipid structure, while LMWP and liposomes had less of an effect. Establishing this non-invasive and efficient strategy will provide new insights into transdermal drug delivery and skin health management.

Sustainable Utilization of Surfactant-Free Microemulsion Regulated by CO2 for Treating Oily Wastes: A Interpretation of the Response Mechanism.

Surfactant-free microemulsions (SFMEs) have been explored extensively to avoid the residual surfactant problem caused by traditional surfactant microemulsions. Many researchers focused on the SFMEs with tertiary amine, which exhibited the typical CO2 response behavior. In this study, the phase diagram of the SFMEs consisting of tripropylamine (TPA), ethanol, and water was readily prepared via the measurements of electrical conductivity. The CO2 response behavior of SFME was confirmed by determination of conductivity and measurement of the average diameter of SFME, which was mainly dependent on the protonation of TPA induced by the additional CO2. The transition of protonated TPA to a more hydrophilic nature from lipophilicity to hydrophilicity should be responsible for the variation of SFME average diameter. In addition, the SFMEs exhibited remarkable solubilizing capacity of crude oil, and three types of SFMEs achieved more than 80% oil removal rate in the washing process of oil sands. It was noted that both oil-in-water and bicontinuous SFMEs could be circularly utilized at least three times with a relatively high oil removal rate (%). Our work provided the insight perspective on the mechanism of SFMEs with a CO2 response behavior.

Amphiphilic Janus Graphene Oxide Acts as a Corrosion Inhibitor to Mitigate the Corrosion Caused by a 1 M HCl Solution on Mild Steel.

Great aqueous dispersibility, a large specific surface area, and high impermeability make graphene oxide (GO) the ideal candidate for a high-performance corrosion inhibitor. Numerous symmetrical modification methods have been reported to enhance the adsorption of GO on metal surfaces in various corrosive media. This work aims to investigate the enhancement and mechanism of unilateral hydrophobic modification on the corrosion inhibition performance of GO. In this study, amphiphilic Janus GO (JGO) was prepared by grafting hydrophobic alkyl chains on one side of GO, and its anticorrosion performance was evaluated via weight loss experiments and electrochemical tests. The results revealed that the corrosion inhibition efficiency for Q235 mild steel (MS) in a 1 M HCl aqueous solution of 25 ppm JGO (81.08%) was much higher than that of GO at the same concentration (22.12%). Furthermore, the Langmuir adsorption isotherm and computational study demonstrated that the synergistic effect of physical adsorption and chemical adsorption promoted the hydrophilic side of JGO close to the surface of the metal, and the dense protective layer was formed by the hydrophobic chains toward the corrosive medium, which effectively hindered the corrosion of MS by the acidic liquid. This study emphasizes the significant role of asymmetrically modified hydrophobic alkyl chains in improving the corrosion prevention performance of GO and provides a perspective for the structural design of GO-based corrosion inhibitors.

Imidazolium-Based Polymeric Ionic Liquids with Short Alkyl Chains as Green Corrosion Inhibitors for Mild Steel in 1 M HCl: Experimental and Theoretical Investigations.

A novel polymeric ionic liquid (PDBA-IL-NH2) using imidazolium ionic liquids with short alkyl chains as monomers and two control ionic liquids (PDBA-IL-OH and PIL-NH2) were synthesized. Their inhibition properties and mechanisms were explored via surface analysis, weight loss tests, electrochemical studies, and adsorption isotherm analysis. The corrosion inhibition efficiency (CIE) of PDBA-IL-NH2 gradually increased with increasing concentration, and the largest efficiency was 94.67% at 100 ppm. At the same concentration (50 ppm), the corrosion inhibition abilities of inhibitors were in the order of PDBA-IL-NH2 > PDBA-IL-OH > PIL-NH2 > IL-NH2. Based on the experimental investigation, the synergistic effect of electrostatic interaction, protonation, and electron donor-acceptor interaction facilitated the intensive entanglement and coverage of PDBA-IL-NH2 with the reticulated form on the metal, and the generated densest films protected the metal from the corrosive media. Ultimately, the theoretical results of molecular dynamics simulations and quantum chemical study were in high agreement with the experimental data, which confirmed the proposed inhibition mechanisms on the microscopic scale. This study contributed valuable perspectives to the design of efficient and ecofriendly corrosion inhibitors.

EGFR marks a subpopulation of dermal mesenchymal cells highly expressing IGF1 which enhances hair follicle regeneration.

The skin harbours transcriptionally and functionally heterogeneous mesenchymal cells that participate in various physiological activities by secreting biochemical cues. In this study, we aimed to identify a new subpopulation of dermal mesenchymal cells that enhance hair follicle regeneration through a paracrine mechanism. Integrated single-cell RNA sequencing (scRNA-seq) data analysis revealed epidermal growth factor receptor (EGFR) as a marker of distinct fibroblast subpopulation in the neonatal murine dermis. Immunofluorescence staining and fluorescence-activated cell sorting (FACS) were used to validate the existence of the cell population in Krt14-rtTA-H2BGFP mouse. The difference of gene expression between separated cell subpopulation was examined by real-time PCR. Potential effect of the designated factor on hair follicle regeneration was observed after the application on excisional wounds in Krt14-rtTA-H2BGFP mouse. Immunofluorescence staining demonstrated the existence of dermal EGFR+ cells in neonatal and adult mouse dermis. The EGFR+ mesenchymal population, sorted by FACS, displayed a higher expression level of Igf1 (insulin-like growth factor 1). Co-localisation of IGF1 with EGFR in the mouse dermis and upregulated numbers of hair follicles in healed wounds following the application of exogenous IGF1 illustrated the contribution of EGFR+ cells in promoting wound-induced hair follicle neogenesis. Our results indicate that EGFR identifies a subpopulation of dermal fibroblasts that contribute to IGF1 promotion of hair follicle neogenesis. It broadens the understanding of heterogeneity and the mesenchymal cell function in skin and may facilitate the potential translational application of these cells.

Effects of Modification Degrees on the Colloidal Stability of Amphiphilic Janus Graphene Oxide in Aqueous Solution with and without Electrolytes.

Colloidal stability of modified graphene oxide (GO) is fundamental for its practical applications. Meanwhile, most of the investigations mainly focused on the nanosheets modified by a certain amount of modifiers and neglected the effects of the modification degree, which could vary the physical and chemical properties of modified GO and significantly affect its stability in solution. To the best of our knowledge, this study initially investigated the impact of modification degrees on the colloidal stability of graphene-based amphiphilic Janus nanosheets (JGO) via both experimental and theoretical approaches. The prepared JGO, asymmetrically grafted by dodecylamine, exhibited a direct relation between the modification degree and nanosheet thickness, refractive index, electrostatic properties, hydrophobicity, and the ultimate colloidal stability. In addition, the ionic strength imposed distinctive influences on the aggregation behavior of JGO. Based on the comparison between experimental results and theoretical calculation, it was revealed that the JGO should be modeled as two-dimensional (2D) nanosheets in pure water and be treated as 3D spherical particles in electrolyte solutions for the prediction with the extended Derjaguin-Landau-Verwey-Overbeek theory.

The effect of Dendrobium officinale extract in inhibiting the senescence of H2O2-induced fibroblasts based on the senescence-associated secretory phenotype.

BACKGROUND: Dendrobium officinale is widely used for a long time in China, with effect of antioxidation, antitumor, enhancing immunity and so on. In recent years, Dendrobium officinale has been gradually used in cosmetics due to its powerful beauty effects. AIMS: Based on senescence-associated secretory phenotype (SASP), we studied the antiaging effect of Dendrobium officinale extract (DOE) on skin. METHODS: The senescent model of human skin fibroblasts was established by the induction of H2O2, and the content of SASP factors was tested after the treatment of DOE, such as interleukin-6 (IL-6), monocyte chemoattractant protein-1 (MCP-1) and matrix metalloproteinase-1 (MMP-1). RESULTS: It was found that after the treatment with different concentrations of DOE, the contents of IL-6, MCP-1 and MMP-1 all decreased in different degrees. CONCLUSIONS: It indicated that DOE could inhibit the secretion of SASP factors and was a promising natural antiaging agent.

Research on the interaction between trench material and pipeline under fault displacement.

With the large-scale construction of oil and gas pipelines, the safety issues of long-distance buried pipelines in the service and construction have become increasingly prominent. The complex geological and topographical conditions of the special zone will put forwards extremely high requirements on pipe trench laying backfill materials and construction technology. For example, pipelines are inevitable to cross the active fault, while the trench backfilled with soil has limitations in protecting them from failure under the active fault displacement caused by the earthquake. Therefore, it is necessary to study the pipe-soil interaction mechanism, determine the stress state of the pipeline and propose a new backfilling material that can protect the pipeline from failure. Foam concrete (FC) provides a new choice to backfill the buried pipeline trench due to its high-homogeneity, lightweight, controllable-strength, and self-compacting. To further determine the applicability of the FC, the pipe-FC interaction mechanism is studied. Then, a FE model of the FC-pipeline-soil interaction system is established by Abaqus to quantitatively analyze the applicability of the FC based on the experimental data of the mechanical performance of the FC. It proves that using FC as trench backfill material has a noticeable protective effect on the pipeline under the earthquake-induced displacement of the normal fault. Furthermore, FC has a better protective effect on the pipeline subjected to compressive than tensile. Therefore, the reference for applying FC in trench backfilling of pipelines crossing normal fault is provided.

SERS imaging investigation of the removal efficiency of pesticide on vegetable leaves by using different surfactants.

Pesticide residues on vegetables could be removed by commercial detergents to guarantee food safety, but the removal efficiencies of different formulations of detergents need to be further investigated. In this work, surface enhanced Raman scattering (SERS) imaging method due to its good space resolution as well as high sensitivity is used to track the thiram residue, and evaluate the pesticide removing efficiencies by mixtures of several surfactants at different ratios. Sodium linear alkylbenzene sulphonate-alkyl glycoside (LAS-APG) with the ratio at 5:5 and the concentration at 0.2 % show the best removing effect. In addition, HPLC method is employed to validate the results of SERS imaging. Furthermore, LAS-APG mixture could be efficiently washed out from the leaves through simple household cleaning, meaning no secondary contamination. It is perspective that SERS imaging is an effective technique to explore the effect of fruit and vegetable detergents in removing pesticide residues.

Metal-organic cages for gas adsorption and separation.

The unique high surface area and tunable cavity size endow metal-organic cages (MOCs) with superior performance and broad application in gas adsorption and separation. Over the past three decades, for instance, numerous MOCs have been widely explored in adsorbing diverse types of gas including energy gases, greenhouse gases, toxic gases, noble gases, etc. To gain a better understanding of the structure-performance relationships, great endeavors have been devoted to ligand design, metal node regulation, active metal site construction, cavity size adjustment, and function-oriented ligand modification, thus opening up routes toward rationally designed MOCs with enhanced capabilities. Focusing on the unveiled structure-performance relationships of MOCs towards target gas molecules, this review consists of two parts, gas adsorption and gas separation, which are discussed separately. Each part discusses the cage assembly process, gas adsorption strategies, host-guest chemistry, and adsorption properties. Finally, we briefly overviewed the challenges and future directions in the rational development of MOC-based sorbents for application in challenging gas adsorption and separation, including the development of high adsorption capacity MOCs oriented by adsorbability and the development of highly selective adsorption MOCs oriented by separation performance.

Impact of manufacturing processes on glycerolipid and polar lipid composition and ultrastructure in infant formula.

The introduction of exogenous lipids in the production of infant formula induces significant alterations in milk lipid composition, content, and membrane structure, thus affecting the lipid digestion, absorption, and utilization. This study meticulously tracks these changes throughout the manufacturing process. Pasteurization has a significant effect on phosphatidylcholine and sphingomyelin in the outer membrane, decreasing their relative contents to total polar lipids from 12.52% and 17.34% to 7.72% and 12.59%, respectively. Subsequent processes, including bactericidal-concentration and spray-drying, demonstrate the thermal stability of sphingomyelin and ceramides, while glycerolipids with arachidonic acid/docosahexaenoic acid and glycerophospholipids, particularly phosphatidylethanolamine, diminish significantly. Polar lipids addition and freeze-drying technology significantly enhance the polar lipid content and improve microscopic morphology of infant formula. These findings reveal the diverse effects of technological processes on glycerolipid and polar lipid compositions, concentration, and ultrastructure in infant formulas, thus offering crucial insights for optimizing lipid content and structure within infant formula.

Effect of Butt Gap on Stress Distribution and Carrying Capacity of X80 Pipeline Girth Weld.

An unstable assembly gap is detrimental to the formation and performance of the pipeline butt girth weld joint. Therefore, a numerical model of an 18.4 mm-thick X80 pipeline girth weld by a homogeneous body heat source was established to investigate the effect of the butt gap on the joint temperature and stress field, and carrying capacity. The accuracy of the simulation results was verified by measuring the welding thermal cycle with a thermocouple. The investigation results showed that the weld pool, heat-affected zone (HAZ) width, and maximum circumferential stress of the joint rose with the increase in the butt gap. The tensile stress unfavorable to the joint quality was mainly distributed in the weld metal and partial HAZ, and the distribution areas gradually expanded as the gap increased. The Von Mises stress peak value of the joint appeared in the order of 3 mm > 2 mm > 1 mm > 0 mm gap, reaching the maximum of 467.3 MPa (3 mm gap). This variation trend is directly related to the improvement in welding heat input with increasing butt gaps. The maximum Von Mises stress of the joint was positively correlated with the carrying capacity of the pipeline, which diminished as the butt gap enlarged. The pipeline carrying capacity reached 17.8 MPa for the joint with no butt gap, and dropped to 13.1 MPa for the joint with a 3 mm gap. The relationship between the carrying capacity (P) and butt gap (C) was described by P = −0.125C2 − 1.135C + 17.715, through which the pipeline carrying capacity with other butt gaps can be predicted.

Small angle neutron scattering study of polyelectrolyte brushes grafted to well-defined gold nanoparticle interfaces.

Small angle neutron scattering (SANS) has been used to study the conformations, and response to added salt, of a polyelectrolyte layer grafted to the interfaces of well-defined gold nanoparticles. The polyelectrolyte layer is prepared at a constant coverage by grafting thiol-functionalized polystyrene (M(w) = 53k) to gold nanoparticles of well-defined interfacial curvature (R(c) = 26.5 nm) followed by a soft-sulfonation of 38% of the segments to sodium polystyrene sulfonate (NaPSS). The SANS profiles can be fit by Fermi-Dirac distributions that are consistent with a Gaussian distribution but are better described by a parabolic distribution plus an exponential tail, particularly in the high salt regime. These distributions are consistent with the predictions and measurements for osmotic and salted brushes at interfaces of low curvature. When the concentration of added salt exceeds the concentration of counterions inside the brush, there is a salt-induced deswelling, but even at the highest salt concentration the brush remains significantly swollen due to a short-ranged excluded volume interaction. This is responsible for the observed resistance to aggregation of these comparatively high concentration polyelectrolyte stabilized gold nanoparticle dispersions even in the presence of a high concentration of added salt.