High efficiency removal of NO using waste calcium carbide slag by facile KOH modification.

Waste calcium carbide slags (CS), which are widely applied to desulfurisation, are not typically used in denitration. Herein, to well achieve waste control by waste, a facile and high-efficiency denitration strategy is developed using KOH to modify the calcium carbide slags (KCS). Various KCS samples were investigated using a series of physical and chemical characterisations. The performance test results showed that the KOH concentration and reaction temperature are the main factors affecting the denitration efficiency of KCS, and CS modified with 1.5 mol/L KOH (KCS-1.5) can achieve 100% denitration efficiency at 300°C. Such excellent removal efficiency is due to the catalytic oxidation of the oxygen-containing functional groups derived from the KCS. Further studies showed that KOH treatment significantly increased the concentration of oxygen vacancies, nitro compounds, and basic sites of CS. This study provides a novel strategy for the resource utilisation of waste CS in the future.

Catalytic Decomposition Mechanism of PH3 on 3DCuO/C and High Value Utilization of Deactivated Catalysts.

With the widespread application of lithium iron phosphate batteries, the production capacity of the yellow phosphorus industry has increased sharply, and the treatment of the highly toxic by-product PH3 is facing severe challenges. In this study, a 3D copper-based catalyst (3DCuO/C) that can efficiently decompose PH3 at low temperatures and low oxygen concentrations is synthesized. The PH3 capacity is up to 181.41 mg g-1 , which is superior to that previously reported in the literature. Further studies indicated that the special 3D structure of 3DCuO/C induces oxygen vacancies on the surface of CuO, which is beneficial to the activation of O2 , and then promotes the adsorption and dissociation of PH3 . The doping of P after dissociation determines the formation of Cu-P, and the eventual conversion to Cu3 P leads to the deactivation of CuO active sites. More strikingly, due to the appearance of Cu3 P, the deactivated De-3DCuO/C (Cu3 P/C) exhibited significant activity in the photocatalytic degradation of rhodamine B and photocatalytic oxidation of Hg0 (gas) and can also be a candidate as an anode material for Li batteries after modification, which will provide a more thorough and economical treatment scheme for deactivated catalysts.

Two Birds with One Stone: Copper-Based Adsorbents Used for Photocatalytic Oxidation of Hg0 (Gas) after Removal of PH3.

CuX/TiO2 adsorbents with CuO as the active component were prepared via a simple impregnation method for efficient purification of phosphine (PH3) under the conditions of low temperatures (90 °C) and low oxygen concentration (1%). The PH3 breakthrough capacity of optimal adsorbent (Cu30/TiO2) is 136.2 mg(PH3)·gsorbent-1, and the excellent dephosphorization performance is mainly attributed to its abundant sur face-active oxygen and alkaline sites, large specific surface area, and strong interaction between CuO and the support TiO2. Surprisingly, CuO is converted to Cu3P after the dephosphorization by CuX/TiO2. Since Cu3P is a P-type semiconductor with high added value, the deactivated adsorbent (Cu3P/TiO2) is an efficient heterostructure photocatalyst for photocatalytic removal of Hg0 (gas) with the Hg0 removal performance of 92.64% under visible light. This study provides a feasible strategy for the efficient removal and resource conversion of PH3 under low-temperature conditions and the alleviation of the environmental risk of secondary pollution.

A 12-Year Retrospective Analysis of Blood Culture Isolates in the Intensive Care Unit of a Tertiary Hospital in China.

BACKGROUND: This paper is to explore the composition and antibiotic resistance of pathogens isolated from blood cultures of patients with bloodstream infection (BSI) in the intensive care unit (ICU). METHODS: A retrospective study has been performed to identify the pathogens isolated from blood cultures of 147 patients with BSI in the ICU of our Hospital over 12 years (January 2008 to December 2019). The antibiotic resistance and susceptibility of the isolates were tested. RESULTS: Among the 152 pathogens isolated from positive blood cultures, 61.84% were Gram-positive bacteria, 34.87% were Gram-negative bacteria, and 3.29% were fungi. The most frequently isolated pathogens were coagulase-negative Staphylococci, Staphylococcus aureus, and Escherichia coli. The pathogen distributions remained stable over 12 years. Gram-positive cocci were highly susceptible to vancomycin, linezolid, and teicoplanin. Extended-spectrum ß-lactamase-producing pathogens were highly susceptible to amikacin, imipenem, meropenem, and polymyxin B. Acinetobacter were relatively sensitive to amikacin, trimethoprim-sulfamethoxazole, and polymyxin, whereas Pseudomonas aeruginosa were sensitive to amikacin, gentamicin, levofloxacin, imipenem, meropenem, and ciprofloxacin, with resistance rates less than 30%. CONCLUSIONS: Gram-positive bacteria were the dominant pathogens isolated from blood cultures of ICU-BSI patients and were susceptible to vancomycin, linezolid, and teicoplanin. The antibiotic susceptibility of Gram-negative bacteria varies greatly. Our results provide important information to guide the treatment decisions in the management of ICU-BSIs.

[Clinical and genetic analysis of five children with Catecholaminergic polymorphic ventricular tachycardia due to variants of RYR2 gene].

OBJECTIVE: To explore the clinical and genetic characteristics of five children with Catecholaminergic polymorphic ventricular tachycardia (CPVT). METHODS: Five children with clinical manifestations consistent with CPVT admitted to the Department of Cardiology of Children's Hospital Affiliated to Zhengzhou University from November 2019 to November 2021 were selected as the study subjects. Their clinical data were collected. Potential variants were detected by whole exome sequencing, and Sanger sequencing was used to verify the candidate variants. All patients were treated with ß-blocker propranolol and followed up. RESULTS: All patients had developed the disease during exercise and presented with syncope as the initial clinical manifestation. Electrocardiogram showed sinus bradycardia. The first onset age of the 5 patients were (10.4 ± 2.19) years, and the time of delayed diagnosis was (1.6 ± 2.19) years. All of the children were found to harbor de novo heterozygous missense variants of the RYR2 gene, including c.6916G>A (p.V2306I), c.527G>C (p.R176P), c.12271G>A (p.A4091T), c.506G>T (p.R169L) and c.6817G>A (p.G2273R). Among these, c.527G>C (p.R176P) and c.6817G>A (p.G2273R) were unreported previously. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG), the c.527G>C (p.R176P) was classified as a pathogenic variant (PS2+PM1+PM2_Supporting+PM5+PP3+PP4), and the c.6817G>A (p.G2273R) was classified as a likely pathogenic variant (PS2+PM2_Supporting+PP3+PP4). The symptoms of all children were significantly improved with the propranolol treatment, and none has developed syncope during the follow up. CONCLUSION: Discovery of the c.527G>C (p.R176P) and c.6817G>A (p.G2273R) variants has expanded the mutational spectrum of the RYR2 gene. Genetic testing of CPVT patients can clarify the cause of the disease and provide a reference for their genetic counseling.

[Genetic analysis of a child with restricted cardiomyopathy and phenylketonuria and a literature review].

OBJECTIVE: To analyze the clinical and genetic characteristics of a child with restricted cardiomyopathy (RCM) and phenylketonuria (PKU), and summarize the clinical characteristics and genetic diversity of RCM in children through a literature review. METHODS: A child with RCM in conjunct with PKU who was admitted to the Children's Hospital Affiliated to Zhengzhou University in June 2020 due to edema of eyelids and lower limbs for 1 year and aggravation for over 1 month was selected as the study subject. Relevant clinical data were collected. Peripheral blood samples of the child and his parents were collected for whole exome sequencing (WES). Candidate variants were validated by Sanger sequencing and bioinformatic analysis. Childhood, TNNI3 gene and restricted cardiomyopathy were used as the keywords to search the Wanfang data knowledge service platform, Chinese Journal Full-text database and PubMed database, and the search period was limited to from the time of establishment till August 2022. Clinical manifestations and characteristics of the TNNI3 gene variants were summarized. RESULTS: The child, a 2-year-old-and-4-month-old male, had normal intelligence, facial features and normal hair and skin color, but his motor and physical development was delayed, in addition with edema of bilateral eyelids and lower limbs. The results of WES and Sanger sequencing revealed that he has harbored compound heterozygous variants of the PAH gene, namely c.331C>T (p.R111X) and c.940C>A (p.P341T), which were inherited from his father and mother, respectively. In addition, he has also harbored a de novo heterozygous variant of c.508C>T (p.R170W) of the TNNI3 gene. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG), the TNNI3: c.508C>T (p.R170W) was classified as a pathogenic variant (PS2+PS4+PM2_Supporting+PM5), PAH: c.331C>T (p.R111X) as a pathogenic variant (PVS1+PM2_Supporting+PM3+PP4), and c.940C>A (p.P341T) as a likely pathogenic variant (PM2_Supporting+PM3+PM5+PP4). In total 30 children with RCM caused by TNNI3 gene variants were retrieved, with a male-to-female ratio of 1 : 1.55 and manifestations including heart failure, sinus rhythm, bi-atrial enlargement, ST-T wave change, ventricular restricted filling, and decreased ventricular diastolic function. In total 16 variants of the TNNI3 gene were identified, among which c.575G>A was the most common, and all cases had conformed to an autosomal dominant inheritance. CONCLUSION: Phenylalanine hydroxylase deficiency and RCM are rare diseases with complex clinical manifestations. The PAH: c.331C>T (p.R111X)/c.940C>A (p.P341T) and TNNI3: c.508C>T (p.R170W) variants probably underlay the RCM and PKU in this child.

[A case of dilated cardiomyopathy caused by FHL2 gene variant and a literature review].

OBJECTIVE: To explore the clinical phenotype and genetic features of a child with dilated cardiomyopathy (DCM). METHODS: Clinical data of the child who had presented at the Zhengzhou Children's Hospital on April 28, 2020 was collected. Trio-whole exome sequencing (trio-WES) was carried out for the child and her parents, and candidate variants were validated by Sanger sequencing. "FHL2" was taken as the key word to retrieve related literature from January 1, 1997 to October 31, 2021 in the PubMed database and was also searched in the ClinVar database as a supplement to analyze the correlation between genetic variants and clinical features. RESULTS: The patient was a 5-month-old female infant presented with left ventricular enlargement and reduced systolic function. A heterozygous missense variant c.391C>T (p.Arg131Cys) in FHL2 gene was identified through trio-WES. The same variant was not detected in either of her parents. A total of 10 patients with FHL2 gene variants have been reported in the literature, 6 of them had presented with DCM, 2 with hypertrophic cardiomyopathy (HCM), and 2 with sudden unexplained death (SUD). Phenotypic analysis revealed that patients with variants in the LIM 3 domain presented hypertrophic cardiomyopathy and those with variants of the LIM 0~2 and LIM 4 domains had mainly presented DCM. The c.391C>T (p.Arg131Cys) has been identified in a child with DCM, though it has not been validated among the patient's family members. Based on the guidelines of the American College of Medical Genetics and Genomics, the c.391C>T(p.Arg131Cys) variant was re-classified as likely pathogenic (PS2+PM2_Supporting+PP3+PP5). CONCLUSION: The heterozygous missense variant of c.391C>T (p.Arg131Cys) in the FHL2 gene probably predisposed to the DCM in this child, which has highlighted the importance of WES in the clinical diagnosis and genetic counseling.

Novel synthesis of reed flower-like SmMnOx catalyst with enhanced low-temperature activity and SO2 resistance for NH3-SCR.

In this work, a novel co-precipitation coupled solvothermal procedure is proposed to prepare a SmMnOx catalyst (SmMnOx-CP + ST) with a reed flower-like structure for the selective catalytic reduction of NOx by NH3 (NH3-SCR). Over 90% NOx conversion and N2 selectivity was achieved at a low temperature range (25-200 °C), and 96% NOx conversion was achieved in the presence of 100 ppm SO2 at 75 °C. While the NH3-SCR of the SmMnOx catalysts prepared by co-precipitation (SmMnOx-CP) and solvothermal (SmMnOx-ST) methods performed much poorer than the SmMnOx-CP + ST catalyst. All catalysts were characterized by XRD, BET, SEM, XPS, H2-TPR, NH3-TPD, NOx-TPD, and FT-IR. The results revealed that the superior performance of the SmMnOx-CP + ST is due to the unique reed flower-like structure morphology, which endows the SmMnOx-CP + ST with the largest surface area, the strongest synergistic reaction of Sm and Mn, abundant surface oxygen species and surface active sites, and significantly enhances the redox ability. Furthermore, the amorphous reed flower-like structure showed strong short-range ordered interaction between the active components and weaken the formation of sulfates species. In addition, the highest content of Mn4+ and Mn3++Mn4+ greatly promotes the redox cycles of Sm2+↔Mn4+ and Sm2+↔Mn3+, and suppresses the production of sulfate species in the presence of SO2.

Spatial and temporal distribution of aerobic anoxygenic phototrophic bacteria: key functional groups in biological soil crusts.

Several significant ecosystem services are performed by biological soil crusts (BSCs) in drylands, wherein photoautotrophic microorganisms are commonly critical contributors. However, aerobic anoxygenic phototrophic bacteria (AAnPB) are rarely reported in BSCs, despite being the second major branch of Earth's phototrophic microbes. Here, we collected different types of BSCs and their subsoils from temperate deserts, investigated distributions of AAnPB communities among BSCs using cultivation and high-throughput sequencing approaches, predicted keystone species by co-occurrence network analysis, and verified their effects on BSCs formation through microcosm experiments. The absolute abundances and diversity of AAnPB were higher in BSCs and were closely related with BSCs successional stages, as well as soil organic carbon contents. AAnPB communities in both BSCs and their subsoils were dominated by Proteobacteria and Alphaproteobacteria, specifically Acetobacteraceae, Rhodospirillaceae, Roseiflexaceae, Sphingomonadaceae and Caulobacteraceae families. Mean annual precipitation, pH and available nutrients were the primary factors that shaped AAnPB community structures. The predicted keystone species belonged to the families Acetobacteraceae, Rhodospirillaceae and Sphingomonadanceae. Microcosm experiments demonstrated that inoculation with strains from the three families greatly accelerated the formation and development of BSCs. These observations suggest that AAnPB are likely important functional groups in BSCs that significantly contribute to their formation and important ecosystem services.

[Identification of variants in TNNI3 gene in two children with restrictive cardiomyopathy].

OBJECTIVE: To identify the pathogenesis in two patients of restrictive cardiomyopathy (RCM) using high-throughput sequencing. METHODS: Peripheral blood samples from the two patients and their parents were collected and genomic DNAs were extracted to conduct targeted next generation sequencing or whole exome sequencing. Bioinformation analysis was performed to identify the pathogenic variants in genes associated with cardiomyopathy, which were further validated by Sanger sequencing. RESULTS: By high throughput sequencing, we detected a de novo heterozygous variant c.549+1G>T in TNNI3 gene in patient 1. The variant has not been reported previously and was predicted to be pathogenic in line with American College of Medical Genetics and Genomics (ACMG) guidelines (PVS1+PS2+PM2). Another heterozygous variant c.433C>T (p.Arg145Trp) in TNNI3 gene was identified in patient 2 and his father. The variant had been reported as pathogenic variant in Clinvar and HGMD databases; based on ACMG guidelines, the variant was predicted to be likely pathogenic (PS3+PM1+PP3). CONCLUSION: TNNI3 variants may be the causative gene responsible for restrictive cardiomyopathy in the two patients. High throughput sequencing results provide bases for the diagnosis of restrictive cardiomyopathy.

Atmospheric bulk deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the vicinity of MSWI in Shanghai, China.

Atmospheric bulk deposition samples were gathered month by month throughout a year at two sites in vicinity of a MSWI in Shanghai, to carry out an investigation on the atmospheric bulk deposition fluxes and seasonal variations of polychlorinated dibenzo-p-dioxinsand dibenzofurans (PCDD/Fs). The atmospheric bulk deposition fluxes of PCDD/Fs ranged from 23.5 to 560 pg m-2·d-1 (1.01-23.9 pg WHO-TEQ·m-2·d-1), with an average value of 136 pg m-2·d-1 (5.08 pg WHO-TEQ·m-2·d-1) in the Vicinity of the MSWI in Shanghai. The measured concentrations were well compared with those from urban or industrial sites in other regions in China and abroad. The seasonal trend of atmospheric bulk deposition fluxes of PCDD/Fs throughout a year exhibited as high levels in summer, moderate levels in winter, and low levels in spring and autumn. The principal component analysis (PCA) indicated not only the MSWI, but also vehicle emission was the indispensable source of PCDD/Fs in the vicinity of the MSWI, especially for the urban areas. The positive matrix factorization (PMF) apportioned 5 source categories: MSWI, diesel vehicles, atmosphere background, industrial combustion and un-leaded gas vehicles, accounting for 43.3%, 38.1%, 6.89%, 6.19% and 5.50% in average, respectively of PCDD/Fs in atmospheric bulk deposition in the vicinity of the MSWI in Shanghai, China.

The Influence of the Charge Compensating Anions of Layered Double Hydroxides (LDHs) in LDH-NS/Graphene Oxide Nanohybrid for CO2 Capture.

In this paper, the influence of charge compensating anions of Layered double hydroxides (LDHs) in the LDH-NS/GO nanohybrid for carbon dioxide capture was systematically investigated. The four kinds of different charge compensating anion intercalated LDH were exfoliated and the LDH and Graphene oxide (GO) nanohybrids were synthesized by "exfoliation-self-assembly" method. In this contribution, the CO2 capture capacity of LDH was improved by introducing of GO. And the calcination and adsorption conditions were tested, which proved that the LDH-NS/GO nanohybrids can be used in a wide temperature range for carbon dioxide capture, and the appropriate calcination temperature is 400 °C. Furthermore, the LDH-NS/GO nanohybrids also have a good multiple adsorption/desorption stability, which is vital for practical application.

MicroRNA-101-2-5p targets the ApoB gene in the liver of chicken (Gallus Gallus).

Apolipoprotein B (ApoB) is a major protein component of plasma lipoproteins. It is involved in many important biological processes such as lipid transportation, enzyme activity regulation, and receptor recognition. Extensive studies have shown that the expression of ApoB is regulated at multiple levels. However, the regulation of ApoB expression by microRNAs (miRNAs) still remains unknown. In the present study, identified are miRNAs that are predicted to interact with ApoB in chicken. The predicted relationship between the identified miRNAs and ApoB was verified through dual luciferase reporter assay in chicken DF1 cells, and the effect of miRNAs on ApoB expression was analyzed in chicken embryo hepatocytes stimulated by 17ß-estradiol. The results show that miR-101-2-5p was predicted to interact with ApoB. Dual luciferase reporter assay together with the miR-101-2-5p mimics study demostrate that ApoB is the target of miR-101-2-5p, which suppresses the expression of ApoB through binding with the 3'UTR of ApoB. Our experiments suggest that miR-101-2-5p might be involved in lipid metabolism through binding to the 3'UTR of ApoB in the liver of egg-laying chickens.

Prediction of Adsorption Equilibrium of VOCs onto Hyper-Cross-Linked Polymeric Resin at Environmentally Relevant Temperatures and Concentrations Using Inverse Gas Chromatography.

Hyper-cross-linked polymeric resin (HPR) represents a class of predominantly microporous adsorbents and has good adsorption performance toward VOCs. However, adsorption equilibrium of VOCs onto HPR are limited. In this research, a novel method for predicting adsorption capacities of VOCs on HPR at environmentally relevant temperatures and concentrations using inverse gas chromatography data was proposed. Adsorption equilibrium of six VOCs (n-pentane, n-hexane, dichloromethane, acetone, benzene, 1, 2-dichloroethane) onto HPR in the temperature range of 403-443 K were measured by inverse gas chromatography (IGC). Adsorption capacities at environmentally relevant temperatures (293-328 K) and concentrations (P/Ps = 0.1-0.7) were predicted using Dubinin-Radushkevich (DR) equation based on Polany's theory. Taking consideration of the swelling properties of HPR, the volume swelling ratio (r) was introduced and r·Vmicro was used instead of Vmicro determined by N2 adsorption data at 77 K as the parameter q0 (limiting micropore volume) of the DR equation. The results showed that the adsorption capacities of VOCs at environmentally relevant temperatures and concentrations can be predicted effectively using IGC data, the root-mean-square errors between the predicted and experimental data was below 9.63%. The results are meaningful because they allow accurate prediction of adsorption capacities of adsorbents more quickly and conveniently using IGC data.

Identification and SNP association analysis of a novel gene in chicken.

A novel gene that was predicted to encode a long noncoding RNA (lncRNA) transcript was identified in a previous study that aimed to detect candidate genes related to growth rate differences between Chinese local breed Gushi chickens and Anka broilers. To characterise the biological function of the lncRNA, we cloned and sequenced the complete open reading frame of the gene. We performed quantitative real-time polymerase chain reaction (qPCR) to analyse the expression patterns of the lncRNA in different tissues of chicken at different development stages. The qPCR data showed that the novel lncRNA gene was expressed extensively, with the highest abundance in spleen and lung and the lowest abundance in pectoralis and leg muscle. Additionally, we identified a single nucleotide polymorphism (SNP) at the 5'-end of the gene and studied the association between the SNP and chicken growth traits using data from an F2 resource population of Gushi chickens and Anka broilers. The association analysis showed that the SNP was significantly (P < 0.05) associated with leg muscle weight, chest breadth, sternal length and body weight in chickens at 1 day, 4 weeks and 6 weeks of age. We concluded that the novel lncRNA gene, which we designated pouBW1, may play an important role in regulating chicken growth.

Relationship between reaction rate constants of organic pollutants and their molecular descriptors during Fenton oxidation and in situ formed ferric-oxyhydroxides.

Fenton oxidation is a promising water treatment method to degrade organic pollutants. In this study, 30 different organic compounds were selected and their reaction rate constants (k) were determined for the Fenton oxidation process. Gaussian09 and Material Studio software sets were used to carry out calculations and obtain values of 10 different molecular descriptors for each studied compound. Ferric-oxyhydroxide coagulation experiments were conducted to determine the coagulation percentage. Based upon the adsorption capacity, all of the investigated organic compounds were divided into two groups (Group A and Group B). The percentage adsorption of organic compounds in Group A was less than 15% (wt./wt.) and that in the Group B was higher than 15% (wt./wt.). For Group A, removal of the compounds by oxidation was the dominant process while for Group B, removal by both oxidation and coagulation (as a synergistic process) took place. Results showed that the relationship between the rate constants (k values) and the molecular descriptors of Group A was more pronounced than for Group B compounds. For the oxidation-dominated process, EHOMO and Fukui indices (f(0)x, f(-)x, f(+)x) were the most significant factors. The influence of bond order was more significant for the synergistic process of oxidation and coagulation than for the oxidation-dominated process. The influences of all other molecular descriptors on the synergistic process were weaker than on the oxidation-dominated process.

Catalytic hydrolysis of monochlorodifluoromethane over ZnO/ZrO2 catalysts at low temperatures.

Monochlorodifluoromethane (HCFC-22) has been identified as a significant contributor to the depletion of the Earth's ozone layer, garnering considerable attention within the scientific community. Consequently, the investigation of Freon degradation has become a central focus of current research efforts. In this study, we opted to employ catalytic hydrolysis as it offers numerous advantages for the degradation of HCFC-22. Specifically, we prepared ZnO/ZrO2 catalysts with hexahedral rod-like structures through citric acid complexation. We examined the impact of various preparation conditions (such as the molar ratio of ZnO to ZrO2, calcination temperature, and calcination time) as well as catalytic hydrolysis conditions (including the amount of catalyst, total flow rate, and catalytic hydrolysis temperature) on the hydrolysis rate of HCFC-22. Characterization of the catalysts was performed using techniques such as XRD, SEM, EDS, TG-DTG, FTIR, N2 adsorption-desorption, CO2-TPD, and NH3-TPD. Our experimental findings revealed the optimal preparation conditions: a catalytic hydrolysis temperature of 100 °C, a molar ratio of ZnO to ZrO2 of 0.7, a water bath temperature of 90 °C, a roasting temperature of 400 °C, and a roasting time of 4 h. At a catalytic hydrolysis temperature of 100 °C, the hydrolysis rate of HCFC-22 reached 99.81%, with the main hydrolyzed products being HCl, HF, and CO2.

Plant and soil responses to tillage practices change arbuscular mycorrhizal fungi populations during crop growth.

Background: Tillage practices can substantially affect soil properties depending on crop stage. The interaction between tillage and crop growth on arbuscular mycorrhizal fungi (AMF) communities remains unclear. We investigated the interactions between four tillage treatments (CT: conventional tillage, RT: reduced tillage, NT: no tillage with mulch, and SS: subsoiling with mulch), maintained for 25 years, and two wheat growth stages (elongation stage and grain filling stage) on AMF diversity and community composition. Results: The AMF community composition strongly changed during wheat growth, mainly because of changes in the relative abundance of dominant genera Claroideoglomus, Funneliformi, Rhizophagu, Entrophospora, and Glomus. Co-occurrence network analysis revealed that the grain filling stage had a more complex network than the elongation stage. Redundancy analysis results showed that keystone genera respond mainly to changes in soil organic carbon during elongation stage, whereas the total nitrogen content affected the keystone genera during grain filling. Compared with CT, the treatments with mulch, i.e., NT and SS, significantly changed the AMF community composition. The change of AMF communities under different tillage practices depended on wheat biomass and soil nutrients. NT significantly increased the relative abundances of Glomus and Septoglomus, while RT significantly increased the relative abundance of Claroideoglomus. Conclusion: Our findings indicate that the relative abundance of dominant genera changed during wheat growth stages. Proper tillage practices (e.g., NT and SS) benefit the long-term sustainable development of the Loess Plateau cropping systems.

Formaldehyde Oxidation of Ce0.8Zr0.2O2 Nanocatalysts for Room Temperature: Kinetics and Effect of pH Value.

Ce0.8Zr0.2O2 catalysts were prepared via the co-precipitation method under different pH conditions. The catalysts were characterized via TEM, XRD, XPS, BET, Raman, and FTIR. The oxidation performance of formaldehyde was tested. Precipitation pH affects the physicochemical properties and performance of the Ce0.8Zr0.2O2 catalyst. By controlling the precipitation pH at 10.5, the Ce0.8Zr0.2O2 catalyst with the largest specific surface area, the smallest grain size with the best formaldehyde removal rate (98.85%), abundant oxygen vacancies, and the best oxidation performance were obtained. Meanwhile, the kinetic parameters of the catalyst were experimentally investigated and the calculated activation energy was 12.6 kJ/mol and the number of reaction steps was 1.4 and 1.2.

Resource utilization of hazardous solid waste blast furnace dust: Efficient wet desulfurization and metal recovery.

Hazardous solid waste blast furnace dust (BFD) is rich in valuable metal components such as iron (Fe), zinc (Zn), manganese (Mn), and its recycling or harmless treatment is a major challenge. This paper creatively proposes the strategy of "treating waste with waste" by using BFD for desulfurization. The experimental results show that BFD slurry can achieve high-efficiency desulfurization and recovery of Zn resources. The characterization results indicate that ZnO and Fe2O3 in BFD slurry are the main active components of desulfurization, and the consumption of active components is the main reason for the decline of BFD slurry activity. Further semi-continuous experimental research shows that Zn, Fe, and Mn ions in BFD slurry play a crucial role in the catalytic oxidation of sulfur dioxide (SO2). Additionally, the effects of reaction temperature, stirring speed, inlet SO2 concentration, and inlet gas flow rate on the leaching rate of Zn and Fe were investigated. Under optimal conditions (SO2 concentration = 3000 mg‧m-3, reaction temperature = 40 °C, inlet gas flow rate = 300 mL‧min-1, solid-liquid ratio = 0.5 g/300 mL, stirring speed = 600 rpm), the desulfurization rate reaches 100%, and the maximum leaching rate of Zn can reach 44.6%. Based on the experimental and characterization results, the possible mechanism of BFD slurry desulfurization was proposed. This study provides a reference for the application of BFD in the field of wet desulfurization.