Interactions between nonfullerene acceptors lead to unstable ternary organic photovoltaic cells.

For organic photovoltaic (OPV) devices to achieve consistent performance and long operational lifetimes, organic semiconductors must be processed with precise control over their purity, composition, and structure. This is particularly important for high volume solar cell manufacturing where control of materials quality has a direct impact on yield and cost. Ternary-blend OPVs containing two acceptor-donor-acceptor (A-D-A)-type nonfullerene acceptors (NFAs) and a donor have proven to be an effective strategy to improve solar spectral coverage and reduce energy losses beyond that of binary-blend OPVs. Here, we show that the purity of such a ternary is compromised during blending to form a homogeneously mixed bulk heterojunction thin film. We find that the impurities originate from end-capping C=C/C=C exchange reactions of A-D-A-type NFAs, and that their presence influences both device reproducibility and long-term reliability. The end-capping exchange results in generation of up to four impurity constituents with strong dipolar character that interfere with the photoinduced charge transfer process, leading to reduced charge generation efficiency, morphological instabilities, and an increased vulnerability to photodegradation. As a consequence, the OPV efficiency falls to less than 65% of its initial value within 265 h when exposed to up to 10 suns intensity illumination. We propose potential molecular design strategies critical to enhancing the reproducibility as well as reliability of ternary OPVs by avoiding end-capping reactions.

Spirobifluorene Trimers: High Triplet Pure Hydrocarbon Hosts for Highly Efficient Blue Phosphorescent Organic Light-Emitting Diodes.

Pure aromatic hydrocarbon materials (PHCs) represent a new generation of host materials for phosphorescent OLEDs (PhOLEDs), free of heteroatoms. They reduce the molecular complexity, can be easily synthesized and are an important direction towards robust devices. As heteroatoms can be involved in bonds dissociations in operating OLEDs through exciton induced degradation processes, developing novel PHCs appear particularly relevant for the future of this technology. In the present work, we report a series of extended PHCs constructed by the assembly of three spirobifluorene fragments. The resulting positional isomers present a high triplet energy level, a wide HOMO/LUMO difference and improved thermal and morphological properties compared to previously reported PHCs. These characteristics are beneficial for the next generation of host materials for PhOLEDs and provide relevant design guidelines. When used as a host in blue-emitting PhOLEDs, which are still the weakest link of the field, a very high EQE of 24 % and low threshold voltage of 3.56 V were obtained with a low-efficiency roll-off. This high performance strengthens the position of PHC strategy as an efficient alternative for OLED technology and opens the way to a more simple electronic.

Linearly Arranged Multi-π-Stacked Structure for Efficient Through-Space Charge-Transfer Emitters.

Noncovalent spatial interaction has become an intriguing and important tool for constructing optoelectronic molecules. In this study, we linearly attached three conjugated units in a multi π-stacked manner by using just one trident bridge based on indeno[2,1-b]fluorene. To achieve this structure, we improved the synthetic approach through double C-H activation, significantly simplifying the preparation process. Due to the proximity of the C10, C11, and C12 sites in indeno[2,1-b]fluorene, we derived two novel donor|acceptor|donor (D|A|D) type molecules, 2DMB and 2DMFB, which exhibited closely packed intramolecular stacking, enabling efficient through-space charge transfer. This molecular construction is particularly suitable for developing high-performance thermally activated delayed fluorescence materials. With donor(s) and acceptor(s) constrained and separated within this spatially rigid structure, elevated radiative transition rates, and high photoluminescence quantum yields were achieved. Organic light-emitting diodes incorporating 2DMB and 2DMFB demonstrated superior efficiency, achieving maximum external quantum efficiencies of 28.6% and 16.2%, respectively.

Carbonyl-Containing Thermally Activated Delayed Fluorescence Emitters for Narrow-Band Electroluminescence.

Carbonyl-containing derivatives show enduring vitality in the field of thermally activated delayed fluorescence (TADF) materials; they can realize high device efficiency by using both singlet and triplet excitons for electroluminescence. Recently, a system based on fused ketone/amine exhibited huge potential for constructing multi-resonance TADF (MR-TADF) emitters, which exhibit higher narrow-band emission than conventional TADF emitters with twisted donor-acceptor (D-A) structure. Herein, we summarize current research progress in both traditional and MR-type ketone derivatives with TADF characteristics for introducing the molecular design strategy of maintaining high device efficiency while keeping narrow-band emission profile. We hope this review can inspire the emergence of more high-performance narrow-band materials.

Introducing Spiro-locks into the Nitrogen/Carbonyl System towards Efficient Narrowband Deep-blue Multi-resonance TADF Emitters.

The current availability of multi-resonance thermally activated delayed fluorescence (MR-TADF) materials with excellent color purity and high device efficiency in the deep-blue region is appealing. To address this issue in the emerged nitrogen/carbonyl MR-TADF system, we propose a spiro-lock strategy. By incorporating spiro functionalization into a concise molecular skeleton, a series of emitters (SFQ, SOQ, SSQ, and SSeQ) can enhance molecular rigidity, blue-shift the emission peak, narrow the emission band, increase the photoluminescence quantum yield by over 92 %, and suppress intermolecular interactions in the film state. The referent CZQ without spiro structure has a more planar skeleton, and its bluer emission in the solution state redshifts over 40 nm with serious spectrum broadening and a low PLQY in the film state. As a result, SSQ achieves an external quantum efficiency of 25.5 % with a peak at 456 nm and a small full width at half maximum of 31 nm in a simple unsensitized device, significantly outperforming CZQ. This work discloses the importance of spiro-junction in modulating deep-blue MR-TADF emitters.

Highly Efficient Blue Thermally Activated Delayed Fluorescence Emitters Based on Multi-Donor Modified Oxygen-Bridged Boron Acceptor.

The employment of thermally activated delayed fluorescence (TADF) emitters is one of the most promising ways to realize the external quantum efficiency (EQE) of over 25% for organic light-emitting diodes (OLEDs). In addition, the TADF emitter based on oxygen-bridged boron (BO) fragment can maintain blue emission with high color purity. Herein, we constructed two blue TADF emitters, 3TBO and 5TBO, for OLEDs application. Both emitters consist of three donors linked at the oxygen-bridged boron acceptor. OLED devices based on 3TBO and 5TBO exhibited both high excellent device efficiency and high color purity with a maximum EQE; full-width at half-maximum (FWHM); and CIE coordinates of 17.3%, 47 nm, (0.120, 0.294), and 26.2%, 57 nm, (0.125, 0.275), respectively.

Highly Efficient Sky-Blue π-Stacked Thermally Activated Delayed Fluorescence Emitter with Multi-Stimulus Response Properties.

Organic materials with multi-stimulus response (MSR) properties have demonstrated many potential and practical applications. Herein, a π-stacked thermally activated delayed fluorescence (TADF) material with multi-stimulus response (MSR) properties, named SDMAC, was designed and synthesized using distorted 9,9-dimethyl-10-phenyl-9,10-dihydroacridine as a donor. SDMAC possesses a rigid π-stacked configuration with intramolecular through-space interactions and exhibits aggregation-induced emission enhancement (AIEE), solvatochromic, piezochromic, and circularly polarized luminescence (CPL) under different external stimuli. The rigid molecular structure and efficient TADF properties of SDMAC can be used in displays and lighting. Using SDMAC as an emitter, the maximum external quantum efficiency (EQE) of the fabricated organic light-emitting diodes (OLEDs) is as high as 28.4 %, which make them the most efficient CP-TADF OLEDs based on the through-space charge transfer strategy. The CP organic light-emitting diodes (CP-OLEDs) exhibit circularly polarized electroluminescence (CPEL) signals.

Pure Hydrocarbon Materials as Highly Efficient Host for White Phosphorescent Organic Light-Emitting Diodes: A New Molecular Design Approach.

To date, all efficient host materials reported for phosphorescent OLEDs (PhOLEDs) are constructed with heteroatoms, which have a crucial role in the device performance. However, it has been shown in recent years that the heteroatoms not only increase the design complexity but can also be involved in the instability of the PhOLED, which is nowadays the most important obstacle to overcome. Herein, we design pure aromatic hydrocarbon materials (PHC) as very efficient hosts in high-performance white and blue PhOLEDs. With EQE of 27.7 %, the PHC-based white PhOLEDs display similar efficiency as the best reported with heteroatom-based hosts. Incorporated as a host in a blue PhOLED, which are still the weakest links of the technology, a very high EQE of 25.6 % is reached, surpassing, for the first time, the barrier of 25 % for a PHC and FIrpic blue emitter. This performance shows that the PHC strategy represents an effective alternative for the future development of the OLED industry.

Steric Modulation of Spiro Structure for Highly Efficient Multiple Resonance Emitters.

A multiple resonance thermally activated delayed fluorescence (MR-TADF) molecule with a fused, planar architecture tends to aggregate at high doping ratios, resulting in broad full width at half maximum (FWHM), redshifting electroluminescence peaks, and low device efficiency. Herein, we propose a mono-substituted design strategy by introducing spiro-9,9'-bifluorene (SBF) units with different substituted sites into the MR-TADF system for the first time. As a classic steric group, SBF can hinder interchromophore interactions, leading to high device efficiency (32.2-35.9 %) and narrow-band emission (≈27 nm). Particularly, the shield-like molecule, SF1BN, seldom exhibits a broadened FWHM as the doping ratio rises, which differs from the C3-substituted isomer and unhindered parent emitter. These results manifest an effective method for constructing highly efficient MR-TADF emitters through a spiro strategy and elucidate the feasibility for steric modulation of the spiro structure in π-framework.

Highly efficient luminescence from space-confined charge-transfer emitters.

Charge-transfer (CT) complexes, formed by electron transfer from a donor to an acceptor, play a crucial role in organic semiconductors. Excited-state CT complexes, termed exciplexes, harness both singlet and triplet excitons for light emission, and are thus useful for organic light-emitting diodes (OLEDs). However, present exciplex emitters often suffer from low photoluminescence quantum efficiencies (PLQEs), due to limited control over the relative orientation, electronic coupling and non-radiative recombination channels of the donor and acceptor subunits. Here, we use a rigid linker to control the spacing and relative orientation of the donor and acceptor subunits, as demonstrated with a series of intramolecular exciplex emitters based on 10-phenyl-9,10-dihydroacridine and 2,4,6-triphenyl-1,3,5-triazine. Sky-blue OLEDs employing one of these emitters achieve an external quantum efficiency (EQE) of 27.4% at 67 cd m-2 with only minor efficiency roll-off (EQE = 24.4%) at a higher luminous intensity of 1,000 cd m-2. As a control experiment, devices using chemically and structurally related but less rigid emitters reach substantially lower EQEs. These design rules are transferrable to other donor/acceptor combinations, which will allow further tuning of emission colour and other key optoelectronic properties.

Multi-Layer π-Stacked Molecules as Efficient Thermally Activated Delayed Fluorescence Emitters.

Multi-layer π-stacked emitters based on spatially confined donor/acceptor/donor (D/A/D) patterns have been developed to achieve high-efficiency thermally activated delayed fluorescence (TADF). In this case, dual donor moieties and a single acceptor moiety are introduced to form two three-dimensional (3D) emitters, DM-BD1 and DM-BD2, which rely on spatial charge transfer (CT). Owing to the enforced face-to-face D/A/D pattern, effective CT interactions are realized, which lead to high photoluminescence quantum yields (PLQYs) of 94.2 % and 92.8 % for the two molecules, respectively. The resulting emitters exhibit small singlet-triplet energy splitting (ΔEST ) and fast reverse intersystem crossing (RISC) processes. Maximum external quantum efficiencies (EQEs) of 28.0 % and 26.6 % were realized for devices based on DM-BD1 and DM-BD2, respectively, which are higher than those of their D/A-type analogues.

Circularly Polarized Thermally Activated Delayed Fluorescence Emitters in Through-Space Charge Transfer on Asymmetric Spiro Skeletons.

This work describes a strategy to produce circularly polarized thermally activated delayed fluorescence (CP-TADF). A set of two structurally similar organic emitters SFST and SFOT are constructed, whose spiro architectures containing asymmetric donors result in chirality. Upon grafting within the spiro frameworks, the donor and acceptor are fixed proximally in a face-to-face manner. This orientation allows intramolecular through-space charge transfer (TSCT) to occur in both emitters, leading to TADF properties. The donor units in SFST and SFOT have a sulfur and oxygen atom, respectively; such a subtle difference has great impacts on their photophysical, chiroptical, and electroluminescence (EL) properties. SFOT exhibits greatly enhanced EL performance in doped organic light-emitting diodes, with external quantum efficiency (EQE) up to 23.1%, owing to the concurrent manipulation of highly photoluminescent quantum efficiency (PLQY, ∼90%) and high exciton utilization. As a comparison, the relatively larger sulfur atom in SFST introduces heavy atom effects and leads to distortion of the molecular backbone that lengthens the donor-acceptor distance. SFST thus has lower PLQY and faster nonradiative decay rate. The collective consequence is that the EQE value of SFST, i.e., 12.5%, is much lower than that of SFOT. The chirality of these two spiro emitters results in circularly polarized luminescence. Because SFST has a more distorted molecular architecture than SFOT, the luminescence dissymmetry factor (|glum|) of circularly polarized luminescence of one enantiomer of the former, namely, either (S)-SFST or (R)-SFST, is almost twice that of (S)-SFOT/(R)-SFOT. Moreover, the CP organic light-emitting diodes (CP-OLEDs) show obvious circularly polarized electroluminescence (CPEL) signals with gEL of 1.30 × 10-3 and 1.0 × 10-3 for (S)-SFST and (S)-SFOT, respectively.

Sky-Blue Thermally Activated Delayed Fluorescence with Intramolecular Spatial Charge Transfer Based on a Dibenzothiophene Sulfone Emitter.

Intramolecular spatial charge transfer (ISCT) plays a critical role in determining the optical and charge transport properties of thermally activated delayed fluorescence (TADF) materials. Herein, a new donor/acceptor-type TADF compound based on rigid dibenzothiophene sulfone (DBTS) moiety, STF-DBTS, was designed and synthesized. Fluorene unit was used as a rigid linker to position the rigid acceptor and donor subunit in close vicinity with control over their spacing and molecular structure and to achieve high photoluminescence quantum yield (∼53%) and TADF property. For comparison purposes, we constructed the more flexible STF-DPS with a less rotationally constrained diphenylsulphone (DPS) acceptor instead of the rigid DBTS units, and STF-DPS showed no TADF properties and lower PLQY (16.0%). Organic light-emitting diodes (OLEDs) based on STF-DBTS achieve an external quantum efficiency (EQE) of 10.3% at 488 nm, which is a fivefold improvement in EQE with respect to STF-DPS.

Near-Infrared Electroluminescence beyond 800†nm with High Efficiency and Radiance from Anthracene Cored Emitters.

Derivatives based on anthryleno[1,2-b]pyrazine-2,3-dicarbonitrile (DCPA) are used as luminescent materials, to realize near-infrared (NIR) electroluminescence. By functionalizing DCPA with aromatic amine donors, two emitters named DCPA-TPA and DCPA-BBPA are designed and synthesized. Both molecules have large dipole moments owing to the strong intramolecular charge transfer interactions between the amine donors and the DCPA acceptor. Thus, compared with doped films, the emission of neat films of DCPA-TPA and DCPA-BBPA can fully fall into the NIR region (>700 nm) with increasing surrounding polarity by increasing doping ratio. Moreover, the non-doped devices based on DCPA-TPA and DCPA-BBPA provide NIR emission with peaks at 838 and 916 nm, respectively. A maximum radiance of 20707 mW Sr-1 m-2 was realized for the further optimized device based on DCPA-TPA. This work provides a simple and efficient strategy of molecular design for developing NIR emitting materials.

C1-Linked Spirobifluorene Dimers: Pure Hydrocarbon Hosts for High-Performance Blue Phosphorescent OLEDs.

Reported here are C1-linked spiro-bifluorene dimers. A comprehensive study is carried out to analyze the electronic properties of these highly twisted structures. This work shows that the C1-position enables the design of pure hydrocarbon materials, with a high triplet energy, for hosting blue phosphors in efficient phosphorescent OLEDs (PhOLEDs). To date, this work describes the highest performance of blue PhOLEDs ever reported for pure hydrocarbons (external quantum efficiency of ca. 23 %), thus highlighting the potential of the C1-spirobifluorene scaffold in organic electronics.

An Imide-Based Pentacyclic Building Block for n-Type Organic Semiconductors.

A new electron-deficient unit with a fused 5-membered heterocyclic ring was developed by replacing a cyclopenta-1,3-diene from electron-rich donor indacenodithiophene (IDT) with a cyclohepta-4,6-diene-1,3-diimde unit. The imide bridge endows dithienylbenzenebisimide (BBI) with a fixed planar configuration and low energy levels for both the highest occupied molecular orbital (HOMO; -6.24 eV) and the lowest unoccupied molecular orbit (LUMO; -2.57 eV). Organic field-effect transistors (OFETs) based on BBI polymers exhibit electron mobility up to 0.34 cm2 V-1 s-1 , which indicates that the BBI is a promising n-type building block for optoelectronics.

The Control of Conjugation Lengths and Steric Hindrance to Modulate Aggregation-Induced Emission with High Electroluminescence Properties and Interesting Optical Properties.

A series of novel AIE-active (aggregation-induced emission) molecules, named SAF-2-TriPE, SAF-3-TriPE, and SAF-4-TriPE, were designed and synthesized through facile reaction procedures. We found that incorporation of the spiro-acridine-fluorene (SAF) group, which is famous for its excellent hole-transporting ability and rigid structure, at different substitution positions on the phenyl ring affected the conjugation lengths of these compounds. Consequently, we have obtained molecules with different emission colors and properties without sacrificing good EL (electroluminescence) characteristics. Accordingly, a device that was based on compound SAF-2-TriPE displayed superior EL characteristics: it emitted green light with ηc, max =10.5 cd A(-1) and ηext, max =4.22 %, whereas a device that was based on compound SAF-3-TriPE emitted blue-green light with ηc, max =3.9 cd A(-1) and ηext, max = 1.71 %. These compounds also displayed different AIE performances: when the fraction of water in the THF solutions of these compounds was increased, we observed a significant improvement in the ΦF of compounds SAF-2-TriPE and SAF-3-TriPE; in contrast, compound SAF-4-TriPE showed an abnormal phenomenon, in that it emitted a strong fluorescence in both pure THF solution and in the aggregated state without a significant change in ΦF . Overall, this systematic study confirmed a relationship between the regioisomerism of the luminophore structure and its AIE activity and the resulting electroluminescent performance in non-doped devices.

Silicon-based material with spiro-annulated fluorene/triphenylamine as host and exciton-blocking layer for blue electrophosphorescent devices.

A novel silicon-based compound, 10-phenyl-2'-(triphenylsilyl)-10H-spiro[acridine-9,9'-fluorene] (SSTF), with spiro structure has been designed, synthesized, and characterized. Its thermal, electronic absorption, and photoluminescence properties were studied. Its energy levels make it suitable as a host material or exciton-blocking material in blue phosphorescent organic light-emitting diodes (PhOLEDs). Accordingly, blue-emitting devices with iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,C(2)']picolinate (FIrpic) as phosphorescent dopant have been fabricated and show high efficiency with low roll-off. In particular, 44.0 cd A(-1) (41.3 lm W(-1)) at 100 cd m(-2) and 41.9 cd A(-1) (32.9 lm W(-1)) at 1000 cd m(-2) were achieved when SSTF was used as host material; 28.1 lm W(-1) at 100 cd m(-2) and 20.6 lm W(-1) at 1000 cd m(-2) were achieved when SSTF was used as exciton-blocking layer. All of the results are superior to those of the reference devices and show the potential applicability and versatility of SSTF in blue PhOLEDs.

Design and Synthesis of Red Through-Space Charge Transfer Thermally Activated Delayed Fluorescence Emitters with Donor/Acceptor/Donor Stacking.

Red through-space charge transfer thermally activated delayed fluorescence (TSCT TADF) materials named SAF36DCPP and SAF27DCPP with sandwiched structures were synthesized. Single crystals indicated that the intramolecular C-H···π interactions play a vital role in rigidifying the sandwiched structure, which results in a fluorescence yield of 63% for SAF36DCPP compared to 40% for SAF27DCPP. Organic light-emitting diodes with SAF36DCPP as the emitter realized a maximum external quantum efficiency of 16.12%.

New dibenzofuran/spirobifluorene hybrids as thermally stable host materials for efficient phosphorescent organic light-emitting diodes with low efficiency roll-off.

A new class of host materials DBFSF (DBFSF2 and DBFSF4) is facilely synthesized through a Suzuki coupling reaction between dibenzofuran and spirobifluorene. Their thermal, electrochemical, electronic absorption and photoluminescent properties are fully investigated. High glass transition temperatures (T(g)) of 115 °C and 124 °C are observed for DBFSF2 and DBFSF4, respectively, due to the introduction of bulky spirobifluorene groups. As expected, the DBFSF4 with a twisted-linkage exhibits higher triplet energy than DBFSF2 and can be used in blue and green phosphorescent OLEDs. Electrophosphorescent devices with DBFSF2 and DBFSF4 as hosts were fabricated. Besides the good current efficiencies of 22.2 cd A(-1) for blue and 64.4 cd A(-1) for green, low efficiency roll-off has also been achieved for both devices.