RESUMO
Photonic crystal lasers with a high-Q factor and small mode volume are ideal light sources for on-chip nano-photonic integration. Due to the submicron size of their active region, it is usually difficult to achieve high output power and single-mode lasing at the same time. In this work, we demonstrate well-selected single-mode lasing in a line-defect photonic crystal cavity by coupling it to the high-Q modes of a short double-heterostructure photonic crystal cavity. One of the FP-like modes of the line-defect cavity can be selected to lase by thermo-optically tuning the high-Q mode of the short cavity into resonance. Six FP-like modes are successively tuned into lasing with side mode suppression ratios all exceeding 15 dB. Furthermore, we show a continuous wavelength tunability of about 10 nm from all the selected modes. The coupled cavity system provides a remarkable platform to explore the rich laser physics through the spatial modulation of vacuum electromagnetic field at submicron scale.
RESUMO
We demonstrate an effective method for fabricating large area periodic two-dimensional semiconductor nanostructures by means of single-pulse laser interference. Utilizing a pulsed nanosecond laser with a wavelength of 355 nm, precisely ordered square arrays of nanoholes with a periodicity of 300 nm were successfully obtained on UV photoresist and also directly via a resist-free process onto semiconductor wafers. We show improved uniformity using a beam-shaping system consisting of cylindrical lenses with which we can demonstrate highly regular arrays over hundreds of square micrometers. We propose that our novel observation of direct pattern transfer to GaAs is due to local congruent evaporation and subsequent droplet etching of the surface. The results show that single-pulse interference can provide a rapid and highly efficient route for the realization of wide-area periodic nanostructures on semiconductors and potentially on other engineering materials.
RESUMO
The effective manipulation of mode oscillation and competition is of fundamental importance for controlling light emission in semiconductor lasers. Here we develop a rate equation model which considers the spatially modulated gain and spontaneous emission, which are inherently governed by the ripple of the vacuum electromagnetic field in a Fabry-Pérot (FP) microcavity. By manipulating the interplay between the spatial oscillation of the vacuum field and external optical injection via dual-beam laser interference, single longitudinal mode operation is observed in a FP-type microcavity with a side mode suppression ratio exceeding 40 dB. An exploration of this extended rate equation model bridges the gap between the classical model of multimode competition in semiconductor lasers and a quantum-optics understanding of radiative processes in microcavities.
RESUMO
The construction of a large-scale quantum internet requires quantum repeaters containing multiple entangled photon sources with identical wavelengths. Semiconductor quantum dots can generate entangled photon pairs deterministically with high fidelity. However, realizing wavelength-matched quantum-dot entangled photon sources faces two difficulties: the non-uniformity of emission wavelength and exciton fine-structure splitting induced fidelity reduction. Typically, these two factors are not independently tunable, making it challenging to achieve simultaneous improvement. In this work, we demonstrate wavelength-tunable entangled photon sources based on droplet-etched GaAs quantum dots through the combined use of AC and quantum-confined Stark effects. The emission wavelength can be tuned by ~1 meV while preserving an entanglement fidelity f exceeding 0.955(1) in the entire tuning range. Based on this hybrid tuning scheme, we finally demonstrate multiple wavelength-matched entangled photon sources with f > 0.919(3), paving the way towards robust and scalable on-demand entangled photon sources for quantum internet and integrated quantum optical circuits.
RESUMO
Coherently driven semiconductor quantum dots are one of the most promising platforms for non-classical light sources and quantum logic gates which form the foundation of photonic quantum technologies. However, to date, coherent manipulation of single charge carriers in quantum dots is limited mainly to their lowest orbital states. Ultrafast coherent control of high-orbital states is obstructed by the demand for tunable terahertz pulses. To break this constraint, we demonstrate an all-optical method to control high-orbital states of a hole via a stimulated Auger process. The coherent nature of the Auger process is proved by Rabi oscillation and Ramsey interference. Harnessing this coherence further enables the investigation of the single-hole relaxation mechanism. A hole relaxation time of 161 ps is observed and attributed to the phonon bottleneck effect. Our work opens new possibilities for understanding the fundamental properties of high-orbital states in quantum emitters and for developing new types of orbital-based quantum photonic devices.
RESUMO
BACKGROUND: Computed tomography (CT) is a noninvasive imaging approach to assist the early diagnosis of pneumonia. However, coronavirus disease 2019 (COVID-19) shares similar imaging features with other types of pneumonia, which makes differential diagnosis problematic. Artificial intelligence (AI) has been proven successful in the medical imaging field, which has helped disease identification. However, whether AI can be used to identify the severity of COVID-19 is still underdetermined. METHODS: Data were extracted from 140 patients with confirmed COVID-19. The severity of COVID-19 patients (severe vs. non-severe) was defined at admission, according to American Thoracic Society (ATS) guidelines for community-acquired pneumonia (CAP). The AI-CT rating system constructed by Hangzhou YITU Healthcare Technology Co., Ltd. was used as the analysis tool to analyze chest CT images. RESULTS: A total of 117 diagnosed cases were enrolled, with 40 severe cases and 77 non-severe cases. Severe patients had more dyspnea symptoms on admission (12 vs. 3), higher acute physiology and chronic health evaluation (APACHE) II (9 vs. 4) and sequential organ failure assessment (SOFA) (3 vs. 1) scores, as well as higher CT semiquantitative rating scores (4 vs. 1) and AI-CT rating scores than non-severe patients (P<0.001). The AI-CT score was more predictive of the severity of COVID-19 (AUC=0.929), and ground-glass opacity (GGO) was more predictive of further intubation and mechanical ventilation (AUC=0.836). Furthermore, the CT semiquantitative score was linearly associated with the AI-CT rating system (Adj R 2=75.5%, P<0.001). CONCLUSIONS: AI technology could be used to evaluate disease severity in COVID-19 patients. Although it could not be considered an independent factor, there was no doubt that GGOs displayed more predictive value for further mechanical ventilation.
RESUMO
Precisely ordered arrays of InAs quantum dots are formed on a nanoisland-structured GaAs (100) surface using in situ laser interference during self-assembled molecular beam epitaxial growth. Nanoislands induced by single-pulse four-beam laser interference act as preferential nucleation sites for InAs quantum dots and result in site occupation dependent on the size of nanoislands, the InAs coverage, and the laser parameters. By optimizing the growth and interference conditions, regular dense ordering of single dots was obtained for the first time using this in situ noninvasive approach. The photoluminescence spectra of the resulting quantum dot arrays with a period of 300 nm show good optical quality and uniformity. This technique paves the way for the rapid large-scale fabrication of arrays of single dots to enable quantum information technology device platforms.
RESUMO
We demonstrate broadband and wide-angle antireflective surface nanostructuring in GaAs semiconductors using variable dose electron-beam lithography (EBL). Various designed structures are written with EBL on a positive EB-resist coated GaAs and developed followed by shallow inductively coupled plasma etching. An optimized nanostructured surface shows a reduced surface reflectivity down to less than 2.5% in the visible range of 450-700 nm and an average reflectance of less than 4% over a broad near-infrared wavelength range from 900-1400 nm. The results are obtained over a wide incidence angle of 33.3°. This study shows the potential for anti-reflective structures using a simpler reverse EBL process which can provide optical absorption or extraction efficiency enhancement in semiconductors relevant to improved performance in solar photovoltaics or light-emitting diodes.
RESUMO
The radiative interaction of solid-state emitters with cavity fields is the basis of semiconductor microcavity lasers and cavity quantum electrodynamics (CQED) systems. Its control in real time would open new avenues for the generation of non-classical light states, the control of entanglement and the modulation of lasers. However, unlike atomic CQED or circuit quantum electrodynamics, the real-time control of radiative processes has not yet been achieved in semiconductors because of the ultrafast timescales involved. Here we propose an ultrafast non-local moulding of the vacuum field in a coupled-cavity system as an approach to the control of radiative processes and demonstrate the dynamic control of the spontaneous emission (SE) of quantum dots (QDs) in a photonic crystal (PhC) cavity on a â¼ 200 ps timescale, much faster than their natural SE lifetimes.