RESUMO
BACKGROUND: Polypropylene (PPE) mesh is commonly utilized to reconstruct catastrophic extensor mechanism disruptions in revision total knee arthroplasty. Unfortunately, these procedures are associated with a high rate of periprosthetic joint infection. The purpose of the current study was to: 1) visualize and quantify the progression of bacterial biofilm growth on PPE-mesh; and 2) determine which antiseptic solutions effectively remove viable bacteria. METHODS: Knitted PPE mesh samples were cultured with either methicillin-sensitive Staphylococcus aureus (MSSA) or Escherichia coli (E. coli) for 7 days, with regular quantification of colony forming units (CFUs) and visualization using scanning electron microscopy to identify maturity. Immature (24 hour) and mature (72 hour) biofilm was treated with one of 5 commercial antiseptics for 3 minutes. A 0.05% chlorhexidine gluconate, a surfactant-based formulation of ethanol, acetic acid, sodium acetate, benzalkonium chloride, diluted povidone-iodine (0.35%), undiluted (10%) povidone-iodine, and 1:1 combination of 10% povidone-iodine and 3% hydrogen peroxide. A 3-log reduction in CFUs compared to saline was considered clinically meaningful. RESULTS: The CFU counts plateaued, indicating maturity, at 72 hours for both MSSA and E. coli. The scanning electron microscopy confirmed confluent biofilm formation after 72 hours. The 10% povidone-iodine was clinically effective against all MSSA biofilms and immature E. coli biofilms. The 10% povidone-iodine with hydrogen peroxide was effective in all conditions. Only 10% povidone iodine formulations produced significantly (P < .0083) reduced CFU counts against mature biofilms. CONCLUSIONS: Bacteria rapidly form biofilm on PPE mesh. Mesh contamination can be catastrophic, and clinicians should consider utilizing an antiseptic solution at the conclusion of mesh implantation. Undiluted povidone-iodine with hydrogen peroxide should be considered when attempting to salvage infected PPE mesh.
Assuntos
Anti-Infecciosos Locais , Biofilmes , Escherichia coli , Polipropilenos , Staphylococcus aureus , Telas Cirúrgicas , Biofilmes/efeitos dos fármacos , Telas Cirúrgicas/microbiologia , Escherichia coli/efeitos dos fármacos , Humanos , Staphylococcus aureus/efeitos dos fármacos , Infecções Relacionadas à Prótese/microbiologia , Infecções Relacionadas à Prótese/prevenção & controle , Povidona-Iodo/farmacologia , Clorexidina/análogos & derivados , Clorexidina/farmacologia , Microscopia Eletrônica de VarreduraRESUMO
BACKGROUND: The aim of this study is to validate the point of normalization of braking following total hip arthroplasty (THA) and to determine the relevance of the surgical approach. METHODS: Brake reaction parameters (BRPs), including brake reaction time, total brake time, and brake pedal depression force were measured in 90 patients who underwent primary arthroplasty of the right hip (42 with direct anterior approach and 48 with posterolateral approach) using a modern driving simulator. The driving parameters were measured preoperatively and every 2 weeks postoperatively until the eighth week. BRPs were measured in 40 subjects without hip problems, and the results were used as a control. Statistical assessment was performed to analyze when the patients' reaction to braking recovered to that of the control group with respect to different surgical approaches and also according to the pain. RESULTS: Preoperative BRPs of the patients undergoing THA were prolonged compared to the control group and were normalized at the sixth week following the operation. Although BRPs of the direct anterior approach group showed significantly better improvement compared to the posterolateral approach group (total brake time at week 2, brake reaction time and brake pedal depression at week 4), both groups reached baseline value at week 6. In addition, we found no correlation between the pain score and BRPs. CONCLUSION: The results of the current study indicate that the response to braking events normalizes at 6 weeks following THA in young active patients and is irrelevant to the surgical approach.
Assuntos
Artroplastia de Quadril , Condução de Veículo , Artroplastia de Quadril/métodos , Quadril , Humanos , Dor , Tempo de Reação/fisiologiaRESUMO
Background and Objectives: This study aimed to compare the biomechanical properties and outcomes of osteoporotic intertrochanteric fractures treated with two different helical blade systems, the trochanteric fixation nail-advanced (TFNA) and proximal femoral nail antirotation II (PFNA), to evaluate the efficacy and safety of the newly introduced TFNA system. Materials and Methods: A biomechanical comparison of the two helical blades was performed using uniaxial compression tests on polyurethane foam blocks of different densities. The peak resistance (PR) and accumulated resistance (AR) were measured during the 20 mm advancement through the test block. For clinical comparison, 63 osteoporotic intertrochanteric fractures treated with TFNA were identified and compared with the same number of fractures treated with PFNA using propensity score matching. Ambulatory status, medial migration, lateral sliding, fixation failure, and patient-reported outcomes were compared between the two groups over a minimum of 1 year's follow up. Results: The uniaxial compression test showed that a slightly, but significantly lower resistance was required to advance the TFNA through the test block compared with the PFNA (20 PCF, p = 0.017 and p = 0.026; 30 PCF, p = 0.007 and p = 0.001 for PR and AR, respectively). Clinically, the two groups showed no significant differences in post-operative ambulatory status and patient-reported outcomes. However, in TFNA groups, significantly more medial migration (TFNA, 0.75 mm; PFNA, 0.40 mm; p = 0.0028) and also, lateral sliding was noted (TFNA, 3.99 mm; PFNA, 1.80 mm; p = 0.004). Surgical failure occurred in four and two fractures treated with the TFNA and PFNA, respectively. Conclusions: The results of our study suggest that the newly introduced TFNA provides clinical outcomes comparable with those of the PFNA. However, inferior resistance to medial migration in the TFNA raises concerns regarding potential fixation failures.
Assuntos
Fixação Intramedular de Fraturas , Fraturas do Quadril , Humanos , Estudos Retrospectivos , Pinos Ortopédicos , Fraturas do Quadril/cirurgia , Fixação Interna de Fraturas , Fixação Intramedular de Fraturas/métodos , Resultado do TratamentoRESUMO
Background and Objectives: Anterior capsulotomy is routinely performed in hip arthroscopy to improve joint visualization; however, this can partly or completely disrupt the stabilizing ligaments of the hip. This study aimed to report the effects of conventional and extensive arthroscopic capsulotomies on hip stability. Materials and Methods: Eight freshly frozen cadaveric pelvises were used in this study. The range of motion and translation were measured and compared among different capsular conditions utilized in hip arthroscopy, with a special interest in the iliofemoral ligament (IFL) and zona orbicularis (ZO). The conditions included intact capsule, interportal capsulotomy, T-capsulotomy, complete IFL disruption, and complete IFL and ZO disruption. Internal rotation at three flexion planes (-10°, 0°, and 30°) and external rotation at six flexion planes (-10°, 0°, 30°, 60°, 90°, and 110°) were measured with corresponding femoral head translation distance at the application of 2.5 Nm torque. Results: As compared to an intact capsule, a significant increase in external rotation was observed after interportal capsulotomy from -10° to 60° and after T-capsulotomy from -10° to 110° flexion. A significant translation was observed only with a T-capsulotomy, which ranged from 1.9 to 2.3 mm across the flexion angles. Compared with conventional interportal capsulotomy, disruption of the entire IFL resulted in a significant increase in external rotation in all flexion planes, and significant translation was accompanied by disruption of the ZO. Conclusions: Interportal capsulotomy can result in an increase in range of motion, and T-capsulotomy can lead to significant translation. Partial or complete tears of the IFL and ZO can result in further external rotation and translation.
Assuntos
Artroscopia , Doenças Musculoesqueléticas , Humanos , Artroscopia/métodos , Fenômenos Biomecânicos , Cadáver , Articulação do Quadril/cirurgia , Amplitude de Movimento ArticularRESUMO
BACKGROUND: Resuming driving is a common concern among patients undergoing hip arthroscopy. The present study aimed to assess whether patients who had undergone right hip arthroscopy presented with poorer driving performance than patients with normal hips and to analyze the time required to regain preoperative driving performance. METHODS: Forty-seven patients who had undergone right hip arthroscopy and consented to our test protocol were included in this study. Using an immersive driving simulator, the patients were tested for their brake reaction time (BRT), total brake time (TBT), and brake pedal depression (BPD) preoperatively and postoperatively. The first postoperative assessments were conducted when the patients could comfortably sit on the driving seat, and the follow-up assessments were conducted for 6 consecutive weeks at weekly intervals. The patients were divided into the following two groups based on the type of surgery that they underwent: the femoroacetabular impingement (FAI) surgery group and the simple hip arthroscopy (SA) group. Twenty healthy volunteers underwent driving assessments thrice at weekly intervals and constituted the control group. The braking parameters were compared between preoperative and postoperative measurements and among the FAI surgery, SA, and control groups. RESULTS: The preoperative braking parameters of the patients who underwent arthroscopy did not differ significantly from those of the controls (p = 0.373, 0.763, and 0.447 for the BRT, TBT, and BPD, respectively). All braking parameters returned to normal in 2 weeks in the FAI surgery group and in 1 week in the SA group. CONCLUSIONS: Our study suggests that the driving performance of patients who underwent right hip arthroscopy is comparable to that of individuals with normal hips and that the braking parameters may normalize to the preoperative state at 1 week after SA and 2 weeks after FAI surgery.
Assuntos
Artroscopia , Impacto Femoroacetabular , Quadril , Articulação do Quadril/diagnóstico por imagem , Articulação do Quadril/cirurgia , Humanos , Período Pós-Operatório , Resultado do TratamentoRESUMO
BACKGROUND: Several methods using simple anteroposterior (AP) radiographs have been suggested for the measurement of anteversion of the cup component after total hip arthroplasty. Herein, we compared six widely used anteversion measurement methods using two different types of AP radiograph, the conventional pelvis AP and hip-centered AP radiographs, to identify the measurement method and the type of radiograph that would provide the highest accuracy and reliability. METHODS: We developed two custom-made bi-planar anteversion measurement models for the validation test. The models were designed for pelvis AP and hip-centered AP radiographs, respectively. The radiographs were acquired using the inclination angles of both models, changing from 10° to 70° at 10° increments. For each inclination angle, anteversion was changed from 0° to 30° at 5° increments. The measurements were obtained independently by two orthopedic surgeons blinded from each other's measurements, using the methods of 1) Pradhan et al., 2) Lewinnek et al., 3) Widmer et al., 4) Liaw et al., 5) Hassan et al., and 6) Ackland et al. The measurements were repeated after 2 months. The accuracy, compared with that of the reference angle, and intra-observer and inter-observer reliabilities of each method were calculated. RESULTS: The highest accuracy was found when the method of Liaw et al. was used with hip-centered AP radiographs, which showed a difference of 1.37° ± 1.73 from the reference angle. Moreover, regardless of the type of radiograph, the methods by Pradhan et al., Lewinnek et al., and Liaw et al. showed excellent correlations with the reference anteversion. However, substantial differences were found when the methods by Widmer et al., Hassan et al., and Ackland et al. were used, regardless of the type of radiograph used. When anteversion was measured in an inclination between 30° and 50°, the method of Pradhan et al., when used with pelvis AP radiographs, showed the highest accuracy (1.23° ± 0.92°). We also found no significant difference in anteversions between the measurements made on pelvic and hip-centered AP radiographs. Both interobserver and intraobserver reliabilities were high for all the measurements tested. CONCLUSIONS: The methods by Pradhan et al., Liaw et al., and Lewinnek et al. may provide relatively accurate anteversion measurements with high reliability, regardless of the type of radiograph.
Assuntos
Artroplastia de Quadril/métodos , Articulação do Quadril/anatomia & histologia , Prótese de Quadril/efeitos adversos , Complicações Pós-Operatórias/prevenção & controle , Radiografia/métodos , Acetábulo/anatomia & histologia , Acetábulo/diagnóstico por imagem , Acetábulo/cirurgia , Artroplastia de Quadril/efeitos adversos , Artroplastia de Quadril/instrumentação , Articulação do Quadril/diagnóstico por imagem , Articulação do Quadril/cirurgia , Humanos , Modelos Anatômicos , Complicações Pós-Operatórias/etiologia , Valores de Referência , Reprodutibilidade dos TestesRESUMO
PURPOSE: To determine the contribution of the ligamentum teres (LT) to hip stability in the presence of an intact capsule with special attention to the change in range of motion and femoral head translation. METHODS: Seven fresh-frozen cadaveric pelvises were used. Following visual inspection of the LT at different hip positions, internal rotation angles were measured at 10° of extension and at 0° of flexion, while external rotation was measured at 60°, 90°, and 110° of flexion with different hip abduction angles using electromagnetic motion tracking sensor. Femoral head translations were measured simultaneously. The tests were repeated after resection of the LT. The capsule was left intact for all test conditions. The results were compared between intact and LT resected conditions when torque of 2 and 4 Nm was applied. RESULTS: Compared with the intact hip, the LT resected hip showed no significant difference when 2 Nm torque was applied in all scenarios. With 4 Nm torque application, significant increase in external rotation was found at 60° and at 90° of flexion (1.7° ± 0.8° and 2.1° ± 1.0°, respectively). Significant difference was also noted at 60°, 90°, and 110° of flexion when the hip was in the adducted position while at 90° in the abducted hip. However, LT resection did not show significant change in internal rotation. There was no significant difference in the translation distance of the femoral head in the intact hip compared with the LT resected hip (0.77-1.11 mm vs 0.79-1.29 mm). CONCLUSIONS: Our results indicate that within the physiologic range of motion, LT can minimally limit external rotation when the hip is in the flexed position but does not contribute to translation stability. CLINICAL RELEVANCE: In the hip with intact capsule, LT deficiency can result in a slight increase in range of motion, but its contribution to stability is questionable.
Assuntos
Articulação do Quadril/fisiologia , Ligamentos Redondos/fisiologia , Idoso , Fenômenos Biomecânicos/fisiologia , Cadáver , Feminino , Cabeça do Fêmur/fisiologia , Humanos , Instabilidade Articular/fisiopatologia , Masculino , Pessoa de Meia-Idade , Exame Físico , Amplitude de Movimento Articular/fisiologia , Rotação , Ligamentos Redondos/lesões , TorqueRESUMO
PURPOSE: To validate whether the Bernard quadrant method, which was developed for application on simple lateral radiography, can be used with 3-dimensional computed tomography (3D CT) to localize the femoral insertion of the reconstructed anterior cruciate ligament (ACL). METHODS: We analyzed 32 knees with ACL tears that were reconstructed using a metal interference screw for fixation at the femoral tunnel between March 2012 and May 2013. Postoperative lateral radiographs and 3D CT images were obtained 7 days after the operation. By use of the Bernard quadrant method, the location of the femoral tunnel was measured by 2 orthopaedic surgeons by locating the position of the metal interference screw using 3D CT imaging and simple lateral knee radiography. The correlation between the femoral tunnels on the 2 radiographic images was compared using the MedCalc statistical analysis program. RESULTS: On the 3D CT image, the position of the femoral insertion of the ACL as measured by the position of the metal screw head was 36.3% ± 6.0% in the x-coordinate and 39.6% ± 9.1% in the y-coordinate compared with 37.6% ± 5.8% and 41.0% ± 11.6%, respectively, on the simple radiograph. The Pearson correlation coefficients between 3D CT and simple radiography were 0.840 for the x-coordinate and 0.858 for the y-coordinate. Intraobserver reliability and interobserver reliability for both coordinates were greater than 0.9 on 3D CT. CONCLUSIONS: Application of the Bernard quadrant method on 3D CT showed high correlation to the originally described method using lateral radiographs and can be used reliably for localizing the reconstructed ACL. LEVEL OF EVIDENCE: Level III, diagnostic study.
Assuntos
Lesões do Ligamento Cruzado Anterior/diagnóstico por imagem , Lesões do Ligamento Cruzado Anterior/cirurgia , Reconstrução do Ligamento Cruzado Anterior/métodos , Fêmur/diagnóstico por imagem , Adolescente , Adulto , Parafusos Ósseos , Feminino , Fêmur/cirurgia , Humanos , Imageamento Tridimensional/métodos , Articulação do Joelho/diagnóstico por imagem , Articulação do Joelho/cirurgia , Masculino , Pessoa de Meia-Idade , Variações Dependentes do Observador , Período Pós-Operatório , Radiografia , Reprodutibilidade dos Testes , Tomografia Computadorizada por Raios X/métodos , Adulto JovemRESUMO
A retrospective analysis was conducted on 539 hips undergoing revision total hip arthroplasty done for instability to report the cumulative risk and factors associated with re-dislocation and re-revision. The cumulative risk of re-dislocation and re-revision for all cause was 34.5% and 45.9% at 15 years, respectively. Multiple variable analyses revealed history of 2 or more previous surgeries, use of head size less than 36 mm, and cup retention to be risk factors for re-dislocation and re-revision. The use of a constrained liner was protective against re-dislocation but was not associated with a lower re-revision rate. Understanding the risk factors associated with re-dislocation or re-revision may help with perioperative decision making in order to decrease the high failure rate seen in this study.
Assuntos
Artroplastia de Quadril/efeitos adversos , Luxação do Quadril/etiologia , Instabilidade Articular/cirurgia , Reoperação/efeitos adversos , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Prótese de Quadril/efeitos adversos , Humanos , Masculino , Pessoa de Meia-Idade , Análise Multivariada , Falha de Prótese , Estudos Retrospectivos , Fatores de Risco , Fatores de Tempo , Resultado do TratamentoRESUMO
The binding between receptoractivated nuclear factorκB (RANK) and the RANK ligand (RANKL) during osteoclast development is an important target for drugs that treat osteoporosis. The leucinerich repeatcontaining Gproteincoupled receptor 4 (LGR4) acts as a negative regulator of RANKRANKL that suppresses canonical RANK signaling during osteoclast differentiation. Therefore, LGR4 agonists may be useful in inhibiting osteoclastogenesis and effectively treating osteoporosis. In the present study, bone marrowderived macrophages and a mouse model of RANKLinduced bone loss were used to investigate the effect of mutant RANKL (MT RANKL), which was previously developed based on the crystal structure of the RANKL complex. In the present study, the binding affinity of wildtype (WT) RANKL and MT RANKL to RANK and LGR4 was determined using microscale thermophoresis analysis, and the effect of the ligands on the AKTglycogen synthase kinase3ß (GSK3ß)nuclear factor of activated T cells, cytoplasmic, calcineurindependent 1 (NFATc1) signaling cascade was investigated using western blotting and confocal microscopy. In addition, the expression of LGR4 and the colocalization of LGR4 with MT RANKL were analyzed in a mouse model of RANKLinduced bone loss. The results showed that in osteoclast precursor cells, MT RANKL bound with high affinity to LGR4 and increased GSK3ß phosphorylation independently of AKT, resulting in the inhibition of NFATc1 nuclear translocation. In the mouse model, MT RANKL colocalized with LGR4 and inhibited bone resorption. These results indicated that MT RANKL may inhibit RANKLinduced osteoclastogenesis through an LGR4dependent pathway and this could be exploited to develop new therapies for osteoporosis.
Assuntos
Reabsorção Óssea , Glicogênio Sintase Quinase 3 beta , Osteoporose , Animais , Camundongos , Reabsorção Óssea/tratamento farmacológico , Reabsorção Óssea/metabolismo , Diferenciação Celular , Células Cultivadas , Glicogênio Sintase Quinase 3 beta/efeitos dos fármacos , Glicogênio Sintase Quinase 3 beta/metabolismo , Macrófagos/metabolismo , NF-kappa B/metabolismo , Fatores de Transcrição NFATC/metabolismo , Osteoclastos/metabolismo , Osteogênese/efeitos dos fármacos , Osteoporose/tratamento farmacológico , Osteoporose/metabolismo , Proteínas Proto-Oncogênicas c-akt/metabolismo , Ligante RANK/efeitos dos fármacos , Ligante RANK/metabolismo , Receptores Acoplados a Proteínas G/agonistas , Receptores Acoplados a Proteínas G/metabolismoRESUMO
RATIONALE: Cartilage injuries of the femoral head may occur following hip dislocation. As a rare injury, controversy persists regarding ideal treatment of damaged femoral head cartilage. Here we report the case of a patient who developed a large cartilage injury to the femoral head following anterior hip dislocation for which autologous osteochondral mosaicplasty with a graft harvested from the ipsilateral femoral head achieved a satisfactory outcome. PATIENT CONCERNS: A 62-year-old man developed a right hip dislocation after a fall from a 5-m height and was referred to our institution. DIAGNOSES: The initial diagnosis was anterior hip dislocation. Upon hip joint reduction, a simple radiograph and computed tomography scan showed a large cartilage defect in the superolateral region of the femoral head. Multiple bony fragments were visible within the joint. INTERVENTIONS: The hip joint was surgically dislocated. The large cartilage defect of the femoral head was treated with autologous mosaicplasty using an osteochondral autograft transfer system using multiple osteochondral plugs retrieved from a non-weight-bearing portion of the ipsilateral femoral head. OUTCOMES: Diagnostic hip arthroscopy performed at 8 months postoperative confirmed full incorporation of the osteochondral graft into the native femoral head. At the 2-year follow-up, the patient was pain-free, had a normal range of motion and displayed no evidence of osteoarthritis. LESSONS: Isolated femoral head cartilage injuries may occur as a consequence of anterior hip dislocation. A femoral head with a large irregular cartilage defect can be treated with mosaicplasty using an osteochondral autograft from a non-weight-bearing portion of the ipsilateral femoral head.
Assuntos
Doenças das Cartilagens , Cartilagem Articular , Luxação do Quadril , Masculino , Humanos , Pessoa de Meia-Idade , Cabeça do Fêmur/diagnóstico por imagem , Cabeça do Fêmur/cirurgia , Cabeça do Fêmur/lesões , Luxação do Quadril/cirurgia , Transplante Ósseo/métodos , Resultado do Tratamento , Cartilagem/transplante , Transplante Autólogo , Cartilagem Articular/cirurgiaRESUMO
A proximal femoral nail using a helical blade (HB) is commonly utilized to treat proximal femoral fracture but cut through failure of the lag screws is one of the devastating complications following the surgery. While controversial, one of the potential risk factors for cut through failure is poor bone strength which can be predicted by measuring bone mineral density (BMD). In this study, we performed a biomechanical test on the fractured femoral head to validate whether the indirectly measured BMD from the contralateral hip or that measured directly from the retrieved femoral head can elucidate the structural strength of the fractured femoral head and thereby can be used to predict migration of lag screws. Our result showed that directly measured BMD has a significant correlation with the HB migration on the osteoporotic femoral head. However, while the BMDs measured from the contralateral femoral neck or total hip is the most widely used parameter to predict the bone strength of the fractured femur, this may have limited usability to predict HB migration.
Assuntos
Fraturas do Fêmur , Fraturas do Quadril , Humanos , Densidade Óssea , Parafusos Ósseos/efeitos adversos , Fêmur/diagnóstico por imagem , Fêmur/cirurgia , Cabeça do Fêmur/cirurgia , Fraturas do Fêmur/cirurgia , Fenômenos Biomecânicos , Fraturas do Quadril/cirurgia , Fraturas do Quadril/etiologiaRESUMO
Background: Preoperative verification of fracture morphology is essential for determining the definitive fixation strategy in the management of a pilon fracture. This study aimed to determine the correlation between fibular injury patterns and fracture morphologies and introduce clinical implications. Methods: Computed tomography scans of 96 pilon fractures were retrospectively analyzed and divided into three types: intact fibula, simple fracture, and multifragment fracture. The principal fracture line and comminution zones were illustrated on a plafond template and diagrammatized on a 6 × 6 grid using PowerPoint software as fracture mapping. Correlations between fibular injury patterns and fracture morphologies, including comminution zones and principal fracture lines, were analyzed. Results: The thickest comminution zone was most often located in the anterolateral quadrant. According to fibular injury patterns, the comminution zone of the multifragment group was placed two grids more lateral than that of other groups. Lateral exits of the principal fracture line in the multifragment group were much more concentrated within the fibular incisura. Conclusions: In pilon fractures, a more complex fibular fracture pattern was related to the valgus position. Moreover, the articular fracture pattern of pilon fractures differed according to coronal angulation and fibular fracture pattern. These differences should influence the operative approach and placement of the plate.
Assuntos
Fraturas do Tornozelo , Fraturas Cominutivas , Fraturas da Tíbia , Humanos , Fíbula/diagnóstico por imagem , Fíbula/cirurgia , Fíbula/lesões , Estudos Retrospectivos , Fraturas da Tíbia/diagnóstico por imagem , Fraturas da Tíbia/cirurgia , Fraturas do Tornozelo/cirurgia , Tomografia Computadorizada por Raios X , Fraturas Cominutivas/diagnóstico por imagem , Fraturas Cominutivas/cirurgia , Fixação Interna de Fraturas/métodos , Resultado do TratamentoRESUMO
Infection associated with biomedical implants remains the main cause of failure, leading to reoperation after orthopedic surgery. Orthopedic infections are characterized by microbial biofilm formation on the implant surface, which makes it challenging to diagnose and treat. One potential method to prevent and treat such complications is to deliver a sufficient dose of antibiotics at the onset of infection. This strategy can be realized by coating the implant with thermoregulatory polymers and triggering the release of antibiotics during the acute phase of infection. We developed a multi-layered temperature-responsive polymer brush (MLTRPB) coating that can release antibiotics once the temperature reaches a lower critical solution temperature (LCST). The coating system was developed using copolymers composed of diethylene glycol methyl ether methacrylate and 2-hydroxyethyl methacrylate by alternatively fabricating monomers layer by layer on the titanium surface. LCST was set to the temperature of 38-40 °C, a local temperature that can be reached during infection. The antibiotic elution characteristics were investigated, and the antimicrobial efficacy was tested against S. aureus species (Xen29 ATCC 29 213) using one to four layers of MLTRPB. Both in vitro and in vivo assessments demonstrated preventive effects when more than four layers of the coating were applied, ensuring promising antibacterial effects of the MLTRPB coating.
RESUMO
BACKGROUND: Postoperative pain following total hip arthroplasty (THA) may occur in a few patients but may pose a significant challenge to surgeons if the etiology is not identified. Herein, we report the case of a patient who developed late-onset pain following THA due to screw penetration of the iliopsoas tendon. CASE SUMMARY: We report the case of a 77-year-old man who developed inguinal pain 7 years after THA. While the symptoms resembled that of iliopsoas impingement by the acetabular cup, the pain resolved only when the supplementary acetabular screw protruding through the ilium was decompressed. Decompression was performed using the pararectus approach. The patient was able to ambulate pain-free immediately after surgery. CONCLUSION: A protruded screw through the ilium may penetrate the iliopsoas muscle, causing pain following THA. Pain may resolve with the decompression of the protruded screw.
RESUMO
Despite decades of biomedical advances, the colonization of implant devices with bacterial biofilms is still a leading cause of implant failure. Clearly, new strategies and materials that suppress both initial and later stage bacterial colonization are required in this context. Ideal would be the implementation of a bactericidal functionality in the implants that is temporally and spatially triggered in an autonomous fashion at the infection site. Herein, the fabrication and validation of functional titanium-based implants with triggered antibiotic release function afforded via an intelligent polymer coating is reported. In particular, thermo-responsive poly(di(ethylene glycol) methyl ether methacrylate) (PDEGMA) brushes on titanium implants synthesized via a surface-initiated atom transfer radical polymerization with activators regenerated through the electron transfer technique (ARGET ATRP) allows for a controlled and thermally triggered release of the antibiotic levofloxacin at the wound site. Antibiotic loaded brushes are investigated as a function of thickness, loading capacity for antibiotics, and temperature. At temperatures of the infection site >37 °C the lower critical solution temperature behavior of the brushes afforded the triggered release. Hence, in addition to the known antifouling effects, the PDEGMA coating ensured enhanced bactericidal effects, as demonstrated in initial in vivo tests with rodents infected with Staphylococcus aureus.
Assuntos
Polímeros , Titânio , Biofilmes , Liberação Controlada de Fármacos , MetacrilatosRESUMO
PURPOSE: The utility of total hip arthroplasty (THA) for the treatment of displaced femoral neck fractures in elderly patients (≥80 years of age) remains controversial as a patient's general condition is an essential factor impacting recovery. This study aims to determine if THA is a valuable option for appropriately selected elderly patients. MATERIALS AND METHODS: All patients underwent cementless THA using a direct lateral approach with a rectangular stem. Eighty-two patients ≥80 years of age underwent THA due to a displaced femoral neck. Clinical frailty scale (CFS) scores <5 were indicated for THA. The modified Harris hip score (mHHS), visual analogue scale (VAS), and patient satisfaction were used to assess outcomes. RESULTS: Nine of 82 patients died in the study period with another underlying disease. One, a 90-year-old male with pneumonia expired in the intensive care unit at 7-day postoperatively, while the other eight died due to causes unrelated to THA. Of the remaining 73 patients: (i) mean mHHS score increased to 80.57±21.36 at 1-year postoperatively; (ii) VAS was 2.3±0.9 points six-months postoperatively; and (iii) 78.7% of patients reported that they were very satisfied or satisfied 1-year postoperatively. The number of perioperative complications was 10.8% (9 hips) without the need for revision surgery. CONCLUSION: The use of THA in patients ≥80 years of age with low CFS scores (<5) described here yielded favorable results and a relatively low rate of complications. However, a well-controlled comparative study or randomized trial is required to further refine selection criteria for THA in this patient population.
RESUMO
PURPOSE: Hip arthroscopy has been considered for treating hip dysplasia; however, its efficacy is still a matter of controversy. Here, we report outcomes of patients with borderline dysplasia treated with a contemporary hip arthroscopy technique. MATERIALS AND METHODS: Forty-seven hips with borderline hip dysplasia were treated using hip arthroscopy. Patients underwent procedures to correct torn labrums or ligamentum teres with additional procedure on the acetabular capsule. Patient outcomes were assessed using visual analogue scale (VAS), modified Harris Hip Score (mHHS), Nonarthritic Hip Score (NAHS) and patient satisfaction. Risk factors for poor prognosis were also investigated. RESULTS: The mean follow up period was 25.9 months. At the last follow up, mean VAS score decreased from 6.1±1.6 to 3.5±2.8 (P=0.016). The mHHS and NHAS at the last follow up improved from 61.0±7.6 to 78.6±19.5 (P=0.001) and 62.1±7.5 to 80.0±18.5 (P=0.002), respectively. While significant improvement was observed in all patient reported outcome measures tested, 19 (40.4%) hips indicated that "the operation was unsatisfactory." The only factor shown to influence outcomes was preoperative VAS (i.e., worse scores potentially an indicator of poor outcomes). CONCLUSION: The results of the current study indicate that arthroscopic management may be beneficial for a subset of patients with borderline dysplasia; however, the dissatisfaction rate associated with this treatment approach may be as high as 40%. The poor preoperative pain score appears to be the sole indicator for poor outcomes.
RESUMO
When spine-pelvic motion is normally coordinated, the pelvis may tilt posteriorly and acetabular anteversion may increase as the patient's position changes from standing to sitting; this scenario allows for improved clearance of the femoral head and neck during hip flexion. However, changes in the mobility of the spine and pelvis may result in impingement after total hip arthroplasty (THA), with the most obvious complication being dislocation. Understanding the spinal-pelvic relationship in the sagittal plane is essential for planning THA in patients with spinal fusion or a known spine disease. Careful attention should be payed to the cup position when performing THA on patients with an increased risk of dynamic impingement.
RESUMO
INTRODUCTION: The treatment of tendinosis of elbow can be challenging, yet rewarding. Nevertheless, for the patients who failed conservative management and develop persistent recalcitrant symptoms, surgical intervention should be considered. The hypothesis of this study is iliac bone marrow plasma injection after arthroscopic debridement of degenerative tissue will bring along biological cure. Thus, it will not only reduce pain but also improve function in patients with resistant elbow tendonitis. MATERIALS AND METHODS: Twenty-four patients (26 elbows) with significant persistent pain for a mean of 15 months, despite of standard rehabilitation protocol and a variety of other nonsurgical modalities were treated arthroscopically. We applied autologous iliac bone marrow plasma injection following arthroscopic debridement. This material is produced by centrifugation of iliac bone marrow blood at 1,800 rpm for 20 to 30 minutes. Patients were allowed full range of motion (ROM) exercise after 2 to 3 days. Cytokine analyses for this injective material were done. Outcome was rated by postoperative sonography, visual analog pain scores (VAS) and Mayo elbow performance scores (MEPS) at 8 weeks and 6 months follow-up. Informed consent had been obtained from the subjects, and the study protocol was approved by the ethics committee of Chosun University Hospital, Korea. RESULTS: All patients in this study noted improvement both in their VAS and MEPS. No complication occurred in any patient. Evidence of tendon healing was observed in postoperative sonographic examination. Predominant cytokines of this study were interleukin-12 (IL-12), interferon-gamma-inducible protein-10 (IP-10) and RANTES. CONCLUSION: Biologic treatments in orthopaedics are just beginning to evolve. In the present investigation, the injection of iliac bone marrow plasma after arthroscopic debridement in severe elbow tendinosis demonstrated early recovery of daily activities and clear improvement.