RESUMO
PURPOSE: This study aimed to test the feasibility of using Small Angle X-ray Scattering (SAXS) coupled with Density from Solution Scattering (DENSS) algorithm to characterize the internal architecture of messenger RNA-containing lipid nanoparticles (mRNA-LNPs). METHODS: The DENSS algorithm was employed to construct a three-dimensional model of average individual mRNA-LNP. The reconstructed models were cross validated with cryogenic transmission electron microscopy (cryo-TEM), and dynamic light scattering (DLS) to assess size, morphology, and internal structure. RESULTS: Cryo-TEM and DLS complemented SAXS, revealed a core-shell mRNA-LNP structure with electron-rich mRNA-rich region at the core, surrounded by lipids. The reconstructed model, utilizing the DENSS algorithm, effectively distinguishes mRNA and lipids via electron density mapping. Notably, DENSS accurately models the morphology of the mRNA-LNPs as an ellipsoidal shape with a "bleb" architecture or a two-compartment structure with contrasting electron densities, corresponding to mRNA-filled and empty lipid compartments, respectively. Finally, subtle changes in the LNP structure after three freeze-thaw cycles were detected by SAXS, demonstrating an increase in radius of gyration (Rg) associated with mRNA leakage. CONCLUSION: Analyzing SAXS profiles based on DENSS algorithm to yield a reconstructed electron density based three-dimensional model can be a useful physicochemical characterization method in the toolbox to study mRNA-LNPs and facilitate their development.
Assuntos
Elétrons , Lipossomos , Nanopartículas , Raios X , Espalhamento a Baixo Ângulo , RNA Mensageiro/química , Difração de Raios X , Nanopartículas/química , Lipídeos/química , RNA Interferente Pequeno/químicaRESUMO
Understanding protein-protein interactions and formation of reversible oligomers (clusters) in concentrated monoclonal antibody (mAb) solutions is necessary for designing stable, low viscosity (η) concentrated formulations for processing and subcutaneous injection. Here we characterize the strength (K) of short-range anisotropic attractions (SRA) for 75-200 mg/mL mAb2 solutions at different pH and cosolute conditions by analyzing structure factors (Seff(q)) from small-angle X-ray scattering (SAXS) using coarse-grained molecular dynamics simulations. Best fit simulations additionally provide cluster size distributions, fractal dimensions, cluster occluded volume, and mAb coordination numbers. These equilibrium properties are utilized in a model to account for increases in viscosity caused by occluded volume in the clusters (packing effects) and dissipation of stress across lubricated fractal clusters. Seff(q) is highly sensitive to K at 75 mg/mL where mAbs can mutually align to form SRA contacts but becomes less sensitive at 200 mg/mL as steric repulsion due to packing becomes dominant. In contrast, η at 200 mg/mL is highly sensitive to SRA and the average cluster size from SAXS/simulation, which is observed to track the cluster relaxation time from shear thinning. By analyzing the distribution of sub-bead hot spots on the 3D mAb surface, we identify a strongly attractive hydrophobic patch in the complementarity determining region (CDR) at pH 4.5 that contributes to the high K and consequently large cluster sizes and high η. Adding NaCl screens electrostatic interactions and increases the impact of hydrophobic attraction on cluster size and raises η, whereas nonspecific binding of Arg attenuates all SRA, reducing η. The hydrophobic patch is absent at higher pH values, leading to smaller K, smaller clusters, and lower η. This work constitutes a first attempt to use SAXS and CG modeling to link both structural and rheological properties of concentrated mAb solutions to the energetics of specific hydrophobic patches on mAb surfaces. As such, our work opens an avenue for future research, including the possibility of designing coarse-grained models with physically meaningful interacting hot spots.
Assuntos
Anticorpos Monoclonais , Simulação de Dinâmica Molecular , Anticorpos Monoclonais/química , Espalhamento a Baixo Ângulo , Viscosidade , Raios X , Difração de Raios XRESUMO
The effects of a subclass of monoclonal antibodies (mAbs) on protein-protein interactions, formation of reversible oligomers (clusters), and viscosity (η) are not well understood at high concentrations. Herein, we quantify a short-range anisotropic attraction between the complementarity-determining region (CDR) and CH3 domains (KCDR-CH3) for vedolizumab IgG1, IgG2, or IgG4 subclasses by fitting small-angle X-ray scattering (SAXS) structure factor Seff(q) data with an extensive library of 12-bead coarse-grained (CG) molecular dynamics simulations. The KCDR-CH3 bead attraction strength was isolated from the strength of long-range electrostatic repulsion for the full mAb, which was determined from the theoretical net charge and a scaling parameter ψ to account for solvent accessibility and ion pairing. At low ionic strength (IS), the strongest short-range attraction (KCDR-CH3) and consequently the largest clusters and highest η were observed with IgG1, the subclass with the most positively charged CH3 domain. Furthermore, the trend in KCDR-CH3 with the subclass followed the electrostatic interaction energy between the CDR and CH3 regions calculated with the BioLuminate software using the 3D mAb structure and molecular interaction potentials. Whereas the equilibrium cluster size distributions and fractal dimensions were determined from fits of SAXS with the MD simulations, the degree of cluster rigidity under flow was estimated from the experimental η with a phenomenological model. For the systems with the largest clusters, especially IgG1, the inefficient packing of mAbs in the clusters played the largest role in increasing η, whereas for other systems, the relative contribution from stress produced by the clusters was more significant. The ability to relate η to short-range attraction from SAXS measurements at high concentrations and to theoretical characterization of electrostatic patches on the 3D surface is not only of fundamental interest but also of practical value for mAb discovery, processing, formulation, and subcutaneous delivery.
Assuntos
Anticorpos Monoclonais , Imunoglobulina G , Anticorpos Monoclonais/química , Espalhamento a Baixo Ângulo , Viscosidade , Difração de Raios X , Imunoglobulina G/químicaRESUMO
The rapid development of unconventional oil and gas resources presents challenges for foam flooding for reservoirs with high salinity and high heterogeneity at elevated temperatures. In this study, hydrophilic anionic sulfonate-modified nanoparticles (NPs) exhibited a synergistic effect with a cationic surfactant in stabilizing N2/water foam in the presence of concentrated divalent ions from ambient temperature up to 70 °C. With low concentrations of both the sulfonated NPs (SNPs) and cationic surfactant, the foams remained stable for 4 days at 50 °C and atmospheric pressure, while the surfactant-stabilized foams collapsed completely in 1 day. This stability mechanism of foams by the SNPs and cationic surfactant is described in terms of phase behavior, bulk shear rheology of the aqueous phase, and the dilational modulus of the gas-brine interface. The high surface elastic dilational modulus E' observed upon addition of the SNP provided stability against coarsening according to the Gibbs criteria. The cryo-SEM images also showed the compact bubble structure of foams provided by the SNPs. Consequently, very minor changes in the foam bubble size were observed at 208 bar (3000 psi) and 50 °C for up to 48 h with only 0.1 wt % or 0.3 wt % SNPs and 0.01 wt % Arquad 12-50, indicating excellent foam stability. The ability of the surfactant and NPs to stabilize foams at low concentrations broadens the application of foams in subsurface reservoirs at high temperatures and salinities.
RESUMO
Interfacial evaporation using porous hydrogels has demonstrated highly effective solar evaporation performance under natural sunlight to ensure an affordable clean water supply. However, it remains challenging to realize scalable and ready-to-use hydrogel materials with durable mechanical properties. Here, self-assembled templating (SAT) is developed as a simple yet effective method to fabricate large-scale elastic hydrogel evaporators with excellent desalination performance. The highly interconnected porous structure of the hydrogels with low tortuosity and tunable pore size enables high level of tunability on the water transport rate. With superior elasticity, the porous hydrogels are easy to process with a rapid shape recovery after being rolled, folded, and twisted over hundred times, and exhibit highly effective and stable evaporation with an evaporation rate of ≈2.8â kg m-2 h-1 and ≈90 % solar-to-vapor efficiency. It is anticipated that this SAT strategy, without the typical need for freeze-drying, will accelerate the industrialization of hydrogel solar evaporators for practical applications.
RESUMO
Interfacial solar vapor generation (SVG) is regarded as a promising and sustainable strategy for clean water production. While many materials have demonstrated excellent evaporation rates under one sun, it remains challenging to design solar evaporators without compromising SVG performance in high-salinity brines (≥10â wt %). Herein, polyzwitterionic hydrogels (PZHs) are proposed as a novel platform for high-salinity solar desalination. Taking advantage of the unique anti-polyelectrolyte effects, PZHs can trap salt ions from the brine water to form a more hydrated polymer network, leading to enhanced SVG performance. PZHs exhibit an exceptional solar evaporation rate of 4.14â kg m-2 h-1 in 10â wt % brine, which is ≈20 % higher than that in pure water. It is anticipated that salt-responsive PZHs may provide insights for the design of next-generation solar desalination systems.
RESUMO
The relationship between the interfacial rheology of nanoparticle (NP) laden air-brine interfaces and NP adsorption and interparticle interactions is not well understood, particularly as a function of the surface chemistry and salinity. Herein, a nonionic ether diol on the surface of silica NPs provides steric stabilization in bulk brine and at the air-brine interface, whereas a second smaller underlying hydrophobic ligand raises the hydrophobicity to promote NP adsorption. The level of NPs adsorption at steady state is sufficient to produce an interface with a relatively strong elastic dilational modulus E' = dγ/d ln A. However, the interface is ductile with a relatively slow change in E' as the interfacial area is varied over a wide range during compression and expansion. In contrast, for silica NPs stabilized with only a single hydrophobic ligand, the interfaces are often more fragile and may fracture with small changes in area. The presence of concentrated divalent cations improves E' and ductility by screening electrostatic dipolar repulsion and strengthening the attractive forces between nanoparticles. The ability to tune the interfacial rheology with NP surface chemistry is of great interest for designing more stable gas/brine foams.
RESUMO
The design of surface chemistries on nanoparticles (NPs) to stabilize gas/brine foams with concentrated electrolytes, especially with divalent ions, has been elusive. Herein, we tune the surface of 20 nm silica NPs by grafting a hydrophilic and a hydrophobic ligand to achieve two seemingly contradictory goals of colloidal stability in brine and high NP adsorption to yield a viscoelastic gas-brine interface. Highly stable nitrogen/water (N2/brine) foams are formed with CaCl2 concentrations up to 2% from 25 to 90 °C. The viscoelastic gas-brine interface retards drainage of the lamellae, and the high dilational elasticity arrests coarsening (Ostwald ripening) with no observable change in foam bubble size over 48 h. The ability to design NP-laden viscoelastic interfaces for highly stable foams, even with high divalent ion concentrations, is of fundamental mechanistic interest for a broad range of foam applications and in particular foams for CO2 sequestration and enhanced oil recovery.
RESUMO
Understanding protein-protein interactions in concentrated therapeutic monoclonal antibody (mAb) solutions is desirable for improved drug discovery, processing, and administration. Here, we deduce both the net protein charge and the magnitude and geometry of short-ranged, anisotropic attractions of a mAb across multiple concentrations and cosolute conditions by comparing structure factors S(q) obtained from small-angle X-ray scattering experiments with those from molecular dynamics (MD) simulations. The simulations, which utilize coarse-grained 12-bead models exhibiting a uniform van der Waals attraction, uniform electrostatic repulsion, and short-range attractions between specific beads, are versatile enough to fit S(q) of a wide range of protein concentrations and ionic strength with the same charge on each bead and a single anisotropic short-range attraction strength. Cluster size distributions (CSDs) obtained from best fit simulations reveal that the experimental structure is consistent with small reversible oligomers in even low viscosity systems and help quantify the impact of these clusters on viscosity. The ability to systematically use experimental S(q) data together with MD simulations to discriminate between different possible protein-protein interactions, as well as to predict viscosities from protein CSDs, is beneficial for designing mAbs and developing formulation strategies that avoid high viscosities and aggregation at high concentration.
Assuntos
Anticorpos Monoclonais/química , Simulação de Dinâmica Molecular , Anisotropia , Soluções , Eletricidade Estática , ViscosidadeRESUMO
The dynamic behavior of monoclonal antibodies (mAbs) at high concentration provides insight into protein microstructure and protein-protein interactions (PPI) that influence solution viscosity and protein stability. At high concentration, interpretation of the collective-diffusion coefficient Dc, as determined by dynamic light scattering (DLS), is highly challenging given the complex hydrodynamics and PPI at close spacings. In contrast, self-diffusion of a tracer particle by Brownian motion is simpler to understand. Herein, we develop fluorescence correlation spectroscopy (FCS) for the measurement of the long-time self-diffusion of mAb2 over a wide range of concentrations and viscosities in multiple co-solute formulations with varying PPI. The normalized self-diffusion coefficient D0/Ds (equal to the microscopic relative viscosity ηeff/η0) was found to be smaller than η/η0. Smaller ratios of the microscopic to macroscopic viscosity (ηeff/η) are attributed to a combination of weaker PPI and less self-association. The interaction parameters extracted from fits of D0/Ds with a length scale dependent viscosity model agree with previous measurements of PPI by SLS and SAXS. Trends in the degree of self-association, estimated from ηeff/η with a microviscosity model, are consistent with oligomer sizes measured by SLS. Finally, measurements of collective diffusion and osmotic compressibility were combined with FCS data to demonstrate that the changes in self-diffusion between formulations are due primarily to changes in the protein-protein friction in these systems, and not to protein-solvent friction. Thus, FCS is a robust and accessible technique for measuring mAb self-diffusion, and, by extension, microviscosity, PPI and self-association that govern mAb solution dynamics.
Assuntos
Anticorpos Monoclonais/química , Fenômenos Biofísicos , Difusão , Fluorescência , Corantes Fluorescentes/química , Microscopia de Fluorescência , Modelos Químicos , Multimerização Proteica , Estabilidade Proteica , Soluções , ViscosidadeRESUMO
Perovskite oxides are active room-temperature bifunctional oxygen electrocatalysts in alkaline media, capable of performing the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with lower combined overpotentials relative to their precious metal counterparts. However, their semiconducting nature necessitates the use of activated carbons as conductive supports to generate applicably relevant current densities. In efforts to advance the performance and theory of oxide electrocatalysts, the chemical and physical properties of the oxide material often take precedence over contributions from the conductive additive. In this work, we find that carbon plays an important synergistic role in improving the performance of La1-xSrxCoO3-δ (0 ≤ x ≤ 1) electrocatalysts through the activation of O2 and spillover of radical oxygen intermediates, HO2- and O2-, which is further reduced through chemical decomposition of HO2- on the perovskite surface. Through a combination of thin-film rotating disk electrochemical characterization of the hydrogen peroxide intermediate reactions (hydrogen peroxide reduction reaction (HPRR), hydrogen peroxide oxidation reaction (HPOR)) and oxygen reduction reaction (ORR), surface chemical analysis, HR-TEM, and microkinetic modeling on La1-xSrxCoO3-δ (0 ≤ x ≤ 1)/carbon (with nitrogen and non-nitrogen doped carbons) composite electrocatalysts, we deconvolute the mechanistic aspects and contributions to reactivity of the oxide and carbon support.
RESUMO
Superparamagnetic nanoparticles with a high initial magnetic susceptibility χo are of great interest in a wide variety of chemical, biomedical, electronic, and subsurface energy applications. In order to achieve the theoretically predicted increase in χo with the cube of the magnetic diameter, new synthetic techniques are needed to control the crystal structure, particularly for magnetite nanoparticles larger than 10 nm. Aqueous magnetite dispersions (Fe3O4) with a χo of 3.3 (dimensionless SI units) at 1.9 vol %, over 3- to 5-fold greater than those reported previously, were produced in a one-pot synthesis at 210 °C and ambient pressure via thermal decomposition of Fe(II) acetate in triethylene glycol (TEG). The rapid nucleation and focused growth with an unusually high precursor-to-solvent molar ratio of 1:12 led to primary particles with a volume average diameter of 16 nm and low polydispersity according to TEM. The morphology was a mixture of stoichiometric and substoichiometric magnetite according to X-ray diffraction (XRD) and Mössbauer spectroscopy. The increase in χo with the cube of magnetic diameter as well as a saturation magnetization approaching the theoretical limit may be attributed to the highly crystalline structure and very small nonmagnetic layer (â¼1 nm) with disordered spin orientation on the surface.
RESUMO
PURPOSE: To explain the effects of the osmolyte proline on the protein-protein interactions (PPI), viscosity and stability of highly concentrated antibody solutions in contrast to other neutral osmolytes. METHODS: The viscosity of ~225 mg/mL mAb solutions was measured with proline, glycine and trehalose as a function of pH and co-solute concentration up to 1.3 M. The stability was assessed via turbidity as well as size exclusion chromatography after 4 weeks storage at 40°C. The PPI strength was assessed qualitatively via the high concentration diffusion rate by dynamic light scattering. RESULTS: Increasing proline significantly reduced the mAb viscosity and increased the colloidal stability at pH 6, but not at pH 5 further from the mAb pI. In contrast, glycine and trehalose did not improve the viscosity nor stability. The normalized diffusion coefficient at high concentration, which is inversely proportional to the attractive PPI strength, increased with proline concentration but decreased with increasing glycine. CONCLUSIONS: Proline demonstrated greater efficacy for improving mAb viscosity and stability in contrast to glycine and trehalose due to its amphipathic structure and partial charge on the pyrrolidine side chain. These properties likely allow proline to screen the attractive electrostatic and hydrophobic interactions that promote self-association and high viscosities. Binary proline-histidine formulations also demonstrated greater viscosity reduction effects than histidine alone at the same total co-solute concentration, while maintaining a lower total solution osmolarity.
Assuntos
Anticorpos Monoclonais/química , Química Farmacêutica/métodos , Prolina/química , Anticorpos Monoclonais/análise , Estabilidade de Medicamentos , Soluções Farmacêuticas/análise , Soluções Farmacêuticas/química , Prolina/análise , ViscosidadeRESUMO
Understanding protein stability is central to combatting protein aggregation diseases and developing new protein therapeutics. At the high concentrations often present in biological systems, purified proteins can exhibit undesirable high solution viscosities and poor solubilities mediated by short-range electrostatic and hydrophobic protein-protein interactions. The interplay between protein amino acid sequence, protein structure, and solvent conditions to minimize protein-protein interactions is key to designing well-behaved pharmaceutical proteins. However, theoretical approaches have yet to yield a general framework to address these problems. Here, we analyzed the high concentration behavior of superfolder GFP (sfGFP) and two supercharged sfGFP variants engineered to have formal charges of -18 or +15. Under low cosolute conditions, sfGFP and the -18 variant formed a gel or phase separated at â¼10 mg/mL. Under conditions that screen surface charges, including formulations with high histidine or high NaCl concentrations, all three variants attained concentrations up to 250 mg/mL with moderate viscosities. Moreover, all three variants exhibited very similar viscosity-concentration profiles over this range. This effect was not mimicked by high sugar concentrations that exert excluded-volume effects without shielding charge. Collectively, these data demonstrate that charge shielding neutralizes not only long-range electrostatic interactions but also, surprisingly, short-range electrostatic effects due to surface charge anisotropy. This work shows that supercharged sfGFP behavior under high ionic strength is largely determined by particle geometry, a conclusion that is supported by colloid models and may be applicable to pharmaceutically relevant proteins.
Assuntos
Proteínas de Fluorescência Verde/química , Agregação Patológica de Proteínas/prevenção & controle , Estabilidade Proteica , Anisotropia , Interações Hidrofóbicas e Hidrofílicas , Concentração Osmolar , Conformação Proteica , Solubilidade , Eletricidade Estática , ViscosidadeRESUMO
Reversible NIR-active nanoparticle clusters with controlled size from 20 to 100 nm were assembled from 5 nm gold nanoparticles (Au NP), with either citrate (CIT) or various binary ligands on the surface, by tuning the electrostatic repulsion and the hydrogen bonding via pH. The nanoclusters were bound together by vdW forces between the cores and the hydrogen bonds between the surface ligands and dissociated to primary nanoparticles over a period of 20 days at pH 5 and at pH 7. When high levels of citrate ligands were used on the primary particle surfaces, the large particle spacings in the nanoclusters led to only modest NIR extinction. However, a NIR extinction (E1000/525) ratio of up to â¼0.4 was obtained for nanoclusters with binary ligand mixtures composed of citrate and either cysteine (CYS), glutathione (GSH), or thioctic acid zwitterion (TAZ) while maintaining full reversibility to primary particles. The optimum ligand ratio for both an E1000/525 of â¼0.4 and full reversibility decreased with increasing length of the secondary ligand (1.5/1 for CYS/CIT, 0.75/1 for GSH/CIT, and 0.5/1 for TAZ/CIT) because a longer secondary ligand maintains a sufficient interparticle spacing required for dissociation more effectively. Interestingly, the zeta potential and the first-order rate constant for nanocluster dissociation were similar for all three systems at the optimum ligand ratios. After incubation in 10 mM GSH solution (intracellular concentration), only the TAZ/CIT primary nanoparticles were resistant to protein opsonization in 100% fetal bovine serum, as the bidentate binding and zwitterion tips of TAZ resisted GSH exchange and protein opsonization, respectively.
RESUMO
Nanoparticle (NP) clusters with diameters ranging from 20 to 100 nm are reversibly assembled from 5 nm gold (Au) primary particles coated with glutathione (GSH) in aqueous solution as a function of pH in the range of 5.4 to 3.8. As the pH is lowered, the GSH surface ligands become partially zwitterionic and form interparticle hydrogen bonds that drive the self-limited assembly of metastable clusters in <1 min. Whereas clusters up to 20 nm in size are stable against cluster-cluster aggregation for up to 1 day, clusters up to 80 nm in size can be stabilized over this period via the addition of citrate to the solution in equal molarity with GSH molecules. The cluster diameter may be cycled reversibly by tuning pH to manipulate the colloidal interactions; however, modest background cluster-cluster aggregation occurs during cycling. Cluster sizes can be stabilized for at least 1 month via the addition of PEG-thiol as a grafted steric stabilizer, where PEG-grafted clusters dissociate back to starting primary NPs at pH 7 in fewer than 3 days. Whereas the presence of excess citrate has little effect on the initial size of the metastable clusters, it is necessary for both the cycling and dissociation to mediate the GSH-GSH hydrogen bonds. In summary, these metastable clusters exhibit significant characteristics of equilibrium self-limited assembly between primary particles and clusters on time scales where cluster-cluster aggregation is not present.
RESUMO
PURPOSE: To explain the effects of cationic amino acids and other co-solutes on the viscosity, stability and protein-protein interactions (PPI) of highly concentrated (≥200 mg/ml) monoclonal antibody (mAb) solutions to advance subcutaneous injection. METHODS: The viscosities of ≥200 mg/ml mAb1 solutions with various co-solutes and pH were measured by capillary rheometry in some cases up to 70,000 s-1. The viscosities are analyzed in terms of dilute PPI characterized by diffusion interaction parameters (k D ) from dynamic light scattering (DLS). MAb stability was measured by turbidity and size exclusion chromatography (SEC) after 4 weeks of 40°C storage. RESULTS: Viscosity reductions were achieved by reducing the pH, or adding histidine, arginine, imidazole or camphorsulfonic acid, each of which contains a hydrophobic moiety. The addition of inorganic electrolytes or neutral osmolytes only weakly affected viscosity. Systems with reduced viscosities also tended to be Newtonian, while more viscous systems were shear thinning. CONCLUSIONS: Viscosity reduction down to 20 cP at 220 mg/ml mAb1 was achieved with co-solutes that are both charged and contain a hydrophobic interaction domain for sufficient binding to the protein surface. These reductions are related to the DLS diffusion interaction parameter, k D , only after normalization to remove the effect of charge screening. Shear rate profiles demonstrate that select co-solutes reduce protein network formation.
Assuntos
Aminoácidos/química , Anticorpos Monoclonais/química , Cátions/química , Difusão , Concentração de Íons de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Imunoglobulina G/química , Concentração Osmolar , Domínios e Motivos de Interação entre Proteínas , Estabilidade Proteica , Reologia , Soluções/química , ViscosidadeRESUMO
The static adsorption of C12-14E22, which is a highly ethoxylated nonionic surfactant, was studied on different minerals using high-performance liquid chromatography (HPLC) combined with an evaporative light scattering detector (ELSD). Of particular interest is the surfactant adsorption in the presence of CO2 because it can be used for foam flooding in enhanced oil recovery applications. The effects of the mineral type, impurities, salinity, and temperature were investigated. The adsorption of C12-14E22 on pure calcite was as low as 0.01 mg/m2 but higher on dolomite depending on the silica and clay content in the mineral. The adsorption remained unchanged when the experiments were performed using a brine solution or 0.101 MPa (1 atm) CO2, which indicates that electrostatic force is not the governing factor that drives the adsorption. The adsorption of C12-14E22 on silica may be due to hydrogen bonding between the oxygen in the ethoxy groups of the surfactant and the hydroxyl groups on the mineral surface. Additionally, thermal decomposition of the surfactant was severe at 80 °C but can be inhibited by operating in a reducing environment. Under reducing conditions, adsorption of C12-14E22 increased at higher temperatures.
RESUMO
For foams with ultra low water contents, the capillary pressure is very large and induces rapid drainage that destabilizes the aqueous lamellae between the gas bubbles. However, we show that high-pressure CO2-in-water foams can be stabilized with a viscoelastic aqueous phase composed of entangled wormlike micelles, even for extremely high CO2 volume fractions Ï of 0.95 to 0.98; the viscosity of these ultradry foams increased by up to 3-4-fold, reaching more than 100 cP relative to foams formed with conventional low viscosity aqueous phases. The foam morphology consisted of fine â¼20 µm polyhedral-shaped CO2 bubbles that were stable for hours. The wormlike micelles were formed by mixing anionic sodium lauryl ether sulfate (SLES) with salt and a protonated cationic surfactant, as shown by cryogenic transmission electron microscopy (cryo-TEM) and large values of the zero-shear viscosity and the dynamic storage and loss moduli. With the highly viscous continuous aqueous phases, the foam lamella drainage rates were low, as corroborated by confocal microscopy. The preservation of viscous thick lamellae resulted in lower rates of Ostwald ripening relative to conventional foams as shown by high-pressure optical microscopy. The ability to stabilize viscous ultra high internal phase foams is expected to find utility in various practical applications, including nearly "waterless" fracturing fluids for recovery of oil and gas in shale, offering the possibility of a massive reduction in the amount of wastewater.
RESUMO
The self-assembly of citrate-capped Au nanoparticles (5 nm) resulted in branched nanochains by adding CaCl2 versus spherical nanoclusters for NaCl. These assemblies were formed between 1 s to 30 min by tuning the electrostatic repulsion and the interparticle bridging attraction between the cations and citrate ligands as a function of electrolyte concentration. For dilute Ca(2+), strong interparticle bridging favored particle attachment at chain ends. This resulted in the formation of small, branched chains with lengths as short as 20 nm, due to the large Debye length for the diffuse counterions. Furthermore, the bridging produced very small interparticle spacings and sintering, as evident in high-resolution TEM despite the low temperature. This morphology produced a large red shift in the surface plasmon resonance, as characterized by a broad extinction peak with NIR absorption out to 1000 nm, which is unusual for such small particles. Whereas these properties were seen for primary particles with partial citrate monolayers, the degrees of sintering and NIR extinction were small in the case of citrate multilayers. The ability to design the size and shape of nanoparticle clusters as well as the interparticle spacing by tuning bridging and electrostatic interactions may be expected to be quite general and of broad applicability in materials synthesis.