Green Emissive Molybdenum Nanoclusters for Selective and Sensitive Detection of Hydroxyl Radical in Water Samples.

In this work, Cassia tora (C. tora) have been used as a template to synthesize green fluorescent C. tora molybdenum nanoclusters (C. tora-MoNCs) through a green chemistry approach. These C. tora-MoNCs showed a quantum yield (QY) of 7.72% and exhibited a significant emission peak at 498 nm when excited at 380 nm. The as-prepared C. tora-MoNCs had an average size of 3.48 ± 0.80 nm and showed different surface functionality. The as-synthesized C. tora-MoNCs were successfully identified the hydroxyl radical (•OH) via a fluorescence quenching mechanism. Also, fluorescence lifetime and Stern-Volmer proved that after the addition of •OH radicals it was quenched the fluorescence intensity via a static quenching mechanism. The limit of detection is 9.13 nM, and this approach was successfully utilized for sensing •OH radicals in water samples with a good recovery rate.

Green Synthetic Approach for the Preparation of Blue Emitting Gold Nanoclusters: A Simple Analytical Method for Detection of Hexaconazole Fungicide.

Blue emissive Argyreia nervosa-capped gold nanoclusters (A. nervosa-AuNCs) were synthesized via a simple environment-friendly method. The developed probe exhibits rapid response towards the target analyte (hexaconazole fungicide). Several characterizations, including FT-IR, UV-visible, fluorescence, HR-TEM, XPS, and fluorescence lifetime, were studied to confirm the formation of A. nervosa-AuNCs. The A. nervosa-AuNCs displayed emission and excitation peaks at 470 and 390 nm, respectively. Furthermore, the quantum yield (QY) of A. nervosa-AuNCs was 21.25%. The as-synthesized A. nervosa-AuNCs showed a good linear response with hexaconazole in the concentration range of 0.025-180 µM, with a detection limit (LOD) of 21.94 nM, indicating A. nervosa-AuNCs could be used as a sensitive and selective probe for detecting hexaconazole through a fluorescence "turn-off" mechanism. The A. nervosa-AuNCs were successfully used to detect hexaconazole in real samples. Moreover, A. nervosa-AuNCs were used as a bio-imaging probe for visualization of Saccharomyces cerevisiae cells.

Fluorescence 'turn-off-on' assays for neomycin sulphate and K+ ions with orange-red fluorescent molybdenum nanoclusters.

Fluorescent metal nanoclusters (MNCs) have found extensive application in recognizing molecular species. Here, orange-red fluorescent Arg-A. paniculata-MoNCs were synthesized using Andrographis paniculata leaf extract, arginine as a ligand, and MoCl5 as a metal precursor. The Arg-A. paniculata-MoNCs complex exhibited a quantum yield (QY) of 16.91% and excitation/emission wavelengths of 400/665 nm. The synthesized Arg-A. paniculata-MoNCs successfully acted as a probe for assaying neomycin sulphate (NS) via fluorescence turn-off and K+ ions via fluorescence turn-on mechanisms, respectively. Moreover, the developed probe was effectively used to develop a cellulose paper strip-based sensor for detection of NS and K+ ions. Arg-A. paniculata-MoNCs demonstrated great potential for sensing NS and K+ ions, with concentration ranges of 0.1-80 and 0.25-110 µM for NS and K+ ions, respectively. The as-synthesized Arg-A. paniculata-MoNCs efficiently detected NS and K+ ions in food and biofluid samples, respectively.

Zinc nitride quantum dots as an efficient probe for simultaneous fluorescence detection of Cu2+ and Mn2+ ions in water samples.

The exceptional ascending heights of graphene (carbon) and boron nitride nanostructures have invited scientists to explore metal nitride nanomaterials. Herein, Zn3N2 quantum dots (QDs) were prepared via a simple hydrothermal route from the reaction between zinc nitrate hexahydrate and ammonia solution that possess efficient strength towards sensing applications of metal ions (Cu2+ and Mn2+). The as-prepared Zn3N2 QDs show bright fluorescence, displaying an emission peak at 408 nm upon excitation at 320 nm, with a quantum yield (QY) of 29.56%. It was noticed that the fluorescence intensity of Zn3N2 QDs linearly decreases with the independent addition of Cu2+ and Mn2+ ions, displaying good linearity in the ranges 2.5-50 µM and 0.05-5 µM with detection limits of 21.77 nM and of 63.82 nM for Cu2+ and Mn2+ ions, respectively. The probe was successfully tested for quantifying Cu2+ and Mn2+ in real samples including river, canal, and tap water, providing good recoveries with a relative standard deviation < 2%. Furthermore, the masking proposition can successfully eliminate the interference if the two metal ions exist together. It was found that thiourea is efficiently able to mask Cu2+ and selectively quenches Mn2+, and L-cysteine is able to halt the quenching potential of Mn2+ and is selectively able to sense Cu2+. The Zn3N2 QDs provide a simple way for the simultaneous detection of both Cu2+ and Mn2+ ions in environmental samples at low sample preparations requirements.

Advances in Ultra-small Fluorescence Nanoprobes for Detection of Metal Ions, Drugs, Pesticides and Biomarkers.

Identification of trace level chemical species (drugs, pesticides, metal ions and biomarkers) plays key role in environmental monitoring. Recently, fluorescence assay has shown significant advances in detecting of trace level drugs, pesticides, metal ions and biomarkers in real samples. Ultra-small nanostructure materials (metal nanoclusters (NCs), quantum dots (QDs) and carbon dots (CDs)) have been integrated with fluorescence spectrometer for sensitive and selective analysis of trace level target analytes in various samples including environmental and biological samples. This review summarizes the properties of metal NCs and ligand chemistry for the fabrication of metal NCs. We also briefly summarized the synthetic routes for the preparation of QDs and CDs. Advances of ultra-small fluorescent nanosensors (NCs, QDs and CDs) for sensing of metal ions, drugs, pesticides and biomarkers in various sample matrices are briefly discussed. Additionally, we discuss the recent challenges and future perspectives of ultra-small materials as fluorescent sensors for assaying of wide variety of target analytes in real samples.

Synthesis of Greenish-Yellow Fluorescent Copper Nanocluster for the Selective and Sensitive Detection of Fipronil Pesticide in Vegetables and Grain Samples.

In this paper, a new synthetic route is introduced for the synthesis of high-luminescent greenish-yellow fluorescent copper nanoclusters (PVP@A. senna-Cu NCs) using Avaram senna (A. senna) and polyvinylpyrrolidone (PVP) as templates. A. senna plant extract mainly contains variety of phytochemicals including glycosides, sugars, saponins, phenols, and terpenoids that show good pharmacological activities such as anti-inflammatory, antioxidant, and antidiabetic. PVP is a stable and biocompatible polymer that is used as a stabilizing agent for the synthesis of PVP@A. senna-Cu NCs. The size, surface functionality, and element composition of the fabricated Cu NCs were confirmed by various analytical techniques. The as-prepared greenish-yellow fluorescent Cu NCs exhibit significant selectivity towards fipronil, thereby favoring to assay fipronil pesticide with good linearity in the range of 3.0-30 µM with a detection limit of 65.19 nM. More importantly, PVP@A. senna-Cu NCs are successfully applied to assay fipronil in vegetable and grain samples.

Development of Simple Fluorescence Analytical Strategy for the Detection of Triazophos Using Greenish-Yellow Emissive Carbon Dots Derived from Curcuma longa.

This study describes a new method for synthesizing water-soluble carbon dots (CDs) using "Curcuma longa" (green source) named CL-CDs via a single-step hydrothermal process. The as-synthesized CL-CDs exhibited greenish-yellow fluorescence at 548 nm upon excitation at 440 nm. It shows good water stability and exhibits a quantum yield of 19.4%. The developed probe is utilized for sensing triazophos (TZP) pesticide via a dynamic quenching mechanism, exhibiting favorable linearity ranging from 0.5-500 µM with a limit of detection of 0.0042 µM. The as-prepared CL-CDs probe was sensitive and selective towards TZP. Lastly, the successful application of the CL-CDs-based fluorescent probe in water and rice samples highlights its potential as a reliable and efficient method for the detection of TZP in various real sample matrices. Eventually, bioimaging and biocompatibility aspects of CL-CDs have been assessed on Saccharomyces cerevisiae (yeast) cell and lung cancer (A549) cell lines, respectively.

Development of Copper Nanoclusters-Based Turn-Off Nanosensor for Fluorescence Detection of Two Pyrethroid Pesticides (Cypermethrin and Lambda-Cyhalothrin).

Fluorescent copper nanoclusters (Cu NCs) were synthesized by using Withania somnifera (W. somnifera) plant extract as a biotemplate. Aqueous dispersion of W. somnifera-Cu NCs displays intense emission peak at 458 nm upon excitation at 350 nm. This fluorescence emission was utilized for the detection of two pyrethroid pesticides (cypermethrin and lambda-cyhalothrin) via "turn-off" mechanism. Upon the addition of two pyrethiod pesticides independently, the fluorescence emission of W. somnifera-Cu NCs was gradually decreased with increasing concentrations of both pesticides. It was noticed that the decrease in emission intensity at 458 nm was linearly dependent on the logarithm of both pesticides concentrations in the ranges of 0.01-100 µM and of 0.05-100 µM for cypermethrin and lambda-cyhalothrin, respectively. Consequently, the limits of detection were found to be 27.06 and 23.28 nM for cypermethrin and lambda-cyhalothrin, respectively. The as-fabricated W. somnifera-Cu NCs acted as a facile sensor for the analyses of cypermethrin and lambda-cyhalothrin in vegetables (tomato and bottle gourd), which demonstrates that it could be used as portable sensing platform for assaying of two pyrethroid pesticides in food samples.

Synthesis of gold and copper bimetallic nanoclusters with papain for fluorescence detection of cortisone in biological samples.

In this work, bimetallic gold and copper nanoclusters (Au-Cu NCs) were fabricated by using papain as a ligand. The as-synthesized papain-Au-Cu NCs displayed red fluorescence at 365 nm of UV lamp. The as-prepared papain-Au-Cu NCs display a strong fluorescence at 656 nm when excited at 390 nm. Papain encapsulated Au-Cu NCs exhibit distinct interaction site towards cortisone, which results red fluorescence "turn-off". Papain-Au-Cu NCs exhibited a rapid response and remarkable fluorescence quenching with the addition of cortisone as a biomarker. The developed probe is demonstrated for the quantification of cortisone by plotting the calibration graph between the fluorescence ratio (I0/I) and cortisone concentration (0.031-1.00 µM) with an impressive detection limit of 1.89 nM. Interestingly, the response of papain-Au-Cu NCs towards other biomarkers and common interfering species is quite silent, signifying the selectivity of papain-Au-Cu NCs for the detection of cortisone. The probe was successfully applied to assay cortisone biomarker in urine and plasma samples. More importantly, the analytical validation of the probe was assessed by assaying cortisone in intra- and inter-day, demonstrating papain-Au-Cu NCs could serve as promising probe for the rapid detection of cortisone in biological samples.

Synthesis of multicolor silver nanostructures for colorimetric sensing of metal ions (Cr3+, Hg2+ and K+) in industrial water and urine samples with different spectral characteristics.

In this work, we have synthesized four different color (yellow, orange, green, and blue (multicolor)) silver nanostructures (AgNSs) by chemical reduction method where silver nitrate, sodium borohydride and hydrogen peroxide were used as reagents. The as-synthesized multicolor AgNSs were successfully functionalized with bovine serum albumin (BSA) and applied as a colorimetric sensor for the assaying of metal cations (Cr3+, Hg2+, and K+). The addition of metal ions (Cr3+, Hg2+, and K+) into BSA functionalized AgNSs (BSA-AgNSs) causes the aggregation of BSA-AgNSs, and are accompanied by visual color changes with red or blue shift in the surface plasmon resonance (SPR) band of BSA-AgNSs. The BSA-AgNSs show different SPR characteristic for each metal ions (Cr3+, Hg2+, and K+) with exhibiting different spectral shift and color change. The yellow color BSA-AgNSs (Y-BSA-AgNSs) act as a probe for sensing Cr3+, orange color BSA-AgNSs (O-BSA-AgNSs) act as probe for Hg2+ ion assay, green color BSA-AgNSs (G-BSA-AgNSs) act as a probe for the assaying of both K+ and Hg2+, and blue color BSA-AgNSs (B-BSA-AgNSs) act as a sensor for colorimetric detection of K+ ion. The detection limits were found to be 0.26 µM for Cr3+ (Y-BSA-AgNSs), 0.14 µM for Hg2+ (O-BSA-AgNSs), 0.05 µM for K+ (G-BSA-AgNSs), 0.17 µM for Hg2+ (G-BSA-AgNSs), and 0.08 µM for K+ (B-BSA-AgNSs), respectively. Furthermore, multicolor BSA-AgNSs were also applied for assaying of Cr3+, and Hg2+ in industrial water samples and K+ in urine sample.

Recent advances in nanomaterials-based optical sensors for detection of various biomarkers (inorganic species, organic and biomolecules).

This review briefly emphasizes the different detection approaches (electrochemical sensors, chemiluminescence, surface-enhanced Raman scattering), functional nanostructure materials (quantum dots, metal nanoparticles, metal nanoclusters, magnetic nanomaterials, metal oxide nanoparticles, polymer-based nanomaterials, and carbonaceous nanomaterials) and detection mechanisms. Furthermore, the emphasis of this review is on the integration of functional nanomaterials with optical spectroscopic techniques for the identification of various biomarkers (nucleic acids, glucose, uric acid, oxytocin, dopamine, ascorbic acid, bilirubin, spermine, serotonin, thiocyanate, Pb2+ , Cu2+ , Hg2+ , F- , peptides), and cancer biomarkers (mucin 1, prostate specific antigen, carcinoembryonic antigen, CA15-3, human epidermal growth factor receptor 2, C-reactive protein, and interleukin-6). Analytical characteristics of nanomaterials-based optical sensors are summarized in the tables, providing the insights of nanomaterials-based optical sensors for biomarkers detection. Finally, the opportunities and challenges of nanomaterials-based optical analytical approaches for the detection of various biomarkers (inorganic, organic, biomolecules, peptides and proteins) are discussed.

Microwave-assisted synthesis of blue fluorescent molybdenum nanoclusters with maltose-cysteine Schiff base for detection of myoglobin and γ-aminobutyric acid in biofluids.

The fabrication of stable fluorescent MoNCs (molybdenum nanoclusters) in aqueous media is quite challenging as it is not much explored yet. Herein, we report a facile and efficient strategy for fabricating MoNCs using 2,3 dialdehyde maltose-cysteine Schiff base (DAM-cysteine) as a ligand for detecting myoglobin and γ-aminobutyric acid (GABA) in biofluids with high selectivity and sensitivity. The DAM-cysteine-MoNCs displayed fluorescence of bright blue color under a UV light at 365 nm with an emission peak at 444 nm after excitation at 370 nm. The synthesized DAM-cysteine-MoNCs were homogeneously distributed with a mean size of 2.01 ± 0.98 nm as confirmed by the high-resolution transmission electron microscopy (HR-TEM). Further, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) techniques were utilized to confirm the elemental oxidation states and surface functional groups of the DAM-cysteine-MoNCs. After the addition of myoglobin and GABA, the emission peak of DAM-cysteine-MoNCs at 444 nm was significantly quenched. This resulted in the development of a quantitative assay for the detection of myoglobin (0.1-0.5 µM) and GABA (0.125-2.5 µM) with the lower limit of detection as 56.48 and 112.75 nM for myoglobin and GABA, respectively.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes.

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Synthesis of copper nanoclusters from Bacopa monnieri leaves for fluorescence sensing of dichlorvos.

In this work, a facile one-step green synthesis was developed for the fabrication of blue fluorescent copper nanocluster (Brahmi-CuNCs) from the extract of Bacopa monnieri (common name is Brahmi) via a microwave method. The as-prepared Brahmi-CuNCs emitted blue fluorescence at 452 nm when excited at 352 nm and showed a quantum yield of 31.32%. Brahmi-derived blue fluorescent CuNCs acted as a probe for fluorescence sensing of dichlorvos. Upon the addition of dichlorvos, the blue emission for Brahmi-CuNCs was gradually turned off, favouring establishment of a calibration graph in the range 0.5-100 µM with a detection limit of 0.23 µM. The as-synthesized Brahmi-CuNCs exhibited marked sensitivity and selectivity towards dichlorvos, favourable for assaying dichlorvos in various samples (cabbage, apple juice, and rice).

Applications of upconversion nanoparticles in analytical and biomedical sciences: a review.

Lanthanide-doped upconversion nanoparticles (UCNPs) have gained more attention from researchers due to their unique properties of photon conversion from an excitation/incident wavelength to a more suitable emission wavelength at a designated site, thus improving the scope in the life sciences field. Due to their fascinating and unique optical properties, UCNPs offer attractive opportunities in theranostics for early diagnostics and treatment of deadly diseases such as cancer. Also, several efforts have been made on emerging approaches for the fabrication and surface functionalization of luminescent UCNPs in optical biosensing applications using various infrared excitation wavelengths. In this review, we discussed the recent advancements of UCNP-based analytical chemistry approaches for sensing and theranostics using a 980 nm laser as the excitation source. The key analytical merits of UNCP-integrated fluorescence analytical approaches for assaying a wide variety of target analytes are discussed. We have described the mechanisms of the upconversion (UC) process, and the application of surface-modified UCNPs for in vitro/in vivo bioimaging, photodynamic therapy (PDT), and photothermal therapy (PTT). Based on the latest scientific achievements, the advantages and disadvantages of UCNPs in biomedical and optical applications are also discussed to overcome the shortcomings and to improve the future study directions. This review delivers beneficial practical information of UCNPs in the past few years, and insights into their research in various fields are also discussed precisely.

An overview of molecular biology and nanotechnology based analytical methods for the detection of SARS-CoV-2: promising biotools for the rapid diagnosis of COVID-19.

Currently, the 2019 novel coronavirus (2019-nCoV) is drastically affecting 214 countries, causing severe pneumonia in patients, which has resulted in lockdown being implemented in several countries to stop its local transmission. Considering this, the rapid screening and accurate detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2; 2019-nCoV) play an essential role in the diagnosis of COVID-19, which can minimize local transmission and prevent an epidemic. Due to this public health emergency, the development of ultra-fast reliable diagnostic kits is essential for the diagnosis of COVID-19. Recently, molecular biology and nanotechnology based analytical methods have proven to be promising diagnostic tools for the rapid screening of 2019-nCoV with high accuracy and precision. The main aim of this review is to provide a retrospective overview on the molecular biology tools (reverse transcription polymerase chain reaction (RT-PCR) and reverse transcription loop-mediated isothermal amplification (RT-LAMP)) and nanotechnology based analytical tools (enzyme-linked immunosorbent assay (ELISA), RT-PCR, and lateral flow assay) for the rapid diagnosis of COVID-19. This review also presents recent reports on other analytical techniques including paper spray mass spectrometry for the diagnosis of COVID-19 in clinical samples. Finally, we provide a quick reference on molecular biology and nanotechnology based analytical tools for COVID-19 diagnosis in clinical samples.

Correction: Progress of electrospray ionization and rapid evaporative ionization mass spectrometric techniques for the broad-range identification of microorganisms.

Correction for 'Progress of electrospray ionization and rapid evaporative ionization mass spectrometric techniques for the broad-range identification of microorganisms' by Suresh Kumar Kailasa et al., Analyst, 2019, 144, 1073-1103, DOI: 10.1039/C8AN02034E.

Progress of electrospray ionization and rapid evaporative ionization mass spectrometric techniques for the broad-range identification of microorganisms.

Several non-culture molecular (multiplex polymerase chain reaction assays, DNA microarrays, massive parallel DNA sequencing, in situ hybridization, microbiome profiling, and molecular typing of pathogens) and analytical (electrophoresis, gel electrophoresis, surface-enhanced Raman scattering, and mass spectrometry) tools have been developed in recent years for the identification of bacteria and diagnosis of bacterial infections from clinical samples. Among mass spectrometric techniques, electrospray ionization (ESI) and rapid evaporative ionization (REI) mass spectrometric (MS) techniques have attracted much attention in the identification of microorganisms (bacteria, fungi, and viruses), and in the diagnosis of various bacterial infections. This review highlights the developed ESI-MS-based methods, including polymerase chain reaction (PCR) combined with ESI-MS and capillary electrophoresis (CE) and liquid chromatography (LC)-ESI-MS, for the identification of microorganisms (pathogenic bacteria, fungi, and viruses) in various samples. Recent applications of ESI- and REI-MS in identifying pathogenic bacteria are depicted in tables, and some significant findings are summarized.

Drug-Induced Micelle-to-Vesicle Transition of a Cationic Gemini Surfactant: Potential Applications in Drug Delivery.

An impetus for the sustained interest in the formation of vesicles is their potential application as efficient drug-delivery systems. A simple approach for ionic surfactants is to add a vesicle-inducing drug of opposite charge. In ionic gemini surfactants (GSs) two molecules are covalently linked by a spacer. Regarding drug delivery, GSs are more attractive candidates than their single-chain counterparts because of their high surface activity and the effect on the physicochemical properties of their solutions caused by changing the length of the spacer and inclusion of heteroatoms therein. Herein, the effect of the (anionic) anti-inflammatory drug diclofenac sodium (DS) on the morphology of aqueous micellar aggregates of gemini surfactant hexamethylene-1,6-bis (dodecyldimethylammonium) dibromide (12-6-12) at 25 °C is reported. Several independent techniques are used to demonstrate drug-induced micelle-to-vesicle transition. These include UV/Vis spectrophotometry, dynamic light scattering, TEM, and small-angle neutron scattering. The micelles are transformed into vesicles with increasing [DS]/[12-6-12] molar ratio; precipitation of the catanionic (DS-GS) complex then occurred, followed by partial resuspension of the weakly anionic precipitate. The stability of some of the prepared vesicles at human body temperature shows their potential use in drug delivery.

Tuning of gold nanoclusters sensing applications with bovine serum albumin and bromelain for detection of Hg2+ ion and lambda-cyhalothrin via fluorescence turn-off and on mechanisms.

Herein, fluorescent gold nanoclusters (Au NCs) were obtained by one-pot synthetic method using bovine serum albumin (BSA) and bromelain as templates. As-synthesized fluorescent Au NCs were stable and showed bright red fluorescence under UV lamp at 365 nm. The fluorescent Au NCs exhibit the emission intensity at 648 nm when excited at 498 nm. Various techniques were used such as spectroscopy (UV-visible, fluorescence, and Fourier-transform infrared), high-resolution transmission electron microscopy, and dynamic light scattering for the characterization of fluorescent Au NCs. The values of I0/I at 648 nm are proportional to the concentrations of Hg2+ ion in the range from 0.00075 to 5.0 µM and of lambda-cyhalothrin in the range from 0.01 to 10 µM with detection limits of 0.0003 and 0.0075 µM for Hg2+ ion and lambda-cyhalothrin, respectively. The practical application of the probe was successfully demonstrated by analyzing Hg2+ ion and lambda-cyhalothrin in water samples. In addition, Au NCs used as probes for imaging of Simplicillium fungal cells. These results indicated that the as-synthesized Au NCs have proven to be promising fluorescent material for the sensing of Hg2+ ion and lambda-cyhalothrin in environmental and for imaging of microorganism cells in biomedical applications.