Aggregation-induced fluorescent response of urea-bearing polyphenyleneethynylenes toward anion sensing.

A π-conjugated urea-bearing phenyleneethynylene polymer (Poly-2) was rationally designed by the Sonogashira coupling condensation reaction and had been demonstrated to have a unique fluorescent quenching effect for the optical detection of all determined anions, especially for CN-. The fluorescent emission of Poly-2 was significantly quenched upon adding CN-, together accompanied with a continuous red shift of the emission peak from 442 to 464 nm with the cyanide concentration increased from 0 to 1.0 mM. On the contrary, its precursor polymer, Poly-1, itself also displayed fluorescent responsibility with all selected anions but had no obvious selectivity and tendency. For instance, the addition of highly basic CN-, N3 -, AcO-, or F- to Poly-1 solution in DMF/H2O (v/v = 1:1) led to the photoluminescence amplification, while the addition of weakly basic anions like Cl-, I-, and Br- showed a fluorescence quenching effect. Both polymers were in a seriously self-aggregated state in solution no matter in the absence or presence of an anion. Interestingly, it was found that Poly-2 exhibited an aggregation-induced emission behavior, while Poly-1 had an aggregation-caused quenching effect, based on the relationship between photoluminescence and polymer aggregation state. The structural characterizations were carried out by NMR spectroscopy and size exclusion chromatography measurements; the photoluminescence properties of Poly-1 and Poly-2 together with anion sensing properties were followed by fluorescence spectroscopy, and the relationship between photoluminescence and aggregation behavior of both polymers in solution was investigated by dynamic light scattering measurements.

Synthesis and characterization of phenylboronic acid-containing polymer for glucose-triggered drug delivery.

Thermo-, pH- and glucose-responsive polymeric nanoparticles are of great interest in developing a self-regulated drug delivery system. The novel core-shell nanoparticles were synthesized by self-assembly of a phenylboronic acid-based block copolymer poly-(N-isopropylacrylamide)-block-poly(3-acrylamidophenylboronic acid) (PNIPAM136-b-PAPBA16) and a fluorescent complex glucosamine-poly(N-isopropylacrylamide)/Eu(III) (GA-PNIPAM)/Eu(III) based on the cross-linking between PBA- and GA-containing blocks in this work. The nanoparticles can be tuned via thermo-induced collapse or glucose-induced swelling at appropriate pH and temperatures; they had an average kinetic radius was about 80nm, and which showed excellent fluorescence. MTT assays revealed the nanocarriers had no significant cytotoxic response of the micelle when it was observed in the cell line over the concentration range from 0.1 to 1000 µg/ml at any exposure times.

Organocatalyzed Group Transfer Polymerization.

In contrast to the conventional group transfer polymerization (GTP) using a catalyst of either an anionic nucleophile or a transition-metal compound, the organocatalyzed GTP has to a great extent improved the living characteristics of the polymerization from the viewpoints of synthesizing structurally well-defined acrylic polymers and constructing defect-free polymer architectures. In this article, we describe the organocatalyzed GTP from a relatively personal perspective to provide our colleagues with a perspicuous and systematic overview on its recent progress as well as a reply to the curiosity of how excellently the organocatalysts have performed in this field. The stated perspectives of this review mainly cover five aspects, in terms of the assessment of the livingness of the polymerization, limit and scope of applicable monomers, mechanistic studies, control of the polymer structure, and a new GTP methodology involving the use of tris(pentafluorophenyl)borane and hydrosilane.

Influence of Helical Structure on Chiral Recognition of Poly(phenylacetylene)s Bearing Phenylcarbamate Residues of L-Phenylglycinol and Amide Linage as Pendants.

Four poly(phenylacetylene)s (PPA-1~4) bearing phenylcarbamate residues of L-phenylglycinol and amide linkage as pendants were prepared to be used as chiral stationary phases (CSPs) for high-performance liquid chromatography (HPLC), and the influences of coating solvents, dimethylformamide (DMF) and tetrahydrofuran (THF), which were used for coating the polymers on silica gel, on the helical structure of the polymers and their chiral recognition abilities were investigated. The structure analysis of PPA-1~4 by (1) H nuclear magnetic resonance (NMR), size exclusion chromatography (SEC), optical rotation, and circular dichroism (CD) spectra indicated that the polymers possess the cis-transoidal structure with dynamic helical conformation. The polymers in THF seem to have shorter conjugated helical main chains along with a tighter twist conformation than those in DMF. The chiral recognition abilities of PPA-1~4 with the different helical structures induced by the coating solvents were evaluated as the CSPs in HPLC. The helical structures of PPA-1~4 induced with THF are preferable for chiral recognition for some racemates compared to those induced with DMF, and higher chiral recognition abilities of PPA-1~ were achieved using THF.

All-Atom Molecular Dynamics Simulations of the Temperature Response of Poly(glycidyl ether)s with Oligooxyethylene Side Chains Terminated with Alkyl Groups.

Recently, experimental investigations of a class of temperature-responsive polymers tethered to oligooxyethylene side chains terminated with alkyl groups have been conducted. In this study, aqueous solutions of poly(glycidyl ether)s (PGE) with varying numbers of oxyethylene units, poly(methyl(oligooxyethylene)n glycidyl ether) (poly(Me(EO)nGE)), and poly(ethyl(oligooxyethylene)n glycidyl ether) (poly(Et(EO)nGE) (n = 0, 1, and 2) were investigated by all-atom molecular dynamics simulations, focusing on the thermal responses of their chain extensions, the recombination of intrapolymer and polymer-water hydrogen bonds, and water-solvation shells around the alkyl groups. No clear relationship was established between the phase-transition temperature and the polymer-chain extensions unlike the case for the coil-globule transition of poly(N-isopropylacrylamide). However, the temperature response of the first water-solvation shell around the alkyl group exhibited a notable correlation with the phase-transition temperature. In addition, the temperature at which the hydrophobic hydration shell strength around the terminal alkyl group equals the bulk water density (TCRP) was slightly lower than the cloud point temperature (TCLP) for the methyl-terminated poly(Me(EO)nGE) and slightly higher for the ethyl-terminated poly(Et(EO)nGE). It was concluded that the polymer-chain fluctuation affects the relationship between TCRP and TCLP.

Thermoresponsive Property of Poly(N,N-bis(2-methoxyethyl)acrylamide) and Its Copolymers with Water-Soluble Poly(N,N-disubstituted acrylamide) Prepared Using Hydrosilylation-Promoted Group Transfer Polymerization.

The group-transfer polymerization (GTP) of N,N-bis(2-methoxyethyl)acrylamide (MOEAm) initiated by Me2EtSiH in the hydrosilylation-promoted method and by silylketene acetal (SKA) in the conventional method proceeded in a controlled/living manner to provide poly(N,N-bis(2-methoxyethyl)acrylamide) (PMOEAm) and PMOEAm with the SKA residue at the α-chain end (MCIP-PMOEAm), respectively. PMOEAm-b-poly(N,N-dimethylacrylamide) (PDMAm) and PMOEAm-s-PDMAm and PMOEAm-b-poly(N,N-bis(2-ethoxyethyl)acrylamide) (PEOEAm) and PMOEAm-s-PEOEAm were synthesized by the block and random group-transfer copolymerization of MOEAm and N,N-dimethylacrylamide or N,N-bis(2-ethoxyethyl)acrylamide. The homo- and copolymer structures affected the thermoresponsive properties; the cloud point temperature (Tcp) increasing by decreasing the degree of polymerization (x). The chain-end group in PMOEAm affected the Tcp with PMOEAmx > MCIP-PMOEAmx. The Tcp of statistical copolymers was higher than that of block copolymers, with PMOEAmx-s-PDMAmy > PMOEAmx-b-PDMAmy and PMOEAmx-s-PEOEAmy > PMOEAmx-b-PEOEAmy.

Eu3+- and Tb3+-Based Coordination Complexes of Poly(N-Isopropyl,N-methylacrylamide-stat-N,N-dimethylacrylamide) Copolymer: Synthesis, Characterization and Property.

This contribution reports the syntheses, structural analyses and properties of europium (Eu3+)- and terbium (Tb3+)-based coordination complexes of poly(N-isopropyl,N-methylacrylamide-stat-N,N-dimethylacrylamide) (poly(iPMAm-stat-DMAm)) copolymer, named as poly-Eu(III) and poly-Tb(III), respectively. In greater detail, poly(iPMAm85-stat-DMAm15) is first prepared by random copolymerization of N-isopropyl,N-methylacrylamide (iPMAm) and N,N-dimethylacrylamide (DMAm) via group transfer polymerization (GTP). Next, poly(iPMAm85-stat-DMAm15) is used as the polymer matrix for chelating with Eu3+ and Tb3+ cations at its side amide groups, to produce poly-Eu(III) and poly-Tb(III). Their structural characterizations by FT-IR spectroscopy and XPS confirm the formation of polymeric complexes. The study on their fluorescence emission characteristics and luminescence lifetime demonstrates that Poly-Eu(III) shows four strong emission peaks at 578, 593, 622, and 651 nm, which are responsible for the electron transitions from the excited 5D0 state to the multiplet 7FJ (J = 0, 1, 2, 3) states, respectively, and poly-Tb(III) also displays four emission peaks at 489, 545, 588, and 654 nm, mainly due to the electron transitions of 5D4 → 7Fi (i = 6, 5, 4, 3). The luminescence lifetimes of poly-Eu(III) (τpoly-Eu(III)) and poly-Tb(III) (τpoly-Tb(III)) are determined to be 4.57 and 7.50 ms, respectively. In addition, in aqueous solutions, poly-Eu(III) and poly-Tb(III) are found to exhibit thermoresponsivity, with their cloud temperatures (Tcs) locating around 36.4 and 36.8 °C, respectively. Finally, the cytotoxicity study on the human colon carcinoma cells LoVo and DLD1 suggests that the luminescent Eu3+ and Tb3+ in the chelated state with poly(iPMAm-stat-DMAm) show much better biocompatibility and lower toxicity than their inorganic salts.

Thermo- and Light-Responsive Polymer-Coated Magnetic Nanoparticles as Potential Drug Carriers.

A series of thermo- and light-responsive copolymers of poly (N-isopropylacrylamide) (PNIPAM) and 6-[4-(4-methoxy phenyl azo)-phenoxyl-hexyl methacrylate) (AzoMA) (PNIPAM-b-PAzoMA) were synthesized via reversible addition-fragmentation chain transfer (RAFT) radical polymerization. The resulting copolymers had a narrow molecular weight distribution range of 1.06-1.24, in which M n changed regularly with the monomer concentration. Subsequently, the diblock copolymers were successfully modified on the surface of iron oxide nanoparticles through the interaction between the chemical bonds to prepare Fe3O4@(PNIPAM-b-PAzoMA) nanoparticles. The size of fabricated nanoparticles with excellent thermo-sensitivity and photo-sensitivity was controlled at about 40-50 nm. Cell viability assays suggested that the nanoparticles showed no significant cytotoxicity and potential drug delivery in the tumor microenvironment.

Synthesis, characterization, and lectin recognition of hyperbranched polysaccharide obtained from 1,6-anhydro-D-hexofuranose.

1,6-Anhydro-D-hexofuranoses, such as 1,6-anhydro-ß-D-glucofuranose (1), 1,6-anhydro-ß-D-mannofuranose (2), and 1,6-anhydro-α-D-galactofuranose (3), were polymerized using a thermally induced cationic catalyst in dry propylene carbonate to afford hyperbranched polysaccharides (poly1-3) with degrees of branching from 0.40 to 0.46. The weight-average molecular weights of poly1-3 measured by multiangle laser light scattering varied in the range from (1.02 to 5.84) × 10(4) g·mol(-1), which were significantly higher than those measured by size exclusion chromatography. The intrinsic viscosities ([η]) of poly1-3 were very low in the range from 4.9 to 7.4 mL·g(-1). The exponent (α) in the Mark-Houkwink-Sakurada equation ([η] = KM(α)) of the polymers was 0.20 to 0.33, which is <0.5. The steady shear flow of poly1-3 in an aqueous solution exhibited a Newtonian behavior with steady shear viscosities independent of the shear rate. These viscosity characteristics were attributed to the spherical structures of hyperbranched polysaccharides in an aqueous solution. Poly1-3 contained a high portion of terminal units of 31-43 mol % nonreducing D-hexopyranosyl and D-hexofuranosyl units, in which the D-hexofuranosyl units were 20-44 mol %. Moreover, poly1 and poly2 showed a strong interaction to Concanavalin A due to the cluster effect or multivalent effect of numerous nonreducing saccharide units on their surfaces with binding constants in the range from 1.7 × 10(4) to 2.7 × 10(5) M(-1).

Chemo-enzymatic synthesis of polyhydroxyalkanoate (PHA) incorporating 2-hydroxybutyrate by wild-type class I PHA synthase from Ralstonia eutropha.

A previously established improved two-phase reaction system has been applied to analyze the substrate specificities and polymerization activities of polyhydroxyalkanoate (PHA) synthases. We first analyzed the substrate specificity of propionate coenzyme A (CoA) transferase and found that 2-hydroxybutyrate (2HB) was converted into its CoA derivative. Then, the synthesis of PHA incorporating 2HB was achieved by a wild-type class I PHA synthase from Ralstonia eutropha. The PHA synthase stereoselectively polymerized (R)-2HB, and the maximal molar ratio of 2HB in the polymer was 9 mol%. The yields and the molecular weights of the products were decreased with the increase of the (R)-2HB concentration in the reaction mixture. The weight-average molecular weight of the polymer incorporating 9 mol% 2HB was 1.00 × 10(5), and a unimodal peak with polydispersity of 3.1 was observed in the GPC chart. Thermal properties of the polymer incorporating 9 mol% 2HB were analyzed by DSC and TG-DTA. T (g), T (m), and T (d) (10%) were observed at -1.1°C, 158.8°C, and 252.7°C, respectively. In general, major components of PHAs are 3-hydroxyalkanoates, and only engineered class II PHA synthases have been reported as enzymes having the ability to polymerize HA with the hydroxyl group at C2 position. Thus, this is the first report to demonstrate that wild-type class I PHA synthase was able to polymerize 2HB.

Precise Synthesis and Thermoresponsive Property of Poly(ethyl glycidyl ether) and Its Block and Statistic Copolymers with Poly(glycidol).

In this paper, we describe a comprehensive study of the thermoresponsive properties of statistic copolymers and multiblock copolymers synthesized by poly(glycidol)s (PG) and poly(ethyl glycidyl ether) (PEGE) with different copolymerization methods. These copolymers were first synthesized by ring-opening polymerization (ROP), which was initiated by tert-butylbenzyl alcohol (tBBA) and 1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris(dimethylamino)phosphoranylidenamino]-2Λ5,4Λ5-catenadi(phosphazene) (t-Bu-P4) as the catalyst, and then the inherent protective groups were removed to obtain the copolymers without any specific chain end groups. The thermoresponsive property of the statistic copolymer PGx-stat-PEGEy was compared with the diblock copolymer PGx-b-PEGEy, and the triblock copolymers were compared with the pentablock copolymers. Among them, PG-stat-PEGE, PG-b-PEGE-b-PG-b-PEGE-b-PG, and PEGE-b-PG-b-PEGE-b-PG-b-PEGE, and even the specific ratio of PEGE-b-PG-b-PEGE, exhibited LCST-type phase transitions in water, which were characterized by cloud point (Tcp). Although the ratio of x to y affected the value of the Tcp of PGx-stat-PEGEy, we found that the disorder of the copolymer has a decisive effect on the phase-transition behavior. The phase-transition behaviors of PG-b-PEGE, part of PEGE-b-PG-b-PEGE, and PG-b-PEGE-b-PG copolymers in water present a two-stage phase transition, that is, firstly LCST-type and then the upper critical solution temperature (UCST)-like phase transition. In addition, we have extended the research on the thermoresponsive properties of EGE homopolymers without specific α-chain ends.

Maltotriose-Chlorin e6 Conjugate Linked via Tetraethyleneglycol as an Advanced Photosensitizer for Photodynamic Therapy. Synthesis and Antitumor Activities against Canine and Mouse Mammary Carcinoma Cells.

Glycoconjugated chlorins represent a promising class of compounds that meet the requirements for the third-generation photosensitizer (PS) for photodynamic therapy (PDT). We have focused on the use of glucose (Glc) to improve the performance of the PS based on the Warburg effect-a phenomenon where tumors consume higher Glc levels than normal cells. However, as a matter of fact, Glc-conjugation has a poor efficacy in hydrophilic modification; thus, the resultant PS is not suitable for intravenous injection. In this study, a Glc-based oligosaccharide, such as maltotriose (Mal3), is conjugated to chlorin e6 (Ce6). The conjugation is assisted by two additional molecular tools, such as propargyl amine and a tetraethylene glycol (TEG) derivative. This route produced the target Mal3-Ce6 conjugate linked via the TEG spacer (Mal3-TEG-Ce6), which shows the required photoabsorption properties in the physiological media. The PDT test using canine mammary carcinoma (SNP) cells suggested that the antitumor activity of Mal3-TEG-Ce6 is extremely high. Furthermore, in vitro tests against mouse mammary carcinoma (EMT6) cells have been demonstrated, providing insights into the photocytotoxicity, subcellular localization, and analysis of cell death and reactive oxygen species (ROS) generation for the PDT system with Mal3-TEG-Ce6. Both apoptosis and necrosis of the EMT6 cells occur by ROS that is generated via the photochemical reaction between Mal3-TEG-Ce6 and molecular oxygen. Consequently, Mal3-TEG-Ce6 is shown to be a PS showing the currently desired properties.

Enhancement of plant and bacterial lectin binding affinities by three-dimensional organized cluster glycosides constructed on helical poly(phenylacetylene) backbones.

A series of poly(phenylacetylene)s bearing diverse saccharide pendants--N-acetyl-D-glucosamine, D-lactose, and N-acetyl-D-neuraminic acid--were synthesized by rhodium-mediated polymerizations of the corresponding acetyl-protected glycosylated phenylacetylenes followed by deprotection. The circular dichroism spectra of these glycosylated poly(phenylacetylene)s each displayed split-type Cotton effects in the long absorption region of the conjugated polymer backbone (260-500 nm), thus indicating predominantly one-handed helical conformations in their backbones. The binding affinities of these glycosylated poly(phenylacetylene)s, and those of previously reported phenylacetylenes bearing D-galactose, towards plant and bacterial lectins were investigated by hemagglutination inhibition assay and isothermal titration calorimetry (ITC). The stoichiometries of binding vary strongly, depending on the lectin binding sites and the accessibilities of the carbohydrate residues in the helices. The measured affinities also vary, with the maximum value observed for the interaction between poly-PA-α-Gal and lectin I from Pseudomonas aeruginosa, with a K(d) value of 4 µM per monosaccharide representing a 200-fold increase relative to the corresponding monomer.

Thermoresponsive vesicular morphologies obtained by self-assemblies of hybrid oligosaccharide-block-poly(N-isopropylacrylamide) copolymer systems.

This work discusses the self-assembly properties of thermoresponsive hybrid oligosaccharide-block-poly(N-isopropylacrylamide) copolymer systems: maltoheptaose-block-poly(N-isopropylacrylamide) (Mal(7)-b-PNIPAM(n)) copolymers. Those systems at different molar masses and volume fractions were synthesized using Cu(I)-catalyzed 1,3-dipolar azide/alkyne cycloaddition, so-called "click" chemistry, between an alkynyl-functionalized maltoheptaose (1) and poly(N-isopropylacrylamide) having a terminal azido group (N(3)-PNIPAM(n)) prepared by atom transfer radical polymerization (ATRP). While the cloud point (T(cp)) of the N(3)-PNIPAM(n) ranged from 36.4 to 51.5 degrees C depending on the degree of polymerization, those obtained of the diblock copolymers ranged from 39.4 to 73.9 degrees C. The self-assembly of such systems is favored due to the hydrophobicity of the PNIPAM in water above the T(cp). While the N(3)-PNIPAM(n) present polydisperse globular shape with a mean diameter of 500 nm, well-defined vesicular morphologies with an approximate diameter of 300 nm are obtained in diblock copolymer systems. These results were obtained and confirmed using static and dynamic light scattering as well as imaging techniques such as transmission electron microscope experiments.

Supramolecular J-aggregate assembly of a covalently linked zinc porphyrin--beta-cyclodextrin conjugate in a water/ethanol binary mixture.

The aggregation behavior of the zinc porphyrin-beta-CD conjugate in a water/ethanol binary mixed solution was investigated. The spectroscopic data and the atomic force microscopy (AFM) image strongly suggest that a part of a Zn porphyrin is included in the beta-CD nanocavity of another ZnP-beta-CD conjugate at certain concentrations, leading to the formation of Zn porphyrin J-aggregates.

Size-specific, colorimetric detection of counteranions by using helical poly(phenylacetylene) conjugated to L-leucine groups through urea acceptors.

A colorimetric detection susceptible to the dimensions of guest counteranions has been demonstrated by using poly(phenylacetylene) with L-leucine and urea functionalities (poly-PA-Leu). Poly-PA-Leu was prepared from N-(4-ethynylphenylcarbamoyl)-L-leucine ethyl ester (PA-Leu) by using [Rh(+){eta(6)-C(6)H(5))B(-)(C(6)H(5))(3)}(2,5-norbornadiene)] as a catalyst. The biased helical conformation of poly-PA-Leu was demonstrated through Cotton effects in the circular dichroism (CD) spectra. The addition of ammonium salts, including tetra-n-butylammonium acetate, tetra-n-butylammonium chloride, and tetra-n-butylammonium bromide anions (CH(3)COO(-), Cl(-), and Br(-)), into the poly-PA-Leu solution intensified the CD responses of poly-PA-Leu, which is indicative of the chiral adjustability of anion recognition by using urea groups. In addition, the combination of poly-PA-Leu with the CH(3)COO(-), Cl(-), and Br(-) anions promoted large redshifts in the absorption spectra, thus providing dramatic color changes from pale yellow to red. Guest dependency in the CD and UV/Vis spectra was clearly correlated with the size of the counteranions. Fundamentally, the addition of tetra-n-butylammonium nitrate, tetra-n-butylammonium hydrogen sulfate, tetra-n-butylammonium perchlorate, tetra-n-butylammonium azide, tetra-n-butylammonium fluoride, and tetra-n-butylammonium iodide anions (NO(3) (-), HSO(4) (-), ClO(4) (-), N(3) (-), F(-), and I(-)) has no effect on either the CD or UV/Vis profiles of poly-PA-Leu. The guest specificity observed in the CD and UV/Vis spectra clearly demonstrated the guest-dimension selectivity of poly-PA-Leu in counteranion recognition.

Thermochemical transformation of glucose to 1,6-anhydroglucose in high-temperature steam.

An aqueous solution of glucose was reacted at temperatures from 200 to 400 degrees C under atmospheric pressure using a continuous flow reactor. For reaction temperatures above 300 degrees C, the liquid product yield was not sensitive to the temperature change; on the other hand, below 300 degrees C, it decreased rapidly with decreasing temperature. 1,6-Anhydro-beta-D-glucopyranose (AGP) and 1,6-anhydro-beta-D-glucofuranose (AGF) were the major components in the liquid product. The yields of AGP and AGF were 40% and 19%, respectively, at 360 degrees C and a feed rate of 0.5 mL/min. The optimum space time to produce AGP and AGF was about 0.2-0.4s under the present temperature conditions.

Comb-shaped, temperature-tunable and water-soluble porphyrin-based thermoresponsive copolymer for enhanced photodynamic therapy.

A novel comb-shaped porphyrin end-functionalized poly(N-isopropylacrylamide)-b-poly[oligo (ethylene glycol methyl ether methacrylate)] (Por-PNIPAM-b-POEGMA) was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Due to the incorporation of hydrophilic POEGMA contents, the copolymer shows the lower critical solution temperatures (LCST) of 37-41.8°C higher than PNIPAM. Moreover, this copolymer showed efficient singlet oxygen under light irradiation at 650nm, and the productivity of singlet oxygen was 0.59, which could be used for photodynamic therapy. In addition, the in vitro study indicated that this copolymer showed no significant dark cytotoxicity, while showed apparent photo-toxicity toward HeLa cancer cells under red light irradiation at 650nm. MTT results indicated that this copolymer with appropriate LCST could be accumulated on locally tumor tissues and killing of cancer cells (Hela), which may be a promising photosensitizer in photodynamic therapy for cancer treatment.

Synthesis of hyperbranched carbohydrate polymers by ring-opening multibranching polymerization of anhydro sugar.

The synthesis of novel hyperbranched carbohydrate polymers, prepared by the ring-opening multibranching polymerizations of anhydro and dianhydro sugars, is described. The hyperbranched carbohydrate polymers were formed by the cationic polymerization of 1,6-anhydro-beta-D-hexopyranose, 1,4-anhydrotetritol, 2,3-anhydrotetritol, and 1,2:5,6-dianhydro-D-mannitol. These polymerizations proceeded without gelation to produce water-soluble hyperbranched carbohydrate polymers with controlled molecular weights and narrow polydispersities. The values for the degree of branching of the polymers were in the range of 0.28-0.50. The polymerization method, which proceeds through a ring-opening reaction by a proton-transfer reaction mechanism, is a facile method leading to a spherical carbohydrate polymer with a high degree of branching.

Synthesis and characterization of Eu(III) complexes of modified d-glucosamine and poly(N-isopropylacrylamide).

A series of chain-end functional polymers composed of poly(N-isopropylacrylamide) (PNIPAM) and 2-amino-2-deoxy-d-glucopyranose(d-glucosamine, GA) was synthesized via atom transfer radical polymerization (ATRP). Novel fluorescent complexes of glucosamine-PNI- PAM/Eu(III) were then formed by chelation of the polymers and europium(III) ions. The aqueous solutions of the polymers and its Eu(III) complexes exhibited a lower critical solution temperatures (LCSTs), and which were approximately equal to body temperature. Cell viability assays suggested that these thermosensitive polymers and Eu(III) complexes showed excellent biocompatibility in vitro.