RESUMO
In this study, Kraft lignin was modified by ammonium dihydrogen phosphate (ADP) and urea for achieving phosphorylation and carbamylation, aiming to protect wood against biological and fire attack. Scots pine (Pinus sylvestris L.) sapwood was impregnated with a water solution containing Kraft lignin, ADP, and urea, followed by heat treatment at 150 °C, resulting in changes in the properties of the Kraft lignin as well as the wood matrix. Infrared spectroscopy, 13C cross-polarisation magic-angle-spinning (MAS) nuclear magnetic resonance (NMR), and direct excitation single-pulse 31P MAS NMR analyses suggested the grafting reaction of phosphate and carbamylate groups onto the hydroxyl groups of Kraft lignin. Scanning electron microscopy with energy dispersive X-ray spectroscopy indicated that the condensed Kraft lignin filled the lumen as well as partially penetrating the wood cell wall. The modified Kraft lignin imparted fire-retardancy and increased char residue to the wood at elevated temperature, as confirmed by limiting oxygen index, microscale combustion calorimetry, and thermogravimetric analysis. The modified wood exhibited superior resistance against mold and decay fungi attack under laboratory conditions. The modified wood had a similar modulus of elasticity to the unmodified wood, while experiencing a reduction in the modulus of rupture.
Assuntos
Lignina , Pinus sylvestris , Madeira , Lignina/química , Lignina/farmacologia , Madeira/química , Pinus sylvestris/química , Fosforilação/efeitos dos fármacos , Incêndios , Espectroscopia de Ressonância MagnéticaRESUMO
The exterior application of fire-retardant (FR) timber necessitates it to have high durability because of the possibility to be exposed to rainfall. In this study, water-leaching resistance of FR wood has been imparted by grafting phosphate and carbamate groups of the water-soluble FR additives ammonium dihydrogen phosphate (ADP)/urea onto the hydroxyl groups of wood polymers via vacuum-pressure impregnation, followed by drying/heating in hot air. A darker and more reddish wood surface was observed after the modification. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, solid-state 13C cross-polarization magic-angle-spinning nuclear magnetic resonance (13C CP-MAS NMR), and direct-excitation 31P MAS NMR suggested the formation of C-O-P covalent bonds and urethane chemical bridges. Scanning electron microscopy/energy-dispersive X-ray spectrometry suggested the diffusion of ADP/urea into the cell wall. The gas evolution analyzed by thermogravimetric analysis coupled with quadrupole mass spectrometry revealed a potential grafting reaction mechanism starting with the thermal decomposition of urea. Thermal behavior showed that the FR-modified wood lowered the main decomposition temperature and promoted the formation of char residues at elevated temperatures. The FR activity was preserved even after an extensive water-leaching test, confirmed by the limiting oxygen index (LOI) and cone calorimetry. The reduction of fire hazards was achieved through the increase of the LOI to above 80%, reduction of 30% of the peak heat release rate (pHRR2), reduction of smoke production, and a longer ignition time. The modulus of elasticity of FR-modified wood increased by 40% without significantly decreasing the modulus of rupture.
RESUMO
Natural weathering test at two different European climatic zones were conducted to investigate simultaneously both, the fungal colonisation and weathering process of Scots pine wood (Pinus sylvestris L.). The hypothesis was that the wood performing differently in various climate conditions might affect fungal infestation. The colour changes, wettability, and glossiness were measured as indicators of weathering progress of wood together with an assessment of fungal diversity. Different intensities in weathering, occupancy, and colonisation of fungi on wooden surface were detected. A higher number of fungal species was found on wood exposed to the warm temperate climates compared to subarctic or boreal climates. The dominant fungal species in both locations were from the genera Cladosporium and Aureobasidium.
RESUMO
Guanyl-urea phosphate (GUP) was introduced into furfurylated wood in order to improve fire retardancy. Modified wood was produced via vacuum-pressure impregnation of the GUP-furfuryl alcohol (FA) aqueous solution, which was then polymerized at elevated temperature. The water leaching resistance of the treated wood was tested according to European standard EN 84, while the leached water was analyzed using ultra-performance liquid chromatography (UPLC) and inductively coupled plasma-sector field mass spectrometry (ICP-SFMS). This new type of furfurylated wood was further characterized in the laboratory by evaluating its morphology and elemental composition using optical microscopy and electron microscopy coupled with energy-dispersive X-ray spectrometry (SEM-EDX). The chemical functionality was detected using infrared spectroscopy (FTIR), and the fire resistance was tested using cone calorimetry. The dimensional stability was evaluated in wet-dry soaking cycle tests, along with the mechanical properties, such as the Brinell hardness and bending strength. The fire retardancy of the modified furfurylated wood indicated that the flammability of wood can be depressed to some extent by introducing GUP. This was reflected in an observed reduction in heat release rate (HRR2) from 454.8 to 264.9 kW/m2, without a reduction in the material properties. In addition, this leaching-resistant furfurylated wood exhibited higher fire retardancy compared to conventional furfurylated wood. A potential method for producing fire-retardant treated furfurylated wood stable to water exposure has been suggested.
RESUMO
The objective of the work was to improve the leaching resistance of fire-retardant (FR) modified wood by the incorporation of a thermoset resin. Here, Scots pine (Pinus sylvestris L.) sapwood was impregnated with melamine formaldehyde (MF) resin and hydrophilic FRs guanyl-urea phosphate/boric acid by a vacuum-pressure treatment. Resistance to leaching of FR-modified wood was evaluated, after conducting an accelerated aging test according to European standard EN 84. Inductively coupled plasma analysis showed that the incorporation of MF resin significantly reduced the leachability of FRs. Scanning electron microscopy/energy-dispersive X-ray spectrometry revealed that the mechanism of water resistance was by doping the FRs into MF resin microspheres. Fourier transform infrared spectra showed the chemical functionality changes of FR-modified wood such as the formation of methylene bridges by drying the modified wood specimens. An increase in the thermal stability of FR-modified wood was confirmed by thermal gravimetric analysis. Excellent fire performance of FR-modified wood after leaching was affirmed by the limiting oxygen index and cone calorimeter tests.
RESUMO
BACKGROUND: The genus Pleurotus is most exploitable xylotrophic fungi, with valuable biotechnological, medical, and nutritional properties. The relevant features of the representatives of this genus to provide attractive low-cost industrial tools have been reported in numerous studies to resolve the pressure of ecological issues. Additionally, a number of Pleurotus species are highly adaptive, do not require any special conditions for growth, and possess specific resistance to contaminating diseases and pests. The unique properties of Pleurotus species widely used in many environmental technologies, such as organic solid waste recycling, chemical pollutant degradation, and bioethanol production. METHODOLOGY: The literature study encompasses peer-reviewed journals identified by systematic searches of electronic databases such as Google Scholar, NCBI, Springer, ResearchGate, ScienceDirect, and ISI Web of Knowledge. The search scheme was divided into several steps, as described below. RESULTS: In this review, we describe studies examining the biotechnological feasibility of Pleurotus spp. to elucidate the importance of this genus for use in green technology. Here, we review areas of application of the genus Pleurotus as a prospective biotechnological tool. CONCLUSION: The incomplete description of some fungal biochemical pathways emphasises the future research goals for this fungal culture.
RESUMO
The objective of this study was to explore an effect of the combined inorganic materials on the wood hardness and flame-retardancy properties in a concept of sustainable material management. Herein, the reinforcement of Scots pine (Pinus sylvestris L.) sapwood with sodium silicate and TiO2 nanoparticles via vacuum-pressure technique is reported. Pyrolysis of modified wood was studied by TG-FTIR analysis; the results showed that maximum weight loss for the modified wood was obtained at 40-50 °C lower temperatures compared to the reference untreated wood. The Gram-Schmidt profiles and spectra extracted at maxima absorption from Gram-Schmidt plots indicated chemical changes in wood-inorganic composites. SEM/EDS analysis revealed the presence of Na-O-Si solid gel within the wood-cell lumen and showed that TiO2 was homogeneously distributed within the amorphous Na-O-Si glass-forming phase to form a thin surface coating. EDS mapping further revealed the higher diffusivity of sodium into the cell wall compared to the silicon compound. The presence of amorphous sodium silicate and nano-TiO2 was additionally confirmed by XRD analysis. FTIR spectra confirmed the chemical changes in Scots pine sapwood induced by alkalization. Brinell hardness test showed that the hardness of the modified wood increased with the highest value (44% increase in hardness) obtained for 10% Na2SiO3-nTiO2 modified wood. The results showed good correlation between TG and flammability test; limiting oxygen index (LOI) values for the wood-inorganic composites increased by 9-14% compared to the untreated wood.
RESUMO
[This corrects the article DOI: 10.1039/C9RA05200C.].
RESUMO
During industrial wood drying, extractives migrate towards the wood surfaces and make the material more susceptible to photo/biodegradation. The present work provides information about the distribution, quantity and nature of lipophilic substances beneath the surface in air- and kiln-dried Scots pine (Pinus sylvestris L.) sapwood boards. Samples were taken from knot-free sapwood surfaces and the composition of lipophilic extractives, phenols and low-molecular fatty/resin acids layers at different nominal depths below the surface was studied gravimetrically, by UV-spectrometry and by gas chromatography-mass spectrometry (GC-MS). The concentration of total extractives was significantly higher in kiln-dried than in air-dried samples and was higher close to the surface than in the layers beneath. The scatter in the values for the lipophilic extractives was high in both drying types, being highest for linoleic acid and slightly lower for palmitic, oleic and stearic acids. The amount of fatty acids was low in kiln-dried boards, probably due to a stronger degradation due to the high temperature employed. The most abundant resin acid was dehydroabietic acid followed by pimaric, isopimaric, and abietic acids in both drying types. It is concluded that during kiln-drying a migration front is created at a depth of 0.25 mm with a thickness of about 0.5 mm.
Assuntos
Lipídeos/análise , Pinus sylvestris/química , Madeira/análise , Cromatografia Gasosa-Espectrometria de Massas , Indústrias , Ácido Linoleico/análise , Ácidos Oleicos/análise , Ácidos Palmíticos/análise , Extratos Vegetais/análiseRESUMO
While game accessibility has improved significantly the last few years, there are still barriers for equal participation and multiplayer issues have been less researched. Game balance is here about making the game fair in a player versus player competitive game. One difficult design task is to balance the game to be fair regardless of visual or hearing capabilities, with clearly different requirements. This paper explores a tentative design method for enabling inclusive competitive game-play without individual adaptations of game rules that could spoil the game. The method involved applying a unified design method to design an unbalanced game, then modifying visual feedback as a hypothetical balanced design, and testing the game with totally 52 people with and without visual or hearing disabilities in three workshops. Game balance was evaluated based on score differences and less structured qualitative data, and a redesign of the game was made. Conclusions are a tentative method for balancing a multiplayer, competitive game without changing game rules and how the method can be applied.