Formation of Products of Incomplete Destruction (PID) from the Thermal Oxidative Decomposition of Perfluorooctanoic Acid (PFOA): Measurement, Modeling, and Reaction Pathways.

The thermal decomposition of perfluorooctanoic acid (PFOA) under oxidative conditions was investigated using air (O2) and N2O as oxidants over temperatures ranging from 400 to 1000 °C in an α-alumina reactor. In the presence of air, PFOA was found to decompose into perfluorohept-1-ene (C7F14) and perfluoroheptanoyl fluoride (C7F14O) in addition to HF, CO, and CO2. At temperatures above 800 °C, both C7F14 and C7F14O were no longer detected. A comprehensive analysis of the reaction mechanisms through quantum chemical analysis and kinetic modeling in combination with experimental observations was utilized to identify key reaction pathways. Quantum chemical analysis led to the conclusion that oxygen atoms are crucial in decomposing perfluoroalk-1-enes, especially the stable perfluorohept-1-ene (C7F14). Under oxidative conditions, it was found that significant quantities of C2F6 and CF4 were formed. Further quantum chemical analysis suggests that the O atoms facilitate the formation of volatile fluorinated compounds (VFCs) such as tetrafluoromethane (CF4) and hexafluoroethane (C2F6), particularly at higher temperatures. By elucidating these key reactions, an improved understanding of the potential formation products of incomplete combustion (PICs) or products of incomplete destruction (PIDs) is made.

Facile and Eco-Friendly Approach To Produce Confined Metal Cluster Catalysts.

Zeolite-supported metal nanocluster catalysts have attracted significant attention due to their broad application in heterogeneously catalyzed reactions. The preparation of highly dispersed metal catalysts commonly involves the use of organic compounds and requires the implementation of complicated procedures, which are neither green nor deployable at the large scale. Herein, we present a novel facile method (vacuum-heating) which employs a specific thermal vacuum processing protocol of catalysts to promote the decomposition of metal precursors. The removal of coordinated H2O via vacuum-heating restricts the formation of intermediates (metal-bound OH species), resulting in catalysts with a uniform, metal nanocluster distribution. The structure of the intermediate was determined by in situ Fourier transform infrared, temperature-programmed decomposition, and X-ray absorption spectroscopy (XAS) measurements. This alternative synthesis method is eco-friendly and cost-effective as the procedure occurs in the absence of organic compounds. It can be widely used for the preparation of catalysts from different metal species (Ni, Fe, Cu, Co, Zn) and precursors and is readily scaled-up.

Prospective sampling bias in COVID-19 recruitment methods: experimental evidence from a national randomized survey testing recruitment materials.

BACKGROUND: In the context of the COVID-19 pandemic, social science research has required recruiting many prospective participants. Many researchers have explicitly taken advantage of widespread public interest in COVID-19 to advertise their studies. Leveraging this interest, however, risks creating unrepresentative samples due to differential interest in the topic. In this study, we investigate the design of survey recruitment materials with respect to the views of resultant participants. METHODS: Within a pan-Canadian survey (stratified random mail sampling, n = 1969), the design of recruitment invitations to prospective respondents was experimentally varied, with some prospective respondents receiving COVID-specific recruitment messages and others receiving more general recruitment messages (described as research about health and health policy). All respondents participated, however, in the same survey, allowing comparison of both demographic and attitudinal features between these groups. RESULTS: Respondents recruited via COVID-19 specific postcards were more likely to agree that COVID-19 is serious and believe that they were likely to contract COVID-19 compared to non-COVID respondents (odds = 0.71, p = 0.04; odds = 0.74, p = 0.03 respectively; comparing health to COVID-19 framed respondents). COVID-19 specific respondents were more likely to disagree that the COVID-19 threat was exaggerated compared to the non-COVID survey respondents (odds = 1.44, p = 0.02). CONCLUSIONS: COVID-19 recruitment framing garnered a higher response rate, as well as a sample with greater concern about coronavirus risks and impacts than respondents who received more neutrally framed recruitment materials.

How well do covariates perform when adjusting for sampling bias in online COVID-19 research? Insights from multiverse analyses.

COVID-19 research has relied heavily on convenience-based samples, which-though often necessary-are susceptible to important sampling biases. We begin with a theoretical overview and introduction to the dynamics that underlie sampling bias. We then empirically examine sampling bias in online COVID-19 surveys and evaluate the degree to which common statistical adjustments for demographic covariates successfully attenuate such bias. This registered study analysed responses to identical questions from three convenience and three largely representative samples (total N = 13,731) collected online in Canada within the International COVID-19 Awareness and Responses Evaluation Study ( www.icarestudy.com ). We compared samples on 11 behavioural and psychological outcomes (e.g., adherence to COVID-19 prevention measures, vaccine intentions) across three time points and employed multiverse-style analyses to examine how 512 combinations of demographic covariates (e.g., sex, age, education, income, ethnicity) impacted sampling discrepancies on these outcomes. Significant discrepancies emerged between samples on 73% of outcomes. Participants in the convenience samples held more positive thoughts towards and engaged in more COVID-19 prevention behaviours. Covariates attenuated sampling differences in only 55% of cases and increased differences in 45%. No covariate performed reliably well. Our results suggest that online convenience samples may display more positive dispositions towards COVID-19 prevention behaviours being studied than would samples drawn using more representative means. Adjusting results for demographic covariates frequently increased rather than decreased bias, suggesting that researchers should be cautious when interpreting adjusted findings. Using multiverse-style analyses as extended sensitivity analyses is recommended.

Tibial nerve stimulation increases vaginal blood perfusion and bone mineral density and yield load in ovariectomized rat menopause model.

INTRODUCTION AND HYPOTHESIS: Human menopause transition and post-menopausal syndrome, driven by reduced ovarian activity and estrogen levels, are associated with an increased risk for symptoms including but not limited to sexual dysfunction, metabolic disease, and osteoporosis. Current treatments are limited in efficacy and may have adverse consequences, so investigation for additional treatment options is necessary. Previous studies have demonstrated that percutaneous tibial nerve stimulation (PTNS) and electro-acupuncture near the tibial nerve are minimally invasive treatments that increase vaginal blood perfusion or serum estrogen in the rat model. We hypothesized that PTNS would protect against harmful reproductive and systemic changes associated with menopause. METHODS: We examined the effects of twice-weekly PTNS (0.2 ms pulse width, 20 Hz, 2× motor threshold) under ketamine-xylazine anesthesia in ovariectomized (OVX) female Sprague-Dawley rats on menopause-associated physiological parameters including serum estradiol, body weight, blood glucose, bone health, and vaginal blood perfusion. Rats were split into three groups (n = 10 per group): (1) intact control (no stimulation), (2) OVX control (no stimulation), and (3) OVX stimulation (treatment group). RESULTS: PTNS did not affect serum estradiol levels, body weight, or blood glucose. PTNS transiently increased vaginal blood perfusion during stimulation for up to 5 weeks after OVX and increased areal bone mineral density and yield load of the right femur (side of stimulation) compared to the unstimulated OVX control. CONCLUSIONS: PTNS may ameliorate some symptoms associated with menopause. Additional studies to elucidate the full potential of PTNS on menopause-associated symptoms under different experimental conditions are warranted.

Safety of School Playgrounds: Field Analysis From a Randomized Sample.

Research supports recess, however, playground injuries are prevalent with more than 200,000 cases per year requiring medical attention. School playgrounds are among the leading location for injury. The purpose was to identify the safety and risk factors of playground environments and impact attenuation characteristics of surfacing materials. Results demonstrated 46% playground spaces protected students from traffic. Results found 75% of playgrounds were exposed to full sun, and unitary surface materials were up to 49°F warmer than the air temperature. There was an increase in the probability of risk whether equipment height was over 9 ft for loose fill surfacing materials or over 6 ft for unitary surfaces. Loose strings or ropes looped over equipment were found on 23% of playgrounds. This study provides discussion and data pertaining to numerous aspects of playground safety. Strategies for school nurses are shared to shape policies and education for playground safety practices.

Pyrolysis of Glyphosate and Its Toxic Products.

With health concerns developing about the use of glyphosate (phosphonomethylglycine, PMG), the world's most used herbicide, the possibility of destruction of stockpiles via incineration arises. Little is known, however, about the possible toxic products of decomposition. We have performed a quantum chemical computation of the mechanism of thermal decomposition of PMG. Two initiation channels, one producing sarcosine and the other producing N-methylaminomethylphosphonic acid, have been located. Both the initial products decompose to dimethylamine (DMA), and the mechanism of further decomposition and toxic products is explored. Global potential energy surfaces for the initial decomposition of DMA are presented together with chemical kinetic modeling wherein the rate constants employed have been calculated from the quantum chemical data. Time and temperature evolution of the expected toxic products are presented and discussed.

Eye injury from electrical weapon probes: Mechanisms and treatment.

PURPOSE: While generally reducing morbidity and mortality, TASER® electrical weapons have risks associated with their usage, including burn injuries and head and cervical trauma associated with uncontrolled falls. The primary non-fatal complications appear to be significant eye injury but no analysis of the mechanisms or suggested treatments has been published. METHODS: We used a biomechanical model to predict the risk of eye injury as a function of distance from the weapon muzzle to the eye. We compared our model results to recently published epidemiological findings. We also describe the typical presentation and suggest treatment options. RESULTS: The globe rupture model predicted that a globe rupture can be expected (50% risk) when the eye is within 6 m of the muzzle and decreases rapidly beyond that. This critical distance is 9 m for lens and retinal damage which is approximately the range of the most common probe cartridges. Beyond 9 m, hyphema is expected along with a perforation by the dart portion of the probe. Our prediction of globe rupture out to 6 m (out of a typical range of 9 m) is consistent with the published risk of enucleation or unilateral blindness being 69 ±â€¯18%, with an eye penetration. CONCLUSIONS: Significant eye injury is expected from a penetration by an electrical weapon probe at close range. The risk decreases rapidly at extended distances from the muzzle. Not all penetrating globe injuries from electrical weapon probes will result in blindness.

Mechanism of the Thermal Decomposition of Chlorpyrifos and Formation of the Dioxin Analog, 2,3,7,8-Tetrachloro-1,4-dioxino-dipyridine (TCDDpy).

Thermal decomposition of the pesticide, chlorpyrifos (CPf) and its major degradation product, 3,5,6-trichloro-2-pyridinol (TCpyol), has been studied by quantum chemical calculation using density functional methods at the M06-2X/GTLarge//M06-2 X/6-31+G(d,p) level of theory. Chlopyrifos was found to undergo a series of unimolecular stepwise elimination reactions releasing two molecules of ethylene and finally HOPOS to form TCpyol. TCpyol underwent oxidative decomposition initiated by abstraction of its phenolic H atom by O2. Two phenoxy radicals so produced underwent combination leading to the formation of 2,3,7,8-tetrachloro-[1,4]dioxinodipyridine (TCDDpy). Via Smiles rearrangement both cis and trans TCDDpy are formed. Kinetic models have been constructed to model the decomposition of CPf into TCpyol and of the latter into cis and trans TCDDpy. Modeled results are compared with the experiments of Sakiyama et al. ( Organohalogen Compounds, 2012, 74, 1441-1444).

A mechanistic study of the Knoevenagel condensation reaction: new insights into the influence of acid and base properties of mixed metal oxide catalysts on the catalytic activity.

A Knoevenagel condensation reaction between benzaldehyde and ethyl cyanoacetate was performed in the liquid phase under mild and solventless conditions using a series of catalysts modified by impregnating magnesium and barium cations on different supports (SiO2, ZnO, γ-Al2O3 and Fe2O3). The highest reaction rates and yields (after 6 hours) were observed using ZnO which possessed the highest concentration of acidic and basic sites, as determined by TPD-MS. In situ FTIR experiments show that the adsorption of ethyl cyanoacetate on ZnO results in an increase of hydroxyl intermediate species on the ZnO surface. There is evidence to suggest that the reaction proceeds via an autocatalytic pathway, as an induction period was observed before the observed catalytic activity. It was also found that both surface acidic and basic sites are necessary to obtain high rates of the catalytic reaction. By comparing the catalytic activity with the catalyst surface basicity, we are able to determine the optimum proportion of acid and base sites necessary to obtain the highest reaction rates.

Mechanism and Rate of Thermal Decomposition of Hexachlorocyclopentadiene and Its Importance in PCDD/F Formation from the Combustion of Cyclodiene Pesticides.

Thermal decomposition of hexachlorocyclopentadiene (HCCP) has been studied in inert gas and under oxidative conditions in a silica flow reactor at a residence time of 5.0 s between 690 and 923 K and 1 atm pressure. Pyrolysis was initiated by Cl bond fission to form pentachlorocyclopentadienyl radical; two such radicals then combined to undergo a series of intramolecular rearrangements and Cl fissions, producing principally octachloronaphthalene (8ClNP) and Cl2. This process has been studied by quantum chemical calculation, and a reaction potential energy surface has been developed. The rate constant of initial Cl atom fission has been calculated by canonical variational transition state theory as k = 1.45 × 1015 exp(-222 ± 9 kJ mol-1/RT) s-1 between 500 and 2000 K. A minimal kinetic model was developed to model the decomposition and major products. Oxidative decomposition was studied in nitrogen with O2 contents of 1, 6, 12, and 20 mol %. Increasing O2 to 6-8% increased the rate of decomposition of HCCP and decreased the yield of 8ClNP. Above 823 K, hexachlorobenzene (HCB) and CO became major products. The oxidative reaction has also been studied quantum chemically. At high O2 content (>∼10%), the rate of decomposition of HCCP declined as did yields of 8ClNP and HCB, but CO yields increased.

Gas Phase Thermal Oxidation of Endosulfan and Formation of Polychlorinated Dibenzo-p-dioxins and Dibenzofurans.

This paper investigates the thermal decomposition of technical endosulfan under oxidative conditions and the subsequent formation of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/F, dioxins), and their precursors. Both quantum chemical calculations and laboratory experiments were employed to investigate the pathways of oxidation of endosulfan. The laboratory scale apparatus used consists of a tubular reactor and product collection system and analysis train. The results report the effect of temperature (523-923 K) and O2 concentration on PCDD/F formation in a N2 bath gas at a residence time of 5 s. The decomposition of endosulfan produces two types of PCDD/F precursors, involving all chlorinated benzenes (CBz) and chlorinated phenols (CPh). Oxidation of endosulfan favors the formation of PCDF over PCDD. Octachlorodibenzofuran is the most abundant homologue group detected in all experiments. The maximum emission factor for PCDD/F was observed at 923 K and O2 content of 6% and corresponds to 64 ng TEQ-WHO2005 per mg of endosulfan and a total dioxin concentration of 1131 ng/mg of endosulfan.

Formation of PCDD/Fs in Oxidation of 2-Chlorophenol on Neat Silica Surface.

This contribution studies partial oxidation of 2-chlorophenol on surfaces of neat silica at temperatures of 250, 350, and 400 °C; i.e., temperatures that frequently lead to catalytic formation of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) from their precursors. We have identified 2,6-dichlorophenol (2,6-DCPh), 2,4-dichlorophenol (2,4-DCPh), and 2,4,6-trichlorophenol (2,4,6-TriCPh), but have detected no chlorinated benzenes (CBzs). The detected chlorinated and nonchlorinated DD/Fs comprise dibenzo-p-dioxin (DD), 1- and 2-monochlorodibenzo-p-dioxin (1-, 2-MCDD), 1,6-, 1,9-, 1,3-dichlorodibenzo-p-dioxin (1,6-, 1,9-, 1,3-DCDD), 4-monochlorodibenzofuran (4-MCDF), and 4,6-dichlorodibenzofuran (4,6-DCDF) at the reaction temperatures of 350 and 400 °C. However, at a lower reaction temperature, 250 °C, we have detected no PCDD/Fs. We have demonstrated that neat silica surfaces catalyze the generation of PCDD/Fs from chlorophenols at the upper range of the catalytic formation temperature of PCDD/F. The present finding proves the generation of PCDD/Fs on particles of fly ash, even in the absence of transition metals.

Towards understanding the improved stability of palladium supported on TS-1 for catalytic combustion.

A novel Pd supported on TS-1 combustion catalyst was synthesized and tested in methane combustion under very lean and under highly humid conditions (<1%). A notable increase in hydrothermal stability was observed over 1900 h time-on-stream experiments, where an almost constant, steady state activity obtaining 90% methane conversion was achieved below 500 °C. Surface oxygen mobility and coverage plays a major role in the activity and stability of the lean methane combustion in the presence of large excess of water vapour. We identified water adsorption and in turn the hydrophobicity of the catalyst support as the major factor influencing the long term stability of combustion catalysts. While Pd/Al2O3 catalyst shows a higher turn-over frequency than that of Pd/TS-1 catalyst, the situation reversed after ca. 1900 h on stream. Two linear regions, with different activation energies in the Arrhenius plot for the equilibrium Pd/TS-1 catalyst, were observed. The conclusions were supported by catalyst characterization using H2-chemisorption, TPD, XPS analyses as well as N2-adsorption-desorption, XRD, SEM, TEM. The hydrophobicity and competitive adsorption of water with oxygen is suggested to influence oxygen surface coverage and in turn the apparent activation energy for the oxidation reaction.

S-Nitrosation of Aminothiones.

Nitrosation reactions span a diverse range of applications, from biochemistry to industrially important processes. This study examines nitrosation of aminothiones in acidic solutions and re-evaluates currently accepted diffusion limits and the true nature of the nitrosating agent for nitrous acid initiated reactions. Experimental measurements from stopped-flow UV/vis spectrophotometry afforded derivation of equilibrium constants and reaction enthalpies. Apparent Keq corresponds to 559-382 M(-2) for thioacetamide (TA, 15-25 °C) and 12600-5590 M(-2) for thiourea (TU, 15-35 °C), whereas the reaction enthalpies amount to -27.10 ± 0.05 kJ for TA and -29.30 ± 0.05 kJ for TU. Theoretical calculations via a thermochemical cycle agree well with reaction free energies from experiments, with errors of -2-4 kJ using solvation method SMD in conjunction with hybrid meta exchange-correlation functional M05-2X and high-accuracy multistep method CBS-QB3 for gas-phase calculations. The kinetic rates increase with acidity at activation energies of 54.9 (TA) and 66.1 kJ·mol(-1) (TU) for the same temperature range, confirming activation-controlled reactions. At pH 1 and below, the main decomposition pathway for the S-nitroso species leads to formation of nitric oxide.

Thermodynamic stability and structure of cuprous chloride surfaces: a DFT investigation.

Density functional theory together with ab initio atomistic thermodynamics has been utilized to study the structures and stabilities of the low index CuCl surfaces. It is shown that the Cl-terminated structures are more stable than the Cu-terminated configurations, and that the defective CuCl(110)-Cu structure is more stable than the stoichiometric CuCl(110) surface. The equilibrium shape of a cuprous chloride nanostructure terminated by low-index CuCl surfaces has also been predicted using a Wulff construction. It was found that the (110) facets dominate at low chlorine concentration. As the chlorine concentration is increased, however, the contributions of the (100) and (111) facets to the Wulff construction also increase giving the crystal a semi-prism shape. At high chlorine concentration, and close to the rich limit, the (111) facets were found to be the only contributors to the Wulff construction, resulting in prismatic nanocrystals.

Epidemiological Characteristics of School Playground Injuries.

Reports of children's play-related injuries have remained stagnant according to epidemiology studies of the past 3 decades. This article provides a unique look into the context of playground injuries within an entire school district, demonstrating the prevalence of these injuries. This study reports that playgrounds are the leading location of school injury, comprising one-third of all elementary school injuries. This study found that while head/neck injuries were the most commonly injured body region within the playground environment, the proportion of head/neck injuries decreased with age, whereas the proportion of extremity injuries increased with age. At least 1 upper extremity injury required outside medical attention for every 4 that were treated on-site, making upper extremity injuries roughly twice as likely to require outside medical attention as injuries to other body regions. The data in this study are useful for interpreting injury patterns in the context and evaluation of existing safety standards for playgrounds.

Restoring continuous finger function with temporarily paralyzed nonhuman primates using brain-machine interfaces.

Objective.Brain-machine interfaces (BMIs) have shown promise in extracting upper extremity movement intention from the thoughts of nonhuman primates and people with tetraplegia. Attempts to restore a user's own hand and arm function have employed functional electrical stimulation (FES), but most work has restored discrete grasps. Little is known about how well FES can control continuous finger movements. Here, we use a low-power brain-controlled functional electrical stimulation (BCFES) system to restore continuous volitional control of finger positions to a monkey with a temporarily paralyzed hand.Approach.We delivered a nerve block to the median, radial, and ulnar nerves just proximal to the elbow to simulate finger paralysis, then used a closed-loop BMI to predict finger movements the monkey was attempting to make in two tasks. The BCFES task was one-dimensional in which all fingers moved together, and we used the BMI's predictions to control FES of the monkey's finger muscles. The virtual two-finger task was two-dimensional in which the index finger moved simultaneously and independently from the middle, ring, and small fingers, and we used the BMI's predictions to control movements of virtual fingers, with no FES.Main results.In the BCFES task, the monkey improved his success rate to 83% (1.5 s median acquisition time) when using the BCFES system during temporary paralysis from 8.8% (9.5 s median acquisition time, equal to the trial timeout) when attempting to use his temporarily paralyzed hand. In one monkey performing the virtual two-finger task with no FES, we found BMI performance (task success rate and completion time) could be completely recovered following temporary paralysis by executing recalibrated feedback-intention training one time.Significance.These results suggest that BCFES can restore continuous finger function during temporary paralysis using existing low-power technologies and brain-control may not be the limiting factor in a BCFES neuroprosthesis.