RESUMO
BACKGROUND: To deliver therapeutics into the brain, it is imperative to overcome the issue of the blood-brain-barrier (BBB). One of the ways to circumvent the BBB is to administer therapeutics directly into the brain parenchyma. To enhance the treatment efficacy for chronic neurodegenerative disorders, repeated administration to the target location is required. However, this increases the number of operations that must be performed. In this study, we developed the IntraBrain Injector (IBI), a new implantable device to repeatedly deliver therapeutics into the brain parenchyma. METHODS: We designed and fabricated IBI with medical grade materials, and evaluated the efficacy and safety of IBI in 9 beagles. The trajectory of IBI to the hippocampus was simulated prior to surgery and the device was implanted using 3D-printed adaptor and surgical guides. Ferumoxytol-labeled mesenchymal stem cells (MSCs) were injected into the hippocampus via IBI, and magnetic resonance images were taken before and after the administration to analyze the accuracy of repeated injection. RESULTS: We compared the planned vs. insertion trajectory of IBI to the hippocampus. With a similarity of 0.990 ± 0.001 (mean ± standard deviation), precise targeting of IBI was confirmed by comparing planned vs. insertion trajectories of IBI. Multiple administrations of ferumoxytol-labeled MSCs into the hippocampus using IBI were both feasible and successful (success rate of 76.7%). Safety of initial IBI implantation, repeated administration of therapeutics, and long-term implantation have all been evaluated in this study. CONCLUSION: Precise and repeated delivery of therapeutics into the brain parenchyma can be done without performing additional surgeries via IBI implantation.
Assuntos
Óxido Ferroso-Férrico , Células-Tronco Mesenquimais , Animais , Encéfalo/diagnóstico por imagem , Encéfalo/cirurgia , Cães , Humanos , Imageamento Tridimensional , Imageamento por Ressonância Magnética/métodosRESUMO
BACKGROUND: ERCP training models are very different in terms of anatomical differences, ethical issues, storage problems, realistic tactile sensation, durability and portability. There is no easy way to select an optimized model for ERCP training. If the ERCP training model could be made as a soft silicone model using 3D printing technique, it would have numerous advantages over the models presented so far. The purpose of this study was to develop an optimized ERCP training model using a 3D printing technique and to try to find ways for implementing various practical techniques. METHODS: All organ parts of this model were fabricated using silicone molding techniques with 3D printing. Especially, various anatomy of the ampulla of Vater and common bile duct (CBD) were creatively designed for different diagnostic and therapeutic procedures. In order to manufacture each of the designed organ parts with silicone, a negative part had to be newly designed to produce the molder. The negative molders were 3D printed and then injection molding was applied to obtain organ parts in silicone material. The eight different types of ampulla and CBD were repeatedly utilized and replaced to the main system as a module-type. RESULTS: ERCP training silicone model using 3D technique was semi-permanently used to repeat various ERCP procedures. All ERCP procedures using this model could be observed by real-time fluoroscopic examination as well as endoscopic examination simultaneously. Using different ampulla and CBD modules, basic biliary cannulation, difficult cannulation, stone extraction, mechanical lithotripsy, metal stent insertion, plastic stent insertion, and balloon dilation were successfully and repeatedly achieved. Endoscopic sphincterotomy was also performed on a specialized ampulla using a Vienna sausage. After repeat procedures and trainings, all parts of organs including the ampulla and CBD modules were not markedly damaged or deformed. CONCLUSIONS: We made a specialized ERCP training silicon model with 3D printing technique. This model is durable, relatively cheap and easy to make, and thus allows the users to perform various specialized ERCP techniques, which increases its chances of being a good ERCP training model.
Assuntos
Colangiopancreatografia Retrógrada Endoscópica/métodos , Gastroenterologia/educação , Modelos Anatômicos , Impressão Tridimensional , Ampola Hepatopancreática/cirurgia , Ducto Colédoco/cirurgia , Humanos , SilícioRESUMO
STATEMENT OF PROBLEM: The accuracy of 3D printing technology is essential for clinical applications. However, depending on the 3D printing method, machine, and environment, the accuracy varies even if the same computer-aided design (CAD) model is printed. PURPOSE: The purpose of this in vitro study was to evaluate the differences between the CAD model and the printed parts with a simplified guide designed based on the implant guide and to compare the accuracy among 3 types of 3D printers. MATERIAL AND METHODS: A maxilla and mandible implant guide made of complex anatomic structures is difficult to measure accurately. For accurate measurements, 16 simplified guides were designed based on the maxilla and mandible implant guide. The 16 simplified guides were fabricated by using the following 3 different 3D printer technologies: photopolymer jetting (PolyJet), stereolithography apparatus (SLA), and multijet printing (MJP). Each simplified guide was measured 4 times with digital calipers for 20 linear measurements. The measured simplified guides were compared with the CAD model, and the accuracy of the 3D printers was compared. The mean absolute difference and mean relative difference were calculated, and the Bland-Altman analysis was used to evaluate the limits of agreement between the CAD model and the printed parts. The Wilcoxon signed-rank test was performed to evaluate the significant differences among the 3D printers (α=.05). RESULTS: The mean absolute difference and the mean relative difference between the CAD model and the 3D-printed parts were 0.06 ±0.05 mm (0.46 ±0.51%) for PolyJet, 0.09 ±0.05 mm (0.66 ±0.62%) for SLA, and 0.31 ±0.33 mm (1.11 ±0.70%) for MJP. When the 3D printers were compared, significant differences were found between SLA and MJP (P=.006) and between PolyJet and MJP (P=.001). CONCLUSIONS: When the CAD models and the 3D-printed parts of the simplified implant guides were compared, significant accuracy differences were observed. The PolyJet and SLA 3D printers met the required accuracy for clinical applications in dentistry. The most suitable 3D printer, however, should be selected considering all factors.
Assuntos
Implantes Dentários , Desenho Assistido por Computador , Maxila , Impressão Tridimensional , EstereolitografiaRESUMO
This study aimed to compare shallow and deep learning of classifying the patterns of interstitial lung diseases (ILDs). Using high-resolution computed tomography images, two experienced radiologists marked 1200 regions of interest (ROIs), in which 600 ROIs were each acquired using a GE or Siemens scanner and each group of 600 ROIs consisted of 100 ROIs for subregions that included normal and five regional pulmonary disease patterns (ground-glass opacity, consolidation, reticular opacity, emphysema, and honeycombing). We employed the convolution neural network (CNN) with six learnable layers that consisted of four convolution layers and two fully connected layers. The classification results were compared with the results classified by a shallow learning of a support vector machine (SVM). The CNN classifier showed significantly better performance for accuracy compared with that of the SVM classifier by 6-9%. As the convolution layer increases, the classification accuracy of the CNN showed better performance from 81.27 to 95.12%. Especially in the cases showing pathological ambiguity such as between normal and emphysema cases or between honeycombing and reticular opacity cases, the increment of the convolution layer greatly drops the misclassification rate between each case. Conclusively, the CNN classifier showed significantly greater accuracy than the SVM classifier, and the results implied structural characteristics that are inherent to the specific ILD patterns.
Assuntos
Aprendizado Profundo , Doenças Pulmonares Intersticiais/classificação , Doenças Pulmonares Intersticiais/diagnóstico por imagem , Reconhecimento Automatizado de Padrão/métodos , Tomografia Computadorizada por Raios X/métodos , Algoritmos , Estudos de Coortes , Feminino , Humanos , Doenças Pulmonares Intersticiais/patologia , Masculino , Redes Neurais de Computação , Estudos RetrospectivosRESUMO
OBJECTIVES: To evaluate clinical outcomes of fluoroscopic removal of retrievable self-expandable metal stents (SEMSs) for malignant oesophageal strictures, to compare clinical outcomes of three different removal techniques, and to identify predictive factors of successful removal by the standard technique (primary technical success). METHODS: A total of 137 stents were removed from 128 patients with malignant oesophageal strictures. Primary overall technical success and removal-related complications were evaluated. Logistic regression models were constructed to identify predictive factors of primary technical success. RESULTS: Primary technical success rate was 78.8 % (108/137). Complications occurred in six (4.4 %) cases. Stent location in the upper oesophagus (P=0.004), stricture length over 8 cm (P=0.030), and proximal granulation tissue (P<0.001) were negative predictive factors of primary technical success. If granulation tissue was present at the proximal end, eversion technique was more frequently required (P=0.002). CONCLUSIONS: Fluoroscopic removal of retrievable SEMSs for malignant oesophageal strictures using three different removal techniques appeared to be safe and easy. The standard technique is safe and effective in the majority of patients. The presence of proximal granulation tissue, stent location in the upper oesophagus, and stricture length over 8 cm were negative predictive factors for primary technical success by standard extraction and may require a modified removal technique. KEY POINTS: ⢠Fluoroscopic retrievable SEMS removal is safe and effective. ⢠Standard removal technique by traction is effective in the majority of patients. ⢠Three negative predictive factors of primary technical success were identified. ⢠Caution should be exercised during the removal in those situations. ⢠Eversion technique is effective in cases of proximal granulation tissue.
Assuntos
Remoção de Dispositivo/métodos , Estenose Esofágica/terapia , Stents , Feminino , Fluoroscopia , Humanos , Masculino , Metais , Pessoa de Meia-Idade , Resultado do TratamentoRESUMO
PURPOSE: To evaluate the frequency, severity, and clinical significance of stent abutment (SA) after gastroduodenal stent placement in patients with gastric outlet obstruction caused by unresectable gastric cancer. MATERIALS AND METHODS: A retrospective study was conducted in a single tertiary referral university hospital to identify the incidence and clinical significance of SA in 318 patients who underwent self-expandable metallic stent placement. SA was defined as abutment of the distal end of the stent to the duodenal wall and/or superior duodenal flexure. The outcomes included technical and clinical success, complications, repeat intervention, stent patency, and survival. RESULTS: A total of 318 patients, 107 with SA (33.6%) and 211 without, were included. SA occurred partially (n = 64; 59.8%) and completely (n = 43; 40.2%). The technical and clinical outcomes and survival were similar in the groups with and without SA. Food impaction and resultant repeat intervention rates were higher in the SA group than in the non-SA group (P < .001 and P < .001, respectively), and were associated with complete SA (P = .007). Stent patency rate was lower in the SA group than in the non-SA group (P = .003). CONCLUSIONS: SA was associated with increased food impaction, resulting in a greater incidence of stent malfunction and shorter stent patency compared with a lack of SA. The concept of SA may be useful for the improvement of stent patency and avoidance of food impaction.
Assuntos
Obstrução da Saída Gástrica/etiologia , Obstrução da Saída Gástrica/terapia , Falha de Prótese , Stents/efeitos adversos , Neoplasias Gástricas/complicações , Idoso , Idoso de 80 Anos ou mais , Feminino , Obstrução da Saída Gástrica/mortalidade , Humanos , Masculino , Pessoa de Meia-Idade , Cuidados Paliativos , Desenho de Prótese , Retratamento , Estudos Retrospectivos , Neoplasias Gástricas/mortalidade , Resultado do TratamentoRESUMO
Background Self-expandable metallic stent (SEMS) placement is a well-established palliative treatment approach for malignant gastroduodenal obstruction. In patients with a long (>10 cm) stricture, multiple stents placed in an overlapping fashion are often required. Purpose To investigate the outcomes of overlapping SEMS placement for the palliative treatment of malignant gastroduodenal obstruction in patients with a long (>10 cm) stricture. Material and Methods The medical records of 40 patients who underwent fluoroscopic overlapping SEMS placement for malignant gastroduodenal obstruction due to a long (>10 cm) stricture were reviewed. Results The technical and clinical success rates were 100% and 65.0%, respectively. The mean length of the stricture was 17.0 ± 4.7 cm and the mean number of stents placed in each patient was 2.2 ± 0.5. Metastatic cancer (odds ratio [OR], 0.315; P = 0.018), Eastern Cooperative Oncology Group (ECOG) score ≥3 (OR, 0.018; P = 0.006), and carcinomatosis with ascites (OR, 0.025; P = 0.017) were independent predictors of poor clinical success. The rates of minor and major complications were 27.5% and 2.5%, respectively. The median stent patency and survival were 33 days (interquartile range [IQR], 19-60 days) and 35 days (IQR, 19-73 days), respectively. An ECOG score ≥3 was an independent predictor of a poor survival outcome (hazard ratio, 4.681; P < 0.001). Conclusion Overlapping SEMS placement may be safe and effective for the palliative treatment of malignant gastroduodenal obstruction in patients with a long (>10 cm) stricture.
Assuntos
Obstrução da Saída Gástrica/etiologia , Obstrução da Saída Gástrica/cirurgia , Cuidados Paliativos/métodos , Stents Metálicos Autoexpansíveis , Neoplasias Gástricas/complicações , Feminino , Fluoroscopia , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Estômago/cirurgia , Resultado do TratamentoRESUMO
PURPOSE: The present study aims to improve precision of four-dimensional (4D) phase-contrast (PC) MRI technique by using multiple velocity encoding (VENC) parameters. THEORY AND METHODS: The 3D flow fields in an in vitro stenosis phantom and an in vivo ascending aorta were determined using a 4D PC-MRI sequence with multiple VENC values. The velocity field obtained for large VENC was combined with that from small VENC, unless velocity data were lost by phase aliasing and phase dispersion. Noise levels of the combined velocity fields were compared with the increasing overlapping number of VENC parameters. RESULTS: The phantom measurement showed that the multi-VENC acquisition reduced the noise levels in radial and axial velocities (> 24 cm/s at VENC = 300 cm/s) down to 0.80 ± 0.45 cm/s and 5.60 ± 2.63 cm/s, respectively. This increased the velocity-to-noise ratio (VNR) by approximately two-fold to six-fold depending on the locations. As a result, the multi-VENC measurement could visualize the low-velocity recirculating flows more clearly. CONCLUSION: The multi-VENC measurement of 4D PC-MRI sequence increased the VNR distribution by reducing velocity noise. The improved VNR can be beneficial for investigating blood flow structures in a flow field with a high velocity dynamic range.
Assuntos
Aorta/diagnóstico por imagem , Aorta/patologia , Processamento de Imagem Assistida por Computador/métodos , Imageamento por Ressonância Magnética/métodos , Idoso , Velocidade do Fluxo Sanguíneo , Constrição Patológica , Humanos , Imageamento Tridimensional/métodos , Masculino , Imagens de Fantasmas , Reprodutibilidade dos Testes , Razão Sinal-RuídoRESUMO
OBJECTIVES: To validate 4D flow MRI in a flow phantom using a flowmeter and computational fluid dynamics (CFD) as reference. METHODS: Validation of 4D flow MRI was performed using flow phantoms with 75 % and 90 % stenosis. The effect of spatial resolution on flow rate, peak velocity and flow patterns was investigated in coronal and axial scans. The accuracy of flow rate with 4D flow MRI was evaluated using a flowmeter as reference, and the peak velocity and flow patterns obtained were compared with CFD analysis results. RESULTS: 4D flow MRI accurately measured the flow rate in proximal and distal regions of the stenosis (percent error ≤3.6 % in axial scanning with 1.6-mm resolution). The peak velocity of 4D flow MRI was underestimated by more than 22.8 %, especially from the second half of the stenosis. With 1-mm isotropic resolution, the maximum thickness of the recirculating flow region was estimated within a 1-mm difference, but the turbulent velocity fluctuations mostly disappeared in the post-stenotic region. CONCLUSION: 4D flow MRI accurately measures the flow rates in the proximal and distal regions of a stenosis in axial scan but has limitations in its estimation of peak velocity and turbulent characteristics. KEY POINTS: ⢠4D flow MRI accurately measures the flow rate in axial scan. ⢠The peak velocity was underestimated by 4D flow MRI. â¢4D flow MRI demonstrates the principal pattern of post-stenotic flow.
Assuntos
Arteriopatias Oclusivas/diagnóstico por imagem , Hidrodinâmica , Angiografia por Ressonância Magnética/métodos , Modelos Cardiovasculares , Arteriopatias Oclusivas/fisiopatologia , Velocidade do Fluxo Sanguíneo/fisiologia , Simulação por Computador , Constrição Patológica , Fluxômetros , Humanos , Imageamento Tridimensional/métodos , Imagens de FantasmasRESUMO
Sleep spindles are rhythmic patterns of neuronal activity generated within the thalamocortical circuit. Although spindles have been hypothesized to protect sleep by reducing the influence of external stimuli, it remains to be confirmed experimentally whether there is a direct relationship between sleep spindles and the stability of sleep. We have addressed this issue by using in vivo photostimulation of the thalamic reticular nucleus of mice to generate spindle oscillations that are structurally and functionally similar to spontaneous sleep spindles. Such optogenetic generation of sleep spindles increased the duration of non-rapid eye movement (NREM) sleep. Furthermore, the density of sleep spindles was correlated with the amount of NREM sleep. These findings establish a causal relationship between sleep spindles and the stability of NREM sleep, strongly supporting a role for the thalamocortical circuit in sleep regulation.
Assuntos
Fases do Sono/fisiologia , Sono/fisiologia , Animais , Channelrhodopsins , Eletroencefalografia , Fenômenos Eletrofisiológicos , Núcleos Intralaminares do Tálamo/fisiologia , Masculino , Camundongos , Camundongos Transgênicos , Neocórtex/fisiologia , Optogenética , Periodicidade , Estimulação LuminosaRESUMO
Importance: Repetitive transcranial magnetic stimulation (rTMS) has emerged as a safe and promising intervention for Alzheimer disease (AD). Objective: To investigate the effect of a 4-week personalized hippocampal network-targeted rTMS on cognitive and functional performance, as well as functional connectivity in AD. Design, Setting, and Participants: This randomized clinical trial, which was sham-controlled and masked to participants and evaluators, was conducted between May 2020 and April 2022 at a single Korean memory clinic. Eligible participants were between ages 55 and 90 years and had confirmed early AD with evidence of an amyloid biomarker. Participants who met the inclusion criteria were randomly assigned to receive hippocampal network-targeted rTMS or sham stimulation. Participants received 4-week rTMS treatment, with assessment conducted at weeks 4 and 8. Data were analyzed between April 2022 and January 2024. Interventions: Each patient received 20 sessions of personalized rTMS targeting the left parietal area, functionally connected to the hippocampus, based on fMRI connectivity analysis over 4 weeks. The sham group underwent the same procedure, excluding actual magnetic stimulation. A personalized 3-dimensional printed frame to fix the TMS coil to the optimal target site was produced. Main Outcomes and Measures: The primary outcome was the change in the AD Assessment Scale-Cognitive Subscale test (ADAS-Cog) after 8 weeks from baseline. Secondary outcomes included changes in the Clinical Dementia Rating-Sum of Boxes (CDR-SOB) and Seoul-Instrumental Activity Daily Living (S-IADL) scales, as well as resting-state fMRI connectivity between the hippocampus and cortical areas. Results: Among 30 participants (18 in the rTMS group; 12 in the sham group) who completed the 8-week trial, the mean (SD) age was 69.8 (9.1) years; 18 (60%) were female. As the primary outcome, the change in ADAS-Cog at the eighth week was significantly different between the rTMS and sham groups (coefficient [SE], -5.2 [1.6]; P = .002). The change in CDR-SOB (-4.5 [1.4]; P = .007) and S-IADL (1.7 [0.7]; P = .004) were significantly different between the groups favoring rTMS groups. The fMRI connectivity analysis revealed that rTMS increased the functional connectivity between the hippocampus and precuneus, with its changes associated with improvements in ADAS-Cog (r = -0.57; P = .005). Conclusions and Relevance: This randomized clinical trial demonstrated the positive effects of rTMS on cognitive and functional performance, and the plastic changes in the hippocampal-cortical network. Our results support the consideration of rTMS as a potential treatment for AD. Trial Registration: ClinicalTrials.gov Identifier: NCT04260724.
Assuntos
Doença de Alzheimer , Hipocampo , Estimulação Magnética Transcraniana , Humanos , Doença de Alzheimer/terapia , Doença de Alzheimer/fisiopatologia , Feminino , Masculino , Idoso , Hipocampo/diagnóstico por imagem , Hipocampo/fisiopatologia , Estimulação Magnética Transcraniana/métodos , Pessoa de Meia-Idade , Imageamento por Ressonância Magnética/métodos , Idoso de 80 Anos ou mais , Resultado do TratamentoRESUMO
Objectives: Paraplegia is a distressing complication after open thoracoabdominal aortic aneurysm (TAAA) repair, and revascularization of T8-L2-level segmental arteries is considered pivotal to prevent paraplegia. We employed 3-dimensional (3D) printing to efficiently revascularize segmental/visceral arteries and prospectively evaluated its safety and efficacy. Methods: From January 1, 2020, to June 30, 2022, we prospectively enrolled patients of extent I, II, or III TAAA repair. Guidance models were 3D-printed based on preoperative computed tomography, and multibranched aortic grafts were manually constructed upon this model before surgery. The composite outcome of operative mortality, permanent stroke, and permanent spinal cord deficit (SCD) was compared with the historical control group (n = 77, in 2015-2020), subjected to similar TAAA repair without 3D printing. Results: A total of 38 patients (58.6 ± 13.2 years) underwent open TAAA repair with the aid of 3D printing. Extent I, II, and III repairs were performed in 14 (36.8%), 17 (44.7%), and 7 (18.4%), respectively. Concomitant arch repair and bi-iliac reconstruction were performed in 7 (18.4%) and 6 patients (15.8%), respectively. Mean pump time was 107.7 ± 55.5 minutes. Operative mortality, permanent stroke, and permanent SCD each occurred in 1 patient (2.6%), and the incidence of the composite outcome was 7.9% (3/38). In the control group, mean pump time was 166.0 ± 83.9 minutes, significantly longer than the 3D-printing group (P < .001), and operative mortality, permanent stroke, permanent SCD, and the composite outcome occurred in 7 (9.1%), 9 (11.7%), 8 (10.4%), and 19 (24.7%), respectively. Conclusions: Open repairs of extensive TAAA with 3D printing showed favorable safety and efficacy, which need further validation by larger studies.
RESUMO
BACKGROUND: A challenging problem for patients undergoing breast-conserving surgery after neoadjuvant chemotherapy (NACT) is the accuracy of preoperative tumor localization. After chemotherapy, the original tumor is likely to shrink or scatter dramatically or even show complete remission. For breast-conserving surgery, the development of a guidance device to accurately estimate the resection area is imperative. CASE PRESENTATION: We produced a three-dimensional (3D)-printed breast surgical guide (BSG) based on prone and supine magnetic resonance imaging (MRI). This device was tested on a patient who underwent breast-conserving surgery after NACT. Both ultrasonography and MRI revealed that the tumor shrank substantially after NACT. Identifying the target tumor area using pre-NACT MRI was feasible, and the tumor was safely removed with clear resection margins. CONCLUSION: The BSG has several advantages over conventional methods for tumor localization after NACT. In particular, the BSG provided precise quantitative MRI information about the tumor area.
RESUMO
Tumor localization in patients receiving neoadjuvant chemotherapy (NACT) is challenging because substantial therapeutic remission of the original tumor after NACT is often noted. Currently, there is no guidance device that allows for an accurate estimation of the resection range in breast-conserving surgery after NACT. To increase the accuracy of tumor resection, we used a 3-dimensional-printed breast surgical guide based on magnetic resonance imaging (MRI) in the supine position for a breast cancer patient who underwent breast-conserving surgery after NACT. Using this device, the breast tumor with apparent therapeutic changes after NACT on imaging was successfully removed with clear resection margins by identifying the original tumor site in the affected breast. Irrespective of whether the residual tumor area after NACT is well defined, it is possible to confirm and target the tumor area on pre-NACT MRI using this device.
RESUMO
PURPOSE: To evaluate the osseous anatomy of the proximal femur extracted from a 3D-MRI volumetric interpolated breath-hold (VIBE) sequence using either a Dixon or water excitation (WE) fat suppression method, and to measure the overall difference using CT as a reference standard. MATERIAL AND METHODS: This retrospective study reviewed imaging of adult patients with hip pain who underwent 3D hip MRI and CT. A semi-automatically segmented CT model served as the reference standard, and MRI segmentation was performed manually for each unilateral hip joint. The differences between Dixon-VIBE-3D-MRI vs. CT, and WE-VIBE-3D-MRI vs. CT, were measured. Equivalence tests between Dixon-VIBE and WE-VIBE models were performed with a threshold of 0.1 mm. Bland-Altman plots and Lin's concordance-correlation coefficient were used to analyze the agreement between WE and Dixon sequences. Subgroup analyses were performed for the femoral head/neck, intertrochanteric, and femoral shaft areas. RESULTS: The mean and maximum differences between Dixon-VIBE-3D-MRI vs. CT were 0.2917 and 3.4908 mm, respectively, whereas for WE-VIBE-3D-MRI vs. CT they were 0.3162 and 3.1599 mm. The mean differences of the WE and Dixon methods were equivalent (P = 0.0292). However, the maximum difference was not equivalent between the two methods and it was higher in WE method. Lin's concordance-correlation coefficient showed poor agreement between Dixon and WE methods. The mean differences between the CT and 3D-MRI models were significantly higher in the femoral shaft area (P = 0.0004 for WE and P = 0.0015 for Dixon) than in the other areas. The maximum difference was greatest in the intertrochanteric area for both techniques. CONCLUSION: The difference between 3D-MR and CT models were acceptable with a maximal difference below 3.5mm. WE and Dixon fat suppression methods were equivalent. The mean difference was highest at the femoral shaft area, which was off-center from the magnetization field.
Assuntos
Tecido Adiposo/diagnóstico por imagem , Neoplasias Ósseas/diagnóstico por imagem , Fêmur/diagnóstico por imagem , Articulação do Quadril/diagnóstico por imagem , Interpretação de Imagem Assistida por Computador/métodos , Osteonecrose/diagnóstico por imagem , Adulto , Neoplasias Ósseas/patologia , Feminino , Fêmur/patologia , Articulação do Quadril/patologia , Humanos , Aumento da Imagem/métodos , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-Idade , Osteonecrose/patologia , Estudos Retrospectivos , Tomografia Computadorizada por Raios XRESUMO
In thoracoabdominal aortic aneurysm repair, repairing the visceral and segmental arteries is challenging. Although there is a pre-hand-sewn and multi-branched graft based on the conventional image-based technique, it has shortcomings in precisely positioning and directing the visceral and segmental arteries. Here, we introduce two new reconstruction techniques using patient-specific 3D-printed graft reconstruction guides: (1) model-based technique that presents the projected aortic graft, visualizing the main aortic body and its major branches and (2) guide-based technique in which the branching vessels in the visualization model are replaced by marking points identifiable by tactile sense. We demonstrate the effectiveness by evaluating conventional and new techniques based on accuracy, marking time requirement, reproducibility, and results of survey to surgeons on the perceived efficiency and efficacy. The graft reconstruction guides cover the segmentation, design, fabrication, post-processing, and clinical application of open surgical repair of thoracoabdominal aneurysm, and proved to be efficient for accurately reconstructing customized grafts.
Assuntos
Aorta/cirurgia , Aneurisma da Aorta Torácica/cirurgia , Implante de Prótese Vascular/métodos , Medicina de Precisão/métodos , Adulto , Idoso , Aorta/patologia , Aneurisma da Aorta Torácica/patologia , Prótese Vascular , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Impressão Tridimensional/instrumentação , Reprodutibilidade dos Testes , Estudos Retrospectivos , Resultado do TratamentoRESUMO
Development of patient-specific CT imaging phantoms with randomly incorporated lesions of various shapes and sizes for calibrating image intensity and validating quantitative measurement software is very challenging. In this investigation, a physical phantom that accurately represents a patient's specific anatomy and the intensity of lung CT images at the voxel level will be fabricated using fused deposition modeling (FDM) 3D printing. Segmentation and modeling of a patient's CT data were performed by an expert and the results were confirmed by a thoracic radiologist with more than 20 years of experience. This facilitated the extraction of the details of the patient's anatomy; various kinds of nodules with different shapes and sizes were randomly added to the modeled lung for evaluating the size-accuracy of the quantification software. To achieve these Hounsfield Units (HU) ranges for the corresponding voxels in acquired CT scans, the infill ratios of FDM 3D printing were controlled. Based on CT scans of the 3D printed phantoms, the measured HU for normal pulmonary parenchyma, ground glass opacity (GGO), and solid nodules were determined to be within target HU ranges. The accuracy of the mean absolute difference and the mean relative difference of nodules were less than 0.55â±â0.30âmm and 3.72â±â1.64% (mean differenceâ±â95 CI), respectively. Patient-specific CT imaging phantoms were designed and manufactured using an FDM printer, which could be applied for the precise calibration of CT intensity and the validation of image quantification software.
Assuntos
Pulmão/diagnóstico por imagem , Imagens de Fantasmas , Impressão Tridimensional , Tomografia Computadorizada por Raios X/instrumentação , HumanosRESUMO
We quantitatively evaluated breast tumor movement and volume changes between magnetic resonance imaging (MRI) scans in prone and supine positions. Twenty-seven breast tumor patients who received neoadjuvant systemic therapy (NST) for breast-conserving surgery were studied. Before and after NST, MRI scans in prone and supine positions were performed immediately. Tumor segmentation, volume, and position of tumors were evaluated in both positions. Average tumor volumes in prone and supine positions did not significantly differ (p = 0.877). Tumor movement from prone to supine positions from the origin of the bottom center of the sternum was strongly correlated with the distance from the tumor center to the chest wall (r = 0.669; p < 0.05). Tumor changes from prone to supine positions measured from the origin of the nipple depended on the location of the tumor in the breast. The prone-to-supine movement of all tumors from the origin of the bottom center of the sternum tended to move outward from the sagittal centerline of the body on the coronal plane, to the inside of the body on the sagittal plane, and outward and downward close to the body on the axial plane, which might help in planning operations using prone MRI in supine-position breast cancer surgery.
Assuntos
Neoplasias da Mama/cirurgia , Mama/diagnóstico por imagem , Imageamento por Ressonância Magnética/métodos , Adulto , Mama/patologia , Neoplasias da Mama/diagnóstico por imagem , Feminino , Humanos , Mastectomia Segmentar , Pessoa de Meia-Idade , Terapia Neoadjuvante , Decúbito Ventral , Interpretação de Imagem Radiográfica Assistida por Computador , Decúbito DorsalRESUMO
Stereotaxic instruments are increasingly used in research animals for the study of disease, but typically require restraints and anesthetic procedures. A stereotaxic head mount that enables imaging of the anterior chamber of the eye in alert and freely mobile mice is presented in this study. The head mount is fitted based on computed tomography scans and manufactured using 3D printing. The system is placed noninvasively using temporal mount bars and a snout mount, without breaking the skin or risking suffocation, while an instrument channel stabilizes the ocular probes. With a flexible micro-endoscopic probe and a confocal scanning laser microscopy system, <20 µm resolution is achieved in vivo with a field of view of nearly 1 mm. Discomfort is minimal, and further adaptations for minimally invasive neuroscience, optogenetics and auditory studies are possible.