One-Pot Direct Mechanochemical Silicon Replacement of Sodium Fluorosilicate into Sodium Fluorozirconate and Functionalization of Graphite for Enhanced Sodium-Ion Storage.

Efficient sodium ion storage in graphite is as yet unattainable, because of the thermodynamic instability of sodium ion intercalates-graphite compounds. In this work, sodium fluorozirconate (Na3ZrF7, SFZ) functionalized graphite (SFZ-G) is designed and prepared by the in situ mechanochemical silicon (Si) replacement of sodium fluorosilicate (Na2SiF6, SFS) and functionalization of graphite at the same time. During the mechanochemical process, the atomic Si in SFS is directly replaced by atomic zirconium (Zr) from the zirconium oxide (ZrO2) balls and container in the presence of graphite, forming SFZ-G. The resulting SFZ-G, working as an anode material for sodium ion storage, shows a significantly enhanced capacity of 418.7 mAh g-1 at 0.1 C-rate, compared to pristine graphite (35 mAh g-1) and simply ball-milled graphite (BM-G, 200 mAh g-1). In addition, the SFZ-G exhibits stable sodium-ion storage performance with 86% of its initial capacity retention after 1000 cycles at 2.0 C-rate.

Refractory solar lentigines successfully treated with 532-nm nanosecond Nd:YAG Vasculature Salvage Laser Surgery (VSLS) system: Case series.

BACKGROUND: Solar lentigo, a common epidermal hyperpigmented lesion found in sun-exposed areas, results from the proliferation of melanocytes and the accumulation of melanin. Although various treatments for solar lentigo have been explored, they often lead to complications, including prolonged erythema and post-inflammatory hyperpigmentation (PIH), posing significant concerns. OBJECTIVES AND METHODS: This study evaluated the safety and efficacy of the Vasculature Salvage Laser Surgery (VSLS) system. We treated six Korean patients, each with solar lentigo, in a single session using the 532-nm nanosecond neodymium-doped yttrium aluminum garnet (Nd:YAG) VSLS system, with follow-up periods ranging from 3 to 10 weeks. RESULTS: The treatment led to the complete removal of pigmented lesions in all patients without resulting in PIH, even in cases where previous laser treatments had failed. The only side effect observed was mild erythema, which resolved over the long term in most instances. CONCLUSIONS: The VSLS system emerges as a safe and effective treatment for pigmented lesions, including refractory solar lentigines. Nonetheless, additional studies are required to verify its long-term efficacy.

First report of Perkinsus marinus occurrence associated with wild Pacific oysters Crassostrea gigas from the west coast of Korea.

This study reports the occurrence of Perkinsus marinus associated with wild Pacific oyster (Crassostrea gigas) specimens collected along the west coast of Korea. Confirmation of P. marinus presence was achieved by conventional PCR using World Organization of Animal Health (WOAH)-recommended primers that specifically targeted regions of the rDNA locus (ITS1, 5.8S, and ITS2). Sequencing of 10 samples revealed two distinct sequences differing by a single base pair, indicating potential haplotype variability. One sequence closely resembled the P. marinus strain found in Maryland, USA, whereas the other exhibited divergence, indicative of species diversity in the Korean strain, as was evident from the haplotype network analysis. Further validation involved the Ray's Fluid Thioglycollate Medium (RFTM) assay, which initially yielded inconclusive results, possibly due to low infection intensity. Subsequently, RFTM and 2 M NaOH assays conducted on the isolates in the present study, cultured P. marinus cells in standard DMEM/F12 medium, and a positive P. marinus strain (ATCC 50509), revealed characteristic hypnospores of P. marinus upon Lugol's iodine staining. These comprehensive investigations underscore the conclusive confirmation of P. marinus in Korean waters and mark a significant milestone in our understanding of the distribution and characteristics of this parasite in previously unreported regions.

Molecular and ultrastructural characterization of a novel cryptic species of the Mesomycetozoea clade isolated from Manila clam, Ruditapes philippinarum, on the west coast of Korea.

In the present study, a cryptic species (IchX) was isolated from the hemolymph of the Manila clam, Ruditapes philippinarum, collected from the west coast region of South Korea. Following comprehensive molecular analysis, a partial sequence resembling the small subunit of the ribosomal RNA (SSU rRNA) gene was obtained, indicating that this species belonged to the class Mesomycetozoea, also known as Ichthyosporea. Detailed phylogenetic analyses based on SSU rRNA sequences placed IchX in a distinct clade within the order Dermocystida, class Mesomycetozoea, and showed that IchX is closely related to Ichthyosporea sp. Microscopic examination of in vitro cultured IchX cells revealed life-cycle stages of different sizes, from the endospore to sporangium through vegetative stages. An ameboid-like structure was observed in the early endospore stages as the characteristic feature of zoospores. Ultrastructural analyses using scanning electron microscopy revealed that all endospores and vegetative cell stages are spherical. Transmission electron microscopy revealed characteristic features, including a spindle pole body and membrane-decorated hyaline vesicles, consistent with those previously described in Mesomycetozoea. In addition, a prominent fibrillar structure was observed. Notably, the cell wall of mature IchX sporangia was digested with 2 M NaOH, while that of the endospores was resistant. This is the first report of a novel Mesomycetozoean from the Manila clams. Further taxonomic study of this organism and elucidation of its pathological characteristics are necessary.

Association of ambient temperature with intentional self-harm and suicide death in Seoul: a case-crossover design with a distributed lag nonlinear model.

Previous epidemiological studies have reported a short-term association between ambient temperature and suicide risk. To gain a clearer understanding of this association, it is essential to differentiate the risk factors for intentional self-harm (ISH) from those specifically associated with suicide deaths. Therefore, this study aims to examine whether the association between daily temperature and ISH or suicide deaths differs by age and sex. Between 2014 and 2019, cases of emergency room visits related to ISH and suicide deaths in Seoul were identified. A time-stratified case-crossover design was used to adjust for temporal trends and seasonal variation. A distributed lag nonlinear model was used to analyze the nonlinear and time-delayed effect of ambient temperature on ISH and suicide deaths. Positive associations were observed between temperature and both ISH and suicide deaths. For ISH, the relative risk (RR) was high at 1.17 (95% confidence interval (CI): 1.03, 1.34) for a temperature of 25.7 °C compared with 14.8 °C. The RR for suicide death was higher than those for ISH, at 1.43 (95% CI: 1.03, 2.00) for a temperature of 33.7 °C. These associations varied by age and sex, with males and females aged 35-64 years showing increased susceptibility to suicide deaths. This study provides detailed evidence that unusually high temperatures, both anomalous and out of season, may trigger suicidal behaviors, including both ISH and suicide deaths.

Exponential Amplification Using Photoredox Autocatalysis.

Exponential molecular amplification such as the polymerase chain reaction is a powerful tool that allows ultrasensitive biodetection. Here, we report a new exponential amplification strategy based on photoredox autocatalysis, where eosin Y, a photocatalyst, amplifies itself by activating a nonfluorescent eosin Y derivative (EYH3-) under green light. The deactivated photocatalyst is stable and rapidly activated under low-intensity light, making the eosin Y amplification suitable for resource-limited settings. Through steady-state kinetic studies and reaction modeling, we found that EYH3- is either oxidized to eosin Y via one-electron oxidation by triplet eosin Y and subsequent 1e-/H+ transfer, or activated by singlet oxygen with the risk of degradation. By reducing the rate of the EYH3- degradation, we successfully improved EYH3--to-eosin Y recovery, achieving efficient autocatalytic eosin Y amplification. Additionally, to demonstrate its flexibility in output signals, we coupled the eosin Y amplification with photoinduced chromogenic polymerization, enabling sensitive visual detection of analytes. Finally, we applied the exponential amplification methods in developing bioassays for detection of biomarkers including SARS-CoV-2 nucleocapsid protein, an antigen used in the diagnosis of COVID-19.

Quantification of the inflammatory responses to pro-and anti-inflammatory agents in Manila clam, Ruditapes philippinarum.

Inflammation is a form of innate immune response of living organisms to harmful stimuli. In marine bivalves, inflammation is a common defense mechanism. Several studies have investigated the morphological features of inflammation in bivalves, such as hemocyte infiltration. However, the molecular and biochemical responses associated with inflammation in marine bivalves remain unexplored. Here, we investigated changes in nitric oxide (NO) levels, cyclooxygenase 2 (COX-2) activity, and allograft inflammatory factor-1 (AIF-1) gene expression levels in hemolymph samples collected from Manila clam (Ruditapes philippinarum) exposed to pro- and anti-inflammatory substances. These included the pro-inflammatory agent lipopolysaccharide (LPS), and the nonsteroidal anti-inflammatory drugs (NSAIDs) ibuprofen and diclofenac, all widely used in vertebrates. Our study showed that NO levels, COX-2 activity, and AIF-1 expression increased in response to the treatments with LPS and decreased in response to the treatments with NSAIDs in a concentration-dependent manner. These results suggest that the mechanism of inflammatory responses in bivalves is very similar to that of vertebrates, and we propose that inflammatory responses can be quantified using these techniques and used to determine the physiological status of marine bivalves exposed to biotic or abiotic stresses.

Continuous Productivity Improvement Using IoE Data for Fault Monitoring: An Automotive Parts Production Line Case Study.

This paper presents a case study of continuous productivity improvement of an automotive parts production line using Internet of Everything (IoE) data for fault monitoring. Continuous productivity improvement denotes an iterative process of analyzing and updating the production line configuration for productivity improvement based on measured data. Analysis for continuous improvement of a production system requires a set of data (machine uptime, downtime, cycle-time) that are not typically monitored by a conventional fault monitoring system. Although productivity improvement is a critical aspect for a manufacturing site, not many production systems are equipped with a dedicated data recording system towards continuous improvement. In this paper, we study the problem of how to derive the dataset required for continuous improvement from the measurement by a conventional fault monitoring system. In particular, we provide a case study of an automotive parts production line. Based on the data measured by the existing fault monitoring system, we model the production system and derive the dataset required for continuous improvement. Our approach provides the expected amount of improvement to operation managers in a numerical manner to help them make a decision on whether they should modify the line configuration or not.

Scanning electron microscopic observation of the in vitro cultured protozoan, Perkinsus olseni, isolated from the Manila clam, Ruditapes philippinarum.

BACKGROUND: Perkinsosis is a major disease affecting the commercially important marine mollusk Ruditapes philippinarum (Manila clam) in Asian waters. In this study, we investigated the morphological characteristics of Perkinsus olseni, the causative agent of perkinsosis, cultured under laboratory conditions at different stages of its life cycle using a scanning electron microscope (SEM). RESULTS: The prezoosporangia formed after induction with Ray's fluid thioglycollate medium (RFTM) developed into zoosporangia. During this process, a discharge tube formed a porous sponge-like structure that detached before the zoospores were released; thus, this organelle operated as a bung. Liberated zoospores gradually transformed into immature trophozoites, during which detachment of the anterior flagella occurred, but the loss of the posterior flagella was not clearly observed in the present study. Mature trophozoites underwent schizogony by cleaving the cell forming some merozoites in schizonts, which were released by the rupturing of the cellular membrane of the schizont within a few days. CONCLUSIONS: Our morphological and ultrastructural studies contribute new information on the life cycle and propagation of P. olseni.

Correction to: Scanning electron microscopic observation of the in vitro cultured protozoan, Perkinsus olseni, isolated from the Manila clam, Ruditapes philippinarum.

An amendment to this paper has been published and can be accessed via the original article.

Re-defining how mRNA degradation is coordinated with transcription and translation in bacteria.

In eukaryotic cells, transcription, translation, and mRNA degradation occur in distinct subcellular regions. How these mRNA processes are organized in bacteria, without employing membrane-bound compartments, remains unclear. Here, we present generalizable principles underlying coordination between these processes in bacteria. In Escherichia coli, we found that co-transcriptional degradation is rare for mRNAs except for those encoding inner membrane proteins, due to membrane localization of the main ribonuclease, RNase E. We further found, by varying ribosome binding sequences, that translation affects mRNA stability not because ribosomes protect mRNA from degradation, but because low translation leads to premature transcription termination in the absence of transcription-translation coupling. Extending our analyses to Bacillus subtilis and Caulobacter crescentus, we established subcellular localization of RNase E (or its homolog) and premature transcription termination in the absence of transcription-translation coupling as key determinants that explain differences in transcriptional and translational coupling to mRNA degradation across genes and species.

Analysis of Fluorescent Proteins for Observing Single Gene Locus in a Live and Fixed Escherichia coli Cell.

Fluorescent proteins (FPs) are essential tools for advanced microscopy techniques such as super-resolution imaging, single-particle tracking, and quantitative single-molecule counting. Various FPs fused to DNA-binding proteins have been used to observe the subcellular location and movement of specific gene loci in living and fixed bacterial cells. However, quantitative assessments of the properties of FPs for gene locus measurements are still lacking. Here, we assessed various FPs to observe specific gene loci in live and fixed Escherichia coli cells using a fluorescent repressor-operator binding system (FROS), tet operator-Tet repressor proteins (TetR). Tsr-fused FPs were used to assess the intensity and photostability of various FPs (five red FPs: mCherry2, FusionRed, mRFP, mCrimson3, and dKatushka; and seven yellow FPs: SYFP2, Venus, mCitrine, YPet, mClover3, mTopaz, and EYFP) at the single-molecule level in living cells. These FPs were then used for gene locus measurements using FROS. Our results indicate that TetR-mCrimson3 (red) and TetR-EYFP (yellow) had better properties for visualizing gene loci than the other TetR-FPs. Furthermore, fixation procedures affected the clustering of diffusing TetR-FPs and altered the locations of the TetR-FP foci. Fixation with formaldehyde consistently disrupted proper DNA locus observations using TetR-FPs. Notably, the foci measured using TetR-mCrimson3 remained close to their original positions in live cells after glyoxal fixation. This in vivo study provides a cell-imaging guide for the use of FPs for gene-locus observation in E. coli and a scheme for evaluating the use of FPs for other cell-imaging purposes.

Toward Sustainable Polymer Materials for Rechargeable Batteries: Utilizing Natural Feedstocks and Recycling/Upcycling of Polymer Waste.

The ever-increasing demand for rechargeable battery systems in the era of electric vehicles has spurred extensive research into developing polymeric components for batteries, such as separators, polymer electrolytes, and binders. However, current battery systems rely on expensive and nonrenewable resources, which potentially have a negative environmental impact. Therefore, polymer materials derived from natural resources have gained significant attention, primarily due to their cost-effective and environmentally sustainable features. Moreover, natural feedstocks often possess highly polar functional groups and high molecular weights, offering desirable electro-chemo-mechanical features when applied as battery materials. More recently, various recycling and upcycling strategies for polymeric battery components have also been proposed given the substantial waste generation from end-of-life batteries. Recycling polymeric materials includes an overall process of recovering the components from spent batteries followed by regeneration into new materials. Polymer upcycling into battery materials involves transforming daily-used plastic waste into high-value-added battery components. This review aims to give a state-of-the-art overview of contemporary methods to develop sustainable polymeric materials and recycling/upcycling strategies for various battery applications.

A highly sensitive and specific real-time quantitative polymerase chain reaction assay for Perkinsus marinus detection in oysters.

Oyster aquaculture is one of the fastest-growing food production industries worldwide; however, it faces a significant challenge from the protist Perkinsus marinus, particularly in the USA. Although several quantitative molecular diagnostic methodologies are available for identifying diseases caused by P. marinus, the primer pairs used therein led to non-specific identification of other Perkinsus spp. Hence, a quantitative real-time PCR (Pm-qPCR) assay specific for P. marinus was developed using a TaqMan-based probe with the internal quencher in this study. A primer pair and probe specific to P. marinus were designed from a hypothetical protein of P. marinus collected from the whole-genome shotgun sequence database of the National Center for Biotechnology Information (NCBI). In silico analysis using homologous sequences of P. olseni and P. chesapeaki confirmed the high specificity of primers designed in this study. The Pm-qPCR assay was performed using seven different strains of P. marinus, P. olseni, and P. chesapeaki, revealing high specificity and sensitivity for detecting only P. marinus strains. In conclusion, it was demonstrated that Pm-qPCR can effectively and accurately diagnose P. marinus with high specificity and sensitivity. This assay is promising for monitoring oyster health and disease management in ecosystems and aquaculture.

Insight into the inhibitory potential of metal complexes supported by (E)-2-morpholino-N-(thiophen-2-ylmethylene)ethanamine: synthesis, structural properties, biological evaluation and docking studies.

A thiophene-derived Schiff base ligand (E)-2-morpholino-N-(thiophen-2-ylmethylene)ethanamine was used for the synthesis of M(II) complexes, [TEM(M)X2] (M = Co, Cu, Zn; X = Cl; M = Cd, X = Br). Structural characterization of the synthesized complexes revealed distorted tetrahedral geometry around the M(II) center. In vitro investigation of the synthesized ligand and its M(II) complexes showed considerable anti-urease and leishmanicidal potential. The synthesized complexes also exhibited a significant inhibitory effect on urease, with IC50 values in the range of 3.50-8.05 µM. In addition, the docking results were consistent with the experimental results. A preliminary study of human colorectal cancer (HCT), hepatic cancer (HepG2), and breast cancer (MCF-7) cell lines showed marked anticancer activities of these complexes.

Size-Dependent Photocatalytic Reactivity of Conjugated Microporous Polymer Nanoparticles.

Particle size is a critical factor for improving photocatalytic reactivity of conjugated microporous polymers (CMPs) as mass transfer in the porous materials is often the rate-limiting step. However, due to the synthetic challenge of controlling the size of CMPs, the impact of particle size is yet to be investigated. To address this problem, a simple and versatile dispersion polymerization route that can synthesize dispersible CMP nanoparticles with controlled size from 15 to 180 nm is proposed. Leveraging the precise control of the size, it is demonstrated that smaller CMP nanoparticles have dramatically higher photocatalytic reactivity in various organic transformations, achieving more than 1000% enhancement in the reaction rates by decreasing the size from 180 to 15 nm. The size-dependent photocatalytic reactivity is further scrutinized using a kinetic model and transient absorption spectroscopy, revealing that only the initial 5 nm-thick surface layer of CMP nanoparticles is involved in the photocatalytic reactions because of internal mass transfer limitations. This finding substantiates the potential of small CMP nanoparticles to efficiently use photo-generated excitons and improve energy-efficiency of numerous photocatalytic reactions.

Accelerating the optimization of vertical flow assay performance guided by a rational systematic model-based approach.

Rapid diagnostic tests (RDTs) have shown to be instrumental in healthcare and disease control. However, they have been plagued by many inefficiencies in the laborious empirical development and optimization process for the attainment of clinically relevant sensitivity. While various studies have sought to model paper-based RDTs, most have relied on continuum-based models that are not necessarily applicable to all operation regimes, and have solely focused on predicting the specific interactions between the antigen and binders. It is also unclear how the model predictions may be utilized for optimizing assay performance. Here, we propose a streamlined and simplified model-based framework, only relying on calibration with a minimal experimental dataset, for the acceleration of assay optimization. We show that our models are capable of recapitulating experimental data across different formats and antigen-binder-matrix combinations. By predicting signals due to both specific and background interactions, our facile approach enables the estimation of several pertinent assay performance metrics such as limit-of-detection, sensitivity, signal-to-noise ratio and difference. We believe that our proposed workflow would be a valuable addition to the toolset of any assay developer, regardless of the amount of resources they have in their arsenal, and aid assay optimization at any stage in their assay development process.

Hairy Conjugated Microporous Polymer Nanoparticles Facilitate Heterogeneous Photoredox Catalysis with Solvent-Specific Dispersibility.

Substrate accessibility is a key limiting factor for the efficiency of heterogeneous photoredox catalysis. Recently, a high photoactive surface area of conjugated microporous polymer nanoparticles (CMP NPs) has made them promising candidates for overcoming the mass transfer limitation to achieve high photocatalytic efficiency. However, this potential has not been realized due to limited dispersibility of CMP NPs in many solvents, particularly in water. Here, we report a polymer grafting strategy that furnishes versatile hairy CMP NPs with enhanced solvent-specific dispersibility. The method associates hundreds of solvent-miscible repeating units with one chain end of the photocatalyst surface, allowing minimal modification to the CMP network that preserves its photocatalytic activity. Therefore, the enhanced dispersibility of hairy CMP NPs in organic solvents or aqueous solutions affords high efficiency in various photocatalytic organic transformations.

Draft Genome Sequence of Desemzia sp. Strain C1, Producing Hydrogen Peroxide, Isolated from Oil-Contaminated Soil.

Here, we report the draft genome sequence of Desemzia sp. strain C1, which was isolated from oil-contaminated soil in South Korea and produces hydrogen peroxide (H2O2). The genome of Desemzia sp. strain C1 contains genes encoding various oxidases involved in H2O2 production and resistance to oxidative stress.

Advantages of deep learning with convolutional neural network in detecting disc displacement of the temporomandibular joint in magnetic resonance imaging.

This study investigated the usefulness of deep learning-based automatic detection of anterior disc displacement (ADD) from magnetic resonance imaging (MRI) of patients with temporomandibular joint disorder (TMD). Sagittal MRI images of 2520 TMJs were collected from 861 men and 399 women (average age 37.33 ± 18.83 years). A deep learning algorithm with a convolutional neural network was developed. Data augmentation and the Adam optimizer were applied to reduce the risk of overfitting the deep-learning model. The prediction performances were compared between the models and human experts based on areas under the curve (AUCs). The fine-tuning model showed excellent prediction performance (AUC = 0.8775) and acceptable accuracy (approximately 77%). Comparing the AUC values of the from-scratch (0.8269) and freeze models (0.5858) showed lower performances of the other models compared to the fine-tuning model. In Grad-CAM visualizations, the fine-tuning scheme focused more on the TMJ disc when judging ADD, and the sparsity was higher than that of the from-scratch scheme (84.69% vs. 55.61%, p < 0.05). The three fine-tuned ensemble models using different data augmentation techniques showed a prediction accuracy of 83%. Moreover, the AUC values of ADD were higher when patients with TMD were divided by age (0.8549-0.9275) and sex (male: 0.8483, female: 0.9276). While the accuracy of the ensemble model was higher than that of human experts, the difference was not significant (p = 0.1987-0.0671). Learning from pre-trained weights allowed the fine-tuning model to outperform the from-scratch model. Another benefit of the fine-tuning model for diagnosing ADD of TMJ in Grad-CAM analysis was the deactivation of unwanted gradient values to provide clearer visualizations compared to the from-scratch model. The Grad-CAM visualizations also agreed with the model learned through important features in the joint disc area. The accuracy was further improved by an ensemble of three fine-tuning models using diversified data. The main benefits of this model were the higher specificity compared to human experts, which may be useful for preventing true negative cases, and the maintenance of its prediction accuracy across sexes and ages, suggesting a generalized prediction.