The joy of the 11th International Fission Yeast Meeting in Hiroshima (POMBE2023 Hiroshima) after a long wait due to the COVID-19 pandemic.

The 11th International Fission Yeast Meeting took place at Astel Plaza in Hiroshima, Japan, from May 28th to June 2nd, 2023. This highly anticipated gathering, originally scheduled for May 2021, had been postponed for 2 years due to the COVID-19 pandemic. Researchers from 21 countries, including 211 overseas and 157 domestic participants (overall gender ratio is roughly 60% male vs. 40% female), eagerly awaited the opportunity to meet in person, as virtual interactions had been the only means of communication during this challenging period. The meeting featured four kick-off special lectures, 101 regular talks, and 152 poster presentations. Additionally, a discussion session on upfront frontier research in fission yeast provided an interactive platform for both speakers and attendees. Throughout the event, participants shared cutting-edge knowledge, celebrated significant research findings, and relished the invaluable experience of an in-person meeting. The vibrant and friendly atmosphere, characteristic of this esteemed international conference, fostered collaboration and reinforced the significance of studying this exceptional model organism. Undoubtedly, the outcomes of this meeting will greatly contribute to our understanding of complex biological systems, not only in fission yeast but also in general eukaryotes.

Effects of the location of both anterior and lateral boundaries of the necrotic lesion on collapse progression in osteonecrosis of the femoral head.

BACKGROUND: The location of the lateral boundary of the necrotic lesion to the weight-bearing portion of the acetabulum (Type classification) is an important factor for collapse in osteonecrosis of the femoral head (ONFH). Recent studies also reported the significance of the location of the anterior boundary of the necrotic lesion on the occurrence of collapse. We aimed to assess the effects of the location of both anterior and lateral boundaries of the necrotic lesion on collapse progression in ONFH. METHODS: We recruited 55 hips with post-collapse ONFH from 48 consecutive patients, who were conservatively followed for more than one year. Using a plain lateral radiograph (Sugioka's lateral view), the location of the anterior boundary of the necrotic lesion to the weight-bearing portion of the acetabulum was classified as follows: Anterior-area I (two hips) occupying the medial one-third or less; Anterior-area II (17 hips) occupying the medial two-thirds or less; and Anterior-area III (36 hips) occupying greater than the medial two-thirds. The amount of femoral head collapse was measured by biplane radiographs at the onset of hip pain and each follow-up period, and Kaplan-Meier survival curves with collapse progression (≥1 mm) as the endpoint were produced. The probability of collapse progression was also assessed by the combination of Anterior-area and Type classifications. RESULTS: Collapse progression was observed in 38 of the 55 hips (69.0%). The survival rate of hips with Anterior-area III/Type C2 was significantly lower. Among hips with Type B/C1, collapse progression occurred more frequently in hips with Anterior-area III (21 of 24 hips) than in hips with Anterior-area I/II (3 of 17 hips, P < 0.0001). CONCLUSIONS: Adding the location of the anterior boundary of the necrotic lesion to Type classification was useful to predict collapse progression especially in hips with Type B/C1.

Isolation and characterization of blackish-brown BY2-melanin accumulated in cultured tobacco BY-2 cells.

The tobacco BY-2 cell line is one of the most utilized plant cell lines. After long-term culture, the cells turn brown to black, but the causal pigment is unknown. We successfully isolated a blackish-brown pigment from BY-2 cells cultured for 3 weeks. Morphological and spectroscopic analyses indicated that the pigment had similar features to a melanin-like substance reported previously. Furthermore, physicochemical analyses revealed that this pigment possessed most of the properties of melanin-like pigments. In addition, the high nitrogen content suggested that it differed from common plant melanins classified as allomelanins, suggesting a novel eumelanin-like pigment: "BY2-melanin". This is the first example showing that eumelanin-like pigments are produced in the cultures of plant cells for which the accumulation of melanin has not been reported. This tobacco BY-2 cell culture technique may represent a customizable and sustainable alternative to conventional melanin production platforms, with significant potential for industrial and pharmacological applications.

Is Anterior Rotation of the Acetabulum Necessary to Normalize Joint Contact Pressure in Periacetabular Osteotomy? A Finite-element Analysis Study.

BACKGROUND: Inappropriate sagittal plane correction can result in an increased risk of osteoarthritis progression after periacetabular osteotomy (PAO). Individual and postural variations in sagittal pelvic tilt, along with acetabular deformity, affect joint contact mechanics in dysplastic hips and may impact the direction and degree of acetabular correction. Finite-element analyses that account for physiologic pelvic tilt may provide valuable insight into the effect of PAO on the contact mechanics of dysplastic hips, which may lead to improved acetabular correction during PAO. QUESTIONS/PURPOSES: We performed virtual PAO using finite-element models with reference to the standing pelvic position to clarify (1) whether lateral rotation of the acetabulum normalizes the joint contact pressure, (2) risk factors for abnormal contact pressure after lateral rotation of the acetabulum, and (3) whether additional anterior rotation of the acetabulum further reduces contact pressure. METHODS: Between 2016 and 2020, 85 patients (92 hips) underwent PAO to treat hip dysplasia. Eighty-two patients with hip dysplasia (lateral center-edge angle < 20°) were included. Patients with advanced osteoarthritis, femoral head deformity, prior hip or spine surgery, or poor-quality images were excluded. Thirty-eight patients (38 hips) were eligible to participate in this study. All patients were women, with a mean age of 39 ± 10 years. Thirty-three women volunteers without a history of hip disease were reviewed as control participants. Individuals with a lateral center-edge angle < 25° or poor-quality images were excluded. Sixteen individuals (16 hips) with a mean age of 36 ± 7 years were eligible as controls. Using CT images, we developed patient-specific three-dimensional surface hip models with the standing pelvic position as a reference. The loading scenario was based on single-leg stance. Four patterns of virtual PAO were performed in the models. First, the acetabular fragment was rotated laterally in the coronal plane so that the lateral center-edge angle was 30°; then, anterior rotation in the sagittal plane was added by 0°, 5°, 10°, and 15°. We developed finite-element models for each acetabular position and performed a nonlinear contact analysis to calculate the joint contact pressure of the acetabular cartilage. The normal range of the maximum joint contact pressure was calculated to be < 4.1 MPa using a receiver operating characteristic curve. A paired t-test or Wilcoxon signed rank test with Bonferroni correction was used to compare joint contact pressures among acetabular positions. We evaluated the association of joint contact pressure with the patient-specific sagittal pelvic tilt and acetabular version and coverage using Pearson or Spearman correlation coefficients. An exploratory univariate logistic regression analysis was performed to identify which of the preoperative factors (CT measurement parameters and sagittal pelvic tilt) were associated with abnormal contact pressure after lateral rotation of the acetabulum. Variables with p values < 0.05 (anterior center-edge angle and sagittal pelvic tilt) were included in a multivariable model to identify the independent influence of each factor. RESULTS: Lateral rotation of the acetabulum decreased the median maximum contact pressure compared with that before virtual PAO (3.7 MPa [range 2.2-6.7] versus 7.2 MPa [range 4.1-14 MPa], difference of medians 3.5 MPa; p < 0.001). The resulting maximum contact pressures were within the normal range (< 4.1 MPa) in 63% of the hips (24 of 38 hips). The maximum contact pressure after lateral acetabular rotation was negatively correlated with the standing pelvic tilt (anterior pelvic plane angle) (ρ = -0.52; p < 0.001) and anterior center-edge angle (ρ = -0.47; p = 0.003). After controlling for confounding variables such as the lateral center-edge angle and sagittal pelvic tilt, we found that a decreased preoperative anterior center-edge angle (per 1°; odds ratio 1.14 [95% CI 1.01-1.28]; p = 0.01) was independently associated with elevated contact pressure (≥ 4.1 MPa) after lateral rotation; a preoperative anterior center-edge angle < 32° in the standing pelvic position was associated with elevated contact pressure (sensitivity 57%, specificity 96%, area under the curve 0.77). Additional anterior rotation further decreased the joint contact pressure; the maximum contact pressures were within the normal range in 74% (28 of 38 hips), 76% (29 of 38 hips), and 84% (32 of 38 hips) of the hips when the acetabulum was rotated anteriorly by 5°, 10°, and 15°, respectively. CONCLUSION: Via virtual PAO, normal joint contact pressure was achieved in 63% of patients by normalizing the lateral acetabular coverage. However, lateral acetabular rotation was insufficient to normalize the joint contact pressure in patients with more posteriorly tilted pelvises and anterior acetabular deficiency. In patients with a preoperative anterior center-edge angle < 32° in the standing pelvic position, additional anterior rotation is expected to be a useful guide to normalize the joint contact pressure. CLINICAL RELEVANCE: This virtual PAO study suggests that biomechanics-based planning for PAO should incorporate not only the morphology of the hip but also the physiologic pelvic tilt in the weightbearing position in order to customize acetabular reorientation for each patient.

Effect of coronal plane acetabular correction on joint contact pressure in Periacetabular osteotomy: a finite-element analysis.

BACKGROUND: The ideal acetabular position for optimizing hip joint biomechanics in periacetabular osteotomy (PAO) remains unclear. We aimed to determine the relationship between acetabular correction in the coronal plane and joint contact pressure (CP) and identify morphological factors associated with residual abnormal CP after correction. METHODS: Using CT images from 44 patients with hip dysplasia, we performed three patterns of virtual PAOs on patient-specific 3D hip models; the acetabulum was rotated laterally to the lateral center-edge angles (LCEA) of 30°, 35°, and 40°. Finite-element analysis was used to calculate the CP of the acetabular cartilage during a single-leg stance. RESULTS: Coronal correction to the LCEA of 30° decreased the median maximum CP 0.5-fold compared to preoperatively (p <  0.001). Additional correction to the LCEA of 40° further decreased CP in 15 hips (34%) but conversely increased CP in 29 hips (66%). The increase in CP was associated with greater preoperative extrusion index (p = 0.030) and roundness index (p = 0.038). Overall, virtual PAO failed to normalize CP in 11 hips (25%), and a small anterior wall index (p = 0.049) and a large roundness index (p = 0.003) were associated with residual abnormal CP. CONCLUSIONS: The degree of acetabular correction in the coronal plane where CP is minimized varied among patients. Coronal plane correction alone failed to normalize CP in 25% of patients in this study. In patients with an anterior acetabular deficiency (anterior wall index < 0.21) and an aspherical femoral head (roundness index > 53.2%), coronal plane correction alone may not normalize CP. Further studies are needed to clarify the effectiveness of multiplanar correction, including in the sagittal and axial planes, in optimizing the hip joint's contact mechanics.

Factors Associated With Abnormal Joint Contact Pressure After Periacetabular Osteotomy: A Finite-Element Analysis.

BACKGROUND: Identifying factors associated with poor hip contact mechanics after periacetabular osteotomy (PAO) may help surgeons optimize acetabular corrections in individual patients. We performed individual-specific finite-element analyses to identify preoperative morphological and surgical correction factors for abnormal contact pressure (CP) after PAO. METHODS: We performed finite-element analyses before and after PAO with reference to the standing pelvic position on individual-specific 3-dimensional hip models created from computed tomography images of 51 dysplastic hips. Nonlinear contact analyses were performed to calculate the joint CP of the acetabular cartilage during a single-leg stance. RESULTS: The maximum CP decreased in 50 hips (98.0%) after PAO compared to preoperative values, and the resulting maximum CP was within the normal range (<4.1 MPa) in 33 hips (64.7%). Multivariate analysis identified the roundness index of the femoral head (P = .002), postoperative anterior center-edge angle (CEA; P = .004), and surgical correction of lateral CEA (Δlateral CEA; P = .003) as independent predictors for abnormal CP after PAO. A preoperative roundness index >54.3°, a postoperative anterior CEA <36.3°, and a Δlateral CEA >27.0° in the standing pelvic position predicted abnormal CP after PAO. CONCLUSION: PAO normalized joint CP in 64.7% of the patients but was less likely to normalize joint CP in patients with aspheric femoral heads. Successful surgical treatment depends on obtaining adequate anterior coverage and avoiding excessive lateral correction, while considering the physiological pelvic tilt in a weight-bearing position.

Pneumatic femoral broaching decreases post-operative subsidence of a cementless taper-wedge stem.

PURPOSE: Stem subsidence is a known cause of early failure in cementless total hip arthroplasty (THA). The aim of this study was to determine the usefulness of pneumatic femoral broaching in preventing post-operative subsidence of a proximally porous-coated, taper-wedge stem. METHODS: We reviewed 169 cases of primary THA with a single taper-wedge stem. Eighty THAs performed using pneumatic broaching were compared with 89 THAs performed using manual broaching in terms of postoperative canal fill ratio (CFR) at three levels, stem subsidence at one year post-operation, and stem fixation at latest follow-up (median, 24 months). RESULTS: The median CFRs were higher in the pneumatic group than in the manual group at all levels (p < 0.05). The median stem subsidence at one year after THA was lower in the pneumatic group than in the manual group (0.2 mm vs. 0.6 mm, p = 0.007). A multivariate analysis determined a decreased CFR at 60 mm below the lesser trochanter and the manual broaching as independent factors affecting post-operative stem subsidence. At the latest follow-up, all stems showed stable fixation by bone ingrowth in both groups. CONCLUSION: Our results showed that the pneumatic broaching device was useful in maximizing the mediolateral canal filling and initial stability and minimizing the subsidence of taper-wedge stems.

Reliable imaging of ATP in living budding and fission yeast.

Adenosine triphosphate (ATP) is a main metabolite essential for all living organisms. However, our understanding of ATP dynamics within a single living cell is very limited. Here, we optimized the ATP-biosensor QUEEN and monitored the dynamics of ATP with good spatial and temporal resolution in living yeasts. We found stable maintenance of ATP concentration in wild-type yeasts, regardless of carbon sources or cell cycle stages, suggesting that mechanism exists to maintain ATP at a specific concentration. We further found that ATP concentration is not necessarily an indicator of metabolic activity, as there is no clear correlation between ATP level and growth rates. During fission yeast meiosis, we found a reduction in ATP levels, suggesting that ATP homeostasis is controlled by differentiation. The use of QUEEN in yeasts offers an easy and reliable assay for ATP dynamicity and will answer several unaddressed questions about cellular metabolism in eukaryotes.

Does Patient-specific Functional Pelvic Tilt Affect Joint Contact Pressure in Hip Dysplasia? A Finite-element Analysis Study.

BACKGROUND: Although individual and postural variations in the physiologic pelvic tilt affect the acetabular orientation and coverage in patients with hip dysplasia, their effect on the mechanical environment in the hip has not been fully understood. Individual-specific, finite-element analyses that account for physiologic pelvic tilt may provide valuable insight into the contact mechanics of dysplastic hips, which can lead to further understanding of the pathogenesis and improved treatment of this patient population. QUESTION/PURPOSE: We used finite-element analysis to ask whether there are differences between patients with hip dysplasia and patients without dysplasia in terms of (1) physiologic pelvic tilt, (2) the pelvic position and joint contact pressure, and (3) the morphologic factors associated with joint contact pressure. METHODS: Between 2016 and 2019, 82 patients underwent pelvic osteotomy to treat hip dysplasia. Seventy patients with hip dysplasia (lateral center-edge angle ≥ 0° and < 20° on supine AP pelvic radiographs) were included. Patients with advanced osteoarthritis, femoral head deformity, prior hip or supine surgery, or poor-quality imaging were excluded. Thirty-two patients (32 hips) were eligible to this finite-element analysis study. For control groups, we reviewed 33 female volunteers without a history of hip disease. Individuals with frank or borderline hip dysplasia (lateral center-edge angle < 25°) or poor-quality imaging were excluded. Sixteen individuals (16 hips) were eligible as controls. Two board-certified orthopaedic surgeons measured sagittal pelvic tilt (the angle between the anterior pelvic plane and vertical axis: anterior pelvic plane [APP] angle) and acetabular version and coverage using pelvic radiographs and CT images. Intra- and interobserver reliabilities, evaluated using the kappa value and intraclass correlation coefficient, were good or excellent. We developed individual-specific, finite-element models using pelvic CT images, and performed nonlinear contact analysis to calculate the joint contact pressure on the acetabular cartilage during the single-leg stance with respect to three pelvic positions: standardized (anterior pelvic plane), supine, and standing. We compared physiologic pelvic tilt between patients with and without dysplasia using a t-test or the Wilcoxon rank sum test. A paired t-test or the Wilcoxon signed rank test with a Bonferroni correction was used to compare joint contact pressure between the three pelvic positions. We correlated joint contact pressure with morphologic parameters and pelvic tilt using the Pearson or the Spearman correlation coefficients. RESULTS: The APP angle in the supine and standing positions varied widely among individuals. It was greater in patients with hip dysplasia than in patients in the control group when in the standing position (3° ± 6° versus -2° ± 8°; mean difference 5° [95% CI 1° to 9°]; p = 0.02) but did not differ between the two groups when supine (8° ± 5° versus 5° ± 7°; mean difference 3° [95% CI 0° to 7°]; p = 0.06). The mean pelvic tilt was 6° ± 5° posteriorly when shifting from the supine to the standing position in patients with hip dysplasia. The median (range) maximum contact pressure was higher in dysplastic hips than in control individuals (in standing position; 7.3 megapascals [MPa] [4.1 to 14] versus 3.5 MPa [2.2 to 4.4]; difference of medians 3.8 MPa; p < 0.001). The median maximum contact pressure in the standing pelvic position was greater than that in the supine position in patients with hip dysplasia (7.3 MPa [4.1to 14] versus 5.8 MPa [3.5 to 12]; difference of medians 1.5 MPa; p < 0.001). Although the median maximum joint contact pressure in the standardized pelvic position did not differ from that in the standing position (7.4 MPa [4.3 to 15] versus 7.3 MPa [4.1 to 14]; difference of medians -0.1 MPa; p > 0.99), the difference in the maximum contact pressure varied from -3.3 MPa to 2.9 MPa, reflecting the wide range of APP angles (mean 3° ± 6° [-11° to 14°]) when standing. The maximum joint contact pressure in the standing position was negatively correlated with the standing APP angle (r = -0.46; p = 0.008) in patients with hip dysplasia. CONCLUSION: Based on our findings that individual and postural variations in the physiologic pelvic tilt affect joint contact pressure in the hip, future studies on the pathogenesis of hip dysplasia and joint preservation surgery should not only include the supine or standard pelvic position, but also they need to incorporate the effect of the patient-specific pelvic tilt in the standing position on the biomechanical environment of the hip. CLINICAL RELEVANCE: We recommend assessing postural change in sagittal pelvic tilt when diagnosing hip dysplasia and planning preservation hip surgery because assessment in a supine or standard pelvic position may overlook alterations in the hip's contact mechanics in the weightbearing positions. Further studies are needed to elucidate the effect of patient-specific functional pelvic tilt on the degeneration process of dysplastic hips, the acetabular reorientation maneuver, and the clinical result of joint preservation surgery.

Preoperative Rather Than Postoperative Intra-Articular Cartilage Degeneration Affects Long-Term Survivorship of Periacetabular Osteotomy.

PURPOSE: To determine whether intra-articular lesions changed in short-term follow-up after periacetabular osteotomy (PAO) and whether the intra-articular lesion changes impacted the long-term survivorship of PAO. METHODS: We reviewed patients with hip dysplasia who underwent PAO with arthroscopic observation between 1990 and 2001. Patients who underwent second-look arthroscopy were included. The correlations between the intra-articular lesion changes and the long-term outcome of PAO were analyzed for patients with >10 years of follow-up. The possible risk factors included demographic factors (age, sex, and body mass index), radiographic factors (Tönnis grade, lateral center-edge angle, Tönnis angle, acetabular head index, crossover sign, posterior wall sign, and joint congruity), and arthroscopic findings (full-thickness lesions at the time of PAO and lesions changes at the time of second-look arthroscopy). RESULTS: A total of 64 patients (72 hips) were studied. Second-look arthroscopy was performed at a median of 1.4 years after PAO. Intra-articular lesions were observed in 93% in the acetabulum, 81% in the femoral head, and 97% in the labrum, respectively. These lesions unchanged in 74% in the acetabulum, 76% in the femoral head, and 79% in the labrum, respectively. Cartilage repair was observed in the acetabulum and the femoral head in 24% and 17% of hips, respectively. Labral repair occurred in 10%. Intra-articular lesion changes were not a predictor of failure. Multivariate analysis identified International Cartilage Repair Society grade 4 lesion in the femoral head as an independent risk factor for failure. CONCLUSIONS: Our results suggest that PAO prevents further deterioration in mild cartilage lesions and results in cartilage repair in some cases with advanced cartilage degenerations in the short term. However, these postoperative changes were not associated with long-term survivorship. Thus, appropriate surgical indications based on the preoperative intra-articular cartilage degeneration is paramount to achieving long-term success in PAO. LEVEL OF EVIDENCE: Level IV, therapeutic study.

Is lateral acetabular rotation sufficient to correct anterolateral deficiency in periacetabular reorientation osteotomy? A CT-Based simulation study.

BACKGROUND: Residual acetabular deficiency after periacetabular reorientation osteotomy can result in suboptimal outcome. The optimal algorithm of acetabular fragment correction to achieve normal anterolateral acetabular coverage is not well characterized. The aim of this study was to determine the prevalence of residual anterolateral deficiency after lateral acetabular rotation and to evaluate the ability of additional sagittal and axial rotation of the acetabulum to normalize the acetabular coverage in periacetabular osteotomy. METHODS: We performed computed tomography-based simulated periacetabular osteotomy on 85 patients (85 hips) with hip dysplasia. The acetabular fragment was rotated laterally to achieve a lateral center-edge angle (CEA) of 30°. For hips with residual anterolateral deficiency, which were identified based on the reference interval of the anterior CEA, the acetabulum was further rotated in the sagittal or axial direction in 5-degree increments from 5° to 20°, and the ability of these two manoeuvres to restore a normal anterior CEA was assessed. RESULTS: After lateral acetabular rotation, 16 hips (19%) had residual anterolateral deficiency, 67 hips (79%) had normal acetabular coverage, and 2 hips (2.4%) had acetabular overcoverage. A preoperative anterior CEA <37° predicted residual deficiency (sensitivity, 94%; specificity, 81%). Additional anterior sagittal rotation was more effective than posterior axial rotation in normalizing the anterior CEA, while minimizing the decrease in posterior CEA. The highest number of hips with normal anterior and posterior CEA was noted at 10° sagittal rotation (81%), which was followed by 15° sagittal rotation (63%). CONCLUSIONS: Normal anterolateral coverage was achieved in 79% of patients after rotating the acetabulum laterally. However, lateral rotation of the acetabulum may be insufficient to correct the anterolateral deficiency in patients with an anterior CEA of <37°. In them, additional 10°-15° anterior sagittal rotation may be appropriate to achieve sufficient anterolateral coverage while retaining posterolateral coverage.

Modified lateralized head sign: An accurate marker in diagnosing adult hip dysplasia.

BACKGROUND: Although lateralized head sign (LHS) is considered indicative of structural instability, it lacks reproducibility, and its usefulness in diagnosing adult hip dysplasia is unknown. In this study, we proposed a modified LHS and aimed to determine its reliability and accuracy in diagnosing adult hip dysplasia. METHODS: We reviewed anteroposterior pelvic radiographs of 94 patients (134 hips) with hip dysplasia. As controls, 133 normal hips were evaluated. We defined the modified lateralization distance (LD) as the horizontal distance between the medial aspect of the femoral head to the acetabular fossa. The sensitivity, specificity, and cutoff value of modified LD in diagnosing hip dysplasia were calculated using receiver operating characteristic curve analysis. RESULTS: The sensitivity and specificity of the modified LD (79% and 87%, respectively) were higher than those of the conventional LD (63% and 80%, respectively). Diagnostic accuracy was further improved when patients were divided on the basis of sex. The sensitivity and specificity of the modified LD in men were 89% and 97%, respectively, with a cutoff value of 12 mm, while in women, they were 80% and 96%, respectively, with a cutoff value of 9.7 mm. Therefore, we defined the modified LHS as presentation with a modified LD ≥ 12 mm in men and ≥10 mm in women. Between three observers, the kappa value for intraobserver reliability was ≥0.9, while that for interobserver reliability was >0.8. The mean sensitivity and specificity of the modified LHS in diagnosing hip dysplasia were 85% and 99%, respectively. CONCLUSIONS: Modified LHS-a horizontal distance between the medial aspect of the femoral head and the acetabular fossa ≥12 mm in men and ≥10 mm in women-is a clinically useful marker in detecting lateral femoral head subluxation indicative of hip dysplasia or structural hip instability.

Spindle pole body movement is affected by glucose and ammonium chloride in fission yeast.

The complexity of chromatin dynamics is orchestrated by several active processes. In fission yeast, the centromeres are clustered around the spindle pole body (SPB) and oscillate in a microtubule- and adenosine triphosphate (ATP)-dependent manner. However, whether and how SPB oscillation are affected by different environmental conditions remain poorly understood. In this study, we quantitated movements of the SPB component, which colocalizes with the centromere in fission yeast. We found that SPB movement was significantly reduced at low glucose concentrations. Movement of the SPB was also affected by the presence of ammonium chloride. Power spectral analysis revealed that periodic movement of the SPB is disrupted by low glucose concentrations. Measurement of ATP levels in living cells by quantitative single-cell imaging suggests that ATP levels are not the only determinant of SPB movement. Our results provide novel insight into how SPB movement is regulated by cellular energy status and additional factors such as the medium nutritional composition.

Does Acetabular Coverage Vary Between the Supine and Standing Positions in Patients with Hip Dysplasia?

BACKGROUND: Although variation in physiologic pelvic tilt may affect acetabular version and coverage, postural change in pelvic tilt in patients with hip dysplasia who are candidates for hip preservation surgery has not been well characterized, and its clinical importance is unknown. QUESTIONS/PURPOSES: The aim of this study was to determine (1) postural changes in sagittal pelvic tilt between the supine and standing positions; (2) postural changes in the acetabular orientation and coverage of the femoral head between the supine and standing positions; and (3) patient demographic and morphologic factors associated with sagittal pelvic tilt. METHODS: Between 2009 and 2016, 102 patients underwent pelvic osteotomy to treat hip dysplasia. All patients had supine and standing AP pelvic radiographs and pelvic CT images taken during their preoperative examination. Ninety-five patients with hip dysplasia (lateral center-edge angle < 20°) younger than 60 years old were included. Patients with advanced osteoarthritis, other hip disease, prior hip or spine surgery, femoral head deformity, or inadequate imaging were excluded. Sixty-five patients (64%) were eligible for participation in this retrospective study. Two board-certified orthopaedic surgeons (TT and MF) investigated sagittal pelvic tilt, spinopelvic parameters, and acetabular version and coverage using pelvic radiographs and CT images. Intra- and interobserver reliabilities, evaluated using the intraclass correlation coefficient (0.90 to 0.98, 0.93 to 0.99, and 0.87 to 0.96, respectively), were excellent. Demographic data (age, gender, and BMI) were collected by medical record review. Sagittal pelvic tilt was quantified as the angle formed by the anterior pelvic plane and a z-axis (anterior pelvic plane angle). Using a 2D-3D matching technique, we measured the change in sagittal pelvic tilt, acetabular version, and three-dimensional coverage between the supine and standing positions. We correlated sagittal pelvic tilt with demographic and CT measurement parameters using Pearson's or Spearman's correlation coefficients. RESULTS: Although functional pelvic tilt varied widely among individuals, the pelvis of patients with hip dysplasia tilted posteriorly from the supine to the standing position (mean APP angle 8° ± 6° versus 2° ± 7°; mean difference -6°; 95% CI, -7° to -5°; range -17° to 4.1°; p < 0.001; paired t-test).The pelvis tilted more than 5° posteriorly from the supine to the standing position in 39 patients (60%), and the change was greater than 10° in 12 (18%). In the latter subgroup of patients, the mean acetabular anteversion angle increased (22° ± 5° versus 27° ±5°; mean difference 5°; 95% CI, 4°-6°; p < 0.001) and the mean anterosuperior acetabular sector angle notably deceased from the supine to the standing position (91° ± 11° versus 77° ± 14°; mean difference -14°; 95% CI, -17° to -11°; p < 0.001; paired t-test). Postural change in pelvic tilt was not associated with any of the studied demographic or morphologic parameters, including patient age, gender, BMI, and acetabular version and coverage. CONCLUSIONS: On average, the pelvis tilted posteriorly from the supine to the standing position in patients with hip dysplasia, resulting in increased acetabular version and decreased anterosuperior acetabular coverage in the standing position. Thus, assessment with a supine AP pelvic radiograph may overlook changes in acetabular version and coverage in weightbearing positions. We recommend assessing postural change in sagittal pelvic tilt when diagnosing hip dysplasia and planning hip preservation surgery. Further studies are needed to determine how postural changes in sagittal pelvic tilt affect the biomechanical environment of the hip and the clinical results of acetabular reorientation osteotomy. LEVEL OF EVIDENCE: Level IV, diagnostic study.

Critical role of the proton-dependent oligopeptide transporter (POT) in the cellular uptake of the peptidyl nucleoside antibiotic, blasticidin S.

Blasticidin S (BlaS) interferes in the cell growth of both eukaryotes and prokaryotes. Its mode of action as a protein synthesis inhibitor has been investigated extensively. However, the mechanism of BlaS transport into the target cells is not understood well. Here, we show that Ptr2, a member of the proton-dependent oligopeptide transporter (POT) family, is responsible for the uptake of BlaS in yeasts Schizosaccharomyces pombe and Saccharomyces cerevisiae. Notably, some mutants of Ptr2 that are dysfunctional in dipeptide uptake were still competent to transport BlaS. Mouse-derived oligopeptide transporter PepT1 conferred BlaS sensitivity in the S. cerevisiae ptr2∆ mutant. Furthermore, bacterial POT family proteins also potentiated the BlaS sensitivity of E. coli. The role of the POT family oligopeptide transporters in the uptake of BlaS is conserved across species from bacteria to mammals.

The benefits and risks of expressing the POT and FOT family of oligopeptide transporters in Saccharomyces cerevisiae.

In the yeast Saccharomyces cerevisiae, all strains possess a gene for the evolutionarily conserved POT family peptide transporter, Ptr2; however, the genes for a novel FOT family transporter were found only in some wine brewing strains. The substrate specificity of the POT and FOT family of transporters was compared. Among the naturally occurring oligopeptides that were tested, Lys-Leu and Arg-Phe were Ptr2-specific substrates. Artificial dipeptide aspartame was imported specifically through the FOT transporter, but the structurally similar Asp-Phe was a substrate of both FOT and Ptr2 transporters. Furthermore, only the FOT transporter was important for high sensitivity to an antibiotic puromycin. These results demonstrate that the POT and FOT family of transporters have distinct substrate preferences although both transporters import overlapping dipeptide substrates. Having POT and FOT transporters is advantageous for cells to acquire nutrients, but also detrimental when these cells are exposed to the toxic molecules of their substrates.

Inhibition of the Arg/N-end rule pathway-mediated proteolysis by dipeptide-mimetic molecules.

Ubr11 in the fission yeast Schizosaccharomyces pombe is an evolutionarily conserved ubiquitin ligase functioning in the Arg/N-end rule pathway, which promotes degradation of substrate proteins via the proteasome. Ubr11 recognizes the N-degron sequence in substrates. The primary N-degron contains a destabilization-inducing N-terminal amino acid, which is either a basic (type 1) or bulky hydrophobic (type 2) residue. Dipeptides are known to inhibit proteolytic degradation via the Arg/N-end rule pathway. Here, I examined the potency of some amino acid- or dipeptide-related molecules in their inhibition of Ubr11/N-end rule-mediated degradation. An amide form of L-arginine and L-tryptophan had weak inhibitory activity for type 1 and type 2 substrates, respectively, although the unmodified amino acid monomer and its carboxymethylated ester were ineffective. Among the naturally occurring dipeptides tested, Lys-Leu and Tyr-Leu showed potent inhibitory activity, but their effect was transient, especially at submillimolar concentrations. L-arginine-ß-naphthylamide (Arg-ßNA) showed stronger activity than several dipeptides for type 1 substrates, but all Lys-Leu, Tyr-Leu, and Arg-ßNA caused growth retardation. The inhibitory activity of the L-phenylalanine carbobenzoxy-hydrazide for type 2 substrates was not very strong, but it prolonged the action of Tyr-Leu at low concentrations and, importantly, did not interfere with cell growth. Apart from their utility, these dipeptidomimetics provide a clue for understanding the determinants of recognition by Ubr ubiquitin ligase and further designing novel inhibitors of the Arg/N-end rule pathway.

Plasmon-driven surface catalysis on photochemically deposited-based SERS substrates.

For the virtues of convenience and repeatability, photochemically deposited nanoparticles (NPs) as ferroelectric-based surface-enhanced Raman scattering (SERS) substrates have great potential in the surface-plasmon-related applications. In this work, the plasmon-driven surface catalysis (PDSC) reaction is investigated on lithium niobate (LiNbO3) film with photochemically deposited Au NPs. The SERS spectra indicate that the performance of PDSC reaction on a substrate with various Au3+ concentrations in photochemical deposition is obviously different. Combining structure characterization and electromagnetic field simulation, this result is mainly attributed to the surface plasmon coupling between Au NPs. Furthermore, the results also point out that the exposure time in photochemical deposition plays an important role in PDSC reactions. Our studies on photochemically deposited Au NP substrates provide strong support and further understanding to the research on PDSC reactions and also to other surface-plasmon-related fields.

The essential function of Rrs1 in ribosome biogenesis is conserved in budding and fission yeasts.

The Rrs1 protein plays an essential role in the biogenesis of 60S ribosomal subunits in budding yeast (Saccharomyces cerevisiae). Here, we examined whether the fission yeast (Schizosaccharomyces pombe) homologue of Rrs1 also plays a role in ribosome biogenesis. To this end, we constructed two temperature-sensitive fission yeast strains, rrs1-D14/22G and rrs1-L51P, which had amino acid substitutions corresponding to those of the previously characterized budding yeast rrs1-84 (D22/30G) and rrs1-124 (L61P) strains, respectively. The fission yeast mutants exhibited severe defects in growth and 60S ribosomal subunit biogenesis at high temperatures. In addition, expression of the Rrs1 protein of fission yeast suppressed the growth defects of the budding yeast rrs1 mutants at high temperatures. Yeast two-hybrid analyses revealed that the interactions of Rrs1 with the Rfp2 and Ebp2 proteins were conserved in budding and fission yeasts. These results suggest that the essential function of Rrs1 in ribosome biogenesis may be conserved in budding and fission yeasts.

Temperature-controlled picosecond-pulsed high frequency second-harmonic generation by a periodically poled stoichiometric LiTaO(3).

We report experimental results of second-harmonic (SH) generation (SHG) by a quasi-phase-matched periodically poled Mg-doped stoichiometric LiTaO(3) crystal for 1030 nm input radiation of 18 ps pulse duration, within the range of peak input laser intensity I = 0.1-9.5 GW/cm(2) and under repetition rate 10-20 kHz. For I>3 GW/cm(2) SHG efficiency achieves the saturation level of η≈0.35 which can be maintained within a wide range of I = 3-9.5 GW/cm(2). The loss of SHG efficiency observed for I>5 GW/cm(2) can be recovered to the level of η≈0.35 by using temperature-controlled operation. By applying our experimental data we find the value of two-photon absorption (TPA) coefficient for 515 nm radiation, ß≈1.1-2.7 cm/GW, agreeing well with the theoretical estimate ß≈2.6 cm/GW. Our analysis suggests that the inhibition of SHG efficiency, its saturation and stabilization are due to a combined mechanism including: (i) non-steady-state ps effect scaled by ≈ζ(-2)[1-exp(-ζ)](2) as compared with the efficiency for ns pulsed operation (ζ = L/V2τP , L is the crystal length, τP is the pulse duration and V(2) is the group velocity of SH); (ii) dephasing caused by the spectral bandwidth of the input radiation (≈300 GHz); (iii) thermal dephasing caused by TPA of SH; and (iv) strong SH attenuation by TPA of order ≈I(2) (-1)dI2/dz≈-(0.8-8) cm(-1) for I = 1-9.5 GW/cm(2).