RESUMO
A reliable, but cost-effective generation of single-photon states is key for practical quantum communication systems. For real-world deployment, waveguide sources offer optimum compatibility with fiber networks and can be embedded in hybrid integrated modules. Here, we present what we believe to be the first chip-size fully integrated fiber-coupled heralded single photon source (HSPS) module based on a hybrid integration of a nonlinear lithium niobate waveguide into a polymer board. Photon pairs at 810â nm (signal) and 1550â nm (idler) are generated via parametric down-conversion pumped at 532â nm in the LiNbO3 waveguide. The pairs are split in the polymer board and routed to separate output ports. The module has a size of (2 × 1)â cm2 and is fully fiber-coupled with one pump input fiber and two output fibers. We measure a heralded second-order correlation function of g h(2)=0.05 with a heralding efficiency of η h=3.5% at low pump powers.
RESUMO
For wireless networks beyond 5G, directivity and reconfigurability of antennas are highly relevant. Therefore, we propose a linear antenna array based on photodiodes operating at 300 GHz, and an optical phased array based on polymer waveguides to orchestrate the antennas. Due to its low thermal conductivity and high thermo-optical coefficient, the polymer chip enables highly efficient and crosstalk-free phase shifting. With these, we demonstrate purely photonic-controlled beam steering across 20°. Compared to a single emitter, the 3-dB beam width is reduced by 8.5° to 22.5° and the output power is >10 dB higher. Employing Snell's law for coupling into air, we can precisely predict the radiation patterns.
RESUMO
In this Letter, we experimentally demonstrate a monolithic integration of two vertically rolled-up microtube resonators (VRUMs) on polymer-based 1×5 multimode interference waveguides to achieve 3D multi-channel coupling. In this configuration, different sets of resonant modes are simultaneously excited at S-, C-, and L- telecom bands, demonstrating an on-chip multiplexing, based on a vertical-coupling configuration. Moreover, the resonant wavelength tuning and consequently the overlapping of resonant modes are accomplished via covering the integrated VRUMs by liquid. A maximum sensitivity of 330 nm/refractive index unit is achieved. The present work would be a critical step for the realization of massively parallel optofluidic sensors with higher sensitivity and flexibility for signal processing, particularly in a 3D-integrated photonic chip.
RESUMO
Microtubular optical resonators are monolithically integrated on photonic chips to demonstrate optofluidic functionality. Due to the compact subwavelength-thin tube wall and a well-defined nanogap between polymer photonic waveguides and the microtube, excellent optical coupling with extinction ratios up to 32 dB are observed in the telecommunication relevant wavelength range. For the first time, optofluidic applications of fully on-chip integrated microtubular systems are investigated both by filling the core of the microtube and by the microtube being covered by a liquid droplet. Total shifts over the full free spectral range are observed in response to the presence of the liquid medium in the vicinity of the microtube resonators. This work provides a vertical coupling scheme for optofluidic applications in monolithically integrated so-called "lab-in-a-tube" systems.
RESUMO
We present a fiber-coupled transceiver for THz time-domain spectroscopy, which combines an emitter and a receiver on a single photoconductive chip. With a bandwidth of 4.5 THz and a peak dynamic range larger than 70 dB, it allows for THz reflection measurements under normal incidence. This THz reflection head is a promising device for applications in such fields as material inspection and nondestructive testing.
RESUMO
We demonstrate full integration of vertical optical ring resonators with silicon nanophotonic waveguides on silicon-on-insulator substrates to accomplish a significant step toward 3D photonic integration. The on-chip integration is realized by rolling up 2D differentially strained TiO(2) nanomembranes into 3D microtube cavities on a nanophotonic microchip. The integration configuration allows for out-of-plane optical coupling between the in-plane nanowaveguides and the vertical microtube cavities as a compact and mechanically stable optical unit, which could enable refined vertical light transfer in 3D stacks of multiple photonic layers. In this vertical transmission scheme, resonant filtering of optical signals at telecommunication wavelengths is demonstrated based on subwavelength thick-walled microcavities. Moreover, an array of microtube cavities is prepared, and each microtube cavity is integrated with multiple waveguides, which opens up interesting perspectives toward parallel and multi-routing through a single-cavity device as well as high-throughput optofluidic sensing schemes.
RESUMO
An external cavity laser is demonstrated based on the hybrid integration of an InP-based gain element, a half-wave plate, and thermally drivable polymer waveguide circuits. The laser has one oscillation region but two outputs for TE and TM emissions. The central wavelength can be tuned 20 nm at 20 mW heater electrical power. The TM path undergoes a 1.4 dB power penalty due to the presence of the half-wave plate. However, the on-chip thermo-optic switch (TOS) can compensate for this imbalance and steer the laser into an equal TE and TM output power. The TOS can also be adjusted to prefer one polarization path over the other with â¼10 dB extinction ratio.
RESUMO
Mass-deployable implementations for quantum communication require compact, reliable, and low-cost hardware solutions for photon generation, control and analysis. We present a fiber-pigtailed hybrid photonic circuit comprising nonlinear waveguides for photon-pair generation and a polymer interposer reaching 68 dB of pump suppression and photon separation based on a polarizing beam splitter with > 25 dB polarization extinction ratio. The optical stability of the hybrid assembly enhances the quality of the entanglement, and the efficient background suppression and photon routing further reduce accidental coincidences. We thus achieve a 96 - 8 + 3 % concurrence and a 96 - 5 + 2 % fidelity to a Bell state. The generated telecom-wavelength, time-bin entangled photon pairs are ideally suited for distributing Bell pairs over fiber networks with low dispersion.
RESUMO
A lab-on-a-chip multichannel sensing platform for biomedical analysis based on optical silicon nitride (SiNx) microring-resonators (MRR) was established. The resonators were surface functionalized and finally combined with a microfluidic chamber for validation using an avidin-biotin ligand-binding assay. The results with a limit of detection (LOD) of 2.3â10-5 and a mean intra-assay coefficient of variation (CV) of ±10.0 %, also under consideration of FDA guidelines, show promising future applicability for a wide variety of targets in the field of outpatient medical diagnostics and life science.Clinical Relevance- Biomarkers play a crucial role in physiological processes of the human body. To enable instantaneous and decentralized analysis of these markers, systems are needed that can be used in a laboratory-independent environment with minimal amounts of biofluid. An example is the utilization of such systems for neonates or infants.
Assuntos
Técnicas Biossensoriais , Óptica e Fotônica , Recém-Nascido , Humanos , Técnicas Biossensoriais/métodos , Fótons , Compostos de SilícioRESUMO
We fabricated a simple sensor system for qualitative analysis of glycan-mediated interactions. Our main aim was to establish a ronbbust system that allowes drop-tests without complex fluidics. The test system should be usable in routine analytics in the future and bear sufficient sensitivity to detect binding events in the nanomolar range. For this, we employed optical ring resonators and coated them with high avidity glycopolymers based on N-acetylglucosamine (GlcNAc). These hydrophilic polymers are also very feasible in preventing unspecific protein adsorption. Drop-on binding studies with suitable lectins showed that glycopolymers were specifically recognized by a lectin with GlcNAc-specificity and prevented unspecific protein interactions very well. The system could be elaborated in the future for detection of glycan-mediated interactions in the biomedical field and is promising in means of multiplexed analysis and usage in routine analysis.