POLCAM: instant molecular orientation microscopy for the life sciences.

Current methods for single-molecule orientation localization microscopy (SMOLM) require optical setups and algorithms that can be prohibitively slow and complex, limiting widespread adoption for biological applications. We present POLCAM, a simplified SMOLM method based on polarized detection using a polarization camera, which can be easily implemented on any wide-field fluorescence microscope. To make polarization cameras compatible with single-molecule detection, we developed theory to minimize field-of-view errors, used simulations to optimize experimental design and developed a fast algorithm based on Stokes parameter estimation that can operate over 1,000-fold faster than the state of the art, enabling near-instant determination of molecular anisotropy. To aid in the adoption of POLCAM, we developed open-source image analysis software and a website detailing hardware installation and software use. To illustrate the potential of POLCAM in the life sciences, we applied our method to study α-synuclein fibrils, the actin cytoskeleton of mammalian cells, fibroblast-like cells and the plasma membrane of live human T cells.

Cardiac forces regulate zebrafish heart valve delamination by modulating Nfat signaling.

In the clinic, most cases of congenital heart valve defects are thought to arise through errors that occur after the endothelial-mesenchymal transition (EndoMT) stage of valve development. Although mechanical forces caused by heartbeat are essential modulators of cardiovascular development, their role in these later developmental events is poorly understood. To address this question, we used the zebrafish superior atrioventricular valve (AV) as a model. We found that cellularized cushions of the superior atrioventricular canal (AVC) morph into valve leaflets via mesenchymal-endothelial transition (MEndoT) and tissue sheet delamination. Defects in delamination result in thickened, hyperplastic valves, and reduced heart function. Mechanical, chemical, and genetic perturbation of cardiac forces showed that mechanical stimuli are important regulators of valve delamination. Mechanistically, we show that forces modulate Nfatc activity to control delamination. Together, our results establish the cellular and molecular signature of cardiac valve delamination in vivo and demonstrate the continuous regulatory role of mechanical forces and blood flow during valve formation.

Push-Pull Fluorescent Dyes with Trifluoroacetyl Acceptor for High-Fidelity Sensing of Polarity and Heterogeneity of Lipid Droplets.

Imaging and sensing of lipid droplets (LDs) attracted significant attention due to growing evidence for their important role in cell life. Solvatochromic dyes are promising tools to probe LDs' local polarity, but this analysis is biased by their non-negligible emission from intracellular membranes and capacity to emit from both the apolar core and polar interface of LDs. Here, we developed two push-pull solvatochromic dyes based on naphthalene and fluorene cores bearing an exceptionally strong electron acceptor, the trifluoroacetyl group. The latter was found to boost the optical properties of the dyes by shifting their absorption and emission to red and increasing their extinction coefficient, photostability, and sensitivity to solvent polarity (solvatochromism). In contrast to classical solvatochromic dyes, such as parent aldehydes and reference Nile Red, the new dyes exhibited strong fluorescence quenching by millimolar water concentrations in organic solvents. In live cells, the trifluoroacetyl dyes exhibited high specificity to LDs, whereas the parent aldehydes and Nile Red showed a detectable backgrounds from intracellular membranes. Experiments in model lipid membranes and nanoemulsion droplets confirmed the high selectivity of new probes to LDs in contrast to classical solvatochromic dyes. Moreover, the new probes were found to be selective to the LDs oil core, where they can sense lipid unsaturation and chain length. Their ratiometric imaging in cells revealed strong heterogeneity in polarity within LDs, which covered the range of polarities of unsaturated triglyceride oils, whereas Nile Red failed to properly estimate the local polarity of LDs. Finally, the probes revealed that LDs core polarity can be altered by fatty acid diets, which correlates with their chain length and unsaturation.

Direct Zeptomole Detection of RNA Biomarkers by Ultrabright Fluorescent Nanoparticles on Magnetic Beads.

Nucleic acids are important biomarkers in cancer and viral diseases. However, their ultralow concentration in biological/clinical samples makes direct target detection challenging, because it leads to slow hybridization kinetics with the probe and its insufficient signal-to-noise ratio. Therefore, RNA target detection is done by molecular (target) amplification, notably by RT-PCR, which is a tedious multistep method that includes nucleic acid extraction and reverse transcription. Here, a direct method based on ultrabright dye-loaded polymeric nanoparticles in a sandwich-like hybridization assay with magnetic beads is reported. The ultrabright DNA-functionalized nanoparticle, equivalent to ≈10 000 strongly emissive rhodamine dyes, is hybridized with the magnetic bead to the RNA target, providing the signal amplification for the detection. This concept (magneto-fluorescent sandwich) enables high-throughput detection of DNA and RNA sequences of varied lengths from 48 to 1362 nt with the limit of detection down to 0.3 fm using a plate reader (15 zeptomoles), among the best reported for optical sandwich assays. Moreover, it allows semi-quantitative detection of SARS-CoV-2 viral RNA directly in clinical samples without a dedicated RNA extraction step. The developed technology, combining ultrabright nanoparticles with magnetic beads, addresses fundamental challenges in RNA detection; it is expected to accelerate molecular diagnostics of diseases.

Fluorescent Probes for Lipid Membranes: From the Cell Surface to Organelles.

Biomembranes are ubiquitous lipid structures that delimit the cell surface and organelles and operate as platforms for a multitude of biomolecular processes. The development of chemical tools─fluorescent probes─for the sensing and imaging of biomembranes is a rapidly growing research direction, stimulated by a high demand from cell biologists and biophysicists. This Account focuses on advances in these smart molecules, providing a voyage from the cell frontier─plasma membranes (PM)─toward intracellular membrane compartments─organelles. General classification of the membrane probes can be based on targeting principles, sensing profile, and optical response. Probes for PM and organelle membranes are designed based on multiple targeting principles: conjugation with natural lipids or synthetic targeting ligands and in situ cell labeling by bio-orthogonal chemistry, conjugation to protein tags, and receptor-ligand interactions. Thus, to obtain membrane probes targeting PM with selectivity to one leaflet, we designed membrane anchor ligands based on a charged group and an alkyl chain. According to the sensing profile, we define basic membrane markers with constant emission and probes for biophysical and chemical sensing. The markers are built from classical fluorophores, exemplified by a series of bright cyanines and BODIPY dyes bearing the PM anchors (MemBright). Membrane probes for biophysical sensing are based on environment-sensitive fluorophores: (1) polarity-sensitive solvatochromic dyes; (2) viscosity-sensitive fluorescent molecular rotors; (3) mechanosensitive fluorescent flippers; and (4) voltage-sensitive electrochromic dyes. Our solvatochromic probes based on Nile Red (NR12S, NR12A, NR4A), Laurdan (Pro12A), and 3-hydroxyflavone (F2N12S) through polarity-sensing can visualize liquid ordered and disordered phases of lipid membranes, sense lipid order and its heterogeneity in cell PM, detect apoptosis, etc. Chemically sensitive probes, combining a dye, membrane-targeting ligand, and molecular recognition unit, enable the detection of pH, ions, redox species, lipids, and proteins at the biomembrane surface. In terms of the optical response profile, we can identify (1) fluorogenic (turn-on) probes, allowing background-free imaging; (2) ratiometric probes, e.g., solvatochromic probes, which enable ratiometric imaging by changing their emission/excitation color; (3) fluorescence lifetime-responsive probes, e.g., fluorescence molecular rotors and flippers, suitable for fluorescence lifetime imaging (FLIM); and (4) switchable probes, important for single-molecule localization microscopy. We showed that combining solvatochromic probes with on-off switching through a reversible binding specifically to cell PM enables the mapping of their biophysical properties with superior resolution. While the majority of efforts have been focused on PM, the probes for cellular organelles, such as endoplasmic reticulum, mitochondria, Golgi apparatus, etc., emerge rapidly. Thus, nontargeted solvatochromic probes can distinguish organelles by the emission color. Targeted solvatochromic probes based on Nile Red revealed unique signatures of polarity and lipid order of individual organelles and their different sensitivities to oxidative or mechanical stress. Lipid droplets, which are membraneless lipidic structures, constitute another interesting organelle target for probing the cell stress. Currently, we stand at the beginning of a long route with big challenges ahead, in particular (1) to achieve superior organelle specificity; (2) to label specific biomembrane leaflets, notably the inner leaflet of PM; (3) to detect lipid organization in a proximity of specific proteins; and (4) to probe biomembranes in tissues and animals.

Fluorescent Probes Based on Charge and Proton Transfer for Probing Biomolecular Environment.

Fluorescent probes for sensing fundamental properties of biomolecular environment, such as polarity and hydration, help to study assembly of lipids into biomembranes, sensing interactions of biomolecules and imaging physiological state of the cells. Here, we summarize major efforts in the development of probes based on two photophysical mechanisms: (i) an excited-state intramolecular charge transfer (ICT), which is represented by fluorescent solvatochromic dyes that shift their emission band maximum as a function of environment polarity and hydration; (ii) excited-state intramolecular proton transfer (ESIPT), with particular focus on 5-membered cyclic systems, represented by 3-hydroxyflavones, because they exhibit dual emission sensitive to the environment. For both ICT and ESIPT dyes, the design of the probes and their biological applications are summarized. Thus, dyes bearing amphiphilic anchors target lipid membranes and report their lipid organization, while targeting ligands direct them to specific organelles for sensing their local environment. The labels, amino acid and nucleic acid analogues inserted into biomolecules enable monitoring their interactions with membranes, proteins and nucleic acids. While ICT probes are relatively simple and robust environment-sensitive probes, ESIPT probes feature high information content due their dual emission. They constitute a powerful toolbox for addressing multitude of biological questions.

Brightness of fluorescent organic nanomaterials.

Brightness is a fundamental property of fluorescent nanomaterials reflecting their capacity to absorb and emit light. In sensing materials, brightness is crucial for high-sensitivity (bio)molecular detection, while in optical bioimaging it ensures high spatial and temporal resolution. Fluorescent organic nanoparticles (NPs) are particularly attractive because of their superior brightness compared to organic dyes. With the ever-growing diversity of organic nanomaterials, it is important to establish universal principles for measuring and estimating their brightness. This tutorial review provides definitions of brightness and describes the major approaches to its analysis based on ensemble and single-particle techniques. We present the current chemical approaches to fight Aggregation-Caused Quenching (ACQ) of fluorophores, which is a major challenge in the design of bright organic nanomaterials. The main classes of fluorescent organic NPs are described, including conjugated polymer NPs, aggregation-induced emission NPs, and NPs based on neutral and ionic dyes. Their brightness and other properties are systematically compared. Some brightest examples of bulk solid-state emissive organic materials are also mentioned. Finally, we analyse the importance of brightness and other particle properties in biological applications, such as bioimaging and biosensing. This tutorial will provide guidelines for chemists on the design of fluorescent organic NPs with improved performance and help them to estimate and compare the brightness of new nanomaterials with literature reports. Moreover, it will help biologists to select appropriate materials for sensing and imaging applications.

Genetic Targeting of Solvatochromic Dyes for Probing Nanoscale Environments of Proteins in Organelles.

A variety of protein tags are available for genetically encoded protein labeling, which allow their precise localization and tracking inside the cells. A new dimension in protein imaging can be offered by combining protein tags with polarity-sensitive fluorescent probes, which provide information about local nanoscale environments of target proteins within the subcellular compartments (organelles). Here, we designed three fluorescent probes based on solvatochromic nile red dye, conjugated to a HaloTag reactive targeting group through polyethylene glycol linkers of varying lengths. The probe with medium linker length, NR12-Halo, was found to label specifically a large variety of proteins localized in defined cell compartments, such as plasma membranes (outer and inner leaflets), endoplasmic reticulum, Golgi apparatus, cytosol, microtubules, actin, and chromatin. Owing to its polarity-sensitive fluorophore, the probe clearly distinguished the proteins localized within apolar lipid membranes from other proteins. Moreover, it revealed dramatic changes in the environment during the life cycle of proteins from biosynthesis to their expected localization and, finally, to recycling inside lysosomes. Heterogeneity in the local polarity of some membrane proteins also suggested a formation of low-polar protein aggregates, for example, within cell-cell contacts. The approach also showed that mechanical stress (cell shrinking by osmotic shock) induced a general polarity decrease in membrane proteins, probably due to the condensation of biomolecules. Finally, the nanoenvironment of some membrane proteins was affected by a polyunsaturated fatty acid diet, which provided the bridge between organization of lipids and proteins. The developed solvatochromic HaloTag probe constitutes a promising tool for probing nanoscale environments of proteins and their interactions within subcellular structures.

µIVC-Useq: a microfluidic-assisted high-throughput functionnal screening in tandem with next generation sequencing and artificial neural network to rapidly characterize RNA molecules.

The function of an RNA is intimately linked to its three-dimensional structure. X-ray crystallography or NMR allow the fine structural characterization of small RNA (e.g., aptamers) with a precision down to atomic resolution. Yet, these technics are time consuming, laborious and do not inform on mutational robustness and the extent to which a sequence can be modified without altering RNA function, an important set of information to assist RNA engineering. On another hand, thought powerful, in silico predictions still lack the required accuracy. These limitations can be overcome by using high-throughput microfluidic-assisted functional screening technologies, as they allow exploring large mutant libraries in a rapid and cost-effective manner. Among them, we recently introduced the microfluidic-assisted In Vitro Compartmentalization (µIVC), an efficient screening strategy in which reactions are performed in picoliter droplets at rates of several thousand per second. We later improved µIVC efficiency by using in tandem with high throughput sequencing, thought a laborious bioinformatic step was still required at the end of the process. In the present work, we strongly increased the automation level of the pipeline by implementing an artificial neural network enabling unsupervised bioinformatic analysis. We demonstrate the efficiency of this "µIVC-Useq" technology by rapidly identifying a set of sequences readily accepted by a key domain of the light-up RNA aptamer SRB-2. This work not only shed some new light on the way this aptamer can be engineered, but it also allowed us to easily identify new variants with an up-to 10-fold improved performance.

Tuning Directed Photooxidation-Induced Conversion of Pyrrole-Based Styryl Coumarin Dual-Color Photoconverters.

Dual-emissive photoconvertible fluorophores (DPCFs) are powerful tools to unambiguously track labeled cells in bioimaging. We recently introduced a new rational mechanism called directed photooxidation-induced conversion (DPIC) enabling efficient DPCFs to be obtained by conjugating a coumarin to aromatic singlet-oxygen reactive moieties (ASORMs). Pyrrole was found to be a suitable ASORM as it provided a high hypsochromic shift along with a fast and efficient conversion. By synthesizing various pyrrole-based styryl coumarin dyes, we showed that the photoconversion properties, including the quantum yield of photoconversion and the chemical yield of conversion can be tuned by chemical modification of the pyrrole. These modifications led to an improved dual emissive converter, SCP-Boc, which displayed a high brightness and an enhanced photoconversion yield of 63 %. SCP-Boc was successfully used to sequentially photoconvert cells by laser scanning confocal microscopy.

Tuning Directed Photooxidation-Induced Conversion of Pyrrole-Based Styryl Coumarin Dual-Color Photoconverters.

Invited for the cover of this issue is the group of Mayeul Collot at the University of Strasbourg (CNRS). The image depicts the effect of simple chemical tuning on coumarin dyes to tune and improve the DPIC photoconversion mechanism. Read the full text of the article at 10.1002/chem.202203933.

Mixing versus Polymer Chemistry in the Synthesis of Loaded Polymer Nanoparticles through Nanoprecipitation.

Polymer nanoparticles (NPs) loaded with drugs and contrast agents have become key tools in the advancement of nanomedicine, requiring robust technologies for their synthesis. Nanoprecipitation is a particularly interesting technique for the assembly of loaded polymer NPs, which is well-known to proceed under kinetic control, with a strong influence of the assembly conditions. On the other hand, the nature of the used polymer also influences the outcome of nanoprecipitation. Here, we investigated systematically the relative effects of mixing of the organic and aqueous phases and polymer chemistry on the formation of polymer nanocarriers. For this, two mixing schemes, manual mixing and microfluidic mixing using an impact-jet micromixer, were first evaluated, showing mixing times of several tens of milliseconds and a few milliseconds, respectively. Copolymers of ethyl methacrylate with charged and hydrophilic groups and different polyesters (poly(d-l-lactide-co-glycolide) and poly(lactic acid)) were combined with a fluorescent dye salt and tested for particle assembly using these "slow" and "fast" mixing methods. Our results showed that in the case of the most hydrophobic polymers, the speed of mixing had no significant influence on the size and loading of the formed NPs. In contrast, in the case of less hydrophobic polymers, faster mixing led to smaller NPs with better encapsulation. The switch between mixing and polymer-controlled assembly was directly correlated to the solubility limit of the polymers in acetonitrile-water mixtures, with a critical point for solubility limits between 15 and 20 vol % of water. Our results provide simple guidelines on how to evaluate the possible influence of polymer chemistry and mixing on the formation of loaded NPs, opening the way to fine-tune their properties and optimize their large-scale production.

Study of surfactant cross-linking by click chemistry on a model water/oil interface.

In this study, we explored how chemical reactions of amphiphile compounds can be characterized and followed-up on model interfaces. A custom-made surfactant containing three alkyne sites was first adsorbed and characterized at a water/oil interface. These amphiphiles then underwent interfacial crosslinking by click chemistry upon the addition of a second reactive agent. The monolayer properties and dilatational elasticity, were compared before and after the polymerization. Using bulk phase exchange, the composition of the aqueous bulk phase was finely controlled and washed to specifically measure the interfacial effects of the entities adsorbed and trapped at the interface. In this study, we aim to emphasize an original experimental approach to follow complex phenomena occurring on model interfaces, and also show the potential of this method to characterize multifactorial processes.

The Plasma Membrane Polarity Is Higher in the Neuronal Growth Cone than in the Cell Body of Hippocampal and Cerebellar Granule Neurons.

The polarity of the biological membrane, or lipid order, regulates many cellular events. It is generally believed that the plasma membrane polarity is regulated according to cell type and function, sometimes even within a cell. Neurons have a variety of functionally specialized subregions, each of which bears distinct proteins and lipids, and the membrane polarity of the subregions may differ accordingly. However, no direct experimental evidence of it has been presented to date. In the present study, we used a cell-impermeable solvatochromic membrane probe NR12A to investigate the local polarity of the plasma membrane of neurons. Both in hippocampal and cerebellar granule neurons, growth cones have higher membrane polarity than the cell body. In addition, the overall variation in the polarity value of each pixel was greater in the growth cone than in cell bodies, suggesting that the lateral diffusion and/or dynamics of the growth cone membrane are greater than other parts of the neuron. These tendencies were much less notably observed in the lamellipodia of a non-neuronal cell. Our results suggest that the membrane polarity of neuronal growth cones is unique and this characteristic may be important for its structure and function.

Characterizing Counterion-Dependent Aggregation of Rhodamine B by Classical Molecular Dynamics Simulations.

The aggregation in a solution of charged dyes such as Rhodamine B (RB) is significantly affected by the type of counterion, which can determine the self-assembled structure that in turn modulates the optical properties. RB aggregation can be boosted by hydrophobic and bulky fluorinated tetraphenylborate counterions, such as F5TPB, with the formation of nanoparticles whose fluorescence quantum yield (FQY) is affected by the degree of fluorination. Here, we developed a classical force field (FF) based on the standard generalized Amber parameters that allows modeling the self-assembling process of RB/F5TPB systems in water, consistent with experimental evidence. Namely, the classical MD simulations employing the re-parametrized FF reproduce the formation of nanoparticles in the RB/F5TPB system, while in the presence of iodide counterions, only RB dimeric species can be formed. Within the large, self-assembled RB/F5TPB aggregates, the occurrence of an H-type RB-RB dimer can be observed, a species that is expected to quench RB fluorescence, in agreement with the experimental data of FQY. The outcome provides atomistic details on the role of the bulky F5TPB counterion as a spacer, with the developed classical FF representing a step towards reliable modeling of dye aggregation in RB-based materials.

Dual-Color Photoconvertible Fluorescent Probes Based on Directed Photooxidation Induced Conversion for Bioimaging.

We herein present a new concept to produce dual-color photoconvertible probes based on a mechanism called Directed Photooxidation Induced Conversion (DPIC). As a support of this mechanism, styryl-coumarins (SCs) bearing Aromatic Singlet Oxygen Reactive Moieties (ASORMs) like furan and pyrrole have been synthesized. SCs are bright fluorophores, which undergo a hypsochromic conversion upon visible light irradiation due to directed photooxidation of the ASORM that leads to the disruption of conjugation. SC-P, a yellow emitting probe bearing a pyrrole moiety, converts to a stable blue emitting coumarin with a 68 nm shift allowing the photoconversion and tracking of lipid droplet in live cells. This new approach might pave the way to a new generation of photoconvertible dyes for advanced bioimaging applications.

Fluorogenic Dimers as Bright Switchable Probes for Enhanced Super-Resolution Imaging of Cell Membranes.

Super-resolution fluorescence imaging based on single-molecule localization microscopy (SMLM) enables visualizing cellular structures with nanometric precision. However, its spatial and temporal resolution largely relies on the brightness of ON/OFF switchable fluorescent dyes. Moreover, in cell plasma membranes, the single-molecule localization is hampered by the fast lateral diffusion of membrane probes. Here, to address these two fundamental problems, we propose a concept of ON/OFF switchable probes for SMLM (points accumulation for imaging in nanoscale topography, PAINT) based on fluorogenic dimers of bright cyanine dyes. In these probes, the two cyanine units connected with a linker were modified at their extremities with low-affinity membrane anchors. Being self-quenched in water due to intramolecular dye H-aggregation, they displayed light up on reversible binding to lipid membranes. The charged group in the linker further decreased the probe affinity to the lipid membranes, thus accelerating its dynamic reversible ON/OFF switching. The concept was validated on cyanines 3 and 5. SMLM of live cells revealed that the new probes provided higher brightness and ∼10-fold slower diffusion at the cell surface, compared to reference probes Nile Red and DiD, which boosted axial localization precision >3-fold down to 31 nm. The new probe allowed unprecedented observation of nanoscale fibrous protrusions on plasma membranes of live cells with 40 s time resolution, revealing their fast dynamics. Thus, going beyond the brightness limit of single switchable dyes by cooperative dequenching in fluorogenic dimers and slowing down probe diffusion in biomembranes open the route to significant enhancement of super-resolution fluorescence microscopy of live cells.

Imaging and Measuring Vesicular Acidification with a Plasma Membrane-Targeted Ratiometric pH Probe.

Tracking the pH variation of intracellular vesicles throughout the endocytosis pathway is of prior importance to better assess the cell trafficking and metabolism of cells. Small molecular fluorescent pH probes are valuable tools in bioimaging but are generally not targeted to intracellular vesicles or are directly targeted to acidic lysosomes, thus not allowing the dynamic observation of the vesicular acidification. Herein, we designed Mem-pH, a fluorogenic ratiometric pH probe based on chromenoquinoline with appealing photophysical properties, which targets the plasma membrane (PM) of cells and further accumulates in the intracellular vesicles by endocytosis. The exposition of Mem-pH toward the vesicle's lumen allowed to monitor the acidification of the vesicles throughout the endocytic pathway and enabled the measurement of their pH via ratiometric imaging.

Rational Design of Self-Quenched Rhodamine Dimers as Fluorogenic Aptamer Probes for Live-Cell RNA Imaging.

With the growing interest in the understanding of the importance of RNAs in health and disease, detection of RNAs in living cells is of high importance. Fluorogenic dyes that light up specifically selected RNA aptamers constitute an attractive direction in the design of RNA imaging probes. In this work, based on our recently proposed concept of a fluorogenic dimer, we aim to develop a robust molecular tool for intracellular RNA imaging. We rationally designed a fluorogenic self-quenched dimer (orange Gemini, o-Gemini) based on rhodamine and evaluated its capacity to light up its cognate aptamer o-Coral in solution and live cells. We found that the removal of biotin from the dimer slightly improved the fluorogenic response without losing the affinity to the cognate aptamer (o-Coral). On the other hand, replacing sulforhodamine with a carboxyrhodamine produced drastic improvement of the affinity and the turn-on response to o-Coral and, thus, a better limit of detection. In live cells expressing o-Coral-tagged RNAs, the carboxyrhodamine analogue of o-Gemini without a biotin unit displayed a higher signal as well as faster internalization into the cells. We suppose that less hydrophilic carboxyrhodamine compared to sulforhodamine can more readily penetrate through the cell plasma membrane and, together with its higher affinity to o-Coral, provide the observed improvement in the imaging experiments. The promiscuity of the o-Coral RNA aptamer to the fluorogenic dimer allowed us to tune a fluorogen chemical structure and thus drastically improve the fluorescence response of the probe to o-Coral-tagged RNAs.

Agonist-induced membrane nanodomain clustering drives GLP-1 receptor responses in pancreatic beta cells.

The glucagon-like peptide-1 receptor (GLP-1R), a key pharmacological target in type 2 diabetes (T2D) and obesity, undergoes rapid endocytosis after stimulation by endogenous and therapeutic agonists. We have previously highlighted the relevance of this process in fine-tuning GLP-1R responses in pancreatic beta cells to control insulin secretion. In the present study, we demonstrate an important role for the translocation of active GLP-1Rs into liquid-ordered plasma membrane nanodomains, which act as hotspots for optimal coordination of intracellular signaling and clathrin-mediated endocytosis. This process is dynamically regulated by agonist binding through palmitoylation of the GLP-1R at its carboxyl-terminal tail. Biased GLP-1R agonists and small molecule allosteric modulation both influence GLP-1R palmitoylation, clustering, nanodomain signaling, and internalization. Downstream effects on insulin secretion from pancreatic beta cells indicate that these processes are relevant to GLP-1R physiological actions and might be therapeutically targetable.