Skin simulants for wound ballistic investigation - an experimental study.

Gunshot wound analysis is an important part of medicolegal practice, in both autopsies and examinations of living persons. Well-established and studied simulants exist that exhibit both physical and biomechanical properties of soft-tissues and bones. Current research literature on ballistic wounds focuses on the biomechanical properties of skin simulants. In our extensive experimental study, we tested numerous synthetic and natural materials, regarding their macromorphological bullet impact characteristics, and compared these data with those from real bullet injuries gathered from medicolegal practice. Over thirty varieties of potential skin simulants were shot perpendicularly, and at 45°, at a distance of 10 m and 0.3 m, using full metal jacket (FMJ) projectiles (9 × 19 mm Luger). Simulants included ballistic gelatine at various concentrations, dental silicones with several degrees of hardness, alginates, latex, chamois leather, suture trainers for medical training purposes and various material compound models. In addition to complying to the general requirements for a synthetic simulant, results obtained from dental silicones shore hardness 70 (backed with 20 % by mass gelatine), were especially highly comparable to gunshot entry wounds in skin from real cases. Based on these results, particularly focusing on the macroscopically detectable criteria, we can strongly recommend dental silicone shore hardness 70 as a skin simulant for wound ballistics examinations.

Gunshot residues found at the exit wound: a case report.

Gunshot residues (GSRs) play an important role in forensic investigations of gun-related violence. The presence of GSRs has been described to help to identify the bullet entry area, as it was supposed not to be found at exit wounds. This report details the suicidal headshot of an 84-year-old male where unburned tube-like, cuboid and flake-formed powder particles have been found not only at the inside of the muzzle but also circular around the exit wound. With very short-barrelled weapons, it must be expected that part of the propellant charge leaves the barrel unburned behind the bullet. In contrast to that, the barrel length of the used weapon should lead to a complete burn-up of powder particles. The surprisingly large number of unburned powder particles present at the exit wound of the injury gave reason for further investigation to understand the underlying ballistic aspects and outlines the importance of having a close look at incidence scene photos during an investigation.

Skin laceration caused by a short distance shot from a pepper spray launcher: a case report.

Pepper spray launchers are more precise and wind stable compared to conventional pepper sprays and are commonly used as a self-defensive tool. With the advanced potential, they may also harbour a greater risk for injuries, especially if they are not used within the suggested safety distance. If the shooting distance is below 1.5 m, energy densities may exceed the threshold energy density for the penetration of skin leading to skin laceration. We present a case where a man is hit by the liquid jet of a JPX Jet Protector® with an estimated shooting distance of 0.3 m. The man suffered from a bleeding skin laceration, which had to be sewed in the hospital. This case report furthermore outlines the potentially dangerous effect of pepper spray launchers and thereby their role in forensic investigations.

Bursting of the upper jaw prosthesis and fractures of the lower jaw as indirect injury pattern caused by a headshot: a case report.

Gunshots to the human body can cause direct and indirect injuries. Direct injuries are a consequence of the projectile guiding its way through the body, creating a permanent wound channel and thereby damaging the penetrated as well as the adjacent tissue. In addition, the temporary wound cavity is responsible for indirect injuries occurring distant to the actual wound tract. This can potentially affect different types of tissue, like blood vessels, organs, or bones, that are not directly passed through by the projectile. For this case report, we describe a suicidal headshot to the temporal area where the extension of the temporary wound cavity and its subsequent collapse led to massive energy transfer to the surrounding tissue leading to breakage of the upper dental prosthesis and fractures of the lower jaw. Thereby outlining the ballistic mechanisms causing indirect injury pattern that have to be considered when examining gunshot wounds.

Deadly injuries through recoilless anti-tank weapons while military shooting practice-two case studies from Germany and Switzerland.

In this casuistry, two accidents from Germany and Switzerland are presented that happened during the shot of recoilless anti-tank weapons. In both cases, the injuries led to the death of two soldiers: A 22-year-old soldier in Germany was struck by the counter mass of a so-called Davis gun which had been fired by a comrade during a firing exercise; he died from his severe injuries, especially in the abdominal part of the body. As a peculiarity of the wound morphology, it was found to be a thick-layered, metallic, gray material in the wound cavity, which corresponded to the material of the counter mass that was ejected opposite to the shooting direction. The other case took place in Switzerland, where a 24-year-old soldier was seriously injured during an exercise with portable anti-tank rockets. At the time the shot was fired, he stood behind the launcher and was hit by the propulsion jet of the rocket motor. He died as well from his severe injuries, which were located at the chest done by the gas jet and by the very high pressure. In both cases, two different causes of death were present: massive blunt violence in the first case versus a jet of hot gases of very high speed and temperature in the second case.

Threshold of the skull injury for blunt force impacts under free and constraint boundary conditions.

The formation of skull fractures is an important topic in legal medicine. In particular, the influence of boundary conditions is controversially discussed in the literature. A study focusing solely on this aspect was missing. This study aimed to investigate the influence of boundary conditions on the energy threshold for head fractures. Because of the great variability of biological tissue of real skulls, we opted for a head model made from a polyurethane sphere filled with gelatin. Furthermore, we decided to investigate two opposite situations: A fixed configuration where a model was placed on a rigid surface and a (quasi) free boundary configuration where the head model was held at a force of 5 N compensating for gravity. For both configurations, we determined the acceleration signal of the impactor, the force, and the energy threshold for head fracture. It turned out that the fracture forces for both configurations were the same whereas the energy threshold was 11.0 J for the fixed and 13.6 J for the free boundary. The difference seems to be negligible if compared to the effect of varying structural mechanical properties of real human heads. This means that in a forensic case, the two situations most probably cannot be distinguished. To investigate the influence of the impactor mass, we developed a mathematical model and fitted the experimental data. As a result, we found that in the free configuration, a larger mass increases the energy threshold for head fracture. So that in principle, the two configurations are distinguishable.

Influence of a soft tissue layer covering the kidney upon blunt impact.

Blunt abdominal organ injury is an abundant and relevant topic in forensic medicine, yet comparatively few experimental studies have been performed to quantify organ injury threshold parameters. The goal of this study was to relate an impact to a kidney injury determining an energy threshold while taking account of the influence of the overlaying soft tissue thickness. A model consisting of ballistic gelatin with an embedded filled porcine kidney was made such that a gelatin layer of 2 or 4 cm thickness covered the organ. An impactor was dropped on this model from different heights and the resulting organ damage was categorized according to the abbreviated injury scale (AIS). The 50% energy threshold for damage and the 50% energy threshold causing injuries ≥ AIS 3 were determined for the two protecting soft layers to be 22 J and 32 J and 27 J and 36 J, respectively. A finite element model was created to determine the strain energy densities at the depth of the organ's surface for these energies. The strain energy densities for the 50% damage thresholds were 88.9 mJ/cm3 and 86.7 mJ/cm3 for 2 and 4 cm and for the injuries ≥ AIS 3104.2 mJ/cm3 and 98.7 mJ/cm3. For forensic cases, this means that the thickness of the abdominal layers must be taken into account when the severity of an injury is used to draw conclusions about the applied impact strength.

Impact energy of everyday items used for assault.

Blunt force is a frequently used type of violence especially because it can be performed with basically every object of our daily lives or with bare hands or feet. The injuries and medical consequences have been widely examined, whereas the forces and especially the energies acting on impact have rarely been analyzed. The aim of the present study is to provide the impact energy and its ranges of four longish everyday items with different characteristics for male and female offenders. Additionally, the moment of inertia (MOI) for all the objects was calculated and its influence on the energy determined. A combination wrench, aluminum pipe, golf club, and spade were chosen as representatives of the four categories short, medium length with the center of mass (COM) in the middle, medium length with the COM close to the hitting point, and long and heavy. A total of 880 strikes have been performed by 11 volunteers. The results show the mean energy values of wrench, pipe, golf club, and spade for men of 51.1, 74.4, 93.5, and 166.7 J. For women, the results are 33.0, 41.0, 56.5, and 76.8 J. Knowing the energy thresholds for certain fractures and injuries, these results help to assess whether a claimed hit may have caused the fracture or injury or not.

The influence of striking object characteristics on the impact energy.

A common form of violence investigated in legal medicine is blunt trauma caused by striking with different objects. The injuries and medical consequences have been widely examined, whereas the forces and especially the energies acting on impact have rarely been analyzed. This study focuses on how the impact energy of different striking objects depends on their characteristics. A total of 1170 measurements of horizontal strikes against a static and relatively heavy pendulum have been acquired with 13 volunteers. The main focus was laid on how the weight, the length, and the center of mass of the different striking objects influenced the striking energy. The results show average impact energies in the range of 67.3 up to 311.5 J for men with an optimum weight of about 1.3 kg with its center of mass in the far end quarter for a 1-m-long striking object. The average values for women range from 30 to 202.6 J, with an optimum weight between 1.65 and 2.2 kg and similar settings for the center of mass as the men. Also, the impact energies are getting higher with shorter object lengths and reach a maximum at a length of about 0.3 to 0.4 m. The male volunteers' impact energy was on average by 84.2% higher than the values of the female volunteers, where the impact masses were very similar and the impact velocities played the key role.

A patterned abrasion caused by the impact of a cartridge case may simulate an atypical muzzle imprint mark.

In contact shots, the muzzle imprint is an informative finding associated with the entrance wound. It typically mirrors the constructional components being in line with the muzzle or just behind. Under special conditions, other patterned skin marks located near a gunshot entrance wound may give the impression to be part of the muzzle imprint. A potential mechanism causing a patterned pressure abrasion in close proximity to the bullet entrance site is demonstrated on the basis of a suicidal shot to the temple. The skin lesion in question appeared as a ring-shaped excoriation with a diameter corresponding to that of the cartridge case. Two hypotheses concerning the causative mechanism were investigated by test shots: - After being ejected, the cartridge case ricocheted inside a confined space (car cabin in the particular case) and secondarily hit the skin near the gunshot entrance wound. - The ejection of the cartridge case failed so that the case became stuck in the ejection port and its mouth contacted the skin when the body collapsed after being hit.

Stabbing energy and force required for pocket-knives to pierce ribs.

PURPOSE: In addition to reconstructing the course of events, the medical examiner will often have to answer questions regarding the force necessary to inflict a certain injury in stabbing incidents. Several groups have examined the force needed to penetrate soft-tissue and clothing; however, no studies addressing the energy needed for penetrating ribs exist. Therefore, we decided to investigate this force on an animal model. METHOD: Ribs from healthy, 8 to 10-month-old pigs were used as a substitute for human ribs. These ribs were then stabbed either transversely or longitudinally with two different pocket-knife blades, namely a Swiss Army pocket knife and a sturdier pocket knife (Classic Schnitzmesser, Herbertz Solingen) dropped from a drop-tower at defined heights and therefore defined energies. RESULTS: Longitudinally orientated stabs showed complete piercing of the ribs at approximately 11 Joules (J) or with a stabbing force in excess of 906 Newton (N) for both blade types. Transversely orientated stabs, however, displayed complete piercing between 11 and 16 J, or in excess of 1198 N, with the sturdy pocket knife tending to require a little more energy than the Swiss army pocket knife. CONCLUSIONS: Young adult porcine ribs are completely pierced by pocket knife blades at energies between 11 and 16 J. Assuming the porcine ribs are comparable to those ribs of young adult humans, our results indicate that a complete penetration of the chest wall through the ribs by stabbing with a pocket knife is rather easily achieved.

Fatal contact shot to the chest caused by the gas jet from a muzzle-loading pistol discharging only black powder and no bullet: case study and experimental simulation of the wounding effect.

In modern medico-legal literature, only a small number of publications deal with fatal injuries from black powder guns. Most of them focus on the morphological features such as intense soot soiling, blast tattooing and burn effects in close-range shots or describe the wound ballistics of spherical lead bullets. Another kind of "unusual" and potentially lethal weapons are handguns destined for firing only blank cartridges such as starter and alarm pistols. The dangerousness of these guns is restricted to very close and contact range shots and results from the gas jet produced by the deflagration of the propellant. The present paper reports on a suicide committed with a muzzle-loading percussion pistol cal. 45. An unusually large stellate entrance wound was located in the precordial region, accompanied by an imprint mark from the ramrod and a faint greenish discoloration (apparently due to the formation of sulfhemoglobin). Autopsy revealed an oversized powder cavity, multiple fractures of the anterior thoracic wall as well as ruptures of the heart, the aorta, the left hepatic lobe and the diaphragm. In total, the zone of mechanical destruction had a diameter of approx. 15 cm. As there was no exit wound and no bullet lodged in the body, the injury was caused exclusively by the inrushing combustion gases of the propellant (black powder) comparable with the gas jet of a blank cartridge gun. In contact shots to ballistic gelatine using the suicide's pistol loaded with black powder but no projectile, the formation of a nearly spherical cavity could be demonstrated by means of a high-speed camera. The extent of the temporary cavity after firing with 5 g of black powder roughly corresponded to the zone of destruction found in the suicide's body.

The varying size of exit wounds from center-fire rifles as a consequence of the temporary cavity.

To study the question whether and how the size and position of the temporary cavity influence the morphology and especially the size of a bullet exit wound, test shots were fired to composite models consisting of gelatine and pig soft tissue covered with skin (at the exit site). The dimensions of the composite model were determined such that the exit planes were located either at the level of the narrow channel or within the temporary cavity or behind it. The chronological sequence of wound formation and its relation to the current position of the bullet were documented by means of a high-speed camera. Test shots were fired from a distance of 10 m using 5.56 × 45 mm cartridges with full metal-jacketed pointed bullets (v 0 ∼ 912 m/s, E 0 ∼ 1,663 J). The study proved that the extension and position of the temporary wound cavity was decisive for the size of the exit wound: An exit plane within the cavity resulted in particularly large skin lesions, whereas the wound diameters were much smaller if the exit plane was located in front or behind the cavity. The exit hole reaches its maximum size only after the bullet has left the target synchronous to the staggered expansion of the temporary cavity.

Lung injury similar to blast lung in a case of shotgun wound of the head.

Primary blast lung injury after explosions has been well described in the literature. A case of injury to the lung, after a shotgun wound to the head, similar to primary blast lung, is presented. Histological appearances of the lung revealed alveolar over distension, rupture and intra-alveolar hemorrhage. Primary blast lung injury is considered the reserve of high-order explosives; however, this case reveals similar injuries from a shotgun (low-order explosive), which has not been reported before to the best of our knowledge.

GSR deposition along the bullet path in contact shots to composite models.

In contact shots, all the materials emerging from the muzzle (combustion gases, soot, powder grains, and metals from the primer) will be driven into the depth of the entrance wound and the following sections of the bullet track. The so-called "pocket" ("powder cavity") under the skin containing soot and gunpowder particles is regarded as a significant indicator of a contact entrance wound since one would expect that the quantity of GSR deposited along the bullet's path rapidly declines towards the exit hole. Nevertheless, experience has shown that soot, powder particles, and carboxyhemoglobin may be found not only in the initial part of the wound channel, but also far away from the entrance and even at the exit. In order to investigate the propagation of GSRs under standardized conditions, contact test shots were fired against composite models of pig skin and 25-cm-long gelatin blocks using 9-mm Luger pistol cartridges with two different primers (Sinoxid® and Sintox®). Subsequently, 1-cm-thick layers of the gelatin blocks were examined as to their primer element contents (lead, barium, and antimony as discharge residues of Sinoxid® as well as zinc and titanium from Sintox®) by means of X-ray fluorescence spectroscopy. As expected, the highest element concentrations were found in the initial parts of the bullet tracks, but also the distal sections contained detectable amounts of the respective primer elements. The same was true for amorphous soot and unburned/partly burned powder particles, which could be demonstrated even at the exit site. With the help of a high-speed motion camera it was shown that for a short time the temporary cavitation extends from the entrance to the exit thus facilitating the unlimited spread of discharge residues along the whole bullet path.

Collateral damage--penetrating head injury and orbital injury: a case report.

We report a case of an accidental death or potential suicide by revolver with subsequent injury of another person. A 44-year-old man shot himself in the head while manipulating his .38 caliber special revolver in the kitchen in the presence of his wife, standing approximately 1.5 m next to him. After passing through the husband's head, the lead round-nose bullet entered the region underneath his wife's left eye. When the bullet left the man's head, it retained the energy to penetrate the soft tissue at this distance, including the skin and thin bone plates like the orbital wall. Owing to the low energy of the projectile, the entry wound was of atypical in shape and without loss of tissue. Only a small line--resembling a cut--was externally visible. The man died in the hospital from his injuries; his wife suffered visual loss of her left eye.

A case of homicidal intraoral gunshot and review of the literature.

Determination of the manner of death in case of intraoral firearm wounds can be a challenge, especially if the circumstances of the incident are unclear and crime scene investigation is inadequate. It is a well-known fact that the mouth is one of the selected sites for suicide with firearms. Homicidal shooting through the mouth is said to be rare, but does occur, and can be mistaken for a suicide. For discrimination between suicide and homicide in cases of intraoral firearm wounds, some useful points are the site of entry wound, the direction of the internal bullet path, the range of fire and the circumstances of death. We demonstrate these points in a case of a homicidal gunshot to the mouth assessed by both classical autopsy and post-mortem CT (PMCT).

Gunshot energy transfer profile in ballistic gelatine, determined with computed tomography using the total crack length method.

By measuring the total crack lengths (TCL) along a gunshot wound channel simulated in ordnance gelatine, one can calculate the energy transferred by a projectile to the surrounding tissue along its course. Visual quantitative TCL analysis of cut slices in ordnance gelatine blocks is unreliable due to the poor visibility of cracks and the likely introduction of secondary cracks resulting from slicing. Furthermore, gelatine TCL patterns are difficult to preserve because of the deterioration of the internal structures of gelatine with age and the tendency of gelatine to decompose. By contrast, using computed tomography (CT) software for TCL analysis in gelatine, cracks on 1-cm thick slices can be easily detected, measured and preserved. In this, experiment CT TCL analyses were applied to gunshots fired into gelatine blocks by three different ammunition types (9-mm Luger full metal jacket, .44 Remington Magnum semi-jacketed hollow point and 7.62 × 51 RWS Cone-Point). The resulting TCL curves reflected the three projectiles' capacity to transfer energy to the surrounding tissue very accurately and showed clearly the typical energy transfer differences. We believe that CT is a useful tool in evaluating gunshot wound profiles using the TCL method and is indeed superior to conventional methods applying physical slicing of the gelatine.

Secondary skull fractures in head wounds inflicted by captive bolt guns: autopsy findings and experimental simulation.

Apart from one article published by Rabl and Sigrist in 1992 (Rechtsmedizin 2:156-158), there are no further reports on secondary skull fractures in shots from captive bolt guns. Up to now, the pertinent literature places particular emphasis on the absence of indirect lesions away from the impact point, when dealing with the wounding capacity of slaughterer's guns. The recent observation of two suicidal head injuries accompanied by skull fractures far away from the bolt's path gave occasion to experimental studies using simulants (glycerin soap, balls from gelatin) and skull­brain models. As far as ballistic soap was concerned, the dimensions of the bolt's channel were assessed by multi-slice computed tomography before cutting the blocks open. The test shots to gelatin balls and to skull-brain models were documented by means of a high-speed motion camera. As expected, the typical temporary cavity effect of bullets fired from conventional guns could not be observed when captive bolt stunners were discharged. Nevertheless, the visualized transfer of kinetic energy justifies the assumption that the secondary fractures seen in thin parts of the skull were caused by a hydraulic burst effect.

Danger assessment of a spring-gun device (muzzleloader) loaded only with black powder.

We report a case involving a spring-gun device (muzzleloader) loaded solely with gunpowder, installed next to shoes to prevent the neighbors' puppy from removing them. The booby trap was triggered by the 15-year-old dog-owners son when he tried to put the shoes out of the reach of the puppy. The boy suffered second degree superficial burns located mainly at the dorsal side of the right hand and fingers. To estimate the danger of the used weapon, several tests were undertaken on soap blocks from different distances and with different loads of black powder. The particle density per mm and the depth of black powder tattooing in the soap was compared with the boy's injuries, and found conclusive with the gun-owners statement regarding the loading of the weapon. Furthermore, our experiments indicated that the gunpowder load involved was not able to inflict permanent damage, not even to the eyes, at the here estimated firing distance.