Crystal structure of Aspergillus niger pH 2.5 acid phosphatase at 2. 4 A resolution.

The crystal structure of Aspergillus niger pH 2.5 acid phosphatase (EC 3.1.3.2) has been determined at 2.4 A resolution. In the crystal, two dimers form a tetramer in which the active sites are easily accessible to substrates. The main contacts in the dimer come from the N termini, each lying on the surface of the neighbouring molecule. The monomer consists of two domains, with the active site located at their interface. The active site has a highly conserved catalytic center and a charge distribution, which explains the highly acidic pH optimum and the broad substrate specificity of the enzyme.

Crystal structures of Streptococcus pneumoniae N-acetylglucosamine-1-phosphate uridyltransferase, GlmU, in apo form at 2.33 A resolution and in complex with UDP-N-acetylglucosamine and Mg(2+) at 1.96 A resolution.

N-Acetylglucosamine-1-phosphate uridyltransferase (GlmU) is an essential bacterial enzyme with both an acetyltransferase and a uridyltransferase activity which have been mapped to the C-terminal and N-terminal domains, respectively. GlmU performs the last two steps in the synthesis of UDP-N-acetylglucosamine (UDP-GlcNAc), which is an essential precursor in both the peptidoglycan and the lipopolysaccharide metabolic pathways. GlmU is therefore an attractive target for potential antibiotics. Knowledge of its three-dimensional structure would provide a basis for rational drug design. We have determined the crystal structures of Streptococcus pneumoniae GlmU (SpGlmU) in apo form at 2.33 A resolution, and in complex with UDP-N-acetyl glucosamine and the essential co-factor Mg(2+) at 1.96 A resolution. The protein structure consists of an N-terminal domain with an alpha/beta-fold, containing the uridyltransferase active site, and a C-terminal domain with a long left-handed beta-sheet helix (LbetaH) domain. An insertion loop containing the highly conserved sequence motif Asn-Tyr-Asp-Gly protrudes from the left-handed beta-sheet helix domain. In the crystal, S. pneumoniae GlmU forms exact trimers, mainly through contacts between left-handed beta-sheet helix domains. UDP-N-acetylglucosamine and Mg(2+) are bound at the uridyltransferase active site, which is in a closed form. We propose a uridyltransferase mechanism in which the activation energy of the double negatively charged phosphorane transition state is lowered by charge compensation of Mg(2+) and the side-chain of Lys22.

Crystal structure of the factor for inversion stimulation FIS at 2.0 A resolution.

The factor for inversion stimulation (FIS) binds as a homodimeric molecule to a loose 15 nucleotide consensus sequence in DNA. It stimulates DNA-related processes, such as DNA inversion and excision, it activates transcription of tRNA and rRNA genes and it regulates its own synthesis. FIS crystallizes as a homodimer, with 2 x 98 amino acid residues in the asymmetric unit. The crystal structure was determined with multiple isomorphous replacement and refined to an R-factor of 19.2% against all the 12,719 X-ray data (no sigma-cutoff) extending to 2.0 A resolution. The two monomers are related by a non-crystallographic dyad axis. The structure of the dimer is modular, with the first 23 amino acid residues in molecule M1 and the first 24 in molecule M2 disordered and not "seen" in the electron density. The polypeptide folds into four alpha-helices, with alpha A, alpha A' (amino acid residues 26 to 40) and alpha B, alpha B' (49 to 69) forming the core of the FIS dimer, which is stabilized by hydrophobic forces. To the core are attached "classical" helix-turn-helix motifs, alpha C, alpha D (73 to 81 and 84 to 94) and alpha C', alpha D'. The connections linking the helices are structured by two beta-turns for alpha A/alpha B, and alpha C1 type extensions are observed at the C termini of helices alpha B, alpha C and alpha D. Helices alpha D and alpha D' contain 2 x 6 positive charges; they are separated by 24 A and can bind adjacent major grooves in B-type DNA if it is bent 90 degrees. The modular structure of FIS is also reflected by mutation experiments; mutations in the N-terminal part and alpha A interfere with FIS binding to invertases, and mutations in the helix-turn-helix motif interfere with DNA binding.

Structure and function of the dihydropteroate synthase from Staphylococcus aureus.

The gene encoding the dihydropteroate synthase of staphylococcus aureus has been cloned, sequenced and expressed in Escherichia coli. The protein has been purified for biochemical characterization and X-ray crystallographic studies. The enzyme is a dimer in solution, has a steady state kinetic mechanism that suggests random binding of the two substrates and half-site reactivity. The crystal structure of apo-enzyme and a binary complex with the substrate analogue hydroxymethylpterin pyrophosphate were determined at 2.2 A and 2.4 A resolution, respectively. The enzyme belongs to the group of "TIM-barrel" proteins and crystallizes as a non-crystallographic dimer. Only one molecule of the substrate analogue bound per dimer in the crystal. Sequencing of nine sulfonamide-resistant clinical isolates has shown that as many as 14 residues could be involved in resistance development. The residues are distributed over the surface of the protein, which defies a simple interpretation of their roles in resistance. Nevertheless, the three-dimensional structure of the substrate analogue binary complex could give important insight into the molecular mechanism of this enzyme.

Active site residue 297 of Aspergillus niger phytase critically affects the catalytic properties.

The wild-type phytases from the Aspergillus niger strains NRRL 3135 and T213 display a three-fold difference in specific activity (103 versus 32 U/mg protein), despite only 12 amino acid differences that are distributed all over the sequence of the protein. Of the 12 divergent positions, three are located in or close to the substrate binding site. Site-directed mutagenesis of these residues in A. niger T213 phytase showed that the R297Q mutation (R in T213, Q in NRRL 3135) fully accounts for the differences in catalytic properties observed. Molecular modelling revealed that R297 may directly interact with a phosphate group of phytic acid. The fact that this presumed ionic interaction - causing stronger binding of substrates and products - correlates with a lower specific activity indicates that product (myo-inositol pentakisphosphate) release is the rate-limiting step of the reaction.

Novel inhibitors of DNA gyrase: 3D structure based biased needle screening, hit validation by biophysical methods, and 3D guided optimization. A promising alternative to random screening.

Random screening provided no suitable lead structures in a search for novel inhibitors of the bacterial enzyme DNA gyrase. Therefore, an alternative approach had to be developed. Relying on the detailed 3D structural information of the targeted ATP binding site, our approach combines as key techniques (1) an in silico screening for potential low molecular weight inhibitors, (2) a biased high throughput DNA gyrase screen, (3) validation of the screening hits by biophysical methods, and (4) a 3D guided optimization process. When the in silico screening was performed, the initial data set containing 350 000 compounds could be reduced to 3000 molecules. Testing these 3000 selected compounds in the DNA gyrase assay provided 150 hits clustered in 14 classes. Seven classes could be validated as true, novel DNA gyrase inhibitors that act by binding to the ATP binding site located on subunit B: phenols, 2-amino-triazines, 4-amino-pyrimidines, 2-amino-pyrimidines, pyrrolopyrimidines, indazoles, and 2-hydroxymethyl-indoles. The 3D guided optimization provided highly potent DNA gyrase inhibitors, e. g., the 3,4-disubstituted indazole 23 being a 10 times more potent DNA gyrase inhibitor than novobiocin (3).

Mg2+ binding to the active site of EcoRV endonuclease: a crystallographic study of complexes with substrate and product DNA at 2 A resolution.

The type II restriction endonuclease EcoRV was crystallized as a complex with the substrate DNA undecamer AAAGATATCTT (recognition sequence underlined). These crystals diffract to much better resolution (2 A) than was the case for the previously reported complex with the decamer GGGATATCCC [Winkler, F. K., Banner, D. W., Oefner, C., Tsernoglou, D., Brown, R. S., Heathman, S. P., Bryan, R. K., Martin, P. D., Petratos, K., & Wilson, K. S. (1993) EMBO J. 12, 1781-1795]. The crystal structure contains one dimer complex in the asymmetric unit and was solved by molecular replacement. The same kinked DNA conformation characteristic for enzyme-bound cognate DNA is observed. Crystals, soaked with Mg2+, show the essential cofactor bound at only one active site of the dimer, and the DNA is not cleaved. The Mg2+ has one oxygen from the scissile phosphodiester group and two carboxylate oxygens, one form Asp74 and one from Asp90, in its octahedral ligand sphere. The scissile phosphodiester group is pulled by 1 A toward the Mg2+. After substrate cleavage in solution, isomorphous crystals containing the enzyme--product--Mg2+ complex were obtained. In this structure, each of the 5'-phosphate groups is bound to two Mg2+. The kinked DNA conformation is essentially maintained, but the two central adenines, 3' to the cleavage sites, form an unusual cross-strand base stacking. The structures have been refined to R factors of 0.16 at 2.1-2.0 A resolution maintaining very good stereochemistry. On the basis of these structures and inspired by recent kinetic data [Vipond, I. B., & Halford, S. E. (1994) Biochemistry (second paper of three in this issue)], we have constructed a transition state model with two metals bound to the scissile phosphorane group.

Crystal engineering: a case study using the 24 kDa fragment of the DNA gyrase B subunit from Escherichia coli.

Site-directed mutagenesis was used to determine the efficacy of changing surface residues to improve crystal quality. Nine mutants of the 24 kDa fragment of the Escherichia coli DNA gyrase B subunit were produced, changing residues on the protein's surface. The mutations changed either the charge or the polarity of the wild-type amino acid. It was found that single amino-acid changes on the surface could have a dramatic effect on the crystallization properties of the protein and generally resulted in an improvement in the number of crystal-screen hits as well as an improvement in crystal quality. It is concluded that crystal engineering is a valuable tool for protein crystallography.

Crystal structure of guanosine-free ribonuclease T1, complexed with vanadate (V), suggests conformational change upon substrate binding.

Ribonuclease T1 was crystallized in the presence of vanadate(V). The crystal structure was solved by molecular replacement and refined by least-squares methods using stereochemical restraints. The refinement was based on data between 10 and 1.8 A and converged at a crystallographic R factor of 0.137. Except for the substrate-recognition site the three-dimensional structure of ribonuclease T1 closely resembles the structure of the enzyme complexed with guanosine 2'-phosphate and its derivatives. A tetrahedral anion was found at the catalytic site and identified as H2VO4-. This is the first crystal structure of ribonuclease T1 determined in the absence of bound substrate analogue. Distinct structural differences between guanosine-free and complexed ribonuclease T1 are observed at the base-recognition site: The side chains of Tyr45 and Glu46 and the region around Asn98 changed their conformations, and the peptide bond between Asn43 and Asn44 has turned around by 140 degrees. We suggest that the structural differences seen in the crystal structures of free and complexed ribonuclease T1 are related to conformational adjustments associated with the substrate binding process.

Crystal engineering: deletion mutagenesis of the 24 kDa fragment of the DNA gyrase B subunit from Staphylococcus aureus.

The 24 kDa fragment of DNA gyrase B from Staphylococcus aureus was expressed in Escherichia coli and purified for crystallization. Crystals of the wild-type protein grew in the presence of cyclothialidine but proved difficult to reproduce. In order to improve the crystallization, the flexible regions of the protein were deleted by mutagenesis. The mutant proteins were analyzed by differential scanning calorimetry and the most stable mutants produced crystals. It was possible to reproducibly grow single well defined crystals in the microbatch system which belonged to the space group C2 and diffracted isotropically to approximately 2 A resolution.

Crystal structure of phytase from Aspergillus ficuum at 2.5 A resolution.

Phytase is a high molecular weight acid phosphatase. The structure has an alpha/beta-domain similar to that of rat acid phosphatase and an alpha-domain with a new fold.

From DNA sequence to improved functionality: using protein sequence comparisons to rapidly design a thermostable consensus phytase.

Naturally-occurring phytases having the required level of thermostability for application in animal feeding have not been found in nature thus far. We decided to de novo construct consensus phytases using primary protein sequence comparisons. A consensus enzyme based on 13 fungal phytase sequences had normal catalytic properties, but showed an unexpected 15-22 degrees C increase in unfolding temperature compared with each of its parents. As a first step towards understanding the molecular basis of increased heat resistance, the crystal structure of consensus phytase was determined and compared with that of Aspergillus niger phytase. Aspergillus niger phytase unfolds at much lower temperatures. In most cases, consensus residues were indeed expected, based on comparisons of both three-dimensional structures, to contribute more to phytase stabilization than non-consensus amino acids. For some consensus amino acids, predicted by structural comparisons to destabilize the protein, mutational analysis was performed. Interestingly, these consensus residues in fact increased the unfolding temperature of the consensus phytase. In summary, for fungal phytases apparently an unexpected direct link between protein sequence conservation and protein stability exists.

Three-dimensional structure of the E. coli DNA-binding protein FIS.

The factor for inversion stimulation, FIS, is involved in several cellular processes, including site-specific recombination and transcriptional activation. In the reactions catalysed by the DNA invertases Gin, Hin and Cin, FIS stimulates recombination by binding to an enhancer sequence. Within the enhancer, two FIS dimers (each 2 x 98 amino acids) bind to two 15-base-pair consensus sequences and induce bending of the DNA. Current models propose that the enhancer-FIS complex organizes a specific synapse, either through direct interactions with Gin, or by modelling the substrate into a configuration suitable for recombination. Using X-ray analysis at 2.0 A resolution, we now show that FIS is composed of four alpha helices tightly intertwined to form a globular dimer with two protruding helix-turn-helix motifs. The 24 N-terminal amino acids are so poorly defined in the electron density map as to make interpretation doubtful, indicating that they might act as 'feelers' suitable for DNA or protein (invertase) recognition. We infer from model building that DNA has to bend for tight binding to FIS.

X-ray structure of junctional adhesion molecule: structural basis for homophilic adhesion via a novel dimerization motif.

Junctional adhesion molecules (JAMs) are a family of immunoglobulin-like single-span transmembrane molecules that are expressed in endothelial cells, epithelial cells, leukocytes and myocardia. JAM has been suggested to contribute to the adhesive function of tight junctions and to regulate leukocyte trans migration. We describe the crystal structure of the recombinant extracellular part of mouse JAM (rsJAM) at 2.5 A resolution. rsJAM consists of two immunoglobulin-like domains that are connected by a conformationally restrained short linker. Two rsJAM molecules form a U-shaped dimer with highly complementary interactions between the N-terminal domains. Two salt bridges are formed in a complementary manner by a novel dimerization motif, R(V,I,L)E, which is essential for the formation of rsJAM dimers in solution and common to the known members of the JAM family. Based on the crystal packing and studies with mutant rsJAM, we propose a model for homophilic adhesion of JAM. In this model, U-shaped JAM dimers are oriented in cis on the cell surface and form a two-dimensional network by trans-interactions of their N-terminal domains with JAM dimers from an opposite cell surface.