Order-disorder transition in thin films of horizontally-oriented cylinder-forming block copolymers: thermal fluctuations vs. preferential wetting.

We present experimental and theoretical investigations of the order-disorder transition (ODT) in thin films of cylinder-forming diblock copolymers with asymmetric wetting conditions. Grazing incidence small-angle X-ray scattering (GISAXS) was implemented to determine the ODT temperatures (TODT) for poly(styrene-b-2-vinyl pyridine) (PS-P2VP) block copolymer thin films on a P2VP-preferential silicon substrate. Specifically, films consisting of multilayers of horizontally-oriented cylindrical structures (from 1- to 9-layers) were tested. We find that films with more than 2 cylindrical layers have a TODT comparable to the bulk case. However, TODT decreases as the film becomes thinner and the monolayer system has an ODT 30 °C below the bulk. Using self-consistent field theory (SCFT), we studied the ordering in corresponding thin films with asymmetric (top and bottom surface) wetting conditions. Surprisingly, SCFT is found to predict an opposite trend in TODT with film thickness than observed experimentally. Field-theoretic simulations with complex Langevin sampling were employed to resolve this discrepancy and demonstrate that thermal fluctuations in the PS-P2VP thin-film system dominate its ordering behavior in monolayer and bilayer films.

Creating Extremely Asymmetric Lamellar Structures via Fluctuation-Assisted Unbinding of Miktoarm Star Block Copolymer Alloys.

We report the creation of highly asymmetric lamellar structures with a well-designed miktoarm star block copolymer of the S(IS')3 type, where S and S' are polystyrenes of different lengths and I is poly(isoprene). The domain spacing can be tuned continuously from 37 nm to over 300 nm when the miktoarm star block copolymer is blended with suitable molecular weight polystyrene homopolymers. Beyond the unbinding transition of the lamellar phase, extremely asymmetric lamellar structures were obtained with up to 97 wt % polystyrene, remarkably leaving the poly(isoprene) layers intact at only 3 wt %!

Phase behavior of electrostatically complexed polyelectrolyte gels using an embedded fluctuation model.

Nanostructured, responsive hydrogels formed due to electrostatic interactions have promise for applications such as drug delivery and tissue mimics. These physically cross-linked hydrogels are composed of an aqueous solution of oppositely charged triblocks with charged end-blocks and neutral, hydrophilic mid-blocks. Due to their electrostatic interactions, the end-blocks microphase separate and form physical cross-links that are bridged by the mid-blocks. The structure of this system was determined using a new, efficient embedded fluctuation (EF) model in conjunction with self-consistent field theory. The calculations using the EF model were validated against unapproximated field-theoretic simulations with complex Langevin sampling and were found consistent with small angle X-ray scattering (SAXS) measurements on an experimental system. Using both the EF model and SAXS, phase diagrams were generated as a function of end-block fraction and polymer concentration. Several structures were observed including a body-centered cubic sphere phase, a hexagonally packed cylinder phase, and a lamellar phase. Finally, the EF model was used to explore how parameters that directly relate to polymer chemistry can be tuned to modify the resulting phase diagram, which is of practical interest for the development of new hydrogels.

Quadrites and crossed-chain crystal structures in polymer semiconductors.

Many high-performance conjugated polymers for organic photovoltaics and transistors crystallize such that chains are parallel, resulting in significant anisotropy of the nanoscale charge transport properties. Here we demonstrate an unusual intercrystallite relationship where thin lamellae adopt a preferred epitaxial relationship with crossed-chains at the interface. The crossed-chains may allow either crystal to use the other as an "electronic shunt", creating efficient quasi-three-dimensional transport pathways that reduce the severity of grain boundaries and defects in limiting transport.

General strategy for self-assembly of highly oriented nanocrystalline semiconducting polymers with high mobility.

Solution processable semiconducting polymers with excellent film forming capacity and mechanical flexibility are considered among the most progressive alternatives to conventional inorganic semiconductors. However, the random packing of polymer chains and the disorder of the polymer matrix typically result in low charge transport mobilities (10(-5)-10(-2) cm(2) V(-1) s(-1)). These low mobilities compromise their performance and development. Here, we present a strategy, by utilizing capillary action, to mediate polymer chain self-assembly and unidirectional alignment on nanogrooved substrates. We designed a sandwich tunnel system separated by functionalized glass spacers to induce capillary action for controlling the polymer nanostructure, crystallinity, and charge transport. Using capillary action, we demonstrate saturation mobilities with average values of 21.3 and 18.5 cm(2) V(-1 )s(-1) on two different semiconducting polymers at a transistor channel length of 80 µm. These values are limited by the source-drain contact resistance, Rc. Using a longer channel length of 140 µm where the contact resistance is less important, we measured µh = 36.3 cm(2) v(-1) s(-1). Extrapolating to infinite channel length where Rc is unimportant, the intrinsic mobility for poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4-b']dithiophen-2-yl)-alt-[1,2,5]thiadiazolo[3,4-c]pyridine] (Mn = 140 kDa) at this degree of chain alignment and structural order is µh ≈ 47 cm(2 )v(-1) s(-1). Our results create a promising pathway toward high performance, solution processable, and low-cost organic electronics.

Silaindacenodithiophene-based molecular donor: morphological features and use in the fabrication of compositionally tolerant, high-efficiency bulk heterojunction solar cells.

A novel solution-processable small molecule, namely, benzo[1,2-b:4,5-b]bis(4,4'-dihexyl-4H-silolo[3,2-b]thiophene-2,2'-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole (p-SIDT(FBTTh2)2), was designed and synthesized by utilizing the silaindacenodithiophene (SIDT) framework as the central D(2) donor unit within the D(1)AD(2)AD(1) chromophore configuration. Relative to the widely studied 7,7'-[4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl]bis[6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole] (p-DTS(FBTTh2)2), which contains the stronger donor fragment dithienosilole (DTS) as D(2), one finds that p-SIDT(FBTTh2)2 exhibits a wider band gap and can be used to fabricate bulk heterojunction solar cells with higher open circuit voltage (0.91 V). Most remarkably, thin films comprising p-SIDT(FBTTh2)2 can achieve exceptional levels of self-organization directly via solution deposition. For example, high-resolution transmission electron microscopy analysis shows that p-SIDT(FBTTh2)2 spin-cast from chlorobenzene organizes into crystalline domains with lattice planes that extend over length scales on the order of hundreds of nanometers. Such features suggest liquid crystalline properties during the evolution of the film. Moreover, grazing incidence wide-angle X-ray scattering analysis shows a strong tendency for the molecules to exist with a strong "face-on" orientation relative to the substrate plane. Similar structural features, albeit of more restricted dimensions, can be observed within p-SIDT(FBTTh2)2:PC71BM bulk heterojunction thin films when the films are processed with 0.4% diiodooctane (DIO) solvent additive. DIO use also increases the solar cell power conversion efficiencies (PCEs) from 1.7% to 6.4%. Of significance from a practical device fabrication perspective is that, for p-SIDT(FBTTh2)2:PC71BM blends, there is a wide range of compositions (from 20:80 to 70:30 p-SIDT(FBTTh2)2:PC71BM) that provide good photovoltaic response, i.e., PCE = 4-6%, indicating a robust tendency to form the necessary continuous phases for charge carrier collection. Light intensity photocurrent measurements, charge selective diode fabrication, and internal quantum efficiency determinations were carried out to obtain insight into the mechanism of device operation. Inclusion of DIO in the casting solution results in films that exhibit much lower photocurrent dependence on voltage and a concomitant increase in fill factor. At the optimum blend ratio, devices show high charge carrier mobilities, while mismatched hole and electron mobilities in blends with high or low donor content result in reduced fill factors and device performance.

Amphiphilic triblock copolymers with PEGylated hydrocarbon structures as environmentally friendly marine antifouling and fouling-release coatings.

The ideal marine antifouling (AF)/fouling-release (FR) coating should be non-toxic, while effectively either resisting the attachment of marine organisms (AF) or significantly reducing their strength of attachment (FR). Many recent studies have shown that amphiphilic polymeric materials provide a promising solution to producing such coatings due to their surface dual functionality. In this work, poly(ethylene glycol) (PEG) of different molecular weights (Mw = 350, 550) was coupled to a saturated difunctional alkyl alcohol to generate amphiphilic surfactants (PEG-hydrocarbon-OH). The resulting macromolecules were then used as side chains to covalently modify a pre-synthesized PS8 K-b-P(E/B)25 K-b-PI10 K (SEBI or K3) triblock copolymer, and the final polymers were applied to glass substrata through an established multilayer surface coating technique to prepare fouling resistant coatings. The coated surfaces were characterized with AFM, XPS and NEXAFS, and evaluated in laboratory assays with two important fouling algae, Ulva linza (a green macroalga) and Navicula incerta, a biofilm-forming diatom. The results suggest that these polymer-coated surfaces undergo surface reconstruction upon changing the contact medium (polymer/air vs polymer/water), due to the preferential interfacial aggregation of the PEG segment on the surface in water. The amphiphilic polymer-coated surfaces showed promising results as both AF and FR coatings. The sample with longer PEG chain lengths (Mw = 550 g mol(-1)) exhibited excellent properties against both algae, highlighting the importance of the chemical structures on ultimate biological performance. Besides reporting synthesis and characterization of this new type of amphiphilic surface material, this work also provides insight into the nature of PEG/hydrocarbon amphiphilic coatings, and this understanding may help in the design of future generations of fluorine-free, environmentally friendly AF/FR polymeric coatings.

A facile synthesis of dynamic, shape-changing polymer particles.

We herein report a new facile strategy to ellipsoidal block copolymer nanoparticles that exhibit a pH-triggered anistropic swelling profile. In a first step, elongated particles with an axially stacked lamellae structure are selectively prepared by utilizing functional surfactants to control the phase separation of symmetric polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) in dispersed droplets. In a second step, the dynamic shape change is realized by cross-linking the P2VP domains, thereby connecting glassy PS discs with pH-sensitive hydrogel actuators.

Striped, ellipsoidal particles by controlled assembly of diblock copolymers.

Control of interfacial interactions leads to a dramatic change in shape and morphology for particles based on poly(styrene-b-2-vinylpyridine) diblock copolymers. Key to these changes is the addition of Au-based surfactant nanoparticles (SNPs) which are adsorbed at the interface between block copolymer-containing emulsion droplets and the surrounding amphiphilic surfactant to afford asymmetric, ellipsoid particles. The mechanism of formation for these novel nanostructures was investigated by systematically varying the volume fraction of SNPs, with the results showing the critical nature that the segregation of SNPs to specific interfaces plays in controlling structure. A theoretical description of the system allows the size distribution and aspect ratio of the asymmetric block copolymer colloidal particles to be correlated with the experimental results.

Time-resolved structural evolution of additive-processed bulk heterojunction solar cells.

Solution deposition using high-boiling-point additives such as octanedithiol (ODT) provides a simple and widely used fabrication option for improving the power conversion efficiencies of solar cells composed of narrow-band-gap conjugated polymer donor/fullerene acceptor blends. Previous examination of the resulting device active layers has shown that the use of additives influences the degree of phase segregation within the bulk heterojunction (BHJ) blend and also improves ordering within the polymeric domains. In this work, in situ grazing-incidence wide-angle X-ray scattering as a function of time was used to explore the dynamics of the BHJ evolution. These studies showed that a small percentage of ODT in chlorobenzene (CB) induced the nucleation of polymeric crystallites within 2 min of deposition, increased the orientational order of specific polymorphs, and promoted further crystallite nucleation over a period longer than 40 min after casting. Similar structural changes did not occur when the same BHJ blend was cast from pure CB.

A modular strategy for fully conjugated donor-acceptor block copolymers.

A novel strategy for the synthesis of fully conjugated donor-acceptor block copolymers, in a single reaction step employing Stille coupling polymerization of end-functional polythiophene and AA + BB monomers, is presented. The unique donor-acceptor structure of these block copolymers provides a rich self-assembly behavior, with the first example of a fully conjugated donor-acceptor block copolymer having two separate crystalline domains being obtained.

Reconstruction of surfaces from mixed hydrocarbon and PEG components in water: responsive surfaces aid fouling release.

Coatings derived from surface active block copolymers (SABCs) having a combination of hydrophobic aliphatic (linear hydrocarbon or propylene oxide-derived groups) and hydrophilic poly(ethlyene glycol) (PEG) side chains have been developed. The coatings demonstrate superior performance against protein adsorption as well as resistance to biofouling, providing an alternative to coatings containing fluorinated side chains as the hydrophobe, thus reducing the potential environmental impact. The surfaces were examined using dynamic water contact angle, captive air-bubble contact angle, atomic force microscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure analysis. The PS(8K)-b-P(E/B)(25K)-b-PI(10K) triblock copolymer precursor (K3) initially dominated the dry surface. In contrast to previous studies with mixed fluorinated/PEG surfaces, these new materials displayed significant surface changes after exposure to water that allowed fouling resistant behavior. PEG groups buried several nanometers below the surface in the dry state were able to occupy the coating surface after placement in water. The resulting surface exhibits a very low contact angle and good antifouling properties that are very different from those of K3. The surfaces are strongly resistant to protein adsorption using bovine serum albumin as a standard protein challenge. Biofouling assays with sporelings of the green alga Ulva and cells of the diatom Navicula showed the level of adhesion was significantly reduced relative to that of a PDMS standard and that of the triblock copolymer precursor of the SABCs.

Controlled supramolecular assembly of micelle-like gold nanoparticles in PS-b-P2VP diblock copolymers via hydrogen bonding.

We report a facile strategy to synthesize amphiphilic gold (Au) nanoparticles functionalized with a multilayer, micelle-like structure consisting of a Au core, an inner hydroxylated polyisoprene (PIOH) layer, and an outer polystyrene shell (PS). Careful control of enthalpic interactions via a systematic variation of structural parameters, such as number of hydroxyl groups per ligand (N(OH)) and styrene repeating units (N(PS)) as well as areal chain density of ligands on the Au-core surface (Σ), enables precise control of the spatial distribution of these nanoparticles. This control was demonstrated in a lamellae-forming poly(styrene-b-2-vinylpyridine) (PS-b-P2VP) diblock copolymer matrix, where the favorable hydrogen-bonding interaction between hydroxyl groups in the PIOH inner shell and P2VP chains in the PS-b-P2VP diblock copolymer matrix, driving the nanoparticles to be segregated in P2VP domains, could be counter balanced by the enthalphic penalty of mixing of the PS outer brush with the P2VP domains. By varying N(OH), N(PS), and Σ, the nanoparticles could be positioned in the PS or P2VP domains or at the PS/P2VP interface. In addition, the effect of additives interfering with the hydrogen-bond formation between hydroxyl groups on Au nanoparticles and P2VP chains in a diblock copolymer matrix was investigated, and an interesting pea-pod-like segregation of Au nanoparticles in PS domains was observed.

Self-assembly of an optically active conjugated oligoelectrolyte.

Conjugated oligoelectrolytes are of emerging technological interest due to their recent function in the fabrication of optoelectronic devices, application in biosensors, and as species that facilitate transmembrane charge migration. Solubility in aqueous, or highly polar, solvents is important for many of these applications; however, there are few studies on how the self-assembly of conjugated oligoelectrolytes into multichromophore species influences linear and nonlinear optical properties. Here, we examine 1,4-bis(4'-(N,N-bis(6''-(N,N,N-trimethylammonium)hexyl)amino)-styryl)benzene tetraiodide (DSBNI) in water, a conjugated oligoelectrolyte based on the distyrylbenzene framework. We find that DSBNI aggregation leads to increased fluorescence lifetimes, coupled with hypsochromic shifts, and larger two-photon absorption cross sections. Liquid atomic force microscopy (AFM) and cryogenic transmission electron microscopy (cryo-TEM) were used to image DSBNI aggregates and to confirm that the planar molecules stack to form nanocylinders above a critical aggregation concentration. Finally, small-angle neutron scattering (SANS) was used to quantify the aggregate dimensions in situ. Comparison of the results highlights that the hydrophilic mica surface used to image via liquid AFM and the high concentrations required for cryo-TEM facilitate the propagation of the cylinders into long fibers. SANS experiments are consistent with equivalent molecular packing geometry but lower aspect ratios. It is therefore possible to understand the evolution of optical properties as a function of concentration and aggregation and the general geometric features of the resulting supramolecular structures.

Regioregular pyridal[2,1,3]thiadiazole π-conjugated copolymers.

π-Conjugated, narrow band gap copolymers containing pyridal[2,1,3]thiadiazole (PT) were synthesized via starting materials that prevent random incorporation of the PT heterocycles relative to the backbone vector. Two regioregular structures could be obtained: in one the PTs are oriented in the same direction, and in the other the orientation of the PTs alternates every other repeat unit. Compared to their regiorandom counterparts, the regioregular polymers exhibit a 2 orders of magnitude increase of the hole mobilites, from 0.005 to 0.6 cm(2) V(-1) s(-1), as determined by field-effect transistor measurements.

A general approach to controlling the surface composition of poly(ethylene oxide)-based block copolymers for antifouling coatings.

To control the surface properties of a polystyrene-block-poly(ethylene oxide) diblock copolymer, perfluorinated chemical moieties were specifically incorporated into the block copolymer backbone. A polystyrene-block-poly[(ethylene oxide)-stat-(allyl glycidyl ether)] [PS-b-P(EO-stat-AGE)] statistical diblock terpolymer was synthesized with varying incorporations of allyl glycidyl ether (AGE) in the poly(ethylene oxide) block from 0 to 17 mol %. The pendant alkenes of the AGE repeat units were subsequently functionalized by thiol-ene chemistry with 1H,1H,2H,2H-perfluorooctanethiol, yielding fluorocarbon-functionalized AGE (fAGE) repeat units. (1)H NMR spectroscopy and size-exclusion chromatography indicated well-defined structures with complete functionalization of the pendant alkenes. The surfaces of the polymer films were characterized after spray coating by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS), showing that the P(EO-stat-fAGE) block starts to compete with polystyrene to populate the surface after only 1 mol % incorporation of fAGE. Increasing the incorporation of fAGE led to an increased amount of perfluorocarbons on the surface and a decrease in the concentration of PS. At a fAGE incorporation of 8 mol %, PS was not detected at the surface, as measured by NEXAFS spectroscopy. Water contact angles measured by the captive-air-bubble technique showed the underwater surfaces to be dynamic, with advancing and receding contact angles varying by >20°. Protein adsorption studies demonstrated that the fluorinated surfaces effectively prevent nonspecific binding of proteins relative to an unmodified PS-b-PEO diblock copolymer. In biological systems, settlement of spores of the green macroalga Ulva was significantly lower for the fAGE-incorporated polymers compared to the unmodified diblock and a polydimethylsiloxane elastomer standard. Furthermore, the attachment strength of sporelings (young plants) of Ulva was also reduced for the fAGE-containing polymers, affirming their potential as fouling-release coatings.

Fluorine-free mixed amphiphilic polymers based on PDMS and PEG side chains for fouling release applications.

Fluorine-free mixed amphiphilic block copolymers with mixtures of short side groups of polydimethyl siloxane (PDMS) and polyethylene glycol (PEG) were synthesized and studied for their ability to influence the surface properties and control the adhesion of marine organisms to coated surfaces. The settlement (attachment) and strength of adhesion of two different marine algae, the green seaweed Ulva and the diatom Navicula, were evaluated against the surfaces. It is known that hydrophobic coatings based on polydimethyl siloxane elastomers (PDMSe) are prone to protein adsorption and accumulation of strongly adherent diatom slimes, in contrast to PEG-based hydrophilic surfaces that inhibit protein adsorption and moderate only weak adhesion of diatoms. By incorporating both PDMS and PEG side chains into the polymers, the effect of incorporating both polar and non-polar groups on fouling-release could be studied. The dry surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). The ability of these mixed amphiphilic polymers to reconstruct in water was examined using underwater bubble contact angle and dynamic water contact angle experiments. To understand more about surface reconstruction behavior, protein adsorption experiments were carried out with fluorescein isothiocyanate-labeled bovine serum albumin (BSA-FITC) on both dry and pre-soaked surfaces.

Binuclear initiators for the telechelic synthesis of elastomeric polyolefins.

Novel binuclear complexes, 4,4'-bis{[N-(2,6-diisopropylphenyl)-2-(2,6-diisopropylphenylimino)propanamidato-κ(2)-N,O-(trimethylphosphine)nickel(II)]methyl}-1,1'-biphenyl (2a) and 4,4'-bis{[N-(2,6-diisopropylphenyl)-2-(2,6-diisopropylphenylimino)-4-methylpentamidato-κ(2)-N,O-(trimethylphosphine)nickel(II)]methyl}-1,1'-biphenyl (2b), were synthesized by linking two nickel centers through a bis(benzyl) fragment. When activated with nickel bis(1,5-cyclooctadiene) (Ni(COD)(2)), 2a and 2b are capable of polymerizing ethylene in a quasi-living fashion, producing polymers with approximately twice the molecular weights relative to those obtained by using a structurally related mononuclear system. In addition, 2b/Ni(COD)(2) was utilized to synthesize a series of pseudo-triblock polyethylene (PE) macroinitiating copolymers, bearing atom-transfer radical polymerization (ATRP) initiators. Pseudo-pentablock copolymers were also prepared by taking advantage of a pressure-pulsing technique, wherein the ethylene pressure was increased from 100 to 500 psi in order to produce semicrystalline ethylene-rich end-blocks. Copolymers with elastomeric properties were synthesized by grafting n-butyl acrylate from the PE macroinitiators via ATRP. Examination using monotonic and step-cyclic stress-strain tests demonstrates that the materials exhibit large strains at break (1600-2000%) and excellent elastic recoveries at large strains (∼80%). That materials with such desirable properties could not be attained using a mononuclear initiator demonstrates the clear advantage of growing the polymer via a telechelic mechanism.

Ketene functionalized polyethylene: control of cross-link density and material properties.

The functionalization and cross-linking of polyethylene is synthetically challenging, commonly relying on highly optimized radical based postpolymerization strategies. To address these difficulties, a norbornene monomer containing Meldrum's acid is shown to be effectively copolymerized with polyethylene using a nickel α-iminocarbaxamidato complex, providing high-melting, semicrystalline polymers with a tunable incorporation of the functional comonomer. Upon heating the copolymer to common polyethylene processing temperatures, the thermolysis of Meldrum's acid to ketene provides the desired reactive group. This simple and versatile methodology does not require small molecule radical sources or catalysts, and the dimerization of the in situ generated ketenes is shown to provide tunable cross-linking densities in polyethylene. Subsequent rheological and tensile experiments illustrate the ability to tune cross-linked polyethylene properties by comonomer incorporation and elucidate valuable structure/property relationships in these materials. This study illustrates the power of well-defined and synthetically accessible functional groups in polyolefin synthesis and functionalization.