Eudicot primary cell wall glucomannan is related in synthesis, structure, and function to xyloglucan.

Hemicellulose polysaccharides influence assembly and properties of the plant primary cell wall (PCW), perhaps by interacting with cellulose to affect the deposition and bundling of cellulose fibrils. However, the functional differences between plant cell wall hemicelluloses such as glucomannan, xylan, and xyloglucan (XyG) remain unclear. As the most abundant hemicellulose, XyG is considered important in eudicot PCWs, but plants devoid of XyG show relatively mild phenotypes. We report here that a patterned ß-galactoglucomannan (ß-GGM) is widespread in eudicot PCWs and shows remarkable similarities to XyG. The sugar linkages forming the backbone and side chains of ß-GGM are analogous to those that make up XyG, and moreover, these linkages are formed by glycosyltransferases from the same CAZy families. Solid-state nuclear magnetic resonance indicated that ß-GGM shows low mobility in the cell wall, consistent with interaction with cellulose. Although Arabidopsis ß-GGM synthesis mutants show no obvious growth defects, genetic crosses between ß-GGM and XyG mutants produce exacerbated phenotypes compared with XyG mutants. These findings demonstrate a related role of these two similar but distinct classes of hemicelluloses in PCWs. This work opens avenues to study the roles of ß-GGM and XyG in PCWs.

Analysis of fungal high-mannose structures using CAZymes.

Glycoengineering ultimately allows control over glycosylation patterns to generate new glycoprotein variants with desired properties. A common challenge is glycan heterogeneity, which may affect protein function and limit the use of key techniques such as mass spectrometry. Moreover, heterologous protein expression can introduce nonnative glycan chains that may not fulfill the requirement for therapeutic proteins. One strategy to address these challenges is partial trimming or complete removal of glycan chains, which can be obtained through selective application of exoglycosidases. Here, we demonstrate an enzymatic O-deglycosylation toolbox of a GH92 α-1,2-mannosidase from Neobacillus novalis, a GH2 ß-galactofuranosidase from Amesia atrobrunnea and the jack bean α-mannosidase. The extent of enzymatic O-deglycosylation was mapped against a full glycosyl linkage analysis of the O-glycosylated linker of cellobiohydrolase I from Trichoderma reesei (TrCel7A). Furthermore, the influence of deglycosylation on TrCel7A functionality was evaluated by kinetic characterization of native and O-deglycosylated forms of TrCel7A. This study expands structural knowledge on fungal O-glycosylation and presents a ready-to-use enzymatic approach for controlled O-glycan engineering in glycoproteins expressed in filamentous fungi.

The effects of obstetric emergency team training on patient outcome: A systematic review and meta-analysis.

INTRODUCTION: Little is known about the optimal simulation-based team training in obstetric emergencies. We aimed to review how simulation-based team training affects patient outcomes in obstetric emergencies. MATERIAL AND METHODS: Search Strategy: MEDLINE, Embase, Cochrane Library, and Cochrane Central Register of Controlled Trials were searched up to and including May 15, 2021. SELECTION CRITERIA: randomized controlled trials (RCTs) and cohort studies on obstetric teams in high-resource settings comparing the effect of simulation-based obstetric emergency team training with no training on the risk of Apgar scores less than 7 at 5 min, neonatal hypoxic ischemic encephalopathy, severe postpartum hemorrhage, blood transfusion of four or more units, and delay of emergency cesarean section by more than 30 min. DATA COLLECTION AND ANALYSIS: The included studies were assessed using PRISMA, EPCO, and GRADE. RESULTS: We found 21 studies, four RCTs and 17 cohort studies, evaluating patient outcomes after obstetric team training compared with no training. Annual obstetric emergency team training may reduce brachial plexus injury (six cohort studies: odds ratio [OR] 0.47, 95% CI 0.33-0.68; one RCT: OR 1.30, 95 CI% 0.39-4.33, low certainty evidence) and suggest a positive effect; but it was not significant on Apgar score below 7 at 5 min (three cohort studies: OR 0.77, 95% CI 0.51-1.19; two RCT: OR 0.87, 95% CI 0.72-1.05, moderate certainty evidence). The effect was unclear for hypoxic ischemic encephalopathy, umbilical prolapse, decision to birth interval in emergency cesarean section, and for severe postpartum hemorrhage. Studies with in situ multi-professional simulation-based training demonstrated the best effect. CONCLUSIONS: Emerging evidence suggests an effect of obstetric team training on obstetric outcomes, but conflicting results call for controlled trials targeted to identify the optimal methodology for effective team training.

Two Subgroups within the GH43_36 α-l-Arabinofuranosidase Subfamily Hydrolyze Arabinosyl from Either Mono-or Disubstituted Xylosyl Units in Wheat Arabinoxylan.

Fungal arabinofuranosidases (ABFs) catalyze the hydrolysis of arabinosyl substituents (Ara) and are key in the interplay with other glycosyl hydrolases to saccharify arabinoxylans (AXs). Most characterized ABFs belong to GH51 and GH62 and are known to hydrolyze the linkage of α-(1→2)-Ara and α-(1→3)-Ara in monosubstituted xylosyl residues (Xyl) (ABF-m2,3). Nevertheless, in AX a substantial number of Xyls have two Aras (i.e., disubstituted), which are unaffected by ABFs from GH51 and GH62. To date, only two fungal enzymes have been identified (in GH43_36) that specifically release the α-(1→3)-Ara from disubstituted Xyls (ABF-d3). In our research, phylogenetic analysis of available GH43_36 sequences revealed two major clades (GH43_36a and GH43_36b) with an expected substrate specificity difference. The characterized fungal ABF-d3 enzymes aligned with GH43_36a, including the GH43_36 from Humicola insolens (HiABF43_36a). Hereto, the first fungal GH43_36b (from Talaromyces pinophilus) was cloned, purified, and characterized (TpABF43_36b). Surprisingly, TpABF43_36b was found to be active as ABF-m2,3, albeit with a relatively low rate compared to other ABFs tested, and showed minor xylanase activity. Novel specificities were also discovered for the HiABF43_36a, as it also released α-(1→2)-Ara from a disubstitution on the non-reducing end of an arabinoxylooligosaccharide (AXOS), and it was active to a lesser extent as an ABF-m2,3 towards AXOS when the Ara was on the second xylosyl from the non-reducing end. In essence, this work adds new insights into the biorefinery of agricultural residues.

Twelve tips for facilitating and implementing clinical debriefing programmes.

Contemporary clinical practice places a high demand on healthcare workforces due to complexity and rapid evolution of guidelines. We need embedded workplace practices such as clinical debriefing (CD) to support everyday learning and patient care. Debriefing, defined as a 'guided reflective learning conversation', is most often undertaken in small groups following simulation-based experiences. However, emerging evidence suggests that debriefing may also enhance learning in clinical environments where facilitators need to simultaneously balance psychological safety, learning goals and emotional well-being. This twelve tips article summarises international experience collated at the recent Association for Medical Education in Europe (AMEE) debriefing symposium. These tips encompass the benefits of CD, as well as suggested approach to facilitation. Successful CD programmes are frequently team focussed, interdisciplinary, implemented in stages and use a clear structure.

Catalytic Diversity of GH30 Xylanases.

Catalytic properties of GH30 xylanases belonging to subfamilies 7 and 8 were compared on glucuronoxylan, modified glucuronoxylans, arabinoxylan, rhodymenan, and xylotetraose. Most of the tested bacterial GH30-8 enzymes are specific glucuronoxylanases (EC 3.2.1.136) requiring for action the presence of free carboxyl group of MeGlcA side residues. These enzymes were not active on arabinoxylan, rhodymenan and xylotetraose, and conversion of MeGlcA to its methyl ester or its reduction to MeGlc led to a remarkable drop in their specific activity. However, some GH30-8 members are nonspecific xylanases effectively hydrolyzing all tested substrates. In terms of catalytic activities, the GH30-7 subfamily is much more diverse. In addition to specific glucuronoxylanases, the GH30-7 subfamily contains nonspecific endoxylanases and predominantly exo-acting enzymes. The activity of GH30-7 specific glucuronoxylanases also depend on the presence of the MeGlcA carboxyl, but not so strictly as in bacterial enzymes. The modification of the carboxyl group of glucuronoxylan had only weak effect on the action of predominantly exo-acting enzymes, as well as nonspecific xylanases. Rhodymenan and xylotetraose were the best substrates for exo-acting enzymes, while arabinoxylan represented hardly degradable substrate for almost all tested GH30-7 enzymes. The results expand current knowledge on the catalytic properties of this relatively novel group of xylanases.

Non-Specific GH30_7 Endo-ß-1,4-xylanase from Talaromyces leycettanus.

This study describes the catalytic properties of a GH30_7 xylanase produced by the fungus Talaromyces leycettanus. The enzyme is an ando-ß-1,4-xylanase, showing similar specific activity towards glucuronoxylan, arabinoxylan, and rhodymenan (linear ß-1,3-ß-1,4-xylan). The heteroxylans are hydrolyzed to a mixture of linear as well as branched ß-1,4-xylooligosaccharides that are shorter than the products generated by GH10 and GH11 xylanases. In the rhodymenan hydrolyzate, the linear ß-1,4-xylooligosaccharides are accompanied with a series of mixed linkage homologues. Initial hydrolysis of glucuronoxylan resembles the action of other GH30_7 and GH30_8 glucuronoxylanases, resulting in a series of aldouronic acids of a general formula MeGlcA2Xyln. Due to the significant non-specific endoxylanase activity of the enzyme, these acidic products are further attacked in the unbranched regions, finally yielding MeGlcA2Xyl2-3. The accommodation of a substituted xylosyl residue in the -2 subsite also applies in arabinoxylan depolymerization. Moreover, the xylose residue may be arabinosylated at both positions 2 and 3, without negatively affecting the main chain cleavage. The catalytic properties of the enzyme, particularly the great tolerance of the side-chain substituents, make the enzyme attractive for biotechnological applications. The enzyme is also another example of extraordinarily great catalytic diversity among eukaryotic GH30_7 xylanases.

A carbohydrate-binding family 48 module enables feruloyl esterase action on polymeric arabinoxylan.

Feruloyl esterases (EC 3.1.1.73), belonging to carbohydrate esterase family 1 (CE1), hydrolyze ester bonds between ferulic acid (FA) and arabinose moieties in arabinoxylans. Recently, some CE1 enzymes identified in metagenomics studies have been predicted to contain a family 48 carbohydrate-binding module (CBM48), a CBM family associated with starch binding. Two of these CE1s, wastewater treatment sludge (wts) Fae1A and wtsFae1B isolated from wastewater treatment surplus sludge, have a cognate CBM48 domain and are feruloyl esterases, and wtsFae1A binds arabinoxylan. Here, we show that wtsFae1B also binds to arabinoxylan and that neither binds starch. Surface plasmon resonance analysis revealed that wtsFae1B's Kd for xylohexaose is 14.8 µm and that it does not bind to starch mimics, ß-cyclodextrin, or maltohexaose. Interestingly, in the absence of CBM48 domains, the CE1 regions from wtsFae1A and wtsFae1B did not bind arabinoxylan and were also unable to catalyze FA release from arabinoxylan. Pretreatment with a ß-d-1,4-xylanase did enable CE1 domain-mediated FA release from arabinoxylan in the absence of CBM48, indicating that CBM48 is essential for the CE1 activity on the polysaccharide. Crystal structures of wtsFae1A (at 1.63 Å resolution) and wtsFae1B (1.98 Å) revealed that both are folded proteins comprising structurally-conserved hydrogen bonds that lock the CBM48 position relative to that of the CE1 domain. wtsFae1A docking indicated that both enzymes accommodate the arabinoxylan backbone in a cleft at the CE1-CBM48 domain interface. Binding at this cleft appears to enable CE1 activities on polymeric arabinoxylan, illustrating an unexpected and crucial role of CBM48 domains for accommodating arabinoxylan.

A biochemical comparison of fungal GH6 cellobiohydrolases.

Cellobiohydrolases (CBHs) from glycoside hydrolase family 6 (GH6) make up an important part of the secretome in many cellulolytic fungi. They are also of technical interest, particularly because they are part of the enzyme cocktails that are used for the industrial breakdown of lignocellulosic biomass. Nevertheless, functional studies of GH6 CBHs are scarce and focused on a few model enzymes. To elucidate functional breadth among GH6 CBHs, we conducted a comparative biochemical study of seven GH6 CBHs originating from fungi living in different habitats, in addition to one enzyme variant. The enzyme sequences were investigated by phylogenetic analyses to ensure that they were not closely related phylogenetically. The selected enzymes were all heterologously expressed in Aspergillus oryzae, purified and thoroughly characterized biochemically. This approach allowed direct comparisons of functional data, and the results revealed substantial variability. For example, the adsorption capacity on cellulose spanned two orders of magnitude and kinetic parameters, derived from two independent steady-state methods also varied significantly. While the different functional parameters covered wide ranges, they were not independent since they changed in parallel between two poles. One pole was characterized by strong substrate interactions, high adsorption capacity and low turnover number while the other showed weak substrate interactions, poor adsorption and high turnover. The investigated enzymes essentially defined a continuum between these two opposites, and this scaling of functional parameters raises interesting questions regarding functional plasticity and evolution of GH6 CBHs.

Basic life support training: Demonstration versus lecture - A randomised controlled trial.

INTRODUCTION: Basic life support (BLS) and the use of an automated external defibrillator (AED) improve survival from cardiac arrest. The gold standard for teaching BLS/AED is yet to be identified. The aim of this study was to compare the learning outcome of an instructor-led demonstration with a formal lecture for introducing BLS/AED skills. We hypothesized that a demonstration was superior to a lecture. METHODS: First year-medical students were randomised to either a demonstration or a lecture using PowerPoint® Presentation for skill introduction during European Resuscitation Council BLS/AED courses. Participants were skill-tested after training and required to perform all skills correctly to pass the test. Finally, all participants were asked to state their preferred teaching method. RESULTS: Overall, 247 participants were included in the analysis (demonstration group: 124, lecture group: 123). Pass rate was 63% in both groups, p = 1.00. Both groups performed median compression rates within guidelines recommendations, p = 0.09. Mean compression depth was 55 mm (10 mm) in the demonstration group compared with 52 mm (10 mm) in the lecture group, p = 0.05. Median tidal volume was 265 (192, 447) ml and 405 (262, 578) ml, p < 0.001, respectively. The lecture group was 3 s faster at initiating BLS, p < 0.001. In total, 226 (91%) participants preferred demonstration on a manikin for introducing BLS/AED. CONCLUSION: There was no statistically significant difference in pass rate when comparing a demonstration with a lecture for introducing BLS/AED. The lecture group was slightly faster at initiating BLS. Most participants preferred a demonstration as introduction.

Glucuronoyl esterases: diversity, properties and biotechnological potential. A review.

Glucuronoyl esterases (GEs) belonging to the carbohydrate esterase family 15 (CE15) are involved in microbial degradation of lignocellulosic plant materials. GEs are capable of degrading complex polymers of lignin and hemicellulose cleaving ester bonds between glucuronic acid residues in xylan and lignin alcohols. GEs promote separation of lignin, hemicellulose and cellulose which is crucial for efficient utilization of biomass as an energy source and feedstock for further processing into products or chemicals. Genes encoding GEs are found in both fungi and bacteria, but, so far, bacterial GEs are essentially unexplored, and despite being discovered >10 years ago, only a limited number of GEs have been characterized. The first laboratory scale example of improved xylose and glucuronic acid release by the synergistic action of GE with cellulolytic enzymes was only reported recently (improved C5 sugar and glucuronic acid yields) and, until now, not much is known about their biotechnology potential. In this review, we discuss the diversity, structure and properties of microbial GEs and consider the status of their action on natural substrates and in biological systems in relation to their future industrial use.

Glucuronoxylan recognition by GH 30 xylanases: A study with enzyme and substrate variants.

XynA from Erwinia chrysanthemi (EcXyn30A), belonging to glycoside hydrolase family 30 subfamily 8, is specialized for hydrolysis of 4-O-methylglucuronoxylan (GX). Carboxyl group of 4-O-methylglucuronic acid serves as a substrate recognition element interacting ionically with positively charged Arg293 of the enzyme. We determined kinetic parameters of EcXyn30A on GX, its methyl ester (GXE) and 4-O-methylglucoxylan (GXR) and compared them with behavior of the enzyme variant in which Arg293 was replaced by Ala. The modifications of the substrate carboxyl groups resulted in several thousand-fold decrease in catalytic efficiency of EcXyn30A. In contrast, the R293A replacement reduced catalytic efficiency on GX only 18-times. The main difference was in catalytic rate (kcat) which was much lower for EcXyn30A acting on the modified substrates than for the variant which exhibited similar kcat values on all three polymers. The R293A variant cleaved GX, GXE and GXR on the second glycosidic bond from branch towards the reducing end, similarly to EcXyn30A. The R293A replacement caused 15-times decrease in specific activity on MeGlcA3Xyl4, but it did not influence low activity on linear xylooligosaccharides. Docking experiments showed that MeGlcA3Xyl4 and its esterified and reduced forms were bound to both enzymes in analogous way but with different binding energies.

Action of different types of endoxylanases on eucalyptus xylan in situ.

Most studies of the mode of action of industrially important endoxylanases have been done on alkali extracted-plant xylan. In just few cases, the native form of the polysaccharide, acetylated xylan, was used as a substrate. In this work action of xylanases belonging to three glycoside hydrolase families, GH10, GH11, and GH30 was investigated on acetylglucuronoxylan directly in hardwood cell walls. Powdered eucalyptus wood was used as xylanase substrate. Enzyme-generated fragments were characterized by TLC, MALDI ToF MS, and NMR spectroscopy. All three xylanases generated from eucalyptus wood powder acetylated xylooligosaccharides. Those released by GH10 enzyme were the shortest, and those released by GH30 xylanase were of the largest diversity. For GH30 xylanase the 4-O-methyl-D-glucuronic acid (MeGlcA) side residues function as substrate specificity determinants regardless the acetylation of the neighboring hydroxyl group. Much simpler xylooligosaccharide patterns were observed when xylanases were applied in combination with carbohydrate esterase family 6 acetylxylan esterase. In the presence of the esterase, all aldouronic acids remained 3-O-acetylated on the xylopyranosyl (Xylp) residue substituted with MeGlcA. The 3-O-acetyl group, in contrast to the acetyl groups of otherwise unsubstituted Xylp residues, does not affect the mode of action of endoxylanases, but contributes to recalcitrance of the acidic xylan fragments. The results confirm importance of acetylxylan esterases in microbial degradation of acetylated hardwood glucuronoxylan. They also point to still unresolved question of efficient enzymatic removal of the 3-O-acetyl group on MeGlcA-substituted Xylp residues negatively affecting the saccharification yields.

ß-Mannanase-catalyzed synthesis of alkyl mannooligosides.

ß-Mannanases catalyze the conversion and modification of ß-mannans and may, in addition to hydrolysis, also be capable of transglycosylation which can result in enzymatic synthesis of novel glycoconjugates. Using alcohols as glycosyl acceptors (alcoholysis), ß-mannanases can potentially be used to synthesize alkyl glycosides, biodegradable surfactants, from renewable ß-mannans. In this paper, we investigate the synthesis of alkyl mannooligosides using glycoside hydrolase family 5 ß-mannanases from the fungi Trichoderma reesei (TrMan5A and TrMan5A-R171K) and Aspergillus nidulans (AnMan5C). To evaluate ß-mannanase alcoholysis capacity, a novel mass spectrometry-based method was developed that allows for relative comparison of the formation of alcoholysis products using different enzymes or reaction conditions. Differences in alcoholysis capacity and potential secondary hydrolysis of alkyl mannooligosides were observed when comparing alcoholysis catalyzed by the three ß-mannanases using methanol or 1-hexanol as acceptor. Among the three ß-mannanases studied, TrMan5A was the most efficient in producing hexyl mannooligosides with 1-hexanol as acceptor. Hexyl mannooligosides were synthesized using TrMan5A and purified using high-performance liquid chromatography. The data suggests a high selectivity of TrMan5A for 1-hexanol as acceptor over water. The synthesized hexyl mannooligosides were structurally characterized using nuclear magnetic resonance, with results in agreement with their predicted ß-conformation. The surfactant properties of the synthesized hexyl mannooligosides were evaluated using tensiometry, showing that they have similar micelle-forming properties as commercially available hexyl glucosides. The present paper demonstrates the possibility of using ß-mannanases for alkyl glycoside synthesis and increases the potential utilization of renewable ß-mannans.

In a bed or on the floor? - The effect of realistic hospital resuscitation training: A randomised controlled trial.

INTRODUCTION: In-hospital cardiac arrest has a poor prognosis and often occurs in patients lying in a hospital bed. A bed mattress is a soft compressible surface that may decrease cardiopulmonary resuscitation (CPR) quality. Often hospital CPR training is performed with a manikin on the floor. AIM: To study CPR quality following realistic CPR training with a manikin in a bed compared with one on the floor. METHODS: We conducted a randomised controlled study. Healthcare professionals were randomised to CPR training with a manikin in a hospital bed or one on the floor. Data on CPR quality was collected from manikins. The primary outcome measure was chest compression depth. RESULTS: In total, 108 healthcare professionals (age: 40years, female: 94%) were included. The mean chest compression depth was 39mm (standard deviation (SD): 10), for the bed group compared with 38mm (SD: 9) for the floor group, p=0.49. A post hoc analysis showed that regardless of the training method, the participants who optimised their working position by jumping onto the bed or lowering the bed had a median chest compression depth of 39mm (25th-75th percentiles: 33-45) compared with 29mm (25th-75th percentiles: 23-41) for participants who did neither, p=0.04. CONCLUSION: There was no significant difference in chest compression depth between healthcare professionals who trained CPR on a manikin in a hospital bed compared with one on the floor. Chest compression depth was too shallow in both groups. Irrespective of the training method, participants who optimised their working position performed deeper chest compressions.

Enzymatic degradation of lignin-carbohydrate complexes (LCCs): model studies using a fungal glucuronoyl esterase from Cerrena unicolor.

Lignin-carbohydrate complexes (LCCs) are believed to influence the recalcitrance of lignocellulosic plant material preventing optimal utilization of biomass in e.g. forestry, feed and biofuel applications. The recently emerged carbohydrate esterase (CE) 15 family of glucuronoyl esterases (GEs) has been proposed to degrade ester LCC bonds between glucuronic acids in xylans and lignin alcohols thereby potentially improving delignification of lignocellulosic biomass when applied in conjunction with other cellulases, hemicellulases and oxidoreductases. Herein, we report the synthesis of four new GE model substrates comprising α- and É£-arylalkyl esters representative of the lignin part of naturally occurring ester LCCs as well as the cloning and purification of a novel GE from Cerrena unicolor (CuGE). Together with a known GE from Schizophyllum commune (ScGE), CuGE was biochemically characterized by means of Michaelis-Menten kinetics with respect to substrate specificity using the synthesized compounds. For both enzymes, a strong preference for 4-O-methyl glucuronoyl esters rather than unsubstituted glucuronoyl esters was observed. Moreover, we found that α-arylalkyl esters of methyl α-D-glucuronic acid are more easily cleaved by GEs than their corresponding É£-arylalkyl esters. Furthermore, our results suggest a preference of CuGE for glucuronoyl esters of bulky alcohols supporting the suggested biological action of GEs on LCCs. The synthesis of relevant GE model substrates presented here may provide a valuable tool for the screening, selection and development of industrially relevant GEs for delignification of biomass.

Introducing endo-xylanase activity into an exo-acting arabinofuranosidase that targets side chains.

The degradation of the plant cell wall by glycoside hydrolases is central to environmentally sustainable industries. The major polysaccharides of the plant cell wall are cellulose and xylan, a highly decorated ß-1,4-xylopyranose polymer. Glycoside hydrolases displaying multiple catalytic functions may simplify the enzymes required to degrade plant cell walls, increasing the industrial potential of these composite structures. Here we test the hypothesis that glycoside hydrolase family 43 (GH43) provides a suitable scaffold for introducing additional catalytic functions into enzymes that target complex structures in the plant cell wall. We report the crystal structure of Humicola insolens AXHd3 (HiAXHd3), a GH43 arabinofuranosidase that hydrolyses O3-linked arabinose of doubly substituted xylans, a feature of the polysaccharide that is recalcitrant to degradation. HiAXHd3 displays an N-terminal five-bladed ß-propeller domain and a C-terminal ß-sandwich domain. The interface between the domains comprises a xylan binding cleft that houses the active site pocket. Substrate specificity is conferred by a shallow arabinose binding pocket adjacent to the deep active site pocket, and through the orientation of the xylan backbone. Modification of the rim of the active site introduces endo-xylanase activity, whereas the resultant enzyme variant, Y166A, retains arabinofuranosidase activity. These data show that the active site of HiAXHd3 is tuned to hydrolyse arabinofuranosyl or xylosyl linkages, and it is the topology of the distal regions of the substrate binding surface that confers specificity. This report demonstrates that GH43 provides a platform for generating bespoke multifunctional enzymes that target industrially significant complex substrates, exemplified by the plant cell wall.

Insights into the oxidative degradation of cellulose by a copper metalloenzyme that exploits biomass components.

The enzymatic degradation of recalcitrant plant biomass is one of the key industrial challenges of the 21st century. Accordingly, there is a continuing drive to discover new routes to promote polysaccharide degradation. Perhaps the most promising approach involves the application of "cellulase-enhancing factors," such as those from the glycoside hydrolase (CAZy) GH61 family. Here we show that GH61 enzymes are a unique family of copper-dependent oxidases. We demonstrate that copper is needed for GH61 maximal activity and that the formation of cellodextrin and oxidized cellodextrin products by GH61 is enhanced in the presence of small molecule redox-active cofactors such as ascorbate and gallate. By using electron paramagnetic resonance spectroscopy and single-crystal X-ray diffraction, the active site of GH61 is revealed to contain a type II copper and, uniquely, a methylated histidine in the copper's coordination sphere, thus providing an innovative paradigm in bioinorganic enzymatic catalysis.

Integration of subcritical water extraction and treatment with xylanases and feruloyl esterases maximises release of feruloylated arabinoxylans from wheat bran.

Wheat bran is an abundant and low valued agricultural feedstock rich in valuable biomolecules as arabinoxylans (AX) and ferulic acid with important functional and biological properties. An integrated bioprocess combining subcritical water extraction (SWE) and enzymatic treatments has been developed for maximised recovery of feruloylated arabinoxylans and oligosaccharides from wheat bran. A minimal enzymatic cocktail was developed combining one xylanase from different glycosyl hydrolase families and a feruloyl esterase. The incorporation of xylanolytic enzymes in the integrated SWE bioprocess increased the AX yields up to 75%, higher than traditional alkaline extraction, and SWE or enzymatic treatment alone. The process isolated AX with tailored molecular structures in terms of substitution, molar mass, and ferulic acid, which can be used for structural biomedical applications, food ingredients and prebiotics. This study demonstrates the use of hydrothermal and enzyme technologies for upcycling agricultural side streams into functional bioproducts, contributing to a circular food system.

The association of recent simulation training and clinical experience of team leaders with cardiopulmonary resuscitation quality during in-hospital cardiac arrest.

OBJECTIVE: We aimed to investigate the association of recent team leader simulation training (<6 months) and years of clinical experience (≥4 years) with chest compression quality during in-hospital cardiac arrest (IHCA). METHODS: This cohort study of IHCA in four Danish hospitals included cases with data on chest compression quality and team leader characteristics. We assessed the impact of recent simulation training and experienced team leaders on longest chest compression pause duration (primary outcome), chest compression fraction (CCF), and chest compression rates within guideline recommendations using mixed effects models. RESULTS: Of 157 included resuscitation attempts, 45% had a team leader who recently participated in simulation training and 66% had an experienced team leader. The median team leader experience was 7 years [Q1; Q3: 4; 11]. The median duration of the longest chest compression pause was 16 s [10; 30]. Having a team leader with recent simulation training was associated with significantly shorter longest pause durations (difference: -7.11 s (95%-CI: -12.0; -2.2), p = 0.004), a higher CCF (difference: 3% (95%-CI: 2.0; 4.0%), p < 0.001) and with less guideline compliant chest compression rates (odds ratio: 0.4 (95%-CI: 0.19; 0.84), p = 0.02). Having an experienced team leader was not associated with longest pause duration (difference: -1.57 s (95%-CI: -5.34; 2.21), p = 0.42), CCF (difference: 0.7% (95%-CI: -0.3; 1.7), p = 0.17) or chest compression rates within guideline recommendations (odds ratio: 1.55 (95%-CI: 0.91; 2.66), p = 0.11). CONCLUSION: Recent simulation training of team leaders, but not years of team leader experience, was associated with shorter chest compression pauses during IHCA.