RESUMO
Natural alkaloids, a large class of plant-derived substances, have attracted considerable interest because of their pharmacological activities. In this study, the in vivo pharmacokinetics and anti-inflammatory profile of anatabine, a naturally occurring alkaloid, were characterized in rodents. Anatabine was found to be bioavailable and brain-penetrant following systemic administration. Following intraperitoneal (i.p.) administration (1, 2, and 5 mg/kg), anatabine caused a dose-dependent reduction in carrageenan-induced paw edema in rats; in mice, it inhibited the production of pro-inflammatory cytokines and simultaneously elevated the levels of an anti-inflammatory cytokine in a dose-dependent manner 2 h after lipopolysaccharide challenge. Furthermore, anatabine (â¼10 and â¼20 mg/kg/day for 4 weeks; inhalation exposure) had effects in a murine model of multiple sclerosis, reducing neurological deficits and bodyweight loss. Comparative studies of the pharmacokinetics and anti-inflammatory activity of anatabine demonstrated its bioequivalence in rats following i.p. administration and inhalation exposure. This study not only provides the first detailed profile of anatabine pharmacokinetics in rodents but also comprehensively characterizes the anti-inflammatory activities of anatabine in acute and chronic inflammatory models. These findings provide a basis for further characterizing and optimizing the anti-inflammatory properties of anatabine.
Assuntos
Alcaloides/farmacologia , Anti-Inflamatórios/farmacologia , Piridinas/farmacologia , Alcaloides/farmacocinética , Animais , Anti-Inflamatórios/farmacocinética , Encéfalo/metabolismo , Carragenina , Citocinas , Edema/tratamento farmacológico , Encefalomielite Autoimune Experimental/tratamento farmacológico , Feminino , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Piridinas/farmacocinética , Ratos , Ratos WistarRESUMO
Cigarette smoking is the major cause of chronic obstructive pulmonary disease. Considerable attention has been paid to the reduced harm potential of nicotine-containing inhalable products such as electronic cigarettes (e-cigarettes). We investigated the effects of mainstream cigarette smoke (CS) and e-vapor aerosols (containing nicotine and flavor) generated by a capillary aerosol generator on emphysematous changes, lung function, and molecular alterations in the respiratory system of female Apoe-/- mice. Mice were exposed daily (3 h/day, 5 days/week) for 6 months to aerosols from three different e-vapor formulations-(1) carrier (propylene glycol and vegetable glycerol), (2) base (carrier and nicotine), or (3) test (base and flavor)-or to CS from 3R4F reference cigarettes. The CS and base/test aerosol concentrations were matched at 35 µg nicotine/L. CS exposure, but not e-vapor exposure, led to impairment of lung function (pressure-volume loop area, A and K parameters, quasi-static elastance and compliance) and caused marked lung inflammation and emphysematous changes, which were confirmed histopathologically and morphometrically. CS exposure caused lung transcriptome (activation of oxidative stress and inflammatory responses), lipidome, and proteome dysregulation and changes in DNA methylation; in contrast, these effects were substantially reduced in response to the e-vapor aerosol exposure. Compared with sham, aerosol exposure (carrier, base, and test) caused a slight impact on lung inflammation and epithelia irritation. Our results demonstrated that, in comparison with CS, e-vapor aerosols induced substantially lower biological and pathological changes in the respiratory tract associated with chronic inflammation and emphysema.
Assuntos
Sistemas Eletrônicos de Liberação de Nicotina , Nicotiana/toxicidade , Fumaça , Aerossóis , Animais , Apolipoproteínas E/metabolismo , Feminino , Exposição por Inalação , Pulmão , Camundongos , Nicotina , Testes de Função Respiratória , Fumar , Produtos do Tabaco , TranscriptomaRESUMO
Cigarette smoking is one major modifiable risk factor in the development and progression of chronic obstructive pulmonary disease and cardiovascular disease. To characterize and compare cigarette smoke (CS)-induced disease endpoints after exposure in either whole-body (WB) or nose-only (NO) exposure systems, we exposed apolipoprotein E-deficient mice to filtered air (Sham) or to the same total particulate matter (TPM) concentration of mainstream smoke from 3R4F reference cigarettes in NO or WB exposure chambers (EC) for 2 months. At matching TPM concentrations, we observed similar concentrations of carbon monoxide, acetaldehyde, and acrolein, but higher concentrations of nicotine and formaldehyde in NOEC than in WBEC. In both exposure systems, CS exposure led to the expected adaptive changes in nasal epithelia, altered lung function, lung inflammation, and pronounced changes in the nasal epithelial transcriptome and lung proteome. Exposure in the NOEC caused generally more severe histopathological changes in the nasal epithelia and a higher stress response as indicated by body weight decrease and lower blood lymphocyte counts compared with WB exposed mice. Erythropoiesis, and increases in total plasma triglyceride levels and atherosclerotic plaque area were observed only in CS-exposed mice in the WBEC group but not in the NOEC group. Although the composition of CS in the breathing zone is not completely comparable in the two exposure systems, the CS-induced respiratory disease endpoints were largely confirmed in both systems, with a higher magnitude of severity after NO exposure. CS-accelerated atherosclerosis and other pro-atherosclerotic factors were only significant in WBEC.
Assuntos
Absorção Fisiológica , Apolipoproteínas/efeitos dos fármacos , Apolipoproteínas/metabolismo , Doenças Cardiovasculares/induzido quimicamente , Fumar Cigarros/efeitos adversos , Exposição por Inalação , Pneumopatias/induzido quimicamente , Fumaça/efeitos adversos , Animais , Doenças Cardiovasculares/fisiopatologia , Modelos Animais de Doenças , Pneumopatias/fisiopatologia , Masculino , CamundongosRESUMO
Smoking cigarettes is harmful to the cardiovascular system. Considerable attention has been paid to the reduced harm potential of alternative nicotine-containing inhalable products such as e-cigarettes. We investigated the effects of E-vapor aerosols or cigarette smoke (CS) on atherosclerosis progression, cardiovascular function, and molecular changes in the heart and aorta of female apolipoprotein E-deficient (ApoE-/-) mice. The mice were exposed to aerosols from three different E-vapor formulations: 1) carrier (propylene glycol and vegetable glycerol), 2) base (carrier and nicotine), or 3) test (base and flavor) or to CS from 3R4F reference cigarettes for up to 6 mo. Concentrations of CS and base or test aerosols were matched at 35 µg nicotine/L. Exposure to CS, compared with sham-exposed fresh air controls, accelerated atherosclerotic plaque formation, whereas no such effect was seen for any of the three E-vapor aerosols. Molecular changes indicated disease mechanisms related to oxidative stress and inflammation in general, plus changes in calcium regulation, and altered cytoskeletal organization and microtubule dynamics in the left ventricle. While ejection fraction, fractional shortening, cardiac output, and isovolumic contraction time remained unchanged following E-vapor aerosols exposure, the nicotine-containing base and test aerosols caused an increase in isovolumic relaxation time similar to CS. A nicotine-related increase in pulse wave velocity and arterial stiffness was also observed, but it was significantly lower for base and test aerosols than for CS. These results demonstrate that in comparison with CS, E-vapor aerosols induce substantially lower biological responses associated with smoking-related cardiovascular diseases.NEW & NOTEWORTHY Analysis of key urinary oxidative stress markers and proinflammatory cytokines showed an absence of oxidative stress and inflammation in the animals exposed to E-vapor aerosols. Conversely, animals exposed to conventional cigarette smoke had high urinary levels of these markers. When compared with conventional cigarette smoke, E-vapor aerosols induced smaller atherosclerotic plaque surface area and volume. Systolic and diastolic cardiac function, as well as endothelial function, were further significantly less affected by electronic cigarette aerosols than conventional cigarette smoke. Molecular analysis demonstrated that E-vapor aerosols induce significantly smaller transcriptomic dysregulation in the heart and aorta compared with conventional cigarette smoke.
Assuntos
Aerossóis/toxicidade , Aterosclerose/etiologia , Doenças Cardiovasculares/etiologia , Vapor do Cigarro Eletrônico/toxicidade , Coração/efeitos dos fármacos , Fumaça/efeitos adversos , Animais , Apolipoproteínas E/genética , Aterosclerose/metabolismo , Aterosclerose/patologia , Doenças Cardiovasculares/metabolismo , Doenças Cardiovasculares/patologia , Progressão da Doença , Feminino , Exposição por Inalação , Camundongos , Camundongos Knockout , Miocárdio/metabolismo , Miocárdio/patologia , Estresse Oxidativo/efeitos dos fármacosRESUMO
Chemical and physical characterization of transported evolving aerosols in an in vitro system is complex. The challenges include appropriate sampling sensitivity, measurement capabilities, and performing online measurements of constituents in the flowing aerosol during exposure. We assessed the performance of single-photon ionization mass spectrometry in measuring aerosol properties within an in vitro aerosol exposure system. The sampling efficiency of the instrument was studied under three protocols to capture the evolving aerosol process inside the exposure system, and it was evaluated using computational fluid dynamics modeling. The changes in the aerosol as dilution is applied show not only a reduction in concentration of the traced substances but also selective sampling due to evolution of the aerosol and (gas/liquid) phase partitioning of the substances forming the aerosol or a change in the aerosol properties. These effects have potentially a direct impact on the delivered dose, as aerosol deposition is dependent on particle size. Dilution affects the chemical concentration of the substances as well as the interconnected physical properties of the aerosol; therefore, the experimental design of in vitro studies should not only report the dilution flow rates but also details of the applied dilution protocol. This adds a layer of complexity to the design and comparison of studies. We also discuss the potential and limitations of single-photon ionization mass spectrometry as a tool in in vitro monitoring of aerosols.
Assuntos
Aerossóis/administração & dosagem , Aerossóis/análise , Exposição Ambiental/análise , Monitoramento Ambiental , Fótons , Espectrometria de Massas , Tamanho da PartículaRESUMO
Cigarette smoke (CS) exposure is one of the leading risk factors for human health. Nicotine-containing inhalable products, such as e-cigarettes, can effectively support tobacco harm reduction approaches. However, there are limited comparative data on the effects of the aerosols generated from electronic vapor products (e-vapor) and CS on bone. Here, we report the effects of e-vapor aerosols and CS on bone morphology, structure, and strength in a 6-month inhalation study. Eight-week-old ApoE-/- mice were exposed to aerosols from three different e-vapor formulations-CARRIER (propylene glycol and vegetable glycerol), BASE (CARRIER and nicotine), TEST (BASE and flavor)-to CS from 3R4F reference cigarettes at matched nicotine concentrations (35 µg/L) or to fresh air (Sham) (N = 10 per group). Tibiae were analyzed for bone morphology by µCT imaging, biomechanics by three-point bending, and by histological analysis. CS inhalation caused a significant decrease in cortical and total bone volume fraction and bone density relative to e-vapor aerosols. Additionally, CS exposure caused a decrease in ultimate load and stiffness. In contrast, bone structural and biomechanical parameters were not significantly affected by e-vapor aerosol or Sham exposure. At the dissection time point, there was no significant difference in body weight or tibia bone weight or length among the groups. Histological findings revealed microcracks in cortical bone areas among all exposed groups compared to Sham control. In conclusion, because of the bone-preserving effect of e-vapor aerosols relative to CS exposure, e-vapor products could potentially constitute less harmful alternatives to cigarettes in situations in which bone health is of importance.
Assuntos
Osso e Ossos/efeitos dos fármacos , Fumar Cigarros/efeitos adversos , Vapor do Cigarro Eletrônico/toxicidade , Sistemas Eletrônicos de Liberação de Nicotina , Fumaça/efeitos adversos , Vaping/efeitos adversos , Animais , Osso e Ossos/diagnóstico por imagem , Osso e Ossos/patologia , Feminino , Exposição por Inalação , Camundongos Knockout para ApoE , Fatores de Tempo , Microtomografia por Raio-XRESUMO
Risk assessment of chemical mixtures has emerged as a focus of research efforts, but traditional toxicology testing in mammals is costly, time-consuming, and subject to ethical scrutiny in the context of recent trends to reduce reliance on animal testing. In this review, which is a summary of presentations given at a workshop in Havana, Cuba, in April 2019, we survey the utility of zebra fish as an alternative laboratory model in whole-mixture and component-based testing, as well as in vitro modeling in 3-dimensional organotypic cultures from primary human cells cultured at the air-liquid interface and organ-on-a-chip platforms. Finally, we discuss the complexities of assessing the dynamics and delivery of multispecies liquid aerosol mixtures along the human respiratory tract, with examples of alternative and computational approaches to aerosol dosimetry. The workshop contributed to the professional development of Cuban toxicologists, an underserved segment of the global scientific community, delivering a set of tools and recommendations that could potentially provide cost-effective solutions for scientists with limited research resources.
Assuntos
Alternativas aos Testes com Animais , Interações Medicamentosas , Medição de Risco , Aerossóis , Animais , Cuba , Humanos , Sistema Respiratório/efeitos dos fármacos , Produtos do Tabaco/toxicidadeRESUMO
Direct physicochemical interactions between the major components of electronic cigarette liquids (e-liquids): glycerol (VG) and propylene glycol (PG), and lung surfactant (LS) were studied by determining the dynamic surface tension under a simulated breathing cycle using drop shape method. The studies were performed for a wide range of concentrations based on estimated doses of e-liquid aerosols (up to 2500 × the expected nominal concentrations) and for various VG/PG ratios. The results are discussed as relationships among mean surface tension, surface tension amplitude, and surface rheological properties (dilatational elasticity and viscosity) versus concentration and composition of e-liquid. The results showed that high local concentrations (>200 × higher than the estimated average dose after a single puffing session) may induce measurable changes in biophysical activity of LS; however, only ultra-high e-liquid concentrations inactivated the surfactant. Physiochemical characterization of e-liquids provide additional insights for the safety assessment of electronic nicotine delivery systems (ENDS).
Assuntos
Produtos Biológicos/química , Sistemas Eletrônicos de Liberação de Nicotina , Glicerol/química , Propilenoglicol/química , Vaping , Aerossóis , Simulação por Computador , Elasticidade , Glicerol/administração & dosagem , Glicerol/efeitos adversos , Exposição por Inalação , Modelos Químicos , Análise Numérica Assistida por Computador , Propilenoglicol/administração & dosagem , Propilenoglicol/efeitos adversos , Medição de Risco , Tensão Superficial , Vaping/efeitos adversos , ViscosidadeRESUMO
Inhalation of aerosols generated by electronic cigarettes leads to deposition of multiple chemical compounds in the human airways. In this work, an experimental method to determine regional deposition of multicomponent aerosols in an in vitro segmented, realistic human lung geometry was developed and applied to two aerosols, i.e. a monodisperse glycerol aerosol and a multicomponent aerosol. The method comprised the following steps: (1) lung cast model preparation, (2) aerosol generation and exposure, (3) extraction of deposited mass, (4) chemical quantification and (5) data processing. The method showed good agreement with literature data for the deposition efficiency when using a monodisperse glycerol aerosol, with a mass median aerodynamic diameter (MMAD) of 2.3 µm and a constant flow rate of 15 L/min. The highest deposition surface density rate was observed in the bifurcation segments, indicating inertial impaction deposition. The experimental method was also applied to the deposition of a nebulized multicomponent aerosol with a MMAD of 0.50 µm and a constant flow rate of 15 L/min. The deposited amounts of glycerol, propylene glycol and nicotine were quantified. The three analyzed compounds showed similar deposition patterns and fractions as for the monodisperse glycerol aerosol, indicating that the compounds most likely deposited as parts of the same droplets. The developed method can be used to determine regional deposition for multicomponent aerosols, provided that the compounds are of low volatility. The generated data can be used to validate aerosol deposition simulations and to gain insight in deposition of electronic cigarette aerosols in human airways.
Assuntos
Aerossóis/farmacocinética , Modelos Anatômicos , Sistema Respiratório/metabolismo , Administração por Inalação , Glicerol/farmacocinética , Humanos , Tamanho da PartículaRESUMO
Numerous commercially available inhalable products claim to improve sleep-wake cycle-related target indications by delivering a wide variety of chemicals like caffeine and melatonin. The resulting exposure-responses from inhaling different doses are unknown and obtaining early understanding of resulting pharmacokinetics is beneficial. This study applied a physiologically based pharmacokinetic modeling approach to predict the inhalation pharmacokinetics of caffeine and melatonin for different target indications related to the sleep-wake cycle. The model predicted rapid systemic delivery of caffeine and melatonin based on airway regional deposition of inhaled aerosol. A low inhaled dose of 1 mg of caffeine resulted in a 72.3-times lower plasma maximal concentration and was predicted to not improve cognitive performance task outcomes compared to oral consumption of coffee containing 80 mg of caffeine. Conversely, 2-mg oral and inhaled doses of melatonin under recommended directions of use result in more than 25.1- and 645-times higher plasma concentrations compared to endogenous melatonin, respectively. The recommended doses for inhalation products for potential improvement in the target indications vary widely. Additional research is needed to evaluate the human pharmacokinetics, efficacy, and safety of inhaled products. Given the lack of assessments, inhaled caffeine and melatonin must be consumed with caution as the toxicological concerns are not known and could outweigh the potential beneficial effects.
Assuntos
Cafeína , Melatonina , Humanos , Modelos Biológicos , Administração por Inalação , AerossóisRESUMO
In the past few years, technological advancements enabled the development of novel electronic nicotine delivery systems (ENDS). Several empirical measures such as "nicotine flux" are being proposed to evaluate the abuse liability potential of these products. We explored the applicability of nicotine flux for clinical nicotine pharmacokinetics (PK) and 52-week quit success from cigarettes for a wide range of existing nicotine delivery systems. We found that the differences in nicotine flux for various nicotine delivery systems are not related to changes in PK, as nicotine flux does not capture key physiological properties such as nicotine absorption rate. Further, the 52-week quit success and abuse liability potential of nicotine nasal sprays (high nicotine flux product), and nicotine inhalers (nicotine flux similar to ENDS) are low, suggesting that nicotine flux is a poor metric for the assessment of nicotine delivery systems. PK indices are more dependable for characterizing nicotine delivery systems, and a nicotine plasma C max T max > 1 could improve 52-week quit success from cigarettes. However, a single metric may be inadequate to fully assess the abuse liability potential of nicotine delivery systems and needs to be further studied. A combination of in vitro and in silico approaches could potentially address the factors influencing the inhaled aerosol dosimetry and resulting PK of nicotine to provide early insights for ENDS assessments. Further research is required to understand nicotine dosimetry and PK for ad libitum product use, and abuse liability indicators of nicotine delivery systems. This commentary is intended to (1) highlight the need to think beyond a single empirical metric such as nicotine flux, (2) suggest potential PK-based metrics, (3) suggest the use of in vitro and in silico tools to obtain early insights into inhaled aerosol dosimetry for ENDS, and (4) emphasize the importance of considering comprehensive clinical pharmacology outcomes to evaluate nicotine delivery systems.
RESUMO
Inhalation enables the delivery of drugs directly to the lung, increasing the retention for prolonged exposure and maximizing the therapeutic index. However, the differential regional lung exposure kinetics and systemic pharmacokinetics are not fully known, and their estimation is critical for pulmonary drug delivery. The study evaluates the pharmacokinetics of hydroxychloroquine in different regions of the respiratory tract for multiple routes of administration. We also evaluated the influence of different inhaled formulations on systemic and lung pharmacokinetics by identifying suitable nebulizers followed by early characterization of emitted aerosol physicochemical properties. The salt- and freebase-based formulations required different nebulizers and generated aerosol with different physicochemical properties. An administration of hydroxychloroquine by different routes resulted in varied systemic and lung pharmacokinetics, with oral administration resulting in low tissue concentrations in all regions of the respiratory tract. A nose-only inhalation exposure resulted in higher and sustained lung concentrations of hydroxychloroquine with a lung parenchyma-to-blood ratio of 386 after 1440 min post-exposure. The concentrations of hydroxychloroquine in different regions of the respiratory tract (i.e., nasal epithelium, larynx, trachea, bronchi, and lung parenchyma) varied over time, indicating different retention kinetics. The spatiotemporal distribution of hydroxychloroquine in the lung is different due to the heterogeneity of cell types, varying blood perfusion rate, clearance mechanisms, and deposition of inhaled aerosol along the respiratory tract. In addition to highlighting the varied lung physiology, these results demonstrate the ability of the lung to retain increased levels of inhaled lysosomotropic drugs. Such findings are critical for the development of future inhalation-based therapeutics, aiming to optimize target site exposure, enable precision medicine, and ultimately enhance clinical outcomes.
Assuntos
Hidroxicloroquina , Nebulizadores e Vaporizadores , Ratos , Animais , Hidroxicloroquina/metabolismo , Distribuição Tecidual , Aerossóis , Administração por Inalação , Pulmão/metabolismo , Sistemas de Liberação de MedicamentosRESUMO
Absorption of inhaled compounds can occur from multiple sites based on upper and lower respiratory tract deposition, and clearance mechanisms leading to differential local and systemic pharmacokinetics. Deriving inhaled aerosol dosimetry and local tissue concentrations for nose-only exposure in rodents and inhaled products in humans is challenging. In this study we use inhaled nicotine as an example to identify regional respiratory tract deposition, absorption fractions, and their contribution toward systemic pharmacokinetics in rodents and humans. A physiologically based pharmacokinetic (PBPK) model was constructed to describe the disposition of nicotine and its major metabolite, cotinine. The model description for the lungs was simplified to include an upper respiratory tract region with active mucociliary clearance and a lower respiratory tract region. The PBPK model parameters such as rate of oral absorption, metabolism and clearance were fitted to the published nicotine and cotinine plasma concentrations post systemic administration and oral dosing. The fractional deposition of inhaled aerosol in the upper and lower respiratory tract regions was estimated by fitting the plasma concentrations. The model predicted upper respiratory tract deposition was 63.9% for nose-only exposure to nicotine containing nebulized aqueous aerosol in rats and 60.2% for orally inhaled electronic vapor product in humans. A marked absorption of nicotine from the upper respiratory tract and the gastrointestinal tract for inhaled aqueous aerosol contributed to the differential systemic pharmacokinetics in rats and humans. The PBPK model derived dosimetry shows that the current aerosol dosimetry models with their posteriori application using independent aerosol physicochemical characterization to predict aerosol deposition are insufficient and will need to consider complex interplay of inhaled aerosol evolutionary process. While the study highlights the needs for future research, it provides a preliminary framework for interpreting pharmacokinetics of inhaled aerosols to facilitate the analysis of in vivo exposure-responses for pharmacological and toxicological assessments.
Assuntos
Pulmão , Nicotina , Humanos , Ratos , Animais , Administração por Inalação , Aerossóis/química , Pulmão/metabolismo , Cinética , Modelos BiológicosRESUMO
The capillary aerosol generator (CAG) is operated with the principal of thermal liquid evaporation through heating of e-liquid in the initial phase, followed by nucleation and condensation regulated through a mixture of airflow to generate aerosols, such as in an electronic cigarette (EC). The CAG is particularly useful in generating aerosols of large volumes in a continuous manner, for instances such as in vivo inhalation toxicology studies, where usage of ECs is not feasible. The thermal effects of generating aerosol from the CAG are similar in terms of temperature applied in an EC, thus allowing investigators to assess the vapors of e-liquids at scale and reproducibility. As the operation of the CAG allows users to control critical parameters such as the flow rate of e-liquid, heating temperatures and dilution air flows, it allows investigators to test various e-liquid formulations in a well-controlled device. Properties, such as aerosol particle size, are demonstrated to be regulated with the air flow rate with respect to the e-liquid flow and e-liquid composition. The CAG, however, is limited in assessing common EC-related issues, such as overheating of its elements. We seek to demonstrate that the CAG can generate aerosol that is reproducible and continuous, by assessing the chemical and physical aerosol characteristics with a chosen e-liquid formulation. The protocol describes the operating parameters of liquid flow rate, dilution air-flow rates and operating procedures needing to optimize the aerosol concentration and particle size required for an in vivo toxicology study. Presenting the representative results from the protocol and discussing the challenges and applications of working with a CAG, we demonstrate that CAG can be used in a reproducible fashion. The technology and protocol, that has been developed from prior work, serve as a foundation for future innovations for laboratory-controlled aerosol generation investigations.
Assuntos
Sistemas Eletrônicos de Liberação de Nicotina , Aerossóis , Tamanho da Partícula , Reprodutibilidade dos Testes , VeiasRESUMO
During the coronavirus disease (COVID-19) pandemic, wearing face masks in public spaces became mandatory in most countries. The risk of self-contamination when handling face masks, which was one of the earliest concerns, can be mitigated by adding antiviral coatings to the masks. In the present study, we evaluated the antiviral effectiveness of sodium chloride deposited on a fabric suitable for the manufacturing of reusable cloth masks using techniques adapted to the home environment. We tested eight coating conditions, involving both spraying and dipping methods and three salt dilutions. Influenza A H3N2 virus particles were incubated directly on the salt-coated materials, collected, and added to human 3D airway epithelial cultures. Live virus replication in the epithelia was quantified over time in collected apical washes. Relative to the non-coated material, salt deposits at or above 4.3 mg/cm2 markedly reduced viral replication. However, even for larger quantities of salt, the effectiveness of the coating remained dependent on the crystal size and distribution, which in turn depended on the coating technique. These findings confirm the suitability of salt coating as antiviral protection on cloth masks, but also emphasize that particular attention should be paid to the coating protocol when developing consumer solutions.
Assuntos
COVID-19 , SARS-CoV-2 , Antivirais/farmacologia , COVID-19/prevenção & controle , Humanos , Técnicas In Vitro , Vírus da Influenza A Subtipo H3N2 , Máscaras , Cloreto de Sódio/farmacologiaRESUMO
Inhalation as a route for administering drugs and dietary supplements has garnered significant attention over the past decade. We performed real-time analyses of aerosols using secondary electrospray ionization (SESI) technology interfaced with high-resolution mass spectrometry (HRMS), primarily developed for exhaled breath analysis with the goal to detect the main aerosol constituents. Several commercially available inhalation devices containing caffeine, melatonin, cannabidiol, and vitamin B12 were tested. Chemical characterization of the aerosols produced by these devices enabled detection of the main constituents and screening for potential contaminants, byproducts, and impurities in the aerosol. In addition, a programmable syringe pump was connected to the SESI-HRMS system to monitor aerosolized active pharmaceutical ingredients (APIs) such as chloroquine, hydroxychloroquine, and azithromycin. This setup allowed us to detect caffeine, melatonin, hydroxychloroquine, chloroquine, and cannabidiol in the produced aerosols. Azithromycin and vitamin B12 in the aerosols could not be detected; however, our instrument setup enabled the detection of vitamin B12 breakdown products that were generated during the aerosolization process. Positive control was realized by liquid chromatography-HRMS analyses. The compounds detected in the aerosol were confirmed by exact mass measurements of the protonated and/or deprotonated species, as well as their respective collision-induced dissociation tandem mass spectra. These results reveal the potential wide application of this technology for the real-time monitoring of aerosolized active pharmaceutical ingredients that can be administered through the inhalation route.
Assuntos
Canabidiol , Melatonina , Espectrometria de Massas por Ionização por Electrospray/métodos , Cafeína , Azitromicina , Hidroxicloroquina , Aerossóis/análise , Vitamina B 12RESUMO
In vitro screening for pharmacological activity of existing drugs showed chloroquine and hydroxychloroquine to be effective against severe acute respiratory syndrome coronavirus 2. Oral administration of these compounds to obtain desired pulmonary exposures resulted in dose-limiting systemic toxicity in humans. However, pulmonary drug delivery enables direct and rapid administration to obtain higher local tissue concentrations in target tissue. In this work, inhalable formulations for thermal aerosolization of chloroquine and hydroxychloroquine were developed, and their physicochemical properties were characterized. Thermal aerosolization of 40 mg/mL chloroquine and 100 mg/mL hydroxychloroquine formulations delivered respirable aerosol particle sizes with 0.15 and 0.33 mg per 55 mL puff, respectively. In vitro toxicity was evaluated by exposing primary human bronchial epithelial cells to aerosol generated from Vitrocell. An in vitro exposure to 7.24 µg of chloroquine or 7.99 µg hydroxychloroquine showed no significant changes in cilia beating, transepithelial electrical resistance, and cell viability. The pharmacokinetics of inhaled aerosols was predicted by developing a physiologically based pharmacokinetic model that included a detailed species-specific respiratory tract physiology and lysosomal trapping. Based on the model predictions, inhaling emitted doses comprising 1.5 mg of chloroquine or 3.3 mg hydroxychloroquine three times a day may yield therapeutically effective concentrations in the lung. Inhalation of higher doses further increased effective concentrations in the lung while maintaining lower systemic concentrations. Given the theoretically favorable risk/benefit ratio, the clinical significance for pulmonary delivery of aerosolized chloroquine and hydroxychloroquine to treat COVID-19 needs to be established in rigorous safety and efficacy studies. Graphical abstract.
Assuntos
Antimaláricos/administração & dosagem , Tratamento Farmacológico da COVID-19 , Cloroquina/administração & dosagem , Hidroxicloroquina/administração & dosagem , Modelos Químicos , Administração por Inalação , Animais , Antimaláricos/farmacocinética , Antimaláricos/toxicidade , Células Cultivadas , Avaliação Pré-Clínica de Medicamentos , Humanos , Hidroxicloroquina/farmacocinética , Hidroxicloroquina/toxicidade , Masculino , Camundongos , Pessoa de Meia-Idade , RatosRESUMO
Aerosol dosimetry estimates for mouse strains used as models for human disease are not available, primarily because of the lack of tracheobronchial airway morphometry data. By using micro-CT scans of in-situ prepared lung casts, tracheobronchial airway morphometry for four strains of mice were obtained: Balb/c, AJ, C57BL/6, and Apoe-/- . The automated tracheobronchial airway morphometry algorithms for airway length and diameter were successfully verified against previously published manual and automated tracheobronchial airway morphometry data derived from two identical in-situ Balb/c mouse lung casts. There was also excellent agreement in tracheobronchial airway length and diameter between the automated and manual airway data for the AJ, C57BL/6, and Apoe-/- mice. Differences in branch angle measurements were partially due to the differences in definition between the automated algorithms and manual morphometry techniques. Unlike the manual airway morphometry techniques, the automated algorithms were able to provide a value for inclination to gravity for each airway. Inclusion of an inclination to gravity angle for each airway along with airway length, diameter, and branch angle make the current automated tracheobronchial airway data suitable for use in dosimetry programs that can provide dosimetry estimates for inhaled material. The significant differences in upper tracheobronchial airways between Balb/c mice and between C57BL/6 and Apoe-/- mice highlight the need for mouse strain-specific aerosol dosimetry estimates.
Assuntos
Exposição por Inalação , Traqueia , Aerossóis , Animais , Apolipoproteínas E , Modelos Animais de Doenças , Camundongos , Camundongos Endogâmicos C57BL , Traqueia/diagnóstico por imagem , Microtomografia por Raio-XRESUMO
The dose of inhaled materials delivered to the respiratory tract is to a large extent a function of the kinetics of particle deposition and gas dissolution on or in the airway and lung epithelia, and therefore of the structural and functional properties of the respiratory tract. In vitro aerosol exposure systems commonly do not simulate these properties, which may result in the delivery of non-realistic, non-human-relevant doses of inhalable test substances to the in vitro biological test systems. We developed a new-generation in vitro aerosol exposure system, the InHALES, that can, like the human respiratory tract, actively breathe, operate medical inhalers, or take puffs from tobacco products. Due to its structural and functional similarity to the human respiratory tract, the system is expected to deliver human-relevant doses of inhalable materials to cell cultures representing respiratory tract epithelia. We here describe the proof of concept of the InHALES with respect to aerosol delivery and compatibility with oral, bronchial, and alveolar cell cultures. The results indicate that the system structure and function translate into complex patterns of test atmosphere delivery that, with increasing system complexity, may closely mimic the patterns observable in the human respiratory tract.
Assuntos
Aerossóis/administração & dosagem , Técnicas de Cultura de Células , Pulmão , Modelos Biológicos , Administração por Inalação , Ar , HumanosRESUMO
Understanding aerosol deposition in the human lung is of great significance in pulmonary toxicology and inhalation pharmacology. Adverse effects of inhaled environmental aerosols and pharmacological efficacy of inhaled therapeutics are dependent on aerosol properties as well as person-specific respiratory tract anatomy and physiology. Anatomical geometry and physiological function of human airways depend on age, gender, weight, fitness, health, and disease status. Tools for the generation of the population- and subject-specific virtual airway anatomical geometry based on anthropometric data and physiological vitals are invaluable in respiratory diagnostics, personalized pulmonary pharmacology, and model-based management of chronic respiratory diseases. Here we present a novel protocol and software framework for the generation of subject-specific airways based on anthropometric measurements of the subject's body, using the anatomical input, and the conventional spirometry, providing the functional (physiological) data. This model can be used for subject-specific simulations of respiration physiology, gas exchange, and aerosol inhalation and deposition.