Room-Temperature Activation of the C-H Bond in Methane over Terminal ZnII-Oxyl Species in an MFI Zeolite: A Combined Spectroscopic and Computational Study of the Reactive Frontier Molecular Orbitals and Their Origins.

Oxygenase reactivity toward selective partial oxidation of CH4 to CH3OH requires an atomic oxygen-radical bound to metal (M-O•: oxyl intermediate) that is capable of abstracting an H atom from the significantly strong C-H bond in CH4. Because such a reaction is frequently observed in metal-doped zeolites, it has been recognized that the zeolite provides an environment that stabilizes the M-O• intermediate. However, no experimental data of M-O• have so far been discovered in the zeolite; thus, little is known about the correlation among the state of M-O•, its reactivity for CH4, and the nature of the zeolite environment. Here, we report a combined spectroscopic and computational study of the room-temperature activation of CH4 over ZnII-O• in the MFI zeolite. One ZnII-O• species does perform H-abstraction from CH4 at room temperature. The resultant CH3• species reacts with the other ZnII-O• site to form the ZnII-OCH3 species. The H2O-assisted extraction of surface methoxide yields 29 µmol g-1 of CH3OH with a 94% selectivity. The quantum mechanics (QM)/molecular mechanics (MM) calculation determined the central step as the oxyl-mediated hydrogen atom transfer which requires an activation energy of only 10 kJ mol-1. On the basis of the findings in gas-phase experiments regarding the CH4 activation by the free [M-O•]+ species, the remarkable H-abstraction reactivity of the ZnII-O• species in zeolites was totally rationalized. Additionally, the experimentally validated QM/MM calculation revealed that the zeolite lattice has potential as the ligand to enhance the polarization of the M-O• bond and thereby enables to create effectively the highly reactive M-O• bond required for low-temperature activation of CH4. The present study proposes that tuning of the polarization effect of the anchoring site over heterogeneous catalysts is the valuable way to create the oxyl-based functionality on the heterogeneous catalyst.

Why do zeolites induce an unprecedented electronic state on exchanged metal ions?

Understanding the exact position and the detailed role of the Al array in zeolites is essential for elucidating the origin of unique properties that can be derived from the metal-ion exchanged in zeolite samples and for designing zeolite materials with high efficiency in catalytic and adsorption processes. In this work, we investigate, for the first time, the important role of the Al array in the reactivity observed on the metal-ion exchanged in zeolites on the basis of the calculation method by utilizing the spontaneous heterolytic cleavage of H2 observed experimentally on the Zn2+-ion exchanged in MFI-type zeolites (Zn2+-MFI) as the model reaction. In the case of calculation, two main types of models for considering the Al positions in MFI-type zeolites were adopted: in the first type, the Al atoms with appropriate distances are aligned in the circumferential direction of the straight channel (abbreviated as a circumferentially arrayed Al-Al site); in the second type, the nearest neighbouring Al atoms with appropriate distances are directed toward the straight channel axis (abbreviated as a channel directionally arrayed Al-Al site). Results indicated that the Al-array direction governs the reactivity of Zn2+-MFI. The former type of array well explains the experimental fact that spontaneous and irreversible heterolysis of H2 takes place on Zn2+-MFI, even at room temperature, whereas the latter type of array is less reactive; high activation energy is required for the heterolytic cleavage of H2 (ca. >70 kJ mol-1). A detailed analysis of the geometric and electronic structures of a series of Zn2+-MFI models with various Al-array directions clarified the following facts: the circumferentially arrayed Al-Al site induces an inevitable environment around the Zn2+ site, with the simultaneous existence of both a Lewis acid point (coordinatively unsaturated and distorted Zn2+) and a Lewis base point (the lattice oxygen atom juxtaposed with exchanged Zn2+, which participates in the activation of H2: OjL). It is the circumferentially arrayed Al-Al atoms that confer acidic and basic nature on the metal ion and the lattice oxygen atom (OjL), and ultimately trigger the heterolytic dissociation of H2, even at 300 K.

Identification of a Stable ZnII -Oxyl Species Produced in an MFI Zeolite and Its Reversible Reactivity with O2 at Room Temperature.

Although a terminal oxyl species bound to certain metal ions is believed to be the intermediate for various oxidation reactions, such as O-O bond generation in photosystem II (PSII), such systems have not been characterized. Herein, we report a stable ZnII -oxyl species induced by an MFI-type zeolite lattice and its reversible reactivity with O2 at room temperature. Its intriguing characteristics were confirmed by in situ spectroscopic studies in combination with quantum-chemical calculations, namely analyses of the vibronic Franck-Condon progressions and the ESR signal features of both ZnII -oxyl and ZnII -ozonide species formed during this reversible process. Molecular orbital analyses revealed that the reversible reaction between a ZnII -oxyl species and an O2 molecule proceeds via a radical O-O coupling-decoupling mechanism; the unpaired electron of the oxyl species plays a pivotal role in the O-O bond generation process.

Experimental Information on the Adsorbed Phase of Water Formed in the Inner Pore of Single-Walled Carbon Nanotube Itself.

Thus far, nobody has successfully obtained the accurate information on the properties of the adsorbed phases of gases or vapors formed inside a cylindrical micropore of single-walled carbon nanotube (SWCNT) itself based on the experimental procedure. In this work, we succeeded in analyzing experimentally the properties of adsorbed nitrogen and water confined in the inner pore of SWCNT itself by opening the pore composed of close-ended SWCNT without any changes in the surface state and also by applying the unique method for characterization; both the amounts, as well as properties, of surface functional groups and the bundle structure are the same even after the treatments for introducing an open-ended structure to a close-ended one. As a result, the average pore sizes, as well as characteristic adsorption behavior, on the two types of sample were available from the analysis of respective difference adsorption isotherms of nitrogen measured at 77 K between the adsorbed amounts on the open-ended SWCNT and that on the close-ended one. The evaluated pore sizes well coincide with the results estimated by Raman data. These results strongly support that we could analyze the adsorbed phases formed only in the inner pore of SWCNTs by applying the present method. Furthermore, we could analyze the adsorbed phase of water formed inside the cylindrical micropore of SWCNTs, showing the difference in the densities of adsorbed water depending on the pore sizes from the value of bulk water; the densities of the adsorbed water were evaluated to be 0.62 and 0.71 g mL(-1) for SWCNTs having average pore sizes of 1.3 and 1.7 nm, respectively, which were in harmony with those obtained by the theoretical calculations reported by other researchers. The proposed analysis method makes it possible to recognize the focused states of the adsorbed water formed inside the cylindrical micropore of SWCNT more precisely and correctly. The method proposed will shed light on the discussion related to the detailed nature of various adsorbed gases into SWCNT, to the detailed role of adsorbed species formed inside pore in various phenomena, and to the designing the useful materials based on the gained knowledge.

Excellent capture of N2O functioning at RT and lower pressure by utilizing an NaCaA-85 zeolite.

We have found an efficient adsorption feature provided by an NaCaA-85 zeolite for N2O even at 298 K and at lower pressures: N2O adsorption capacities of 1.33 mmol g-1 and 4.69 mmol g-1 under respective pressures of 0.3 and at 100 Torr, respectively, indicating the best performance among adsorbent materials so far reported. These adsorption peculiarities will pave a new way for developing excellent materials working for adsorption/separation processes of N2O.

Success in making Zn+ from atomic Zn(0) encapsulated in an MFI-type zeolite with UV light irradiation.

For the first time, the paramagnetic Zn(+) species was prepared successfully by the excitation with ultraviolet light in the region ascribed to the absorption band resulting from the 4s-4p transition of an atomic Zn(0) species encapsulated in an MFI-type zeolite. The formed species gives a specific electron spin resonance band at g = 1.998 and also peculiar absorption bands around 38,000 and 32,500 cm(-1) which originate from 4s-4p transitions due to the Zn(+) species with paramagnetic nature that is formed in MFI. The transformation process (Zn(0) → Zn(+)) was explained by considering the mechanism via the excited triplet state ((3)P) caused by the intersystem crossing from the excited singlet state ((1)P) produced through the excitation of the 4s-4p transition of an atomic Zn(0) species grafted in MFI by UV light. The transformation process was well reproduced with the aid of a density functional theory calculation. The thus-formed Zn(+) species which has the doublet spin state exhibits characteristic reaction nature at room temperature for an O2 molecule having a triplet spin state in the ground state, forming an η(1) type of Zn(2+)-O2(-) species. These features clearly indicate the peculiar reactivity of Zn(+) in MFI, whereas Zn(0)-(H(+))2MFI hardly reacts with O2 at room temperature. The bonding nature of [Zn(2+)-O2(-)] species was also evidenced by ESR measurements and was also discussed on the basis of the results obtained through DFT calculations.

Further evidence for the existence of a dual-Cu+ site in MFI working as the efficient site for C2H6 adsorption at room temperature.

We have recently clarified the following point: a dual-type site, which is composed of a pair of monovalent copper ions (Cu(+)) formed in a copper-ion-exchanged MFI-type zeolite (CuMFI), functions as the active center for strong ethane (C2H6) adsorption even at room temperature rather than a single-type site composed of a Cu(+) ion. However, the character of the dual-Cu(+) site in a CuMFI is not yet fully understood. In this study, we have elucidated the nature of the active sites for C2H6 based on infrared (IR) and calorimetric data. On the basis of the results obtained, we came to the conclusion that the dual-Cu(+) site composed of Cu(+) ions giving the adsorption energy of 100 kJ mol(-1) and the absorption band at 2151 cm(-1) for carbon monoxide (used as a probe molecule) at room temperature functions as an adsorption site for C2H6. We also evaluated, for the first time, the interaction between the dual-Cu(+) site and C2H6 energetically, by the direct measurement of heat of adsorption. The value of 67 kJ mol(-1) that we recorded was higher than that for the single-Cu(+) site in this sample and also for other samples, such as NaMFI and HMFI.

Structure of hydrated cobalt ions confined in the nanospace of single-walled carbon nanotubes.

The structure of hydrated Co ions confined in the nanospace of single-walled carbon nanotubes (SWNTs) has been studied using the X-ray absorption fine structure (XAFS) technique. Water adsorption isotherms on Co-impregnated SWNTs indicate a high affinity of Co ions to water molecules. The results of XAFS analysis provided the information on the proportion of dissolved species in nanospaces against the total amount of cobalt ions adsorbed on the open-pored SWNT. The structural information of the first shell around a Co ion was expressed in terms of the hydration number, Co-O distance and Debye-Waller factor. The actual coordination number and the interatomic distance of Co-O for the dissolved species were remarkably reduced compared to the bulk aqueous solution indicating the dehydration of water molecules from Co ions and a compact hydrated structure in the micropore of SWNTs.

Fabrication and photocatalytic properties of self-assembled in(OH)3 and In2O3 nano/micro-cubes.

This article reports a novel fabrication method for In(OH)3 from indium oxalate by hydrothermal process. Hydrothermal decomposition of indium oxalate at 180 degrees C for 10 h results in In(OH)3. The influence of hydrothermal experimental conditions such as temperature, time on the formation of indium hydroxide was investigated. The self-assembly process was strongly influenced the experimental conditions. The thermal decomposition of In(OH)3 at 400 degrees C results In2O3. The synthesized In(OH)3 and In2O3 were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), thermal analysis (TGA and DTA), diffuse reflectance spectra (DRS), and nitrogen adsorption analysis. The XRD patterns indicated the formation of well crystallized cubic phase In(OH)3 and In2O3. The FE-SEM results indicated formation of In(OH)3 and porous In2O3 nano/micro-cubes. The photocatalytic activity of the synthesized In(OH)3 was studied under UV light irradiation and results showed that the In(OH)3 photocatalyst was efficient for dye degradation. We proposed a plausible mechanism for the formation of In(OH)3, and In2O3 self-assembly.

Acidic layer-enhanced nanoconfinement of anions in cylindrical pore of single-walled carbon nanotube.

The adsorption of the nitrate ion by the cylindrical pore of single-walled carbon nanotubes (SWCNT) was found to be aided by an acidic adsorbed layer. Adsorbed water in the vicinity of the pore wall can supply protons through ionization, forming the acidic layer, according to Raman spectra and results of solution pH fluctuations caused by ion species adsorption. Such an acidic adsorbed layer leads to surplus adsorption of anionic species where the adsorbed amount of nitrate ions is much larger than that of cations. Also, we could observe the Raman bands being assignable to the symmetrical stretching mode at an extremely high-frequency region for nano-restricted nitrate ions compared to any other bulk phases. The abnormal band shift of adsorbed nitrate ions indicates that the nitrate ions are confined in the pore under the effects of nanoconfinement by the pore and the strong interaction with the acidic layer in the pore. Our results warn that we have to construct the adsorption model of aqueous electrolytes confined in carbon pores by deliberating the acid layer formed by the adsorbed water.

Unprecedented reversible redox process in the ZnMFI-H2 system involving formation of stable atomic Zn(0).

In its element: Zn(2+) at the M7 site of MFI-type zeolites activates H(2), via ZnH and OH species, and leads to Zn(0) species. The Zn(0) species returns to its original state, a Zn(2+) ion, upon evacuation of the zeolite at 873 K (see picture). The formation of the Zn(0) species is supported by DFT calculations.

Behavior of Ag3 clusters inside a nanometer-sized space of ZSM-5 zeolite.

We found from DFT calculations that Ag-Ag orbital interactions as well as Ag-O electrostatic interactions determine the structures of three silver cations inside a nanometer-sized cavity of ZSM-5 (Ag(3)-ZSM-5) in lower and higher spin states. Both interactions strongly depend on the number of Al atoms substituted for Si atoms on the ZSM-5 framework (ZSM-5(Al(n))), where n ranges from 1 to 3. In smaller n, stronger Ag-Ag orbital interactions and weaker Ag-O electrostatic interactions operate. Accordingly, there are significant dependencies of the structures of three silver cations on the number of Al atoms. In lower spin states of Ag(3)-ZSM-5(Al(1)) and Ag(3)-ZSM-5(Al(2)), D(3h)-like triangle clusters are contained inside ZSM-5 whereas their higher spin states have triangle clusters distorted significantly from the D(3h) structure. In lower spin states, the totally symmetric orbital consisting of 5s(Ag) orbitals is responsible for cluster formation, whereas in higher spin states occupation of a 5s(Ag)-based orbital with one node results in significant distortion of the triangle clusters. The distortion can be partially understood by analogies to Jahn-Teller distortion of the bare D(3h) Ag(3)(+) cluster in the triplet spin state. When n is 3, we found that three silver cations are isolated in a lower spin state and that a linear cluster consisting of two silver cations is formed in a higher spin state. Thus, we demonstrate from DFT calculations that the number of Al atoms can control the properties of three silver cations inside a ZSM-5 cavity. Since the structural and electronic features of the enclosed silver clusters can link to their catalytic properties, the DFT findings can help us to understand the catalytic activity of Ag-ZSM-5.

Visible-light-derived photocatalyst based on TiO(2-δ)Nδ with a tubular structure.

We succeeded in achieving visible-light responsiveness on a tubular TiO(2) sample through the treatment of a tubular TiO(2) that has a large surface area with an aqueous solution of ammonia or triethylamine at room temperature and subsequent calcination at 623 K, which produced a nitrided tubular TiO(2) sample. It was found that the ease of nitridation is dependent on the surface states; washing the tubular TiO(2) sample with an aqueous acidic solution is very effective and indispensable. This treatment causes the appearance of acidic sites on the tubular TiO(2), which was proved by the following experiments: NH(3) temperature-programmed desorption and two types of organic reactions exploiting the acid properties. The prepared samples, TiO(2-δ)N(δ), efficiently absorb light in the visible region, and they exhibit a prominent feature for the decomposition of methylene blue in an aqueous solution at 300 K under irradiation with visible light, indicating the achievement of visible-light responsiveness on the tubular TiO(2) sample. This type of tubular TiO(2-δ)N(δ) sample has merit in the sense that it has a large surface area and a characteristic high transparency for enabling photocatalytic reactions because it has a tubular structure and is composed of thin walls.

Existence of dual species composed of Cu(+) in CuMFI being bridged by C(2)H(2).

The interaction of ethyne (C(2)H(2)), as well as of carbon dioxide (CO(2)), with copper-ion-exchanged MFI zeolite (CuMFI) at room temperature was examined. It was found that CuMFI preferentially adsorbs C(2)H(2), while this material does not respond to CO(2). To clarify the specificity of CuMFI, a combination of various experimental techniques and theoretical calculations was adopted. Distinctive interaction energies of 140 and 110 kJ mol(-1) were clearly observed at the initial stage of C(2)H(2) adsorption on CuMFI, suggesting the presence of two types of adsorbed C(2)H(2). Two distinct IR bands at 1620 and 1814 cm(-1) appeared, which were assigned to the C[triple bond]C stretching vibration modes of C(2)H(2) differing in their adsorbed state. Both photoluminescence and X-ray absorption spectra showed that cuprous ions (Cu(+)) in CuMFI act as efficient sites for a marked C(2)H(2) adsorption. From the analysis of the latter spectra and the calculational results based on the density functional theory, the formation of dual Cu(+)...(C(2)H(2))...Cu(+) complexes was indicated for the first time for CuMFI, and such a special configuration of the Cu(+) sites contributed to the extremely strong adsorption of C(2)H(2). In contrast, it was necessary for the linear CO(2) molecule to take a bent structure to be adsorbed on Cu(+) in CuMFI. It was concluded that the difference in the adsorption response of Cu(+) in CuMFI towards C(2)H(2) and CO(2) is due to the chemistry between the nature of electron donation of Cu(+) and the hybrid orbitals of the respective molecules. This work promotes further understanding of the states of active centres in CuMFI for C(2)H(2) activation, as well as for N(2) fixation.

Site-specific Xe additions into Cu-ZSM-5 zeolite.

Large-scale density functional theory (DFT) calculations found significant preferences of two-coordinated copper cations as Xe binding site in ZSM-5. Such site-preferences cannot be seen in usual adsorbents such as the CO or NO molecule inside Cu-ZSM-5 as well as the Xe atom inside alkali-metal exchanged ZSM-5s. A key factor in the specificity of the inner Xe atom is that interactions of the Xe atom with the extraframework copper cation are substantial relative to the extraframework alkali-metal cases, but weak relative to the CO and NO cases. Since the Xe atom can distinguish two-coordinated copper cations from others, it can be utilized to track sensitively the location of active sites of Cu-ZSM-5.

Adsorption enhancement of nitrogen gas by atomically heterogeneous nanospace of boron nitride.

In this study, porous boron nitride (p-BN) with hexagonal phase boron nitride (h-BN) pore walls was synthesized using high-temperature calcination. Negligible variation in pore-wall structure can be observed in powder X-ray diffraction (XRD) profiles and infrared (IR) spectra. However, a highly stable p-BN with a stable pore structure even at 973 K under the oxidative conditions is obtained when synthesized at higher than 1573 K under nitrogen gas flow. For p-BN, this stability is obtained by generating h-BN microcrystals. Nitrogen adsorption-desorption isotherms at 77 K provide type-IV features and typical adsorption-desorption hysteresis, which suggests micropore and mesopore formation. Moreover, adsorption-desorption isotherms of Ar at 87 K are measured and compared with those of nitrogen. The relative adsorbed amount of nitrogen (i.e., the amount of nitrogen normalized by that of Ar at each relative pressure or adsorption potential value) on p-BN is considerably larger than that on microporous carbon at low-pressure regions, which suggests the existence of strong adsorption sites on the p-BN surface. In fact, the relative number of adsorbed nitrogen molecules to that of Ar on p-BN is, at most, 150%-200% larger than that on microporous carbon for the same adsorption potential state. Furthermore, additional adsorption enhancement to nitrogen between P/P 0 = 10-5 and 10-3 can be observed for p-BN treated at 1673 K, which suggests the uniformly adsorbed layer formation of nitrogen molecules in the vicinity of a basal planar surface. Thus, unlike typical nanoporous sp2 carbons, p-BN materials have the potential to enhance adsorption for certain gas species because of their unique surface state.

Effects of ZSM-5 zeolite confinement on reaction intermediates during dioxygen activation by enclosed dicopper cations.

We investigate how nanospaces surrounded by a 10-membered ring of ZSM-5 zeolite affect the reaction intermediates formed during dioxygen activation by enclosed dicopper cations. Two types of dioxygen intermediates are considered: one is an O(2)...Cu(2) complex, where dioxygen binds to the two Cu cations, and the other is a bis(mu-oxo)dicopper complex converted from an O(2)...Cu(2) complex by the cleavage of the O-O bond. We employ large-scale density functional theory (DFT) calculations with the B3LYP functional to examine the energetics of the two dioxygen intermediates inside a 10-membered ring of ZSM-5 with double Si --> Al substitutions at variable locations. The properties of the O(2)...Cu(2) complexes, such as the dioxygen bridging modes and dioxygen activation, are strongly affected by the locations of the two Al atoms within the 10-membered ring. In particular, the O(2)...Cu(2) complexes have either end-on or side-on bridging modes depending on the substituted Al positions. On the other hand, the steric hindrances of a ZSM-5 cavity play crucial roles in determining the properties of the bis(mu-oxo)dicopper complexes containing a diamond Cu(2)O(2) core. By restricting its Cu(2)O(2) core to a 10-membered ring of ZSM-5 in which the two Al atoms are second-nearest neighbors, each Cu cation is tetrahedral four-coordinate. On the other hand, the Cu cations have almost square planar coordination inside a ZSM-5 where the Al atoms are fourth-nearest neighbors. The different Cu coordination environments are responsible for the different levels of stability; the planar diamond Cu(2)O(2) core is 30.7 kcal/mol more stable relative to the tetrahedral case. Since the ZSM-5 nanospaces directly influence the stability of the bis(mu-oxo)dicopper complexes by changing the Cu coordination environments, zeolite confinement effects on the bis(mu-oxo)dicopper complexes are more noticeable than those in the O(2)...Cu(2) cases. The DFT findings are important in terms of catalytic functions, because the spatial constraint from the ZSM-5 should significantly contribute to the stability of the reaction intermediates formed during the dioxygen activation.

Room temperature O transfer from N2O to CO mediated by the nearest Cd(i) ions in MFI zeolite cavities.

The dominant oxidation state of cadmium is +ii. Although extensive investigations into the +ii oxidation state have been carried out, the chemistry of CdI is still largely underdeveloped. Here, we report a new functionality of cadmium created by the zeolite lattice: room temperature O transfer from N2O to CO mediated by the nearest monovalent cadmium ions in MFI zeolite. Thermal activation of CdII ion-exchanged MFI zeolite in vacuo affords the diamagnetic [CdI-CdI]2+ species with a short CdI-CdI σ bond (2.67 Å). This species generates two CdI˙ sites under UV irradiation through homolytic cleavage of the CdI-CdI σ bond, and the thus-formed nearest CdI˙ sites abstract an O atom from N2O to generate the [CdII-Ob-CdII]2+ core, where Ob means bridged oxygen. This bridging atomic oxygen species is transferred to CO at room temperature, through which CO oxidation and regeneration of the CdI-CdI σ bond then proceed. This is the first example pertaining to the reversible redox reactivity of the nearest monovalent cadmium ions toward stable small molecules. In situ spectroscopic characterization captured all the intermediates in the reaction processes, and these data allowed us to calibrate the density-functional-theory cluster calculations, by means of which we were able to show that the charge compensation requirement at the nearest two Al sites arrayed circumferentially in the 10-membered ring of MFI zeolite creates such novel functionalities of cadmium. The unprecedented reactivity of CdI and its origin are discussed.

Surplus adsorption of bromide ion into π-conjugated carbon nanospaces assisted by proton coadsorption.

Nanoporous carbons can preferentially adsorb bromide ions from an aqueous solution of alkali metal bromides, even on π-conjugated surfaces. Our results show a new adsorption mechanism whereby coadsorption of protons enhances the adsorption of the anions onto the carbons.

Tubular nitrogen-doped TiO2 samples with efficient photocatalytic properties based on long-lived charge separation under visible-light irradiation: synthesis, characterization and reactivity.

A nitrogen-doped TiO2 sample was prepared at 413 K by direct hydrothermal treatment of titanium isopropoxide in an aqueous solution of NH3. This new material has a large specific surface area of ca. 220 m2 g-1 because of its tubular structure and it exhibits a prominent absorption feature in the region between 400 and 650 nm. It responds strongly to light in the visible region, which is key to its potential performance as a photocatalyst that may improve the efficiency for utilization of solar energy. Actually, this sample exhibits very efficient activity in the decomposition of CH3COOH under visible light among the samples prepared. This effective photocatalysis of the present sample was substantiated by characteristic spectroscopic features, such as: (1) an optical absorption band with λ > 400 nm because of the doped nitrogen species; (2) the formation of EPR-active, long-lived N˙ and O2- species, as well as N2- species, under visible-light irradiation in the O2 or N2 adsorption process at 300 K by way of the monovalent nitrogen ions in the bulk (both substitutional and interstitial); (3) the existence of IR-active O2 species adsorbed on the nitrogen-doped TiO2 sample even without light irradiation; and (4) an XPS N1s band around 399.6 eV that is assignable to the N- species. The amounts of N˙ and O2- species formed in the nitrogen-doped TiO2 sample under visible-light irradiation correlated well with the levels of reactivity observed in the decomposition of CH3COOH on the samples with varying amounts and types of doped nitrogen species. We conclude that the photoactive N˙ and O2- species created in the present sample are responsible for the decomposition of organic materials assisted by visible light irradiation. These features may be attributable to the interface between the sample's tubular structure and anatase with poor crystallinity, which probably causes the resistance to the recombination of electron-hole pairs formed by irradiation.