RESUMO
Pd-based catalysts are widely used in the oxidation of CH4 and have a significant impact on global warming. However, understanding their active sites remains controversial, because interconversion between Pd and PdO occurs consecutively during the reaction. Understanding the intrinsic active sites under reaction conditions is critical for developing highly active and selective catalysts. In this study, we demonstrated that partially oxidized palladium (PdOx) on the surface plays an important role for CH4 oxidation. Regardless of whether the initial state of Pd corresponds to oxides or metallic clusters, the topmost surface is PdOx, which is formed during CH4 oxidation. A quantitative analysis using CO titration, diffuse reflectance infrared Fourier-transform spectroscopy, X-ray diffraction, and scanning transmission electron microscopy demonstrated that a surface PdO layer was formed on top of the metallic Pd clusters during the CH4 oxidation reaction. Furthermore, the time-on-stream test of CH4 oxidation revealed that the presence of the PdO layer on top of the metallic Pd clusters improves the catalytic activity. Our periodic density functional theory (DFT) calculations with a PdOx slab and nanoparticle models aided the elucidation of the structure of the experimental PdO particles, as well as the experimental C-O bands. The DFT results also revealed the formation of a PdO layer on the metallic Pd clusters. This study helps achieve a fundamental understanding of the active sites of Pd and PdO for CH4 oxidation and provides insights into the development of active and durable Pd-based catalysts through molecular-level design.
Assuntos
Óxidos , Paládio , Domínio Catalítico , Oxirredução , Paládio/químicaRESUMO
Steamed zeolites exhibit improved catalytic properties for hydrocarbon activation (alkane cracking and dehydrogenation). The nature of this practically important phenomenon has remained a mystery for the last six decades and was suggested to be related to the increased strength of zeolitic Bronsted acid sites after dealumination. We now utilize state-of-the-art infrared spectroscopy measurements and prove that during steaming, aluminum oxide clusters evolve (due to hydrolysis of Al out of framework positions with the following clustering) in the zeolitic micropores with properties very similar to (nano) facets of hydroxylated transition alumina surfaces. The Bronsted acidity of the zeolite does not increase and the total number of Bronsted acid sites decreases during steaming. O5Al(VI)-OH surface sites of alumina clusters dehydroxylate at elevated temperatures to form penta-coordinate Al1O5 sites that are capable of initiating alkane cracking by breaking the first C-H bond very effectively with much lower barriers (at lower temperatures) than for protolytic C-H bond activation, with the following reaction steps catalyzed by nearby zeolitic Bronsted acid sites. This explains the underlying mechanism behind the improved alkane cracking and alkane dehydrogenation activity of steamed zeolites: heterolytic C-H bond breaking occurs on Al-O sites of aluminum oxide clusters confined in zeolitic pores. Our findings explain the origin of enhanced activity of steamed zeolites at the molecular level and provide the missing understanding of the nature of extra-framework Al species formed in steamed/dealuminated zeolites.
RESUMO
γ-alumina is one of the oldest and most important commercial catalytic materials with high surface area and stability. These attributes enabled its use as the first commercial large-scale heterogeneous catalyst for ethanol dehydration. Despite progress in materials characterization the nature of the specific sites on the surface of γ-alumina that are responsible for its unique catalytic properties has remained obscure and controversial. By using combined infrared spectroscopy, electron microscopy and solid-state nuclear magnetic resonance measurements we identify the octahedral, amphoteric (O)5 Al(VI)-OH sites on the (100) segments of massively restructured (110) facets on typical rhombus-platelet γ-alumina as well as the (100) segments of irrational surfaces (invariably always present in all γ-alumina samples) responsible for its unique catalytic activity. Such (O)5 Al(VI)-OH sites are also present on the macroscopically defined (100) facets of γ-alumina with elongated/rod-like geometry. The mechanism by which these sites lose -OH groups upon thermal dehydroxylation resulting in coordinatively unsaturated penta-coordinate Al+3 O5 sites is clarified. These coordinatively unsaturated penta-coordinate Al sites produce well-defined thermally stable Al-carbonyl complexes. Our findings contribute to the understanding of the nature of coordinatively unsaturated Al sites on the surface of γ-alumina and their role as catalytically active sites.
RESUMO
The analogy between single-atom catalysts (SACs) and molecular catalysts predicts that the specific catalytic activity of these systems is constant. We provide evidence that this prediction is not necessarily true. As a case in point, we show that the specific activity over ceria-supported single Pd atoms linearly increases with metal atom density, originating from the cumulative enhancement of CeO2 reducibility. The long-range electrostatic footprints (≈1.5â nm) around each Pd site overlap with each other as surface Pd density increases, resulting in an observed deviation from constant specific activity. These cooperative effects exhaust previously active O atoms above a certain Pd density, leading to their permanent removal and a consequent drop in reaction rate. The findings of our combined experimental and computational study show that the specific catalytic activity of reducible oxide-supported single-atom catalysts can be tuned by varying the surface density of single metal atoms.
RESUMO
The IR spectra of adsorbed CO and NO probe molecules were used to characterize the coordination chemistry of Fe(2+) ions in solution ion exchanged Fe,H/SSZ-13 zeolites. The effects of Fe ion exchange levels, as well as the sample pre-treatment conditions, on the adsorption of these probe molecules were investigated. The ion exchange levels (in the range of the study) did not affect significantly the IR spectra of either probe molecule, and the IR features and their intensity ratios were very similar. Experiments with both probe molecules substantiated the presence of two distinct types of Fe(2+) ions in cationic positions. We assign these two Fe(2+) ions to two distinct cationic positions: Fe(2+) in 6R and 8R positions. NO initially adsorbs preferentially onto Fe(2+) sites in the 6R position, and then populates sites in the 8R. Fe(2+) ions in the 8R positions require the interaction of more than one NO molecule to move them out from their adsorbate-free cationic positions. As soon as they move from their stable positions, they are able to bind to multiple NO molecules, and form mostly tri-nitrosyls. These tri-nitrosyls, however, are only stable in the presence of gas phase NO; under dynamic vacuum they lose one of the NO molecules from their coordination sphere and form stable di-nitrosyls. The adsorption of CO is much weaker on Fe(2+) sites than that of NO, and requires cryogenic sample temperatures to initiate CO adsorption. Under the conditions applied in this study, only mono-carbonyl formation was observed. Reduction in H2 at 773 K increased the number of Fe(2+) adsorption sites, primarily in the 8R locations. Oxidation by N2O, on the other hand, selectively reduced the adsorption of both CO and NO on the Fe(2+) sites in 8R positions. Adsorbed oxygen left behind from the decomposition of N2O at 573 K readily reacted with CO to produce CO2 even at 150 K.
RESUMO
The adsorption of CO2 and CO was investigated on a pure γ-Al2O3 support material that has been used in Pd and Ru catalysts for the reduction of CO2. The adsorption of CO2 resulted in the formation of carbonates, bicarbonates and linearly adsorbed CO2 species. The amount and the nature of the adsorbed species were dependent on the annealing temperature of the alumina support. On γ-Al2O3 annealed at 473 K mostly bicarbonates formed, while no adsorbed CO2 was seen on this highly hydroxylated surface. With increasing calcination temperature the amount of both surface carbonates and linearly adsorbed CO2 increased, but still the most abundant surface species were bicarbonates. Surface carbonates and adsorbed CO2 can readily be removed from the alumina surface, while bicarbonates are stable to elevated temperatures. The interaction of CO with γ-Al2O3 is much weaker than that of CO2. At room temperature CO adsorbs only on Lewis acid sites, and can be readily removed by evacuation. At 100 K CO can probe different defect sites on the alumina surface. Under no conditions we have observed the formation of any carbonates or bicarbonates upon the interaction of CO with the pure alumina support. In co-adsorption experiments CO competes for adsorption sites with the linearly adsorbed CO2 on the 773 K-annealed γ-Al2O3 surface, but it does not result in the desorption of CO2, rather in the increased production of weakly held carbonates. After the removal of adsorbed CO, CO2 moves back to its original adsorption sites, i.e., Lewis acidic Al(3+) centers. The exposure of a CO2-saturated γ-Al2O3 to H2O did not affect any of the adsorbed surface species. The findings of this study will be used to rationalize the results of our ongoing in situ and in operando studies on the reduction of CO2 on supported Pd and Ru catalysts.
RESUMO
Alumina supported Pd catalysts with metal loadings of 0.5, 2.5 and 10 wt% were investigated by in situ FTIR spectroscopy in order to understand the nature of adsorbed species formed during their exposure to CO2 and CO. Exposing the annealed samples to CO2 at 295 K resulted in the formation of alumina support-bound surface species only: linear adsorbed CO2, bidentate carbonates and bicarbonates. Room temperature exposure of all three samples to CO produced IR features characteristic of both ionic and metallic Pd, as well as bands we observed upon CO2 adsorption (alumina support-bound species). Low temperature (100 K) adsorption of CO on the three samples provided information about the state of Pd after oxidation and reduction. Oxidized samples contained exclusively ionic Pd, while mostly metallic Pd was present in the reduced samples. Subsequent annealing of the CO-saturated samples revealed the facile (low temperature) reduction of PdO(x) species by adsorbed CO. This process was evidenced by the variations in IR bands characteristic of ionic and metallic Pd-bound CO, as well as by the appearance of IR bands associated with CO2 adsorption as a function of annealing temperature. Samples containing oxidized Pd species (oxidized, annealed or reduced) always produced CO2 upon their exposure to CO, while no CO2-related surface entities were observed on samples having only fully reduced (metallic) Pd.
RESUMO
The adsorption of CO and NO over Cu-SSZ-13 zeolite catalysts, highly active in the selective catalytic reduction of NO(x) with NH(3), was investigated by FTIR spectroscopy, and the results obtained were compared to those collected from other Cu-ion exchanged zeolites (Y,FAU and ZSM-5). Under low CO pressures and at room temperature (295 K), CO forms monocarbonyls exclusively on the Cu(+) ions, while in the presence of gas phase CO dicarbonyls on Cu(+) and adsorbed CO on Cu(2+) centers form, as well. At low (cryogenic) sample temperatures, tricarbonyl formation on Cu(+) sites was also observed. The adsorption of NO produces IR bands that can be assigned to nitrosyls bound to both Cu(+) and Cu(2+) centers, and NO(+) species located in charge compensating cationic positions of the chabasite framework. On the reduced Cu-SSZ-13 samples the formation of N(2)O was also detected. The assignment of the adsorbed NO(x) species was aided by adsorption experiments with isotopically labeled (15)NO. The movement of Cu ions from the sterically hindered six member ring position to the more accessible cavity positions as a result of their interaction with adsorbates (NO and H(2)O) was clearly evidenced. Comparisons of the spectroscopy data obtained in the static transmission IR system to those collected in the flow-through diffuse reflectance cell points out that care must be taken when general conclusions are drawn about the adsorptive and reactive properties of metal cation centers based on a set of data collected under well defined, specific experimental conditions.
RESUMO
Side on! Combined FTIR and NMR studies revealed the presence of a side-on nitrosyl species in the zeolite Cu-SSZ-13. This intermediate is very similar to those found in nitrite reductase enzyme systems. The identification of this intermediate led to the proposal of a reaction mechanism that is fully consistent with the results of both kinetic and spectroscopic studies.
Assuntos
Cobre/química , Nitrito Redutases/química , Zeolitas/química , Catálise , Cinética , Espectroscopia de Ressonância MagnéticaRESUMO
Metal-organic frameworks have developed into a formidable heterogeneous catalysis platform in recent years. It is well established that thermolysis of coordinated solvents from MOF nodes can render highly reactive, coordinatively unsaturated metal complexes which are stabilized via site isolation and serve as active sites in catalysis. Such approaches are limited to frameworks featuring solvated transition-metal complexes and must be stable toward the formation of "permanent" open metal sites. Herein, we exploit the hemilability of metal-carboxylate bonds to generate transient open metal sites in an In(III) MOF, pertinent to In-centered catalysis. The transient open metal sites catalyze the Strecker reaction over multiple cycles without loss of activity or crystallinity. We employ computational and spectroscopic methods to confirm the formation of open metal sites via transient dissociation of In(III)-carboxylate bonds. Furthermore, the amount of transient open metal sites within the material and thus the catalytic performance can be temperature-modulated.
RESUMO
A large-sample-volume constant-flow magic angle sample spinning (CF-MAS) NMR probe is reported for in situ studies of the reaction dynamics, stable intermediates/transition states, and mechanisms of catalytic reactions. In our approach, the reactants are introduced into the catalyst bed using a fixed tube at one end of the MAS rotor while a second fixed tube, linked to a vacuum pump, is attached at the other end of the rotor. The pressure difference between both ends of the catalyst bed inside the sample cell space forces the reactants flowing through the catalyst bed, which improves the diffusion of the reactants and products. This design allows the use of a large sample volume for enhanced sensitivity and thus permitting in situ(13)C CF-MAS studies at natural abundance. As an example of application, we show that reactants, products and reaction transition states associated with the 2-butanol dehydration reaction over a mesoporous silicalite supported heteropoly acid catalyst (HPA/meso-silicalite-1) can all be detected in a single (13)C CF-MAS NMR spectrum at natural abundance. Coke products can also be detected at natural (13)C abundance and under the stopped flow condition. Furthermore, (1)H CF-MAS NMR is used to identify the surface functional groups of HPA/meso-silicalite-1 under the condition of in situ drying. We also show that the reaction dynamics of 2-butanol dehydration using HPA/meso-silicalite-1 as a catalyst can be explored using (1)H CF-MAS NMR.
RESUMO
Sustainable energy-conversion and chemical-production require catalysts with high activity, durability, and product-selectivity. Metal/oxide hybrid structure has been intensively investigated to achieve promising catalytic performance, especially in neutral or alkaline electrocatalysis where water dissociation is promoted near the oxide surface for (de)protonation of intermediates. Although catalytic promise of the hybrid structure is demonstrated, it is still challenging to precisely modulate metal/oxide interfacial interactions on the nanoscale. Herein, we report an effective strategy to construct rich metal/oxide nano-interfaces on conductive carbon supports in a surfactant-free and self-terminated way. When compared to the physically mixed Pd/CeO2 system, a much higher degree of interface formation was identified with largely improved hydrogen oxidation reaction (HOR) kinetics. The benefits of the rich metal-CeO2 interface were further generalized to Pd alloys for optimized adsorption energy, where the Pd3Ni/CeO2/C catalyst shows superior performance with HOR selectivity against CO poisoning and shows long-term stability. We believe this work highlights the importance of controlling the interfacial junctions of the electrocatalyst in simultaneously achieving enhanced activity, selectivity, and stability.
RESUMO
Cu/zeolites efficiently catalyze selective reduction of environmentally harmful nitric oxide with ammonia. Despite over a decade of research, the exact NO reduction steps remain unknown. Herein, using a combined spectroscopic, catalytic and DFT approach, we show that nitrosyl ions (NO+) in zeolitic micropores are the key intermediates for NO reduction. Remarkably, they react with ammonia even below room temperature producing molecular nitrogen (the reaction central to turning the NO pollutant to benign nitrogen) through the intermediacy of the diazo N2H+ cation. Experiments with isotopically labeled N-compounds confirm our proposed reaction path. No copper is required for N2 formation to occur during this step. However, at temperatures below 100 °C, when NO+ reacts with NH3, the bare Brønsted acid site becomes occupied by NH3 to form strongly bound NH4 +, and consequently, this stops the catalytic cycle, because NO+ cannot form on NH4-zeolites when their H+ sites are already occupied by NH4 +. On the other hand, we show that the reaction becomes catalytic on H-zeolites at temperatures when some ammonia desorption can occur (>120 °C). We suggest that the role of Cu(ii) ions in Cu/zeolite catalysts for low-temperature NO reduction is to produce abundant NO+ by the reaction: Cu(ii) + NO â Cu(i)â¯NO+. NO+ then reacts with ammonia to produce nitrogen and water. Furthermore, when Cu(i) gets re-oxidized, the catalytic cycle can then continue. Our findings provide novel understanding of the hitherto unknown steps of the SCR mechanism pertinent to N-N coupling. The observed chemistry of Cu ions in zeolites bears striking resemblance to the copper-containing denitrification and annamox enzymes, which catalyze transformation of NO x species to N2, via di-azo compounds.
RESUMO
Herein, a detailed analysis was carried out using high-field (19.9 T) 27Al magic-angle spinning (MAS) nuclear magnetic resonance (NMR) on three specially prepared aluminum oxide samples where the γ-, δ-, and θ-Al2O3 phases are dominantly expressed through careful control of the synthesis conditions. Specifically, two-dimensional (2D) multiquantum (MQ) MAS 27Al was used to obtain high spectral resolution, which provided a guide for analyzing quantitative 1D 27Al NMR spectra. Six aluminum sites were resolved in the 2D MQ MAS NMR spectra, and seven aluminum sites were required to fit the 1D spectra. A set of octahedral and tetrahedral peaks with well-defined quadrupolar line shapes was observed in the θ-phase dominant sample and was unambiguously assigned to the θ-Al2O3 phase. The distinct line shapes related to the θ-Al2O3 phase provided an opportunity for effectively deconvoluting the more complex spectrum obtained from the δ-Al2O3 dominant sample, allowing the peaks/quadrupolar parameters related to the δ-Al2O3 phase to be extracted. The results show that the δ-Al2O3 phase contains three distinct AlO sites and three distinct AlT sites. This detailed Al site structural information offers a powerful way of analyzing the most complex γ-Al2O3 spectrum. It is found that the γ-Al2O3 phase consists of Al sites with local structures similar to those found in the δ-Al2O3 and θ-Al2O3 phases albeit with less ordering. Spin-lattice relaxation time measurement further confirms the disordering of the lattice. Collectively, this study uniquely assigns 27Al features in transition aluminas, offering a simplified method to quantify complex mixtures of aluminum sites in transition alumina samples.
RESUMO
Considering their superior charge-transfer characteristics, easy tenability of energy levels, and low production cost, organic semiconductors are ideal for photoelectrochemical (PEC) hydrogen production. However, organic-semiconductor-based photoelectrodes have not been extensively explored for PEC water-splitting because of their low stability in water. Herein, we report high-performance and stable organic-semiconductors photoanodes consisting of p-type polymers and n-type non-fullerene materials, which is passivated using nickel foils, GaIn eutectic, and layered double hydroxides as model materials. We achieve a photocurrent density of 15.1 mA cm-2 at 1.23 V vs. reversible hydrogen electrode (RHE) with an onset potential of 0.55 V vs. RHE and a record high half-cell solar-to-hydrogen conversion efficiency of 4.33% under AM 1.5 G solar simulated light. After conducting the stability test at 1.3 V vs. RHE for 10 h, 90% of the initial photocurrent density are retained, whereas the photoactive layer without passivation lost its activity within a few minutes.
RESUMO
Atomically dispersed precious metal catalysts have emerged as a frontier in catalysis. However, a robust, generic synthetic strategy toward atomically dispersed catalysts is still lacking, which has limited systematic studies revealing their general catalytic trends distinct from those of conventional nanoparticle (NP)-based catalysts. Herein, we report a general synthetic strategy toward atomically dispersed precious metal catalysts, which consists of "trapping" precious metal precursors on a heteroatom-doped carbonaceous layer coated on a carbon support and "immobilizing" them with a SiO2 layer during thermal activation. Through the "trapping-and-immobilizing" method, five atomically dispersed precious metal catalysts (Os, Ru, Rh, Ir, and Pt) could be obtained and served as model catalysts for unravelling catalytic trends for the oxygen reduction reaction (ORR). Owing to their isolated geometry, the atomically dispersed precious metal catalysts generally showed higher selectivity for H2O2 production than their NP counterparts for the ORR. Among the atomically dispersed catalysts, the H2O2 selectivity was changed by the types of metals, with atomically dispersed Pt catalyst showing the highest selectivity. A combination of experimental results and density functional theory calculations revealed that the selectivity trend of atomically dispersed catalysts could be correlated to the binding energy difference between *OOH and *O species. In terms of 2 e- ORR activity, the atomically dispersed Rh catalyst showed the best activity. Our general approach to atomically dispersed precious metal catalysts may help in understanding their unique catalytic behaviors for the ORR.
RESUMO
Dispersion and quantitative characterization of supported catalysts is a grand challenge in catalytic science. In this paper, heteropoly acid H(3)PW(12)O(40) (HPA) is dispersed on mesoporous zeolite silicalite-1 derived from hydrothermal synthesis using carbon black nanoparticle templates, and the catalytic activity is studied for 1-butene isomerization. The HPAs supported on conventional zeolite and on mesoporous zeolite exhibit very different activities and thus provide good model systems to investigate the structure dependence of the catalytic properties. The HPA on mesoporous silicalite-1 shows enhanced catalytic activity for 1-butene isomerization, while HPA on conventional silicalite-1 exhibits low activity. To elucidate the structural difference, supported HPA catalysts are characterized using a variety of techniques, including (31)P magic angle spinning nuclear magnetic resonance, and are shown to contain a range of species on both mesoporous and conventional zeolites. However, contrary to studies reported in the literature, conventional NMR techniques and chemical shifts alone do not provide sufficient information to distinguish the dispersed and aggregated surface species. The dispersed phase and the nondispersed phase can only be unambiguously and quantitatively characterized using spin-lattice relaxation NMR techniques. The HPA supported on mesoporous zeolite contains a fast relaxation component related to the dispersed catalyst, giving a much higher activity, while the HPA supported on conventional zeolite has essentially only the slow relaxation component with very low activity. The results obtained from this work demonstrate that the combination of spinning sideband fitting and spin-lattice relaxation techniques can provide detailed structural information on not only the Keggin structure for HPA but also the degree of dispersion on the support.
RESUMO
The use of an ultrahigh magnetic field spectrometer and 95Mo isotope enrichment facilitate the direct observation of the local structure of Mo species on Mo/zeolite catalysts by 95Mo NMR. Top trace: The experimental 95Mo NMR spectrum of 6Mo/HZSM-5. Bottom traces: The simulated overall spectrum (orange), the spectral component corresponding to MoO3 (purple), and the component corresponding to the exchanged Mo species (green). The exchanged Mo species proved to be the active center for the methane dehydroaromatization (MDA) reaction.
Assuntos
Hidrocarbonetos Aromáticos/síntese química , Espectroscopia de Ressonância Magnética/métodos , Metano/química , Molibdênio/química , Zeolitas/química , Catálise , Hidrocarbonetos Aromáticos/química , Isótopos , Compostos Organometálicos/síntese química , Compostos Organometálicos/química , Sensibilidade e EspecificidadeRESUMO
Uniformly sized silica-coated magnetic nanoparticles (magnetite@silica) are synthesized in a simple one-pot process using reverse micelles as nanoreactors. The core diameter of the magnetic nanoparticles is easily controlled by adjusting the w value ([polar solvent]/[surfactant]) in the reverse-micelle solution, and the thickness of the silica shell is easily controlled by varying the amount of tetraethyl orthosilicate added after the synthesis of the magnetite cores. Several grams of monodisperse magnetite@silica nanoparticles can be synthesized without going through any size-selection process. When crosslinked enzyme molecules form clusters on the surfaces of the magnetite@silica nanoparticles, the resulting hybrid composites are magnetically separable, highly active, and stable under harsh shaking conditions for more than 15 days. Conversely, covalently attached enzymes on the surface of the magnetite@silica nanoparticles are deactivated under the same conditions.
Assuntos
Magnetismo , Nanopartículas/química , Nanopartículas/ultraestrutura , Dióxido de Silício/química , Catálise , Reagentes de Ligações Cruzadas/química , Enzimas Imobilizadas/química , Enzimas Imobilizadas/metabolismo , Microscopia Eletrônica de Transmissão , Estrutura Molecular , Difração de Raios XRESUMO
Here, we report the first electrochemical assessment of organophosphonate-based compound as a safe electrode material for lithium-ion batteries, which highlights the reversible redox activity and inherent flame retarding property. Dinickel 1,4-benzenediphosphonate delivers a high reversible capacity of 585 mA h g-1 with stable cycle performance. It expands the scope of organic batteries, which have been mainly dominated by the organic carbonyl family to date. The redox chemistry is elucidated by X-ray absorption spectroscopy and solid-state 31P NMR investigations. Differential scanning calorimetry profiles of the lithiated electrode material exhibit suppressed heat release, delayed onset temperature, and endothermic behavior in the elevated temperature zone.