Isolation of the 3ß-HSD promoter from Digitalis ferruginea subsp. ferruginea and its functional characterization in Arabidopsis thaliana.

BACKGROUND: Although members of the SDR gene family (short chain dehydrogenase) are distributed in kingdom of life, they have diverse roles in stress tolerance mechanism or secondary metabolite biosynthesis. Nevertheless, their precise roles in gene expression or regulation under stress are yet to be understood. METHODS: As a case study, we isolated, sequenced and functionally characterized the 3ß-HSD promoter from Digitalis ferruginea subsp. ferruginea in Arabidopsis thaliana. RESULTS: The promoter fragment contained light and stress response elements such as Box-4, G-Box, TCT-motif, LAMP element, ABRE, ARE, WUN-motif, MYB, MYC, W box, STRE and Box S. The functional analysis of the 3ß-HSD promoter in transgenic Arabidopsis seedlings showed that the promoter was expressed in cotyledon and root elongation zone in 2 days' seedlings. However, this expression was extended to hypocotyl and complete root in 6 days' seedlings. In 20 days-old seedlings, promoter expression was distributed to the whole seedling including hydathodes aperture, vascular bundle, shoot apical meristem, trichomes, midrib, leaf primordia, hypocotyl and xylem tissues. Further, expression of the promoter was enhanced or remained stable under the different abiotic stress conditions like osmotic, heat, cold, cadmium or low pH. In addition, the promoter also showed response to methyl jasmonate (MeJA) application. The expression could not be induced in wounded cotyledon most likely due to lack of interacting elements in the promoter fragment. CONCLUSIONS: Taken together, the 3ß-HSD promoter could be a candidate for the development of transgenic plants especially under changing environmental conditions.

Inducible expression of human papillomavirus-16 L1 capsomeres in the plastomes of Nicotiana tabacum: Transplastomic plants develop normal flowers and pollen.

Human papillomavirus type-16 (HPV-16) is the major HPV type involved in causing cervical cancer among women. The disease burden is high in developing and underdeveloped countries. Previously, the constitutive expression of HPV-16 L1 protein led to male sterility in transplastomic tobacco plants. Here, the HPV-16 L1 gene was expressed in chloroplasts of Nicotiana tabacum under the control of an ethanol-inducible promoter, trans-activated by nucleus-derived signal peptide. Plants containing nuclear component were transformed with transformation vector pEXP-T7-L1 by biolistic gun. The transformation and homoplasmic status of transformed plants was verified by polymerase chain reaction and Southern blotting, respectively. Protein was induced by spraying 5% ethanol for 7 consecutive days. The correct folding of L1 protein was confirmed by antigen-capture ELISA using a conformation-specific antibody. The L1 protein accumulated up to 3 µg/g of fresh plant material. The L1 protein was further purified using affinity chromatography. All transplastomic plants developed normal flowers and produced viable seeds upon self-pollination. Pollens also showed completely normal structure under light microscope and scanning electron microscopy. These data confirm the use of the inducible expression as plant-safe approach for expressing transgenes in plants, especially those genes that cause detrimental effects on plant growth and morphology.

Plastidial Expression of 3ß-Hydroxysteroid Dehydrogenase and Progesterone 5ß-Reductase Genes Confer Enhanced Salt Tolerance in Tobacco.

The short-chain dehydrogenase/reductase (SDR) gene family is widely distributed in all kingdoms of life. The SDR genes, 3ß-hydroxysteroid dehydrogenase (3ß-HSD) and progesterone 5-ß-reductases (P5ßR1, P5ßR2) play a crucial role in cardenolide biosynthesis pathway in the Digitalis species. However, their role in plant stress, especially in salinity stress management, remains unexplored. In the present study, transplastomic tobacco plants were developed by inserting the 3ß-HSD, P5ßR1 and P5ßR2 genes. The integration of transgenes in plastomes, copy number and transgene expression at transcript and protein level in transplastomic plants were confirmed by PCR, end-to-end PCR, qRT-PCR and Western blot analysis, respectively. Subcellular localization analysis showed that 3ß-HSD and P5ßR1 are cytoplasmic, and P5ßR2 is tonoplast-localized. Transplastomic lines showed enhanced growth in terms of biomass and chlorophyll content compared to wild type (WT) under 300 mM salt stress. Under salt stress, transplastomic lines remained greener without negative impact on shoot or root growth compared to the WT. The salt-tolerant transplastomic lines exhibited enhanced levels of a series of metabolites (sucrose, glutamate, glutamine and proline) under control and NaCl stress. Furthermore, a lower Na+/K+ ratio in transplastomic lines was also observed. The salt tolerance, mediated by plastidial expression of the 3ß-HSD, P5ßR1 and P5ßR2 genes, could be due to the involvement in the upregulation of nitrogen assimilation, osmolytes as well as lower Na+/K+ ratio. Taken together, the plastid-based expression of the SDR genes leading to enhanced salt tolerance, which opens a window for developing saline-tolerant plants via plastid genetic engineering.

Expression of ESAT-6 antigen from Mycobacterium tuberculosis in broccoli: An edible plant.

Tuberculosis (TB) is one of the major infectious diseases caused by Mycobacterium tuberculosis. The development of an effective and economical vaccine for controlling TB is essential especially for developing countries. Edible plants can serve as biofactories to produce vaccine antigens. In this study, 6 kDa early secretory antigenic target (ESAT-6) of M. tuberculosis was expressed in Brassica oleracea var. italica via Agrobacterium-mediated transformation to facilitate oral delivery of antigen. ESAT-6 gene was cloned using Gateway® cloning strategy. Transformation and presence of transgene was confirmed through PCR. Expression level of transgene was calculated via quantitative real-time PCR (qRT-PCR) and the maximum integrated transgene number was two. Maximum amount of total soluble fraction of ESAT-6 was evaluated by immunoblotting, estimated to accumulate up to 0.5% of total soluble protein. The recombinant ESAT-6 protein was further purified and detected using silver staining and Western blotting. ESAT-6 protein induced humoral immune response in mice immunized orally and subcutaneously. The expression of M. tuberculosis antigen in edible plants could aid in the development of cost-effective and oral delivery of an antigen-based subunit vaccine against TB. To the best our knowledge, it is the first report of expression of a vaccine antigen in broccoli.

Production of dengue virus envelope protein domain III-based antigens in tobacco chloroplasts using inducible and constitutive expression systems.

Dengue fever is a disease in many parts of the tropics and subtropics and about half the world's population is at risk of infection according to the World Health Organization. Dengue is caused by any of the four related dengue virus serotypes DEN-1, -2, -3 and -4, which are transmitted to people by Aedes aegypti mosquitoes. Currently there is only one vaccine (Dengvaxia(®)) available (limited to a few countries) on the market since 2015 after half a century's intensive efforts. Affordable and accessible vaccines against dengue are hence still urgently needed. The dengue envelop protein domain III (EDIII), which is capable of eliciting serotype-specific neutralizing antibodies, has become the focus for subunit vaccine development. To contribute to the development of an accessible and affordable dengue vaccine, in the current study we have used plant-based vaccine production systems to generate a dengue subunit vaccine candidate in tobacco. Chloroplast genome engineering was applied to express serotype-specific recombinant EDIII proteins in tobacco chloroplasts using both constitutive and ethanol-inducible expression systems. Expression of a tetravalent antigen fusion construct combining EDIII polypeptides from all four serotypes was also attempted. Transplastomic EDIII-expressing tobacco lines were obtained and homoplasmy was verified by Southern blot analysis. Northern blot analyses showed expression of EDIII antigen-encoding genes. EDIII protein accumulation levels varied for the different recombinant EDIII proteins and the different expression systems, and reached between 0.8 and 1.6 % of total cellular protein. Our study demonstrates the suitability of the chloroplast compartment as a production site for an EDIII-based vaccine candidate against dengue fever and presents a Gateway(®) plastid transformation vector for inducible transgene expression.

Challenges and perspectives in commercializing plastid transformation technology.

Plastid transformation has emerged as an alternative platform to generate transgenic plants. Attractive features of this technology include specific integration of transgenes-either individually or as operons-into the plastid genome through homologous recombination, the potential for high-level protein expression, and transgene containment because of the maternal inheritance of plastids. Several issues associated with nuclear transformation such as gene silencing, variable gene expression due to the Mendelian laws of inheritance, and epigenetic regulation have not been observed in the plastid genome. Plastid transformation has been successfully used for the production of therapeutics, vaccines, antigens, and commercial enzymes, and for engineering various agronomic traits including resistance to biotic and abiotic stresses. However, these demonstrations have usually focused on model systems such as tobacco, and the technology per se has not yet reached the market. Technical factors limiting this technology include the lack of efficient protocols for the transformation of cereals, poor transgene expression in non-green plastids, a limited number of selection markers, and the lengthy procedures required to recover fully segregated plants. This article discusses the technology of transforming the plastid genome, the positive and negative features compared with nuclear transformation, and the current challenges that need to be addressed for successful commercialization.

How can plant genetic engineering contribute to cost-effective fish vaccine development for promoting sustainable aquaculture?

Aquaculture, the fastest growing food-producing sector, now accounts for nearly 50 % of the world's food fish (FAO in The state of world fisheries and aquaculture. FAO, Rome, 2010). The global aquaculture production of food fish reached 62.7 million tonnes in 2011 and is continuously increasing with an estimated production of food fish of 66.5 million tonnes in 2012 (a 9.4 % increase in 1 year, FAO, www.fao.org/fishery/topic/16140 ). Aquaculture is not only important for sustainable protein-based food fish production but also for the aquaculture industry and economy worldwide. Disease prevention is the key issue to maintain a sustainable development of aquaculture. Widespread use of antibiotics in aquaculture has led to the development of antibiotic-resistant bacteria and the accumulation of antibiotics in the environment, resulting in water and soil pollution. Thus, vaccination is the most effective and environmentally-friendly approach to combat diseases in aquaculture to manage fish health. Furthermore, when compared to >760 vaccines against human diseases, there are only about 30 fish vaccines commercially available, suggesting the urgent need for development and cost-effective production of fish vaccines for managing fish health, especially in the fast growing fish farming in Asia where profit is minimal and therefore given high priority. Plant genetic engineering has made significant contributions to production of biotech crops for food, feed, valuable recombinant proteins etc. in the past three decades. The use of plants for vaccine production offers several advantages such as low cost, safety and easy scaling up. To date a large number of plant-derived vaccines, antibodies and therapeutic proteins have been produced for human health, of which a few have been made commercially available. However, the development of animal vaccines in plants, especially fish vaccines by genetic engineering, has not yet been addressed. Therefore, there is a need to exploit plant biotechnology for cost effective fish vaccine development in plants, in particular, edible crops for oral fish vaccines. This review provides insight into (1) the current status of fish vaccine and vaccination in aquaculture, (2) plant biotechnology and edible crops for fish vaccines for oral administration, (3) regulatory constraints and (4) conclusions and future perspectives.

A novel chloroplast transformation vector compatible with the Gateway(®) recombination cloning technology.

To analyze the suitability of Gateway(®) vectors for transformation of chloroplasts, we converted a standard plastid transformation vector into a Gateway(®) destination vector containing the necessary recombination sites attR1 and attR2. Insertion of the green fluorescent protein (GFP) coding sequence with associated T7g10 ribosome binding site into this destination vector created the expression vector for transformation of tobacco chloroplasts with the biolistic method. Correct integration of the transgene into the plastid genome was verified by PCR and the homoplasmic nature of the transformed plants was confirmed by Southern Blot analysis. Expression of the GFP reporter protein was monitored by confocal laser scanning microscopy (CLSM) and quantification by western blot analysis showed a GFP accumulation level of 3% total soluble protein (TSP). The presented results clearly demonstrate that the Gateway(®) recombination sites are compatible with all steps of plastid transformation, from generation of transplastomic plants to expression of GFP. This is the first report of a plastid transformation vector made by the Gateway(®) recombinant cloning technology, which proves the suitability of this system for use in chloroplasts.

Chloroplast-derived vaccines against human diseases: achievements, challenges and scopes.

Infectious diseases represent a continuously growing menace that has severe impact on health of the people worldwide, particularly in the developing countries. Therefore, novel prevention and treatment strategies are urgently needed to reduce the rate of these diseases in humans. For this reason, different options can be considered for the production of affordable vaccines. Plants have been proved as an alternative expression system for various compounds of biological importance. Particularly, plastid genetic engineering can be potentially used as a tool for cost-effective vaccine production. Antigenic proteins from different viruses and bacteria have been expressed in plastids. Initial immunological studies of chloroplast-derived vaccines have yielded promising results in animal models. However, because of certain limitations, these vaccines face many challenges on production and application level. Adaptations to the novel approaches are needed, which comprise codon usage and choice of proven expression cassettes for the optimal yield of expressed proteins, use of inducible systems, marker gene removal, selection of specific antigens with high immunogenicity and development of tissue culture systems for edible crops to prove the concept of low-cost edible vaccines. As various aspects of plant-based vaccines have been discussed in recent reviews, here we will focus on certain aspects of chloroplast transformation related to vaccine production against human diseases.

Plastid expression of a double-pentameric vaccine candidate containing human papillomavirus-16 L1 antigen fused with LTB as adjuvant: transplastomic plants show pleiotropic phenotypes.

Human papillomavirus (HPV) causes cervical cancer in women worldwide, which is currently prevented by vaccines based on virus-like particles (VLPs). However, these vaccines have certain limitations in their availability to developing countries, largely due to elevated costs. Concerning the highest burden of disease in resource-poor countries, development of an improved mucosal and cost-effective vaccine is a necessity. As an alternative to VLPs, capsomeres have been shown to be highly immunogenic and can be used as vaccine candidate. Furthermore, coupling of an adjuvant like Escherichia coli heat-labile enterotoxin subunit B (LTB) to an antigen can increase its immunogenicity and reduce the costs related to separate co-administration of adjuvants. Our study demonstrates the expression of two pentameric proteins: the modified HPV-16 L1 (L1_2xCysM) and LTB as a fusion protein in tobacco chloroplasts. Homoplasmy of the transplastomic plants was confirmed by Southern blotting. Western blot analysis showed that the LTB-L1 fusion protein was properly expressed in the plastids and the recombinant protein was estimated to accumulate up to 2% of total soluble protein. Proper folding and display of conformational epitopes for both LTB and L1 in the fusion protein was confirmed by GM1-ganglioside binding assay and antigen capture ELISA, respectively. However, all transplastomic lines showed chlorosis, male sterility and growth retardation, which persisted in the ensuing four generations studied. Nevertheless, plants reached maturity and produced seeds by pollination with wild-type plants. Taken together, these results pave the way for the possible development of a low-cost adjuvant-coupled vaccine with potentially improved immunogenicity against cervical cancer.

Transplastomic expression of a modified human papillomavirus L1 protein leading to the assembly of capsomeres in tobacco: a step towards cost-effective second-generation vaccines.

Certain types of human papillomaviruses (HPV) are causatively associated with cervical carcinoma, the second most common cancer in women worldwide. Due to limitations in the availability of currently used virus-like particle (VLP)-based vaccines against HPV to women of developing countries, where most cases of cervical cancer occur, the development of a cost-effective second-generation vaccine is a necessity. Capsomeres have recently been demonstrated to be highly immunogenic and to have a number of advantages as a potential cost-effective alternative to VLP-based HPV vaccines. We have expressed a mutated HPV-16 L1 (L1_2xCysM) gene that retained the ability to assemble L1 protein to capsomeres in tobacco chloroplasts. The recombinant protein yielded up to 1.5% of total soluble protein. The assembly of capsomeres was examined and verified by cesium chloride density gradient centrifugation and sucrose sedimentation analysis. An antigen capture enzyme-linked immunosorbent assay confirmed the formation of capsomeres by using a conformation-specific monoclonal antibody which recognized the conformational epitopes. Transplastomic tobacco plants exhibited normal growth and morphology, but all such lines showed male sterility in the T0, T1 and T2 generations. Taken together, these results indicate the possibility of producing a low-cost capsomere-based vaccine by plastids.

Root colonization by symbiotic arbuscular mycorrhizal fungi increases sesquiterpenic acid concentrations in Valeriana officinalis L.

In some medicinal plants a specific plant-fungus association, known as arbuscular mycorrhizal (AM) symbiosis, increases the levels of secondary plant metabolites and/or plant growth. In this study, the effects of three different AM treatments on biomass and sesquiterpenic acid concentrations in two IN VITRO propagated genotypes of valerian ( VALERIANA OFFICINALIS L., Valerianaceae) were investigated. Valerenic, acetoxyvalerenic and hydroxyvalerenic acid levels were analyzed in the rhizome and in two root fractions. Two of the AM treatments significantly increased the levels of sesquiterpenic acids in the underground parts of valerian. These treatments, however, influenced the biomass of rhizomes and roots negatively. Therefore this observed increase was not accompanied by an increase in yield of sesquiterpenic acids per plant. Furthermore, one of the two genotypes had remarkably high hydroxyvalerenic acid contents and can be regarded as a hydroxyvalerenic acid chemotype.

Chloroplast-based inducible expression of ESAT-6 antigen for development of a plant-based vaccine against tuberculosis.

Mycobacterium tuberculosis causes tuberculosis in humans. The major disease burden of tuberculosis lies in developing countries. Lack of an effective vaccine for adults is one of the major hurdles for controlling this deadly disease. In the present study, 6 kDa early secretory antigenic target (ESAT-6) of M. tuberculosis was inducibly expressed in chloroplasts of Nicotiana tabacum. The expression of ESAT-6 in chloroplasts was controlled by T7 promoter that was activated by nuclear-generated signal peptide. Tobacco plants, containing nuclear component, were transformed via biolistic bombardment with pEXP-T7-ESAT-6 obtained by Gateway® cloning. Transformation and homoplasmic status of transplastomic plants was confirmed by polymerase chain reaction and Southern blotting. Plants were induced for protein expression by spraying with 5% ethanol for 1 day, 3 days, 7 days and 10 days. ESAT-6 protein was detected by immunoblot analysis and maximum protein was obtained for 10 days induced plants that was estimated to accumulate up to 1.2% of total soluble fraction of protein. Transplastomic plants showed completely normal morphology. Transplastomic and untransformed plants became slightly chlorotic upon prolonged exposure to ethanol until 10 days. Taken together, this data could help in the development of an antigen-based subunit vaccine against tuberculosis.

Chloroplast-Based Expression of Recombinant Proteins by Gateway® Cloning Technology.

Plastid transformation for the expression of recombinant proteins and entire enzymatic pathways has become a promising tool for plant biotechnology in the past decade. Several improvements of the technology have turned plant plastids into robust and dependable expression platforms for multiple high value compounds. In this chapter, we describe our current methodology based on Gateway(®) recombinant cloning, which we have adapted for plastid transformation. We describe the steps required for cloning, biolistic transformation, identification, and regeneration of transplastomic plant lines and Western blot analysis.

Need of cost-effective vaccines in developing countries: What plant biotechnology can offer?

To treat current infectious diseases, different therapies are used that include drugs or vaccines or both. Currently, the world is facing an increasing problem of drug resistance from many pathogenic microorganisms. In majority of cases, when vaccines are used, formulations consist of live attenuated microorganisms. This poses an additional risk of infection in immunocompromised patients and people suffering from malnutrition in developing countries. Therefore, there is need to improve drug therapy as well as to develop next generation vaccines, in particular against infectious diseases with highest mortality rates. For patients in developing countries, costs related to treatments are one of the major hurdles to reduce the disease burden. In many cases, use of prophylactic vaccines can help to control the incidence of infectious diseases. In the present review, we describe some infectious diseases with high impact on health of people in low and middle income countries. We discuss the prospects of plants as alternative platform for the development of next-generation subunit vaccines that can be a cost-effective source for mass immunization of people in developing countries.

Plastids: The Green Frontiers for Vaccine Production.

Infectious diseases pose an increasing risk to health, especially in developing countries. Vaccines are available to either cure or prevent many of these diseases. However, there are certain limitations related to these vaccines, mainly the costs, which make these vaccines mostly unaffordable for people in resource poor countries. These costs are mainly related to production and purification of the products manufactured from fermenter-based systems. Plastid biotechnology has become an attractive platform to produce biopharmaceuticals in large amounts and cost-effectively. This is mainly due to high copy number of plastids DNA in mature chloroplasts, a characteristic particularly important for vaccine production in large amounts. An additional advantage lies in the maternal inheritance of plastids in most plant species, which addresses the regulatory concerns related to transgenic plants. These and many other aspects of plastids will be discussed in the present review, especially those that particularly make these green biofactories an attractive platform for vaccine production. A summary of recent vaccine antigens against different human diseases expressed in plastids will also be presented.

Expression of HPV-16 L1 capsomeres with glutathione-S-transferase as a fusion protein in tobacco plastids: an approach for a capsomere-based HPV vaccine.

Human Papillomavirus (HPV) is the main cause of cervical cancer, which is the second most severe cancer of women worldwide, particularly in developing countries. Although vaccines against HPV infection are commercially available, they are neither affordable nor accessible to women in low income countries e.g. Africa. Thus, alternative cost-effective vaccine production approaches need to be developed. This study uses tobacco plants to express pentameric capsomeres of HPV that have been reported to generate elevated immune responses against HPV. A modified HPV-16 L1 (L1_2xCysM) protein has been expressed as a fusion protein with glutathione-S-transferase (GST) in tobacco chloroplasts following biolistic transformation. In total 7 transplastomic lines with healthy phenotypes were generated. Site specific integration of the GST-L1_2xCysM and aadA genes was confirmed by PCR. Southern blot analysis verified homogenous transformation of all transplastomic lines. Antigen capture ELISA with the conformation-specific antibody Ritti01, showed protein expression as well as the retention of immunogenic epitopes of L1 protein. In their morphology, GST-L1 expressing tobacco plants were identical to wild type plants and yielded fertile flowers. Taken together, these data enrich knowledge for future development of cost-effective plant-made vaccines against HPV.

Conference scene: molecular pharming: manufacturing medicines in plants.

Within the expanding area of molecular pharming, the development of plants for manufacturing immunoglobulins, enzymes, virus-like particles and vaccines has become a major focus point. On 21 September 2012, the meeting 'Molecular Pharming - recent progress in manufacturing medicines in plants', hosted by EuroSciCon, was held at the Bioscience Catalyst campus, Stevenage, UK. The scientific program of this eventful meeting covered diverse highlights of biopharming: monoclonal antibodies, virus-like particles from transient and chloroplast expression systems, for example, for Dengue and HPV, apolipoproteins from safflower seeds, and new production platforms, such as potato or hydroponics by rhizosecretion. This report summarizes the stimulating scientific presentations and fruitful panel discussions on the current topics in this promising research field.

Plant-derived vaccines: an approach for affordable vaccines against cervical cancer.

Several types of human papillomavirus (HPV) are causatively associated with cervical cancer, which is the second most common cancer in women worldwide. HPV-16 and 18 are among the high risk types and responsible for HPV infection in more than 70% of the cases. The majority of cervical cancer cases occur in developing countries. Currently available HPV vaccines are expensive and probably unaffordable for most women in low and middle income countries. Therefore, there is a need to develop cost-effective vaccines for these countries. Due to many advantages, plants offer an attractive platform for the development of affordable vaccines. These include low cost of production, scalability, low health risks and the potential ability to be used as unprocessed or partially processed material. Among several techniques, chloroplast transformation is of eminent interest for the production of vaccines because of high yield of foreign protein and lack of transgene transmission through pollen. In this commentary, we focus on the most relevant aspects of plant-derived vaccines that are decisive for the future development of cost-effective HPV vaccines.