Plant-environment microscopy tracks interactions of Bacillus subtilis with plant roots across the entire rhizosphere.

Our understanding of plant-microbe interactions in soil is limited by the difficulty of observing processes at the microscopic scale throughout plants' large volume of influence. Here, we present the development of three-dimensional live microscopy for resolving plant-microbe interactions across the environment of an entire seedling growing in a transparent soil in tailor-made mesocosms, maintaining physical conditions for the culture of both plants and microorganisms. A tailor-made, dual-illumination light sheet system acquired photons scattered from the plant while fluorescence emissions were simultaneously captured from transparent soil particles and labeled microorganisms, allowing the generation of quantitative data on samples ∼3,600 mm3 in size, with as good as 5 µm resolution at a rate of up to one scan every 30 min. The system tracked the movement of Bacillus subtilis populations in the rhizosphere of lettuce plants in real time, revealing previously unseen patterns of activity. Motile bacteria favored small pore spaces over the surface of soil particles, colonizing the root in a pulsatile manner. Migrations appeared to be directed toward the root cap, the point of "first contact," before the subsequent colonization of mature epidermis cells. Our findings show that microscopes dedicated to live environmental studies present an invaluable tool to understand plant-microbe interactions.

4-Vinyl Guaiacol: A Key Intermediate for Biobased Polymers.

In order to contribute to the shift from petro-based chemistry to biobased chemistry, necessary to minimize the environmental impacts of the chemical industry, 2-methoxy-4-vinylphenol (4-vinyl guaiacol, 4VG) was used to synthesize a platform of biobased monomers. Thus, nine biobased monomers were successfully prepared. The synthesis procedures were investigated through the green metrics calculations in order to quantify the sustainability of our approaches. Their radical homopolymerization in toluene solution initiated by 2,2'-azobis(2-methylpropionitrile) (AIBN) was studied and the effect of residual 4VG as a radical inhibitor on the kinetics of polymerization was also explored. The new homopolymers were characterized by proton nuclear magnetic resonance (1H-NMR) spectroscopy, size exclusion chromatography and thermal analyses (dynamical scanning calorimetry DSC, thermal gravimetric analysis TGA). By varying the length of the alkyl ester or ether group of the 4VG derivatives, homopolymers with Tg ranging from 117 °C down to 5 °C were obtained. These new biobased monomers could be implemented in radical copolymerization as substitutes to petro-based monomers to decrease the carbon footprint of the resulting copolymers for various applications.

Catalyst-Free Thia-Michael Addition to α-Trifluoromethylacrylates for 3D Network Synthesis.

Thia-Michael additions (1,4-additions of a thiol to a Michael acceptor) are generally catalyzed by an external Brønsted or Lewis base. A spontaneous (uncatalyzed) Michael addition of thiols to α-trifluoromethyl acrylates is described, as well as its application to the very efficient preparation of a thermoset. A thorough mechanistic investigation, based on an experimental kinetic study and on DFT calculations, is presented for the addition of arene- and alkanethiols to tert-butyl trifluoromethyl acrylate in polar aprotic solvents, unveiling a probable solvent-assisted proton transfer in the rate-determining step and a considerable lowering of the energy barrier induced by the CF3 group.

Dynamic PEG-PLA/Hydroxyurethane Networks Based on Imine Bonds as Reprocessable Elastomeric Biomaterials.

The development of dynamic covalent chemistry opens the way to the design of materials able to be reprocessed by an internal exchange reaction under thermal stimulus. Imine exchange differs from other exchange reactions by its relatively low temperature of activation. In this study, amine-functionalized star-shaped PEG-PLA and an aldehyde-functionalized hydroxyurethane modifier were combined to produce PEG-PLA/hydroxyurethane networks incorporating imine bonds. The thermal and mechanical properties of these new materials were evaluated as a function of the initial ratio of amine/aldehyde used during synthesis. Rheological analyses highlighted the dynamic behavior of these vitrimers at moderate temperature (60-85 °C) and provided the flow activation energies. Additionally, the reprocessability of these PEG-PLA/hydroxyurethane vitrimers was assessed by comparing the material properties before reshaping and after three reprocessing cycles (1 ton, 1 h, 70 °C). Hence, these materials can easily be designed to satisfy a specific medical application without properties loss. This work opens the way to the development of a new generation of dynamic materials combining degradable PEG-PLA copolymers and hydroxyurethane modifiers, which could find applications in the shape of medical devices on-demand under mild conditions.

Original Fluorinated Non-Isocyanate Polyhydroxyurethanes.

New fluorinated polyhydroxyurethanes (FPHUs) with various molar weights were synthesized via the polyaddition reaction of a fluorinated telechelic bis(cyclocarbonate) (bis-CC) with a diamine. The fluorinated bis-CC was initially synthesized by carbonylation of a fluorinated diepoxide, 1,4-bis(2',3'-epoxypropyl)perfluorobutane, in the presence of LiBr catalyst, in high yield. Then, several reaction conditions were optimized through the model reactions of the fluorinated bis-CC with hexylamine. Subsequently, fluorinated polymers bearing hydroxyurethane moieties (FPHUs) were prepared by reacting the bis-CC with different hexamethylenediamine amounts in bulk at 80 °C and the presence of a catalyst. The chemoselective polymerization reaction yielded three isomers bearing primary and secondary hydroxyl groups in 61-82% yield. The synthesized fluorinated CCs and the corresponding FPHUs were characterized by 1H, 19F, and 13C NMR spectroscopy. They were compared to their hydrogenated homologues synthesized in similar conditions. The gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) data of the FPHUs revealed a higher molar mass and a slight increase in glass transition and decomposition temperatures compared to those of the PHUs.

Dihydroxyacetone: A User Guide for a Challenging Bio-Based Synthon.

1,3-dihydroxyacetone (DHA) is an underrated bio-based synthon, with a broad range of reactivities. It is produced for the revalorization of glycerol, a major side-product of the growing biodiesel industry. The overwhelming majority of DHA produced worldwide is intended for application as a self-tanning agent in cosmetic formulations. This review provides an overview of the discovery, physical and chemical properties of DHA, and of its industrial production routes from glycerol. Microbial fermentation is the only industrial-scaled route but advances in electrooxidation and aerobic oxidation are also reported. This review focuses on the plurality of reactivities of DHA to help chemists interested in bio-based building blocks see the potential of DHA for this application. The handling of DHA is delicate as it can undergo dimerization as well as isomerization reactions in aqueous solutions at room temperature. DHA can also be involved in further side-reactions, yielding original side-products, as well as compounds of interest. If this peculiar reactivity was harnessed, DHA could help address current sustainability challenges encountered in the synthesis of speciality polymers, ranging from biocompatible polymers to innovative polymers with cutting-edge properties and improved biodegradability.

Understanding the Reshaping of Fluorinated Polyester Vitrimers by Kinetic and DFT Studies of the Transesterification Reaction.

Vitrimers are a third class of polymers gathering the mechanical properties and solvent resistance of 3D thermosets and the reprocessability of thermoplastics. This unique behaviour is due to the triggering of certain covalent exchange reactions that allow the network to rearrange upon application of a stimulus. The constitutive feature of vitrimers is the adoption of a glass-like viscosity during the rearrangement of the network, often due to an associative mechanism for the exchange reaction. Transesterification networks are one of the most studied type of vitrimers that usually require the incorporation of a catalyst, implying the associated drawbacks. Following up on a recent report on catalyst-free transesterification vitrimers in which the ester functions are particularly reactive thanks to the presence of fluorine atoms in α- or ß-position, parallel DFT calculations and an experimental kinetic study on model molecules are presented in order to quantitatively assess the effect of neighbouring fluorinated groups on the transesterification reaction rate.

Coordination Adaptable Networks: Zirconium(IV) Carboxylates.

Vitrimers are 3D "covalent adaptable networks" (CANs) with flow properties thanks to thermally activated associative exchange reactions. This contribution introduces coordination adaptable networks, or CooANs, that are topologically related to metal-organic frameworks with octahedral Zr6 clusters as secondary building units in a carboxylic acid-functionalized acrylate-methacrylate copolymer matrix. A series of Zr-CooAN-x materials (x=percent of Zr6 loading relative to maximum capacity) was synthesized with x=5, 10, 15, 20, 25, 50 and 100. The mechanical and rheological investigations demonstrate vitrimer-like properties for x up to 50, the crosslink migration being ensured by carboxylate ligand exchange, with relaxation becoming slower as the Zr6 content is increased. The flow activation energy of Zr-CooAN-10 is 92.9±3.6 kJ mol-1 . Rapid (30 min) hot-press reshaping occurs at temperatures in the 50-100 °C range under a 3-ton pressure and does not significantly alter the material properties.

Stimuli-Responsive Thiomorpholine Oxide-Derived Polymers with Tailored Hydrophilicity and Hemocompatible Properties.

Thermo-responsive hydrophilic polymers, including those showing tuneable lower critical solution temperature (LCST), represent a continuous subject of exploration for a variety of applications, but particularly in nanomedicine. Since biological pH changes can inform the organism about the presence of disequilibrium or diseases, the development of dual LCST/pH-responsive hydrophilic polymers with biological potential is an attractive subject in polymer science. Here, we present a novel polymer featuring LCST/pH double responsiveness. The monomer ethylthiomorpholine oxide methacrylate (THOXMA) can be polymerised via the RAFT process to obtain well-defined polymers. Copolymers with hydroxyethyl methacrylate (HEMA) were prepared, which allowed the tuning of the LCST behaviour of the polymers. Both, the LCST behaviour and pH responsiveness of hydrophilic PTHOXMA were tested by following the evolution of particle size by dynamic light scattering (DLS). In weak and strong alkaline conditions, cloud points ranged between 40-60 °C, while in acidic medium no LCST was found due to the protonation of the amine of the THOX moieties. Additional cytotoxicity assays confirmed a high biocompatibility of PTHOXMA and haemolysis and aggregation assays proved that the thiomorpholine oxide-derived polymers did not cause aggregation or lysis of red blood cells. These preliminary results bode well for the use of PTHOXMA as smart material in biological applications.

Radical Aqueous Emulsion Copolymerization of Eugenol-Derived Monomers for Adhesive Applications.

Biobased monomers derived from eugenol were copolymerized by emulsion polymerization to produce latexes for adhesive applications. Stable latexes containing ethoxy dihydroeugenyl methacrylate and ethoxy eugenyl methacrylate with high total solids content of 50 wt % were obtained and characterized. Latexes synthesis was carried out using a semibatch process, and latexes with particle diameters in the range of 159-178 nm were successfully obtained. Glass transition temperature values of the resulting polymers ranged between -32 and -28 °C. Furthermore, tack and peel measurements confirmed the possibility to use these latexes in adhesive applications.

Evaluation of Self-Assembly Pathways to Control Crystallization-Driven Self-Assembly of a Semicrystalline P(VDF-co-HFP)-b-PEG-b-P(VDF-co-HFP) Triblock Copolymer.

To date, amphiphilic block copolymers (BCPs) containing poly(vinylidene fluoride-co-hexafluoropropene) (P(VDF-co-HFP)) copolymers are rare. At moderate content of HFP, this fluorocopolymer remains semicrystalline and is able to crystallize. Amphiphilic BCPs, containing a P(VDF-co-HFP) segment could, thus be appealing for the preparation of self-assembled block copolymer morphologies through crystallization-driven self-assembly (CDSA) in selective solvents. Here the synthesis, characterization by 1H and 19F NMR spectroscopies, GPC, TGA, DSC, and XRD; and the self-assembly behavior of a P(VDF-co-HFP)-b-PEG-b-P(VDF-co-HFP) triblock copolymer were studied. The well-defined ABA amphiphilic fluorinated triblock copolymer was self-assembled into nano-objects by varying a series of key parameters such as the solvent and the non -solvent, the self-assembly protocols, and the temperature. A large range of morphologies such as spherical, square, rectangular, fiber-like, and platelet structures with sizes ranging from a few nanometers to micrometers was obtained depending on the self-assembly protocols and solvents systems used. The temperature-induced crystallization-driven self-assembly (TI-CDSA) protocol allowed some control over the shape and size of some of the morphologies.

Photoinduced Polymerization of Eugenol-Derived Methacrylates.

Biobased monomers have been used to replace their petroleum counterparts in the synthesis of polymers that are aimed at different applications. However, environmentally friendly polymerization processes are also essential to guarantee greener materials. Thus, photoinduced polymerization, which is low-energy consuming and solvent-free, rises as a suitable option. In this work, eugenol-, isoeugenol-, and dihydroeugenol-derived methacrylates are employed in radical photopolymerization to produce biobased polymers. The polymerization is monitored in the absence and presence of a photoinitiator and under air or protected from air, using Real-Time Fourier Transform Infrared Spectroscopy. The polymerization rate of the methacrylate double bonds was affected by the presence and reactivity of the allyl and propenyl groups in the eugenol- and isoeugenol-derived methacrylates, respectively. These groups are involved in radical addition, degradative chain transfer, and termination reactions, yielding crosslinked polymers. The materials, in the form of films, are characterized by differential scanning calorimetry, thermogravimetric, and contact angle analyses.

Grafting of Polymer Brushes from Xanthate-Functionalized Silica Particles.

Monodisperse silica particles (SiPs) were surface-modified with a newly designed silane coupling agent comprising a triethoxysilane and an alkyl halide, namely, 6-(triethoxysilyl)hexyl 2-bromopropionate, which was further treated with potassium O-ethyl dithiocarbonate (PEX) to immobilize xanthate molecules on the particle surfaces. Surface-initiated macromolecular design via interchange of xanthates (MADIX) polymerization of vinyl acetate (VAc) was conducted with the xanthate-functionalized SiPs. The polymerization was well controlled and produced SiPs coated with poly(vinyl acetate) (PVAc) with a well-defined target molar mass and a graft density of about 0.2 chains nm-2 . Dynamic light scattering and TEM measurements revealed that the hybrid particles were highly dispersible in good solvents without any aggregation. The PVAc brushes were hydrolyzed with hydrochloric acid to produce poly(vinyl alcohol) brushes on the SiP surfaces. In addition, the number of xanthate molecules introduced on the SiP surfaces could be successfully controlled by adjusting the concentration of PEX. Thus, the SiPs have two functionalities: xanthates able to act as a MADIX chain-transfer agent and alkyl bromide initiation sites for atom transfer radical polymerization (ATRP). By using these unique bifunctional particles, mixed polymer brushes were constructed on the SiPs by MADIX of VAc followed by ATRP of styrene or methyl methacrylate.

Fluoroalkyl Radical Generation by Homolytic Bond Dissociation in Pentacarbonylmanganese Derivatives.

Thermal decarbonylation of the acyl compounds [Mn(CO)5 (CORF )] (RF =CF3 , CHF2 , CH2 CF3 , CF2 CH3 ) yielded the corresponding alkyl derivatives [Mn(CO)5 (RF )], some of which have not been previously reported. The compounds were fully characterized by analytical and spectroscopic methods and by several single-crystal X-ray diffraction studies. The solution-phase IR characterization in the CO stretching region, with the assistance of DFT calculations, has allowed the assignment of several weak bands to vibrations of the [Mn(12 CO)4 (eq-13 CO)(RF )] and [Mn(12 CO)4 (ax-13 CO)(RF )] isotopomers and a ranking of the RF donor power in the order CF3

Organometallic-Mediated Radical Polymerization of Vinylidene Fluoride.

An unprecedented level of control for the radical polymerization of vinylidene fluoride (VDF), yielding well-defined PVDF (at least up to 14 500 g mol-1 ) with low dispersity (≤1.32), was achieved using organometallic-mediated radical polymerization (OMRP) with an organocobalt compound as initiator. The high chain-end fidelity was demonstrated by the synthesis of PVDF- and PVAc-containing di-and triblock copolymers. DFT calculations rationalize the efficient reactivation of both head and tail chain end dormant species.

Organometallic-Mediated Alternating Radical Copolymerization of tert-Butyl-2-Trifluoromethacrylate with Vinyl Acetate and Synthesis of Block Copolymers Thereof.

Organometallic-mediated radical polymerization (OMRP) has given access to well-defined poly(vinyl acetate-alt-tert-butyl-2-trifluoromethacrylate)-b-poly(vinyl acetate) and poly(VAc-alt-MAF-TBE) copolymers composed of two electronically distinct monomers: vinyl acetate (VAc, donor, D) and tert-butyl-2-trifluoromethacrylate (MAF-TBE, acceptor, A), with low dispersity (≤1.24) and molar masses up to 57 000 g mol-1 . These copolymers have a precise 1:1 alternating structure over a wide range of comonomer feed compositions. The reactivity ratios are determined as rVAc = 0.01 ± 0.01 and rMAF-TBE = 0 at 40 °C. Remarkably, from a feed containing >50% molar VAc content, poly(VAc-alt-MAF-TBE)-b-PVAc block copolymers are produced via a one-pot synthesis. Such diblock copolymers exhibit two glass transition temperatures attributed to the alternating and homopolymer sequences. The OMRP of this fluorine-containing alternating monomer system may provide access to a wide range of new polymer materials.

Zwitterionic poly(amino acid methacrylate) brushes.

A new cysteine-based methacrylic monomer (CysMA) was conveniently synthesized via selective thia-Michael addition of a commercially available methacrylate-acrylate precursor in aqueous solution without recourse to protecting group chemistry. Poly(cysteine methacrylate) (PCysMA) brushes were grown from the surface of silicon wafers by atom-transfer radical polymerization. Brush thicknesses of ca. 27 nm were achieved within 270 min at 20 °C. Each CysMA residue comprises a primary amine and a carboxylic acid. Surface zeta potential and atomic force microscopy (AFM) studies of the pH-responsive PCysMA brushes confirm that they are highly extended either below pH 2 or above pH 9.5, since they possess either cationic or anionic character, respectively. At intermediate pH, PCysMA brushes are zwitterionic. At physiological pH, they exhibit excellent resistance to biofouling and negligible cytotoxicity. PCysMA brushes undergo photodegradation: AFM topographical imaging indicates significant mass loss from the brush layer, while XPS studies confirm that exposure to UV radiation produces surface aldehyde sites that can be subsequently derivatized with amines. UV exposure using a photomask yielded sharp, well-defined micropatterned PCysMA brushes functionalized with aldehyde groups that enable conjugation to green fluorescent protein (GFP). Nanopatterned PCysMA brushes were obtained using interference lithography, and confocal microscopy again confirmed the selective conjugation of GFP. Finally, PCysMA undergoes complex base-catalyzed degradation in alkaline solution, leading to the elimination of several small molecules. However, good long-term chemical stability was observed when PCysMA brushes were immersed in aqueous solution at physiological pH.

Polymerization-induced self-assembly of galactose-functionalized biocompatible diblock copolymers for intracellular delivery.

Recent advances in polymer science are enabling substantial progress in nanobiotechnology, particularly in the design of new tools for enhanced understanding of cell biology and for smart drug delivery formulations. Herein, a range of novel galactosylated diblock copolymer nano-objects is prepared directly in concentrated aqueous solution via reversible addition-fragmentation chain transfer polymerization using polymerization-induced self-assembly. The resulting nanospheres, worm-like micelles, or vesicles interact in vitro with galectins as judged by a turbidity assay. In addition, galactosylated vesicles are highly biocompatible and allow intracellular delivery of an encapsulated molecular cargo.

New Insight into Nanoscale Identification of the Polar Axis Direction in Organic Ferroelectric Films.

Ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-co-TrFE)] thin films have been deposited by spin-coating onto the Bi0.5Na0.5TiO3(BNT)/LNO/SiO2/Si heterostructure. The copolymer microstructure investigated by using grazing-incidence wide-angle X-ray diffraction (GIWAXD) and deduced from the (200)/(110) reflections demonstrates that the b-axis in the P(VDF-co-TrFE) orthorhombic unit cell is either in the plane or out of the plane, depending on the face-on or on the two types of edge-on (called I and II) lamellar structures locally identified by atomic force microscopy (AFM). For edge-on I lamellae regions, the electroactivity (dzzeff ∼ -50.3 pm/V) is found to be twice as high as that measured for both edge-on II or face-on crystalline domains, as probed by piezoresponse force microscopy (PFM). This result is directly correlated to the direction of the ferroelectric polarization vector in the P(VDF-co-TrFE) orthorhombic cell: larger nanoscale piezoactivity is related to the b-axis which lies along the normal to the substrate plane in the case of the edge-on I domains. Here, the ability to thoroughly gain access to the as-grown polar axis direction within the edge-on crystal lamellae of the ferroelectric organic layers is evidenced by combining the nanometric resolution of the PFM technique with a statistical approach based on its spectroscopic tool. By the gathering of information at the nanoscale, two orientations for the polar b-axis are identified in edge-on lamellar structures. These findings contribute to a better understanding of the structure-property relationships in P(VDF-co-TrFE) films, which is a key issue for the design of future advanced organic electronic devices.

Thia-Michael Reaction: The Route to Promising Covalent Adaptable Networks.

While the Michael addition has been employed for more than 130 years for the synthesis of a vast diversity of compounds, the reversibility of this reaction when heteronucleophiles are involved has been generally less considered. First applied to medicinal chemistry, the reversible character of the hetero-Michael reactions has recently been explored for the synthesis of Covalent Adaptable Networks (CANs), in particular the thia-Michael reaction and more recently the aza-Michael reaction. In these cross-linked networks, exchange reactions take place between two Michael adducts by successive dissociation and association steps. In order to understand and precisely control the exchange in these CANs, it is necessary to get an insight into the critical parameters influencing the Michael addition and the dissociation rates of Michael adducts by reconsidering previous studies on these matters. This review presents the progress in the understanding of the thia-Michael reaction over the years as well as the latest developments and plausible future directions to prepare CANs based on this reaction. The potential of aza-Michael reaction for CANs application is highlighted in a specific section with comparison with thia-Michael-based CANs.