Enhancing magnetic ordering in Cr-doped Bi2Se3 using high-TC ferrimagnetic insulator.

We report a study of enhancing the magnetic ordering in a model magnetically doped topological insulator (TI), Bi(2-x)Cr(x)Se(3), via the proximity effect using a high-TC ferrimagnetic insulator Y(3)Fe(5)O(12). The FMI provides the TI with a source of exchange interaction yet without removing the nontrivial surface state. By performing the elemental specific X-ray magnetic circular dichroism (XMCD) measurements, we have unequivocally observed an enhanced TC of 50 K in this magnetically doped TI/FMI heterostructure. We have also found a larger (6.6 nm at 30 K) but faster decreasing (by 80% from 30 to 50 K) penetration depth compared to that of diluted ferromagnetic semiconductors (DMSs), which could indicate a novel mechanism for the interaction between FMIs and the nontrivial TIs surface.

Magnetization switching through giant spin-orbit torque in a magnetically doped topological insulator heterostructure.

Recent demonstrations of magnetization switching induced by in-plane current in heavy metal/ferromagnetic heterostructures (HMFHs) have drawn great attention to spin torques arising from large spin-orbit coupling (SOC). Given the intrinsic strong SOC, topological insulators (TIs) are expected to be promising candidates for exploring spin-orbit torque (SOT)-related physics. Here we demonstrate experimentally the magnetization switching through giant SOT induced by an in-plane current in a chromium-doped TI bilayer heterostructure. The critical current density required for switching is below 8.9 × 10(4) A cm(-2) at 1.9 K. Moreover, the SOT is calibrated by measuring the effective spin-orbit field using second-harmonic methods. The effective field to current ratio and the spin-Hall angle tangent are almost three orders of magnitude larger than those reported for HMFHs. The giant SOT and efficient current-induced magnetization switching exhibited by the bilayer heterostructure may lead to innovative spintronics applications such as ultralow power dissipation memory and logic devices.

Electrical detection of spin-polarized surface states conduction in (Bi(0.53)Sb(0.47))2Te3 topological insulator.

Strong spin-orbit interaction and time-reversal symmetry in topological insulators enable the spin-momentum locking for the helical surface states. To date, however, there has been little report of direct electrical spin injection/detection in topological insulator. In this Letter, we report the electrical detection of spin-polarized surface states conduction using a Co/Al2O3 ferromagnetic tunneling contact in which the compound topological insulator (Bi0.53Sb0.47)2Te3 was used to achieve low bulk carrier density. Resistance (voltage) hysteresis with the amplitude up to about 10 Ω was observed when sweeping the magnetic field to change the relative orientation between the Co electrode magnetization and the spin polarization of surface states. The two resistance states were reversible by changing the electric current direction, affirming the spin-momentum locking in the topological surface states. Angle-dependent measurement was also performed to further confirm that the abrupt change in the voltage (resistance) was associated with the magnetization switching of the Co electrode. The spin voltage amplitude was quantitatively analyzed to yield an effective spin polarization of 1.02% for the surface states conduction in (Bi0.53Sb0.47)2Te3. Our results show a direct evidence of spin polarization in the topological surface states conduction. It might open up great opportunities to explore energy-efficient spintronic devices based on topological insulators.

Proximity induced high-temperature magnetic order in topological insulator--ferrimagnetic insulator heterostructure.

Introducing magnetic order in a topological insulator (TI) breaks time-reversal symmetry of the surface states and can thus yield a variety of interesting physics and promises for novel spintronic devices. To date, however, magnetic effects in TIs have been demonstrated only at temperatures far below those needed for practical applications. In this work, we study the magnetic properties of Bi2Se3 surface states (SS) in the proximity of a high Tc ferrimagnetic insulator (FMI), yttrium iron garnet (YIG or Y3Fe5O12). Proximity-induced butterfly and square-shaped magnetoresistance loops are observed by magneto-transport measurements with out-of-plane and in-plane fields, respectively, and can be correlated with the magnetization of the YIG substrate. More importantly, a magnetic signal from the Bi2Se3 up to 130 K is clearly observed by magneto-optical Kerr effect measurements. Our results demonstrate the proximity-induced TI magnetism at higher temperatures, an important step toward room-temperature application of TI-based spintronic devices.

Scale-invariant quantum anomalous Hall effect in magnetic topological insulators beyond the two-dimensional limit.

We investigate the quantum anomalous Hall effect (QAHE) and related chiral transport in the millimeter-size (Cr(0.12)Bi(0.26)Sb(0.62))2Te3 films. With high sample quality and robust magnetism at low temperatures, the quantized Hall conductance of e²/h is found to persist even when the film thickness is beyond the two-dimensional (2D) hybridization limit. Meanwhile, the Chern insulator-featured chiral edge conduction is manifested by the nonlocal transport measurements. In contrast to the 2D hybridized thin film, an additional weakly field-dependent longitudinal resistance is observed in the ten-quintuple-layer film, suggesting the influence of the film thickness on the dissipative edge channel in the QAHE regime. The extension of the QAHE into the three-dimensional thickness region addresses the universality of this quantum transport phenomenon and motivates the exploration of new QAHE phases with tunable Chern numbers. In addition, the observation of scale-invariant dissipationless chiral propagation on a macroscopic scale makes a major stride towards ideal low-power interconnect applications.

Superlattice of Fe(x)Ge(1-x) nanodots and nanolayers for spintronics application.

Fe(x)Ge(1-x) superlattices with two types of nanostructures, i.e. nanodots and nanolayers, were successfully fabricated using low-temperature molecular beam epitaxy. Transmission electron microscopy (TEM) characterization clearly shows that both the Fe(x)Ge(1-x) nanodots and nanolayers exhibit a lattice-coherent structure with the surrounding Ge matrix without any metallic precipitations or secondary phases. The magnetic measurement reveals the nature of superparamagnetism in Fe(x)Ge(1-x) nanodots, while showing the absence of superparamagnetism in Fe(x)Ge(1-x) nanolayers. Magnetotransport measurements show distinct magnetoresistance (MR) behavior, i.e. a negative to positive MR transition in Fe(x)Ge(1-x) nanodots and only positive MR in nanolayers, which could be due to a competition between the orbital MR and spin-dependent scatterings. Our results open a new growth strategy for engineering Fe(x)Ge(1-x) nanostructures to facilitate the development of Ge-based spintronics and magnetoelectronics devices.

Competing weak localization and weak antilocalization in ultrathin topological insulators.

We demonstrate evidence of a surface gap opening in topological insulator (TI) thin films of (Bi(0.57)Sb(0.43))(2)Te(3) below six quintuple layers through transport and scanning tunneling spectroscopy measurements. By effective tuning the Fermi level via gate-voltage control, we unveil a striking competition between weak localization and weak antilocalization at low magnetic fields in nonmagnetic ultrathin films, possibly owing to the change of the net Berry phase. Furthermore, when the Fermi level is swept into the surface gap of ultrathin samples, the overall unitary behaviors are revealed at higher magnetic fields, which are in contrast to the pure WAL signals obtained in thicker films. Our findings show an exotic phenomenon characterizing the gapped TI surface states and point to the future realization of quantum spin Hall effect and dissipationless TI-based applications.

Manipulating surface-related ferromagnetism in modulation-doped topological insulators.

A new class of devices based on topological insulators (TI) can be achieved by the direct engineering of the time-reversal-symmetry (TRS) protected surface states. In the meantime, a variety of interesting phenomena are also expected when additional ferromagnetism is introduced to the original topological order. In this Letter, we report the magnetic responses from the magnetically modulation-doped (Bi(z)Sb(1-z))2Te3/Cr(x)(Bi(y)Sb(1-y))2Te3 bilayer films. By electrically tuning the Fermi level across the Dirac point, we show that the top TI surface carriers can effectively mediate the magnetic impurities and generate robust ferromagnetic order. More importantly, such surface magneto-electric effects can be either enhanced or suppressed, depending on the magnetic interaction range inside the TI heterostructures. The manipulation of surface-related ferromagnetism realized in our modulation-doped TI device is important for the realization of TRS-breaking topological physics, and it may also lead to new applications of TI-based multifunctional heterostructures.

Direct imaging of thermally driven domain wall motion in magnetic insulators.

Thermally induced domain wall motion in a magnetic insulator was observed using spatiotemporally resolved polar magneto-optical Kerr effect microscopy. The following results were found: (i) the domain wall moves towards hot regime; (ii) a threshold temperature gradient (5 K/mm), i.e., a minimal temperature gradient required to induce domain wall motion; (iii) a finite domain wall velocity outside of the region with a temperature gradient, slowly decreasing as a function of distance, which is interpreted to result from the penetration of a magnonic current into the constant temperature region; and (iv) a linear dependence of the average domain wall velocity on temperature gradient, beyond a threshold thermal bias. Our observations can be qualitatively explained using a magnonic spin transfer torque mechanism, which suggests the utility of magnonic spin transfer torque for controlling magnetization dynamics.

Separation of top and bottom surface conduction in Bi2Te3 thin films.

Quantum spin Hall (QSH) systems are insulating in the bulk with gapless edges or surfaces that are topologically protected and immune to nonmagnetic impurities or geometric perturbations. Although the QSH effect has been realized in the HgTe/CdTe system, it has not been accomplished in normal 3D topological insulators. In this work, we demonstrate a separation of two surface conductions (top/bottom) in epitaxially grown Bi(2)Te(3) thin films through gate dependent Shubnikov-de Haas (SdH) oscillations. By sweeping the gate voltage, only the Fermi level of the top surface is tuned while that of the bottom surface remains unchanged due to strong electric field screening effects arising from the high dielectric constant of Bi(2)Te(3). In addition, the bulk conduction can be modulated from n- to p-type with a varying gate bias. Our results on the surface control hence pave a way for the realization of QSH effect in topological insulators which requires a selective control of spin transports on the top/bottom surfaces.

Surface-dominated conduction in a 6 nm thick Bi2Se3 thin film.

We report a direct observation of surface dominated conduction in an intrinsic Bi(2)Se(3) thin film with a thickness of six quintuple layers grown on lattice-matched CdS (0001) substrates by molecular beam epitaxy. Shubnikov-de Haas oscillations from the topological surface states suggest that the Fermi level falls inside the bulk band gap and is 53 ± 5 meV above the Dirac point, which is in agreement with 70 ± 20 meV obtained from scanning tunneling spectroscopies. Our results demonstrate a great potential of producing genuine topological insulator devices using Dirac Fermions of the surface states, when the film thickness is pushed to nanometer range.

Gate-controlled surface conduction in Na-doped Bi2Te3 topological insulator nanoplates.

Exploring exciting and exotic physics, scientists are pursuing practical device applications for topological insulators. The Dirac-like surface states in topological insulators are protected by the time-reversal symmetry, which naturally forbids backscattering events during the carrier transport process, and therefore offers promising applications in dissipationless spintronic devices. Although considerable efforts have been devoted to controlling their surface conduction, limited work has been focused on tuning surface states and bulk carriers in Bi(2)Te(3) nanostructures by external field. Here we report gate-tunable surface conduction in Na-doped Bi(2)Te(3) topological insulator nanoplates. Significantly, by applying external gate voltages, such topological insulators can be tuned from p-type to n-type. Our results render a promise in finding novel topological insulators with enhanced surface states.

Competing effect of spin-orbit torque terms on perpendicular magnetization switching in structures with multiple inversion asymmetries.

Current-induced spin-orbit torques (SOTs) in structurally asymmetric multilayers have been used to efficiently manipulate magnetization. In a structure with vertical symmetry breaking, a damping-like SOT can deterministically switch a perpendicular magnet, provided an in-plane magnetic field is applied. Recently, it has been further demonstrated that the in-plane magnetic field can be eliminated by introducing a new type of perpendicular field-like SOT via incorporating a lateral structural asymmetry into the device. Typically, however, when a current is applied to such devices with combined vertical and lateral asymmetries, both the perpendicular field-like torque and the damping-like torque coexist, hence jointly affecting the magnetization switching behavior. Here, we study perpendicular magnetization switching driven by the combination of the perpendicular field-like and the damping-like SOTs, which exhibits deterministic switching mediated through domain wall propagation. It is demonstrated that the role of the damping-like SOT in the deterministic switching is highly dependent on the magnetization direction in the domain wall. By contrast, the perpendicular field-like SOT is solely determined by the relative orientation between the lateral structural asymmetry and the current direction, regardless of the magnetization direction in the domain wall. The experimental results further the understanding of SOTs-induced switching, with implications for spintronic devices.

Electric-field control of spin-orbit torque in a magnetically doped topological insulator.

Electric-field manipulation of magnetic order has proved of both fundamental and technological importance in spintronic devices. So far, electric-field control of ferromagnetism, magnetization and magnetic anisotropy has been explored in various magnetic materials, but the efficient electric-field control of spin-orbit torque (SOT) still remains elusive. Here, we report the effective electric-field control of a giant SOT in a Cr-doped topological insulator (TI) thin film using a top-gate field-effect transistor structure. The SOT strength can be modulated by a factor of four within the accessible gate voltage range, and it shows strong correlation with the spin-polarized surface current in the film. Furthermore, we demonstrate the magnetization switching by scanning gate voltage with constant current and in-plane magnetic field applied in the film. The effective electric-field control of SOT and the giant spin-torque efficiency in Cr-doped TI may lead to the development of energy-efficient gate-controlled spin-torque devices compatible with modern field-effect semiconductor technologies.

Magneto-optical investigation of spin-orbit torques in metallic and insulating magnetic heterostructures.

Manipulating magnetism by electric current is of great interest for both fundamental and technological reasons. Much effort has been dedicated to spin-orbit torques (SOTs) in metallic structures, while quantitative investigation of analogous phenomena in magnetic insulators remains challenging due to their low electrical conductivity. Here we address this challenge by exploiting the interaction of light with magnetic order, to directly measure SOTs in both metallic and insulating structures. The equivalency of optical and transport measurements is established by investigating a heavy-metal/ferromagnetic-metal device (Ta/CoFeB/MgO). Subsequently, SOTs are measured optically in the contrasting case of a magnetic-insulator/heavy-metal (YIG/Pt) heterostructure, where analogous transport measurements are not viable. We observe a large anti-damping torque in the YIG/Pt system, revealing its promise for spintronic device applications. Moreover, our results demonstrate that SOT physics is directly accessible by optical means in a range of materials, where transport measurements may not be possible.

Switching of perpendicular magnetization by spin-orbit torques in the absence of external magnetic fields.

Magnetization switching by current-induced spin-orbit torques is of great interest due to its potential applications in ultralow-power memory and logic devices. The switching of ferromagnets with perpendicular magnetization is of particular technological relevance. However, in such materials, the presence of an in-plane external magnetic field is typically required to assist spin-orbit torque-driven switching and this is an obstacle for practical applications. Here, we report the switching of out-of-plane magnetized Ta/Co(20)Fe(60)B(20)/TaO(x) structures by spin-orbit torques driven by in-plane currents, without the need for any external magnetic fields. This is achieved by introducing a lateral structural asymmetry into our devices, which gives rise to a new field-like spin-orbit torque when in-plane current flows in these structures. The direction of the current-induced effective field corresponding to this field-like spin-orbit torque is out-of-plane, facilitating the switching of perpendicular magnets.

Interplay between different magnetisms in Cr-doped topological insulators.

Breaking the time-reversal-symmetry of topological insulators through magnetic doping has led to exotic physical discoveries. Here, we report the gate-dependent magneto-transport measurements on the Cr-doped (BixSb1-x)2Te3 thin films. With effective top-gate modulations, we demonstrate the presence of both the hole-mediated RKKY coupling and carrier-independent van Vleck magnetism in the magnetic TI systems. Most importantly, by varying the Cr doping concentrations from 2% to 20%, we unveil the interplay between the two magnetic orders and establish the valid approach to either enhance or suppress each individual contribution. The electric-field-controlled ferromagnetisms identified in the Cr-doped TI materials will serve as the fundamental step to further explore the TRS-breaking TI systems, and it may also help to expand the functionality of TI-based device for spintronics applications.

Evidence of the two surface states of (Bi0.53Sb0.47)2Te3 films grown by van der Waals epitaxy.

The discovery of topological insulators (TIs) has led to numerous exciting opportunities for studying topological states of quantum physics and for exploring spintronic applications due to the new physics arising from their robust metallic surface states. Here, we report the high-quality topological insulator (BixSb1-x)2Te3 thin films using a single van der Waals GaSe buffer layer. As a result, ultra-low surface carrier density of 1.3 × 10(12) cm(-2) and a high Hall mobility of 3100 cm(2)/Vs have been achieved for (Bi0.53Sb0.47)2Te3. The high-quality films enable us to observe quantum oscillations associated with the top and bottom surface states and to manipulate the Dirac electrons and bulk holes' conduction properties. The observation of the two surface states may lead to a path towards the implementation of TIs in spintronics.

Quantum capacitance in topological insulators.

Topological insulators show unique properties resulting from massless, Dirac-like surface states that are protected by time-reversal symmetry. Theory predicts that the surface states exhibit a quantum spin Hall effect with counter-propagating electrons carrying opposite spins in the absence of an external magnetic field. However, to date, the revelation of these states through conventional transport measurements remains a significant challenge owing to the predominance of bulk carriers. Here, we report on an experimental observation of Shubnikov-de Haas oscillations in quantum capacitance measurements, which originate from topological helical states. Unlike the traditional transport approach, the quantum capacitance measurements are remarkably alleviated from bulk interference at high excitation frequencies, thus enabling a distinction between the surface and bulk. We also demonstrate easy access to the surface states at relatively high temperatures up to 60 K. Our approach may eventually facilitate an exciting exploration of exotic topological properties at room temperature.

Revelation of topological surface states in Bi2Se3 thin films by in situ Al passivation.

Topological insulators (TIs) are extraordinary materials that possess massless, Dirac-like topological surface states in which backscattering is prohibited due to the strong spin-orbit coupling. However, there have been reports on degradation of topological surface states in ambient conditions, which presents a great challenge for probing the original topological surface states after TI materials are prepared. Here, we show that in situ Al passivation inside a molecular beam epitaxy (MBE) chamber could inhibit the degradation process and reveal the pristine topological surface states. Dual evidence from Shubnikov-de Hass (SdH) oscillations and weak antilocalization (WAL) effect, originated from the π Berry phase, suggests that the helically spin-polarized surface states are well preserved by the proposed in situ Al passivation. In contrast, we show the degradation of surface states for the unpassivated control samples, in which the 2D carrier density is increased 39.2% due to ambient n-doping, the SdH oscillations are completely absent, and a large deviation from WAL is observed.