Control of "blue carbon" storage by mangrove ageing: Evidence from a 66-year chronosequence in French Guiana.

The role of mangroves in the blue carbon stock is critical and requires special focus. Mangroves are carbon-rich forests that are not in steady-state equilibrium at the decadal time scale. Over the last decades, the structure and zonation of mangroves have been largely disturbed by coastal changes and land use conversions. The amount of time since the last disturbance is a key parameter determining forest structure, but it has so far been overlooked in mangrove carbon stock projections. In particular, the carbon sequestration rates among mangrove successional ages after (re)establishment are poorly quantified and not used in large-scale estimations of the blue carbon stock. Here, it is hypothesized that ecosystem age structure significantly modulates mangrove carbon stocks. We analysed a 66-year chronosequence of the aboveground and belowground biomass and soil carbon stock of mangroves in French Guiana, and we found that in the year after forest establishment on newly formed mud banks, the aboveground, belowground and soil carbon stocks averaged 23.56 ± 7.71, 13.04 ± 3.37 and 84.26 ± 64.14 (to a depth of 1 m) Mg C/ha, respectively. The mean annual increment (MAI) in the aboveground and belowground reservoirs was 23.56 × Age-0.52 and 13.20 × Age-0.64  Mg C ha-1  year-1 , respectively, and the MAI in the soil carbon reservoir was 3.00 ± 1.80 Mg C ha-1  year-1 . Our results show that the plant carbon sink capacity declines with ecosystem age, while the soil carbon sequestration rate remains constant over many years. We suggest that global projections of the above- and belowground reservoirs of the carbon stock need to account for mangrove age structures, which result from historical changes in coastal morphology. Our work anticipates joint international efforts to globally quantify the multidecadal mangrove carbon balance based on the combined use of age-based parametric equations and time series of mangrove age maps at regional scales.

Surface Area of Carbon Nanoparticles: A Dose Metric for a More Realistic Ecotoxicological Assessment.

Engineered nanoparticles such as graphenes, nanodiamonds, and carbon nanotubes correspond to different allotropes of carbon and are among the best candidates for applications in fast-growing nanotechnology. It is thus likely that they may get into the environment at each step of their life cycle: production, use, and disposal. The aquatic compartment concentrates pollutants and is expected to be especially impacted. The toxicity of a compound is conventionally evaluated using mass concentration as a quantitative measure of exposure. However, several studies have highlighted that such a metric is not the best descriptor at the nanoscale. Here we compare the inhibition of Xenopus laevis larvae growth after in vivo exposure to different carbon nanoparticles for 12 days using different dose metrics and clearly show that surface area is the most relevant descriptor of toxicity for different types of carbon allotropes.

Bioaccessibility of selenium after human ingestion in relation to its chemical species and compartmentalization in maize.

Selenium is a micronutrient needed by all living organisms including humans, but often present in low concentration in food with possible deficiency. From another side, at higher concentrations in soils as observed in seleniferous regions of the world, and in function of its chemical species, Se can also induce (eco)toxicity. Root Se uptake was therefore studied in function of its initial form for maize (Zea mays L.), a plant widely cultivated for human and animal food over the world. Se phytotoxicity and compartmentalization were studied in different aerial plant tissues. For the first time, Se oral human bioaccessibility after ingestion was assessed for the main Se species (Se(IV) and Se(VI)) with the BARGE ex vivo test in maize seeds (consumed by humans), and in stems and leaves consumed by animals. Corn seedlings were cultivated in hydroponic conditions supplemented with 1 mg L(-1) of selenium (Se(IV), Se(VI), Control) for 4 months. Biomass, Se concentration, and bioaccessibility were measured on harvested plants. A reduction in plant biomass was observed under Se treatments compared to control, suggesting its phytotoxicity. This plant biomass reduction was higher for selenite species than selenate, and seed was the main affected compartment compared to control. Selenium compartmentalization study showed that for selenate species, a preferential accumulation was observed in leaves, whereas selenite translocation was very limited toward maize aerial parts, except in the seeds where selenite concentrations are generally high. Selenium oral bioaccessibility after ingestion fluctuated from 49 to 89 % according to the considered plant tissue and Se species. Whatever the tissue, selenate appeared as the most human bioaccessible form. A potential Se toxicity was highlighted for people living in seleniferous regions, this risk being enhanced by the high Se bioaccessibility.

Measurement of metal bioaccessibility in vegetables to improve human exposure assessments: field study of soil-plant-atmosphere transfers in urban areas, South China.

The quality of cultivated consumed vegetables in relation to environmental pollution is a crucial issue for urban and peri-urban areas, which host the majority of people at the global scale. In order to evaluate the fate of metals in urban soil-plant-atmosphere systems and their consequences on human exposure, a field study was conducted at two different sites near a waste incinerator (site A) and a highway (site B). Metal concentrations were measured in the soil, settled atmospheric particulate matter (PM) and vegetables. A risk assessment was performed using both total and bioaccessible metal concentrations in vegetables. Total metal concentrations in PM were (mg kg-1): (site A) 417 Cr, 354 Cu, 931 Zn, 6.3 Cd and 168 Pb; (site B) 145 Cr, 444 Cu, 3289 Zn, 2.9 Cd and 396 Pb. Several total soil Cd and Pb concentrations exceeded China's Environmental Quality Standards. At both sites, there was significant metal enrichment from the atmosphere to the leafy vegetables (correlation between Pb concentrations in PM and leaves: r = 0.52, p < 0.05) which depended on the plant species. Total Cr, Cd and Pb concentrations in vegetables were therefore above or just under the maximum limit levels for foodstuffs according to Chinese and European Commission regulations. High metal bioaccessibility in the vegetables (60-79 %, with maximum value for Cd) was also observed. The bioaccessible hazard index was only above 1 for site B, due to moderate Pb and Cd pollution from the highway. In contrast, site A was considered as relatively safe for urban agriculture.

Short term exposure to multi-walled carbon nanotubes induce oxidative stress and DNA damage in Xenopus laevis tadpoles.

The potential impact of Multiwalled Carbon NanoTubes (MWCNTs) was investigated on Xenopus laevis tadpoles exposed to 0.1, 1 and 10mg/L. Oxidative stress was measured in entire larvae exposed and DNA damage (Comet assay) was carried out in erythrocytes of circulating blood from 2h to 24h according to standardized recommendations. Results showed significant H2O2 production when larvae were exposed to 1mg/L and 10mg/L of MWCNTs after 4h and 2h of exposure, respectively. Antioxidant enzyme activities showed significant induction of catalase (CAT), glutathione reductase (GR) and superoxide dismutase (SOD) from only 2h of exposure to 10mg/L of MWCNTs. In presence of 1mg/L of MWCNTs, only GR and CAT activities were significantly induced at 4h. Enzyme activities do not follow a simple dose-effect relation, but the time of induction is shortened in relation with the tested concentration. The Comet assay results showed significant DNA damages with a dose dependent response. The profiles of DNA damages show fluctuations, in course of time, which are characteristics of oxidative stress response in relation with the continuous balance between damage and compensation process.

Bayesian three-dimensional reconstruction of toothed whale trajectories: passive acoustics assisted with visual and tagging measurements.

The author describes and evaluates a Bayesian method to reconstruct three-dimensional toothed whale trajectories from a series of echolocation signals. Localization by using passive acoustic data (time of arrival of source signals at receptors) is assisted by using visual data (coordinates of the whale when diving and resurfacing) and tag information (movement statistics). The efficiency of the Bayesian method is compared to the standard minimum mean squared error statistical approach by comparing the reconstruction results of 48 simulated sperm whale (Physeter macrocephalus) trajectories. The use of the advanced Bayesian method reduces bias (standard deviation) with respect to the standard method up to a factor of 8.9 (13.6). The author provides open-source software which is functional with acoustic data which would be collected in the field from any three-dimensional receptor array design. This approach renews passive acoustics as a valuable tool to study the underwater behavior of toothed whales.

A length-based hierarchical model of brown trout (Salmo trutta fario) growth and production.

We present a hierarchical Bayesian model (HBM) to estimate the growth parameters, production, and production over biomass ratio (P/B) of resident brown trout (Salmo trutta fario) populations. The data which are required to run the model are removal sampling and air temperature data which are conveniently gathered by freshwater biologists. The model is the combination of eight submodels: abundance, weight, biomass, growth, growth rate, time of emergence, water temperature, and production. Abundance is modeled as a mixture of Gaussian cohorts; cohorts centers and standard deviations are related by a von Bertalanffy growth function; time of emergence and growth rate are functions of water temperature; water temperature is predicted from air temperature; biomass, production, and P/B are subsequently computed. We illustrate the capabilities of the model by investigating the growth and production of a brown trout population (Neste d'Oueil, Pyrénées, France) by using data collected in the field from 2005 to 2010.

A hierarchical model to estimate fish abundance in alpine streams by using removal sampling data from multiple locations.

The author compares 12 hierarchical models in the aim of estimating the abundance of fish in alpine streams by using removal sampling data collected at multiple locations. The most expanded model accounts for (i) variability of the abundance among locations, (ii) variability of the catchability among locations, and (iii) residual variability of the catchability among fish. Eleven model reductions are considered depending which variability is included in the model. The more restrictive model considers none of the aforementioned variabilities. Computations of the latter model can be achieved by using the algorithm presented by Carle and Strub (Biometrics 1978, 34, 621-630). Maximum a posteriori and interval estimates of the parameters as well as the Akaike and the Bayesian information criterions of model fit are computed by using samples simulated by a Markov chain Monte Carlo method. The models are compared by using a trout (Salmo trutta fario) parr (0+) removal sampling data set collected at three locations in the Pyrénées mountain range (Haute-Garonne, France) in July 2006. Results suggest that, in this case study, variability of the catchability is not significant, either among fish or locations. Variability of the abundance among locations is significant. 95% interval estimates of the abundances at the three locations are [0.15, 0.24], [0.26, 0.36], and [0.45, 0.58] parrs per m(2). Such differences are likely the consequence of habitat variability.

Herbicide accumulation and evolution in reservoir sediments.

The aim of the present study was to understand the effect of reservoir configurations on sediment pesticide fate. Two dams were selected on the River Garonne, in southwest France: Carbonne and Golfech, both with reservoirs subject to accumulation of herbicide-contaminated sediment. They are situated upstream and downstream respectively of an agricultural and urban area: the Mid-Garonne. The results presented include pesticide concentrations and C/N ratios in the smaller sediment particles (<2 mm) and values of oxygenation and herbicide concentrations in the water. The dynamic behaviour of sediment in the reservoirs is discussed. The present study shows that the theoretical lifespan (weak remanence in vitro) and the results actually observed in the sediment are conflicting. Pesticide contamination in Carbonne indicates conservation, even accumulation, of herbicide molecules while in Golfech transformation processes clearly dominate. The hydromorphological position of Golfech reservoir, i.e. located at the junction of two rivers with contrasting hydrological regimes and very different oxygenation conditions, leads to accelerated pesticide desorption or degradation. Unfortunately, this configuration is rare.

Soil chemistry and meteorological conditions influence the elemental profiles of West European wines.

Elemental profiles of wines have been used successfully to distinguish their geographical provenience around the world; however, underlying mechanisms are poorly understood. In this study, Ba, Ca, Mg, Mn and Sr contents were determined in 215 wines from several West European wine-growing areas using an easy-to-perform analysis based on ICP-OES. Major environmental and wine-making parameters (soil type as "calcareous" or not, rainfall, temperature and wine color) were used to explain variations within the dataset. The combined effects of wine-making processes (expressed by wine color) and soil type explained 28.5% of total variance. The effect of climatic conditions explained 24.1% of variance and could be interpreted as intensity of drought stress. Finally, carbonate occurrence in soils and climatic conditions systematically influenced the elemental composition of the wines. These findings provide insights into the mechanisms underlying elemental fingerprinting and allow prediction of which wine-growing regions can easily be distinguished based on elemental profiles as a marker of the terroir in viticulture.

Natural transformation of chlordecone into 5b-hydrochlordecone in French West Indies soils: statistical evidence for investigating long-term persistence of organic pollutants.

Chlordecone (CLD) was an organochlorine insecticide whose previous use resulted in an extensive pollution of the environment with severe health effects and social consequences. A closely related compound, 5b-hydrochlordecone (5b-hydroCLD), has been searched for and often detected in environmental matrices from the geographical area where CLD was applied. The current consensus considered that its presence was not the result of a biotic or abiotic dechlorination of CLD in these matrices but rather the consequence of its presence as impurity (synthesis by-product) in the CLD released into the environment. The aim of the present study was to determine if and to what extent degradation of CLD into 5b-hydroCLD occurred in the field. To test this hypothesis, the ratios of 5b-hydroCLD and CLD concentrations in a dataset of 810 soils collected between 2006 and 2012 in Martinique were compared to the ratios measured in 3 samples of the CLD dust commercial formulations applied in the banana fields of French West Indies (FWI) and 1 sample of the technical-grade CLD corresponding to the active ingredient used in such formulations. Soil data were processed with a hierarchical Bayesian model to account for random measurement errors and data censoring. Any pathway of CLD transformation into 5b-hydroCLD occurring over the long term in FWI soils would indeed change the ratio of 5b-hydroCLD/CLD compared to what it was in the initially applied formulations. Results showed a significant increase of the 5b-hydroCLD/CLD ratio in the soils-25 times greater in soil than in commercial formulations-which suggested that natural CLD transformation into 5b-hydroCLD over the long term occurred in these soils. Results from this study may impact future decisions for the remediation of the polluted areas.

Influence of fine process particles enriched with metals and metalloids on Lactuca sativa L. leaf fatty acid composition following air and/or soil-plant field exposure.

We investigate the effect of both foliar and root uptake of a mixture of metal(loid)s on the fatty acid composition of plant leaves. Our objectives are to determine whether both contamination pathways have a similar effect and whether they interact. Lactuca sativa L. were exposed to fine process particles enriched with metal(loid)s in an industrial area. Data from a first experiment were used to conduct an exploratory statistical analysis which findings were successfully cross-validated by using the data from a second one. Both foliar and root pathways impact plant leaf fatty acid composition and do not interact. Z index (dimensionless quantity), weighted product of fatty acid concentration ratios was built up from the statistical analyses. It provides new insights on the mechanisms involved in metal uptake and phytotoxicity. Plant leaf fatty acid composition is a robust and fruitful approach to detect and understand the effects of metal(loid) contamination on plants.

A Bayesian method to estimate the depth and the range of phonating sperm whales using a single hydrophone.

Some bioacousticians have used a single hydrophone to calculate the depth/range of phonating diving animals. The standard one-hydrophone localization method uses multipath transmissions (direct path, sea surface, and seafloor reflections) of the animal phonations as a substitute for a vertical hydrophone array. The standard method requires three multipath transmissions per phonation. Bioacousticians who study foraging sperm whales usually do not have the required amount of multipath transmissions. However, they usually detect accurately (using shallow hydrophones towed by research vessels) direct path transmissions and sea surface reflections of sperm whale phonations (clicks). Sperm whales emit a few thousand clicks per foraging dive, therefore researchers have this number of direct path transmissions and this number of sea surface reflections per dive. The author describes a Bayesian method to combine the information contained in those acoustic data plus visual observations. The author's tests using synthetic data show that the accurate estimation of the depth/range of sperm whales is possible using a single hydrophone and without using any seafloor reflections. This method could be used to study the behavior of sperm whales using a single hydrophone in any location no matter what the depth, the relief, or the constitution of the seafloor might be.

Measuring the off-axis angle and the rotational movements of phonating sperm whales using a single hydrophone.

The common use of the bent-horn model of the sperm whale sound generator describes sperm whale clicks as the pulse series {p0, p1, p2, p3,...}. Clicks, however, deviate from this standard when recorded using off-axis hydrophones. The existence of additional pulses within the {p0, p1, p2, p3, ...} series can be explained still using the bent-horn model. Multiple reflections on the whale's frontal and distal sacs of the p0 pulse lead to additional sets of pulses detectable using a farfield, off-axis hydrophone. The travel times of some of these additional pulses depend on the whale's orientation. The authors propose a method to estimate the off-axis angle of sperm whale clicks. They also propose a method to determine the nature of the movement (if it is pitch, yaw, or roll) of phonating sperm whales. The application of both methods requires the measurement of the travel time differences between pulses composing a sperm whale click. They lead, using a simple apparatus consisting of a single hydrophone at an unknown depth, to new measurements of the underwater movements of sperm whales. Using these methods shows that sperm whales would methodically scan seawater while searching for prey, by making periodic pitch and yaw movements in sync with their acoustic activity.

Male sperm whale acoustic behavior observed from multipaths at a single hydrophone.

Sperm whales generate transient sounds (clicks) when foraging. These clicks have been described as echolocation sounds, a result of having measured the source level and the directionality of these signals and having extrapolated results from biosonar tests made on some small odontocetes. The authors propose a passive acoustic technique requiring only one hydrophone to investigate the acoustic behavior of free-ranging sperm whales. They estimate whale pitch angles from the multipath distribution of click energy. They emphasize the close bond between the sperm whale's physical and acoustic activity, leading to the hypothesis that sperm whales might, like some small odontocetes, control click level and rhythm. An echolocation model estimating the range of the sperm whale's targets from the interclick interval is computed and tested during different stages of the whale's dive. Such a hypothesis on the echolocation process would indicate that sperm whales echolocate their prey layer when initiating their dives and follow a methodic technique when foraging.