Impact of iodide ions on the speciation of radiolytic transients in molten LiCl-KCl eutectic salt mixtures.

The fate of fission-product iodine is critical for the deployment of next generation molten salt reactor technologies, owing to its volatility and biological impacts if it were to be released into the environment. To date, little is known on how ionizing radiation fields influence the redox chemistry, speciation, and transport of iodine in high temperature molten salts. Here we employ picosecond electron pulse irradiation techniques to elucidate for the first time the impact of iodide ions (I-) on the speciation and chemical kinetics of the primary radiation-induced transient radicals generated in molten chloride salt mixtures (eS- and Cl2˙-) as a function of temperature (400-700 °C). In the presence of I- ions (≥ 1 wt% KI in LiCl-KCl eutectic), we find that the transient spectrum following the electron pulse is composed of at least three overlapping species: the eS- and the Cl2˙- and ICl˙- radical anions, for which a deconvoluted spectrum of the latter is reported here for the first time in molten salts. This new transient spectrum was consistent with gas phase density functional theory calculations. The lifetime of the eS- was unaffected by the addition of I- ions. The newly observed interhalogen radical anion, ICl˙-, exhibited a lifetime on the order of microseconds over the investigated temperature range. The associated chemical kinetics indicate that the predominate mechanism of ICl˙- decay is via reaction with the Cl2˙- radical anion. The iodine containing product of this reaction is expected to be ICl2-, which will have implications for the transport of fission-product iodine in MSR technologies.

Transient Radiation-Induced Berkelium(III) and Californium(III) Redox Chemistry in Aqueous Solution.

Despite the significant impact of radiation-induced redox reactions on the accessibility and lifetimes of actinide oxidation states, fundamental knowledge of aqueous actinide metal ion radiation chemistry is limited, especially for the late actinides. A quantitative understanding of these intrinsic radiation-induced processes is essential for investigating the fundamental properties of these actinides. We present here a picosecond electron pulse reaction kinetics study into the radiation-induced redox chemistry of trivalent berkelium (Bk(III)) and californium (Cf(III)) ions in acidic aqueous solutions at ambient temperature. New and first-of-a-kind, second-order rate coefficients are reported for the transient radical-induced reduction of Bk(III) and Cf(III) by the hydrated electron (eaq-) and hydrogen atom (H•), demonstrating a significant reactivity (up to 1011 M-1 s-1) indicative of a preference of these metals to adopt divalent states. Additionally, we report the first-ever second-order rate coefficients for the transient radical-induced oxidation of these elements by a reaction with hydroxyl (•OH) and nitrate (NO3•) radicals, which also exhibited fast reactivity (ca. 108 M-1 s-1). Transient Cf(II), Cf(IV), and Bk(IV) absorption spectra are also reported. Overall, the presented data highlight the existence of rich, complex, intrinsic late actinide radiation-induced redox chemistry that has the potential to influence the findings of other areas of actinide science.

Radiation-induced reaction kinetics of Zn2+ with eS- and Cl2˙- in Molten LiCl-KCl eutectic at 400-600 °C.

Molten chloride salts are currently under consideration as combined coolant and liquid fuel for next-generation molten salt nuclear reactors. Unlike complementary light-water reactor technologies, the radiation science underpinning molten salts is in its infancy, and thus requires a fundamental mechanistic investigation to elucidate the radiation-driven chemistry within molten salt reactors. Here we present an electron pulse radiolysis kinetics study into the behaviour of the primary radiolytic species generated in molten chloride systems, i.e., the solvated electron (eS-) and di-chlorine radical anion (Cl2˙-). We examine the reaction of eS- with Zn2+ from 400-600 °C (Ea = 30.31 ± 0.09 kJ mol-1), and the kinetics and decay mechanisms of Cl2˙- in molten lithium chloride-potassium chloride (LiCl-KCl) eutectic. In the absence of Zn2+, the lifetime of eS- was found to be dictated by residual impurities in ostensibly "pure" salts, and thus the observed decay is dependent on sample history rather than being an intrinsic property of the salt. The decay of Cl2˙- is complex, owing to the competition of Cl2˙- disproportionation with several other chemical pathways, one of which involves reduction by radiolytically-produced Zn+ species. Overall, the reported findings demonstrate the richness and complexity of chemistry involving the interactions of ionizing radiation with molten salts.

Versatile compact heater design for in situ nano-tomography by transmission X-ray microscopy.

A versatile, compact heater designed at National Synchrotron Light Source-II for in situ X-ray nano-imaging in a full-field transmission X-ray microscope is presented. Heater design for nano-imaging is challenging, combining tight spatial constraints with stringent design requirements for the temperature range and stability. Finite-element modeling and analytical calculations were used to determine the heater design parameters. Performance tests demonstrated reliable and stable performance, including maintaining the exterior casing close to room temperature while the heater is operating at above 1100°C, a homogenous heating zone and small temperature fluctuations. Two scientific experiments are presented to demonstrate the heater capabilities: (i) in situ 3D nano-tomography including a study of metal dealloying in a liquid molten salt extreme environment, and (ii) a study of pore formation in icosahedral quasicrystals. The progression of structural changes in both studies were clearly resolved in 3D, showing that the new heater enables powerful capabilities to directly visualize and quantify 3D morphological evolution of materials under real conditions by X-ray nano-imaging at elevated temperature during synthesis, fabrication and operation processes. This heater design concept can be applied to other applications where a precise, compact heater design is required.

Structure and dynamics of the molten alkali-chloride salts from an X-ray, simulation, and rate theory perspective.

Molten salts are of great interest as alternative solvents, electrolytes, and heat transfer fluids in many emerging technologies. The macroscopic properties of molten salts are ultimately controlled by their structure and ion dynamics at the microscopic level and it is therefore vital to develop an understanding of these at the atomistic scale. Herein, we present high-energy X-ray scattering experiments combined with classical and ab initio molecular dynamics simulations to elucidate structural and dynamical correlations across the family of alkali-chlorides. Computed structure functions and transport properties are in reasonably good agreement with experiments providing confidence in our analysis of microscopic properties based on simulations. For these systems, we also survey different rate theory models of anion exchange dynamics in order to gain a more sophisticated understanding of the short-time correlations that are likely to influence transport properties such as conductivity. The anion exchange process occurs on the picoseconds time scale at 1100 K and the rate increases in the order KCl < NaCl < LiCl, which is in stark contrast to the ion pair dissociation trend in aqueous solutions. Consistent with the trend we observe for conductivity, the cationic size/mass, as well as other factors specific to each type of rate theory, appear to play important roles in the anion exchange rate trend.

Mechanism of the formation of a Mn-based CO2 reduction catalyst revealed by pulse radiolysis with time-resolved infrared detection.

Using a new technique, which combines pulse radiolysis with nanosecond time-resolved infrared (TRIR) spectroscopy in the condensed phase, we have conducted a detailed kinetic and mechanistic investigation of the formation of a Mn-based CO2 reduction electrocatalyst, [Mn((t)Bu2-bpy)(CO)3]2 ((t)Bu2-bpy = 4,4'-(t)Bu2-2,2'-bipyridine), in acetonitrile. The use of TRIR allowed, for the first time, direct observation of all the intermediates involved in this process. Addition of excess [(n)Bu4N][HCO2] to an acetonitrile solution of fac-MnBr((t)Bu2-bpy)(CO)3 results in its quantitative conversion to the Mn-formate complex, fac-Mn(OCHO)((t)Bu2-bpy)(CO)3, which is a precatalyst for the electrocatalytic reduction of CO2. Formation of the catalyst is initiated by one-electron reduction of the Mn-formate precatalyst, which produces the bpy ligand-based radical. This radical undergoes extremely rapid (τ = 77 ns) formate dissociation accompanied by a free valence shift to yield the five-coordinate Mn-based radical, Mn(•)((t)Bu2-bpy)(CO)3. TRIR data also provide evidence that the Mn-centered radical does not bind acetonitrile prior to its dimerization. This reaction occurs with a characteristically high radical-radical recombination rate (2kdim = (1.3 ± 0.1) × 10(9) M(-1) s(-1)), generating the catalytically active Mn-Mn bound dimer.

Generation and study of Am(IV) by temperature-controlled electron pulse radiolysis.

First-of-a-kind temperature-controlled electron pulse radiolysis experiments facilitated the radiation-induced formation of Am(IV) in concentrated (6.0 M) HNO3, and enabled the derivation of Arrhenius and Eyring activation parameters for instigating the radical reaction between NO3˙ and Am(III).

Coupling Pulse Radiolysis with Nanosecond Time-Resolved Step-Scan Fourier Transform Infrared Spectroscopy: Broadband Mid-Infrared Detection of Radiolytically Generated Transients.

We describe the first implementation of broadband, nanosecond time-resolved step-scan Fourier transform infrared (S2-FT-IR) spectroscopy at a pulse radiolysis facility. This new technique allows the rapid acquisition of nano- to microsecond time-resolved infrared (TRIR) spectra of transient species generated by pulse radiolysis of liquid samples at a pulsed electron accelerator. Wide regions of the mid-infrared can be probed in a single experiment, which often takes < 20-30 min to complete. It is therefore a powerful method for rapidly locating the IR absorptions of short-lived, radiation-induced species in solution, and for directly monitoring their subsequent reactions. Time-resolved step-scan FT-IR detection for pulse radiolysis thus complements our existing narrowband quantum cascade laser-based pulse radiolysis-TRIR detection system, which is more suitable for acquiring single-shot kinetics and narrowband TRIR spectra on small-volume samples and in strongly absorbing solvents, such as water. We have demonstrated the application of time-resolved step-scan FT-IR spectroscopy to pulse radiolysis by probing the metal carbonyl and organic carbonyl vibrations of the one-electron-reduced forms of two Re-based CO2 reduction catalysts in acetonitrile solution. Transient IR absorption bands with amplitudes on the order of 1 × 10-3 are easily detected on the sub-microsecond timescale using electron pulses as short as 250 ns.

Evolution of micro-pores in Ni-Cr alloys via molten salt dealloying.

Porous materials with high specific surface area, high porosity, and high electrical conductivity are promising materials for functional applications, including catalysis, sensing, and energy storage. Molten salt dealloying was recently demonstrated in microwires as an alternative method to fabricate porous structures. The method takes advantage of the selective dissolution process introduced by impurities often observed in molten salt corrosion. This work further investigates molten salt dealloying in bulk Ni-20Cr alloy in both KCl-MgCl2 and KCl-NaCl salts at 700 â„ƒ, using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction (XRD), as well as synchrotron X-ray nano-tomography. Micro-sized pores with irregular shapes and sizes ranging from sub-micron to several microns and ligaments formed during the process, while the molten salt dealloying was found to progress several microns into the bulk materials within 1-16 h, a relatively short reaction time, enhancing the practicality of using the method for synthesis. The ligament size increased from ~ 0.7 µm to ~ 1.3 µm in KCl-MgCl2 from 1 to 16 h due to coarsening, while remaining ~ 0.4 µm in KCl-NaCl during 16 h of exposure. The XRD analysis shows that the corrosion occurred primarily near the surface of the bulk sample, and Cr2O3 was identified as a corrosion product when the reaction was conducted in an air environment (controlled amount sealed in capillaries); thus surface oxides are likely to slow the morphological coarsening rate by hindering the surface diffusion in the dealloyed structure. 3D-connected pores and grain boundary corrosion were visualized by synchrotron X-ray nano-tomography. This study provides insights into the morphological and chemical evolution of molten salt dealloying in bulk materials, with a connection to molten salt corrosion concerns in the design of next-generation nuclear and solar energy power plants.

Formation of three-dimensional bicontinuous structures via molten salt dealloying studied in real-time by in situ synchrotron X-ray nano-tomography.

Three-dimensional bicontinuous porous materials formed by dealloying contribute significantly to various applications including catalysis, sensor development and energy storage. This work studies a method of molten salt dealloying via real-time in situ synchrotron three-dimensional X-ray nano-tomography. Quantification of morphological parameters determined that long-range diffusion is the rate-determining step for the dealloying process. The subsequent coarsening rate was primarily surface diffusion controlled, with Rayleigh instability leading to ligament pinch-off and creating isolated bubbles in ligaments, while bulk diffusion leads to a slight densification. Chemical environments characterized by X-ray absorption near edge structure spectroscopic imaging show that molten salt dealloying prevents surface oxidation of the metal. In this work, gaining a fundamental mechanistic understanding of the molten salt dealloying process in forming porous structures provides a nontoxic, tunable dealloying technique and has important implications for molten salt corrosion processes, which is one of the major challenges in molten salt reactors and concentrated solar power plants.

Design and performance of high-temperature furnace and cell holder for in situ spectroscopic, electrochemical, and radiolytic investigations of molten salts.

To facilitate the development of molten salt reactor technologies, a fundamental understanding of the physical and chemical properties of molten salts under the combined conditions of high temperature and intense radiation fields is necessary. Optical spectroscopic (UV-Vis-near IR) and electrochemical techniques are powerful analytical tools to probe molecular structure, speciation, thermodynamics, and kinetics of solution dynamics. Here, we report the design and fabrication of three custom-made apparatus: (i) a multi-port spectroelectrochemical furnace equipped with optical spectroscopic and electrochemical instrumentation, (ii) a high-temperature cell holder for time-resolved optical detection of radiolytic transients in molten salts, and (iii) a miniaturized spectroscopy furnace for the investigation of steady-state electron beam effects on molten salt speciation and composition by optical spectroscopy. Initial results obtained with the spectroelectrochemical furnace (i) and high-temperature cell holder (ii) are reported.

Connections between the Speciation and Solubility of Ni(II) and Co(II) in Molten ZnCl2.

Understanding the factors that control solubility and speciation of metal ions in molten salts is key for their successful use in molten salt reactors and electrorefining. Here, we employ X-ray and optical absorption spectroscopies and molecular dynamics simulations to investigate the coordination environment of Ni(II) in molten ZnCl2, where it is poorly soluble, and contrast it with highly soluble Co(II) over a wide temperature range. In solid NiCl2, the Ni ion is octahedrally coordinated, whereas the ZnCl2 host matrix favors tetrahedral coordination. Our experimental and computational results show that the coordination environment of Ni(II) in ZnCl2 is disordered among tetra- and pentacoordinate states. In contrast, the local structure of dissolved Co(II) is tetrahedral and commensurate with the ZnCl2 host's structure. The heterogeneity and concomitant large bond length disorder in the Ni case constitute a plausible explanation for its lower solubility in molten ZnCl2.

Elucidating Ionic Correlations Beyond Simple Charge Alternation in Molten MgCl2-KCl Mixtures.

The development of technologies for nuclear reactors based on molten salts has seen a big resurgence. The success of thermodynamic models for these hinges in part on our ability to predict at the atomistic level the behavior of pure salts and their mixtures under a range of conditions. In this letter, we present high-energy X-ray scattering experiments and molecular dynamics simulations that describe the molten structure of mixtures of MgCl2 and KCl. As one would expect, KCl is a prototypical salt in which structure is governed by simple charge alternation. In contrast, MgCl2 and its mixtures with KCl display more complex correlations including intermediate-range order and the formation of Cl--decorated Mg2+ chains. A thorough computational analysis suggests that intermediate-range order beyond charge alternation may be traced to correlations between these chains. An analysis of the coordination structure for Mg2+ ions paints a more complex picture than previously understood, with multiple accessible states of distinct geometries.

Development of nanosecond time-resolved infrared detection at the LEAF pulse radiolysis facility.

When coupled with transient absorption spectroscopy, pulse radiolysis, which utilizes high-energy electron pulses from an accelerator, is a powerful tool for investigating the kinetics and thermodynamics of a wide range of radiation-induced redox and electron transfer processes. The majority of these investigations detect transient species in the UV, visible, or near-IR spectral regions. Unfortunately, the often-broad and featureless absorption bands in these regions can make the definitive identification of intermediates difficult. Time-resolved vibrational spectroscopy would offer much improved structural characterization, but has received only limited application in pulse radiolysis. In this paper, we describe in detail the development of a unique nanosecond time-resolved infrared (TRIR) detection capability for condensed-phase pulse radiolysis on a new beam line at the LEAF facility of Brookhaven National Laboratory. The system makes use of a suite of high-power, continuous wave external-cavity quantum cascade lasers as the IR probe source, with coverage from 2330 to 1051 cm(-1). The response time of the TRIR detection setup is ∼40 ns, with a typical sensitivity of ∼100 µOD after 4-8 signal averages using a dual-beam probe/reference normalization detection scheme. This new detection method has enabled mechanistic investigations of a range of radiation-induced chemical processes, some of which are highlighted here.

Beam action spectroscopy via inelastic scattering.

In this article, a new technique we call Beam Action Spectroscopy via Inelastic Scattering (BASIS) is demonstrated. BASIS takes advantage of the sensitivity of rotational state distributions in a supersonic molecular beam to inelastic scattering within the beam. We exploit BASIS to achieve increased sensitivity in two very different types of experiments. In the first, the UV photodissociation spectrum of OClO is recovered by monitoring intensity changes in the pure rotational transition of a spectator molecule (OCS) downstream from the nozzle, revealing a new vibrational structure in the region between 30,000 and 36,000 cm(-1). In the second, the mid-IR vibrational spectrum of acetylene is recorded simply by monitoring a single pure rotational transition of OCS co-expanded with acetylene. The technique may prove particularly fruitful when an excitation process produces product dark states that are not easily probed by conventional spectroscopy.