Assuntos
Nariz/fisiopatologia , Nariz/cirurgia , Rinoplastia , Feminino , Humanos , Lipoma/diagnóstico , Lipoma/cirurgia , Pessoa de Meia-IdadeRESUMO
Concomitant maxillofacial, laryngeal and cervical spine injuries may occur after high-energy accidents. Although this presentation is uncommon, the multiple injuries may compromise airway, breathing, circulation, and neurologic function. We identified 8 adult trauma patients admitted to the National University Hospital with the concomitant injuries. We reviewed the patient data and existing literature to identify the important factors that must be considered for management. Seven resulted from high velocity accidents, whereas 1 was assaulted. An algorithm that prioritizes in-tandem diagnosis and acute management of the adult trauma patient with maxillofacial, laryngeal, and cervical spine trauma was developed. The first priority is to assess airway, breathing, and circulation with cervical spine immobilization. Early diagnosis of patients with severe laryngeal injury, confirmation by video endoscopy, and establishing a surgical airway prevents airway obstruction or even a laryngotracheal dissociation. Urgent computed tomography scans of the head and neck are essential for definitive diagnosis and surgical planning for the 3 injuries. Prudent sequencing of surgery is important to avoid complications and to achieve better functional outcomes.
Assuntos
Algoritmos , Vértebras Cervicais/lesões , Tomada de Decisão Clínica/métodos , Laringe/lesões , Traumatismos Maxilofaciais/terapia , Traumatismo Múltiplo/terapia , Traumatismos da Coluna Vertebral/terapia , Técnicas de Apoio para a Decisão , Diagnóstico Precoce , Humanos , Masculino , Traumatismos Maxilofaciais/diagnóstico , Pessoa de Meia-Idade , Traumatismo Múltiplo/diagnóstico , Traumatismos da Coluna Vertebral/diagnósticoRESUMO
Background The posterior ledge (PL) is a vital structure that supports the implant posteriorly during orbital floor reconstruction. This study describes a technique for mapping the PL in relation to the infraorbital margin (IM) in patients with orbital floor blowout fractures. This study establishes the location of the optic foramen in relation to the PL. Methods Facial computed tomography (FCT) scans of 67 consecutive patients with isolated orbital floor blowout fractures were analyzed using Osirix. Planes of reference for orbital fractures, a standardized technique for performing measurements on FCT, was used. Viewed coronally, the orbit was divided into seven equal sagittal slices (L1 laterally to L7 medially) with reference to the midorbital plane. The distances of PL from IM and location of optic foramen were determined. Results The greatest distance to PL is found at L5 (median: 30.1 mm, range: 13.5-37.1 mm). The median and ranges for each slice are as follows: L1 (median: 0.0 mm, range: 0.0-19.9 mm), L2 (median: 0.0 mm, range: 0.0-21.5 mm), L3 (median: 15.8 mm, range: 0.0-31.7 mm), L4 (median: 26.1 mm, range: 0.0-34.0 mm), L5 (median: 30.1 mm, range: 13.5-37.1 mm), L6 (median: 29.0 mm, range: 0.0-36.3 mm), L7 (median: 20.8 mm, range: 0.0-39.2 mm). The median distance of the optic foramen from IM is 43.7 mm (range: 37.0- 49.1) at L7. Conclusion Distance to PL from IM increases medially until the L5 before decreasing. A reference map of the PL in relation to the IM and optic foramen is generated. The optic foramen is located in close proximity to the PL at the medial orbital floor. This aids in preoperative planning and intraoperative dissection.
RESUMO
Reconstruction of defects around the knee region requires thin and pliable skin. The superior lateral genicular artery (SLGA) flap provides an excellent alternative to muscle-based flaps. The anatomy and the surgical techniques of the SLGA flap were reviewed and the results of cases using the SLGA flap for coverage of knee and proximal leg defects were analyzed. SLGA flaps were performed in two cases and followed up for at least 6 months. Twelve articles on the use of the SLGA flap were also identified. A review of 39 cases showed that the mean diameter of the perforator supplying the skin of the flap was 1.04 mm, while the mean diameter of the SLGA at its origin was 1.78 mm. The mean length of the pedicle measured from the origin of the popliteal artery was 7.44 cm. The average dimensions of the flap were 14.8×6.6 cm with primary closure of the donor site in 61.5% of cases. Of these cases, 38.5% were due to trauma, 23.1% were post-burn complications, 12.8% were defects after resection of tumors, and 10.3% were for ulcers post-bursectomy. The most common complication was flap tip necrosis. All studies reported favorable outcomes with complete wound healing.
RESUMO
BACKGROUND: Intraoperative frozen section (IFS) is often utilised in the surgical treatment of nonmelanocytic skin cancer (NMSC) in sensitive facial regions when Mohs micrographic surgery (MMS) is not available. OBJECTIVE: To compare the outcome of NMSC patients with excision performed with and without IFS. MATERIALS AND METHODS: A retrospective, single-centre study was performed on all patients who had undergone resection of NMSC with and without IFS control at the National University Hospital (NUH) from 2010 to 2015. RESULTS: 116 patients were recruited, of which 86 had IFS and 30 did not. The complete excision rate of patients with IFS was higher at 87.2% (p=0.0194), need for secondary operation was lower at 1.2% (p=0.005), and need for postsurgery radiotherapy or chemotherapy was lower at 1.2% (p=0.001). The average duration of surgery in patients who underwent IFS was 95.4 minutes compared to 70.1 minutes in cases which did not undergo IFS. CONCLUSION: Our study showed an increased complete excision rate and reduced need for secondary surgeries and adjuvant therapy in patients with IFS. However, a longer operative duration was required. Use of IFS may be useful in patients with NMSC lesions in sensitive regions requiring complex reconstruction after tumour excision.
RESUMO
Implant exposure is a known complication of titanium mesh cranioplasty and is usually managed by implant removal and/or exchange. We describe a case of exposed titanium mesh cranioplasty which was managed with implant exchange and bipedicled flap coverage, and showcase an interesting phenomenon of full-thickness skin present beneath the exposed mesh. This was confirmed on histopathology, which showed the presence of dermal appendages including pilosebaceous units and eccrine glands. We postulate that the mechanism behind this phenomenon involves islands of viable skin 'dropping' between holes in the mesh and coalescing beneath the exposed implant, as suggested by histopathology findings of nodular protrusions and varying degrees of epidermal hyperplasia. This protects the underlying dura from external infection. We propose for this phenomenon to be called dermointegration. Our findings suggest that similar cases, particularly patients who are not fit for general anaesthesia, may potentially be managed with a more conservative approach.
RESUMO
Skull reconstruction is an important and challenging task in craniofacial surgery planning, forensic investigation and anthropological studies. Existing methods typically reconstruct approximating surfaces that regard corresponding points on the target skull as soft constraints, thus incurring non-zero error even for non-defective parts and high overall reconstruction error. This paper proposes a novel geometric reconstruction method that non-rigidly registers an interpolating reference surface that regards corresponding target points as hard constraints, thus achieving low reconstruction error. To overcome the shortcoming of interpolating a surface, a flip-avoiding method is used to detect and exclude conflicting hard constraints that would otherwise cause surface patches to flip and self-intersect. Comprehensive test results show that our method is more accurate and robust than existing skull reconstruction methods. By incorporating symmetry constraints, it can produce more symmetric and normal results than other methods in reconstructing defective skulls with a large number of defects. It is robust against severe outliers such as radiation artifacts in computed tomography due to dental implants. In addition, test results also show that our method outperforms thin-plate spline for model resampling, which enables the active shape model to yield more accurate reconstruction results. As the reconstruction accuracy of defective parts varies with the use of different reference models, we also study the implication of reference model selection for skull reconstruction.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Crânio/diagnóstico por imagem , Algoritmos , Humanos , Processamento de Imagem Assistida por Computador/estatística & dados numéricos , Imageamento Tridimensional/estatística & dados numéricos , Modelos Anatômicos , Crânio/anatomia & histologia , Crânio/cirurgia , Fraturas Cranianas/diagnóstico por imagem , Fraturas Cranianas/patologia , Fraturas Cranianas/cirurgia , Cirurgia Assistida por Computador/métodos , Cirurgia Assistida por Computador/estatística & dados numéricos , Tomografia Computadorizada por Raios XRESUMO
Defects involving specialised areas with characteristic anatomical features, such as the nipple, upper eyelid, and lip, benefit greatly from the use of sharing procedures. The vulva, a complex 3-dimensional structure, can also be reconstructed through a sharing procedure drawing upon the contralateral vulva. In this report, we present the interesting case of a patient with chronic, massive, localised lymphedema of her left labia majora that was resected in 2011. Five years later, she presented with squamous cell carcinoma over the left vulva region, which is rarely associated with chronic lymphedema. To the best of our knowledge, our management of the radical vulvectomy defect with a labia majora sharing procedure is novel and has not been previously described. The labia major flap presented in this report is a shared flap; that is, a transposition flap based on the dorsal clitoral artery, which has consistent vascular anatomy, making this flap durable and reliable. This procedure epitomises the principle of replacing like with like, does not interfere with leg movement or patient positioning, has minimal donor site morbidity, and preserves other locoregional flap options for future reconstruction. One limitation is the need for a lax contralateral vulva. This labia majora sharing procedure is a viable option in carefully selected patients.
RESUMO
INTRODUCTION: To avoid the risk of pulmonary aspiration, fasting before anaesthesia is important. We postulated that the rate of noncompliance with fasting would be high in patients who were admitted on the day of surgery. Therefore, we surveyed patients in our institution to determine the rate of fasting compliance. We also examined patients' knowledge on preoperative fasting, as well as their perception of and attitudes toward preoperative fasting. METHODS: Patients scheduled for 'day surgery' or 'same day admission surgery' under general or regional anaesthesia were surveyed over a four-week period. The patients were asked to answer an eighteen-point questionnaire on demographics, preoperative fasting and attitudes toward fasting. RESULTS: A total of 130 patients were surveyed. 128 patients fasted before surgery, 111 patients knew that they needed to fast for at least six hours before surgery, and 121 patients believed that preoperative fasting was important, with 103 believing that preoperative fasting was necessary to avoid perioperative complications. However, patient understanding was poor, with only 44.6% of patients knowing the reason for fasting, and 10.8% of patients thinking that preoperative fasting did not include abstinence from beverages and sweets. When patients who did and did not know the reason for fasting were compared, we did not find any significant differences in age, gender or educational status. CONCLUSION: Despite the patients' poor understanding of the reason for fasting, they were highly compliant with preoperative fasting. This is likely a result of their perception that fasting was important. However, poor understanding of the reason for fasting may lead to unintentional noncompliance.
Assuntos
Anestesia/efeitos adversos , Jejum , Cooperação do Paciente , Pneumonia Aspirativa/prevenção & controle , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Anestesia Geral/efeitos adversos , Anestesiologia/normas , Criança , Pré-Escolar , Feminino , Humanos , Lactente , Masculino , Pessoa de Meia-Idade , Educação de Pacientes como Assunto , Cuidados Pré-Operatórios/normas , Singapura , Inquéritos e Questionários , Centros de Atenção Terciária , Adulto JovemAssuntos
Transplante Ósseo/métodos , Cartilagem/transplante , Ossos Faciais/lesões , Fraturas Ósseas/cirurgia , Procedimentos de Cirurgia Plástica/métodos , Rinoplastia/métodos , Fáscia/transplante , Fixação de Fratura/métodos , Sobrevivência de Enxerto , Humanos , Prognóstico , Medição de Risco , Coleta de Tecidos e Órgãos/métodosRESUMO
Facial fracture patients are seen in a Level 1 trauma hospital. In our institution, we manage many patients with facial fractures and carry out more than 150 surgical procedures every year. Open reduction and internal fixation is our management of choice. All surgical procedures involve drilling of bone and implant insertion to keep the fractured bones in an anatomically reduced position to aid healing. Occasionally, drill bits used to create the pilot hole break and are embedded in the bone. We present a situation in which such an incident occurred and review the literature on retained broken implants and devices.
RESUMO
BACKGROUND: The combination of polycaprolactone and hyaluronic acid creates an ideal environment for wound healing. Hyaluronic acid maintains a moist wound environment and accelerates the in-growth of granulation tissue. Polycaprolactone has excellent mechanical strength, limits inflammation and is biocompatible. This study evaluates the safety and efficacy of bio-conjugated polycaprolactone membranes (BPM) as a wound dressing. METHODS: 16 New Zealand white rabbits were sedated and local anaesthesia was administered. Two 3.0×3.0 cm full-thickness wounds were created on the dorsum of each rabbit, between the lowest rib and the pelvic bone. The wounds were dressed with either BPM (n=12) or Mepitel (n=12) (control), a polyamide-silicon wound dressing. These were evaluated macroscopically on the 7th, 14th, 21st, and 28th postoperative days for granulation, re-epithelialization, infection, and wound size, and histologically for epidermal and dermal regeneration. RESULTS: Both groups showed a comparable extent of granulation and re-epithelialization. No signs of infection were observed. There was no significant difference (P>0.05) in wound size between the two groups. BPM (n=6): 8.33 cm(2), 4.90 cm(2), 3.12 cm(2), 1.84 cm(2); Mepitel (n=6): 10.29 cm(2), 5.53 cm(2), 3.63 cm(2), 2.02 cm(2); at the 7th, 14th, 21st, and 28th postoperative days. The extents of epidermal and dermal regeneration were comparable between the two groups. CONCLUSIONS: BPM is comparable to Mepitel as a safe and efficacious wound dressing.
RESUMO
BACKGROUND: Burn infliction techniques are poorly described in rat models. An accurate study can only be achieved with wounds that are uniform in size and depth. We describe a simple reproducible method for creating consistent burn wounds in rats. METHODS: Ten male Sprague-Dawley rats were anesthetized and dorsum shaved. A 100 g cylindrical stainless-steel rod (1 cm diameter) was heated to 100â in boiling water. Temperature was monitored using a thermocouple. We performed two consecutive toe-pinch tests on different limbs to assess the depth of sedation. Burn infliction was limited to the loin. The skin was pulled upwards, away from the underlying viscera, creating a flat surface. The rod rested on its own weight for 5, 10, and 20 seconds at three different sites on each rat. Wounds were evaluated for size, morphology and depth. RESULTS: Average wound size was 0.9957 cm(2) (standard deviation [SD] 0.1845) (n=30). Wounds created with duration of 5 seconds were pale, with an indistinct margin of erythema. Wounds of 10 and 20 seconds were well-defined, uniformly brown with a rim of erythema. Average depths of tissue damage were 1.30 mm (SD 0.424), 2.35 mm (SD 0.071), and 2.60 mm (SD 0.283) for duration of 5, 10, 20 seconds respectively. Burn duration of 5 seconds resulted in full-thickness damage. Burn duration of 10 seconds and 20 seconds resulted in full-thickness damage, involving subjacent skeletal muscle. CONCLUSIONS: This is a simple reproducible method for creating burn wounds consistent in size and depth in a rat burn model.
RESUMO
Titanium meshes have been extensively used in craniomaxillofacial surgery. The benefits of these titanium implants include being inert, stable, and radiopaque and having good drainage properties. The titanium mesh is cut to shape and bent before implantation, which may give rise to the cut edges being jagged and sharp. This can lead to soft tissue being caught or lacerated by these sharp ends. A change in technique to cut and shape the implant may reduce this problem. The implant should be cut right at the end of the bars flush with the remaining parts of the implant. We present a new and simple method for smoothing these troublesome edges. We use the diathermy scratch pad or tip cleaner, a tool used frequently in every major surgery. This scratch pad can be used as a rasp to smoothen the edges of the titanium mesh once it is cut into shape.
RESUMO
The fibular free flap is the gold standard for mandibular reconstruction. Accurate 3-dimensional contouring and precise alignment of the fibula is critical for reestablishing native occlusion and facial symmetry. Following segmental mandibulectomy, the remaining mandibular fragments become freely mobile. Various stabilization methods including external fixation, intermaxillary fixation, and preplating with reconstruction plate have been used. We describe a modification to the preplating technique. After wide resection of buccal squamous cell carcinoma, our patient had an 11-cm mandibular defect from the angle of the left mandible to the right midparasymphyseal region. A single 2.0-mm Unilock® (Synthes, Singapore) plate was used to span the defect. This was placed on the vestibular aspect of the superior border of the mandibular remnants before resection. Segmental mandibulectomy was then performed with the plate removed. The spanning plate was then reattached to provide rigid fixation. The fibular bone was contoured with a single osteotomy and reattached. The conventional technique involves molding of the plate at the inferior border of the mandible. This is time-consuming and not possible in patients with distorted mandibular contour. It is also difficult to fit the osteotomized fibula to the contoured plate. In comparison, the superiorly positioned spanning plate achieve rigid fixation of the mandible while leaving the defect completely free and unhampered by hardware, allowing space for planning osteotomies and easier fixation of the neomandible. Using this modified technique, we are able to recreate the original mandibular profile with ease.