CXCL5/CXCL8 induces neutrophilic inflammation in peri-implantitis.

OBJECTIVE AND BACKGROUND: This research aimed to examine the role of C-X-C motif chemokine ligand 5 (CXCL5) and C-X-C motif chemokine ligand 8 (CXCL8; also known as IL-8) in neutrophilic inflammation triggered by peri-implantitis and to shed light on the underlying mechanisms that link them to the development of this condition. MATERIALS: This study included 40 patients who visited the Department of Periodontology at Kyungpook University Dental Hospital. They were divided into two groups based on their condition: healthy implant (HI) group (n = 20) and peri-implantitis (PI) group (n = 20). Biopsy samples of PI tissue were collected from the patients under local anesthesia. HI tissue was obtained using the same method during the second implant surgery. To construct libraries for control and test RNAs, the QuantSeq 3' mRNA-Seq Library Prep Kit (Lexogen, Inc., Austria) was used according to the manufacturer's instructions. Samples were pooled based on representative cytokines obtained from RNA sequencing results and subjected to Reverse transcription-quantitative polymerase chain reaction (RT-qPCR). Hematoxylin and eosin staining, and immunohistochemistry (IHC) analysis were performed to visually assess expression levels and analyze tissue histology. Student's t-test was employed to conduct statistical analyses. RESULTS: Initially, heatmaps were used to examine gene expression variations between the HI and PI groups based on the results of RNA sequencing. Notably, among various cytokines, CXCL5 and CXCL8 had the highest expression levels in the PI group compared with the HI group, and they are known to be associated with inflammatory responses. In the gingival tissues, the expression of genes encoding cytokines such as interleukin (IL)-1ß, tumor necrosis factor-alpha (TNF)-α, interleukin (IL)-6, and CXCL5/CXCL8 was assessed via RT-qPCR. The mRNA expression level of CXCL5/CXCL8 significantly increased in the PI group compared with the HI group (p < .045). Contrarily, the mRNA expression level of interleukin 36 receptor antagonist (IL36RN) significantly decreased (p < .008). IHC enabled examination of the distribution and intensity of CXCL5/CXCL8 protein expression within the tissue samples. Specifically, increased levels of CXCL5/CXCL8 promote inflammatory responses, cellular proliferation, migration, and invasion within the peri-implant tissues. These effects are mediated through the activation of the PI3K/Akt/NF-κB signaling pathway. CONCLUSIONS: This study found that the PI sites had higher gene expression level of CXCL8/CXCL5 in the soft tissue than HI sites, which could help achieve more accurate diagnosis and treatment planning.

Longitudinal Study of Bone Height Change between Two Approaches for Sinus Floor Elevation.

Background and Objectives: The purpose of this study is to assess the long-term maintenance of each approach of sinus elevation, the crestal approach and lateral approach, by comparing the radiographic results of each technique. Materials and Methods: In total, 103 patients who had undergone an implant procedure with either the crestal approach or lateral approach method applied to their maxillary molar edentulous area were included. Using orthopantomographs, the radiographic changes were consistently evaluated over 3 years after the procedure (immediately after procedure and 1 year, 2 years and 3 years after implant placement) Results: The radiographic evaluation after 3 years of implantation with sinus elevation showed a significant amount of bone formation (8.07 mm for crestal approach and 12.00 mm for lateral approach method). The largest amount of grafted height loss occurred during the 1 year, but the resorption was minimal (0.98 mm for crestal approach and 0.95 mm for lateral approach method) over the entire 3 years. Conclusions: Although the lateral approach showed more bone growth, the amount of bone resorption was similar to that of the crestal approach. Both methods showed the highest amount of bone resorption in the first year, and the amount of change thereafter was insignificant. It is judged that both methods can be used according to the situation to help implant placement.

Long-Term Survival Rate of Autogenous Tooth Transplantation: Up to 162 Months.

Background and Objectives: The purpose of this study is to observe the usefulness of autogenous tooth transplantation by examining the cumulative survival rate according to the period of auto-transplanted teeth as pre-implant treatment. Materials and Methods: This study was conducted on 111 patients who visited Kyungpook National University Dental Hospital and underwent autogenous tooth transplantation between November 2008 and January 2021 (about 13 years). The cumulative survival rate of autogenous tooth transplantation according to the causes of extraction of the recipient tooth (caries, periapical lesion, crack, crown fracture, periodontitis) and condition of opposing teeth (natural teeth vs. fixed prosthesis). The cumulative survival rate of autogenous tooth transplantation according to the age (under 30 vs. over 30) was also investigated and it was examined whether there were any differences in each factor. Results: The average follow-up period was 12 months, followed by a maximum of 162 months. The 24-month cumulative survival rate of all auto-transplanted teeth was 91.7%, 83.1% at 60 months and the 162-month cumulative survival rate was 30.1%. There were no statistical differences between the causes of extraction of the recipient's teeth, differences in the condition of the opposing teeth, and differences under and over the age of 30. Conclusions: The survival rate of autogenous tooth transplantation appears to be influenced by the conditions of the donor tooth rather than the conditions of the recipient tooth. Although autogenous tooth transplantation cannot completely replace implant treatment, it is meaningful in that it can slightly delay or at least earn the time until implant placement is possible.

Effects of resveratrol on bone-healing capacity in the mouse tooth extraction socket.

BACKGROUND AND OBJECTIVE: After tooth extraction, the extraction socket undergoes several steps of soft and hard tissue healing. The healing process of the extraction socket is modulated by a range of signaling factors and biochemical agents. It has been reported that resveratrol, a polyphenolic compound, exhibits various biological effects, including anti-inflammatory, anti-carcinogenic, antioxidant, and anti-aging effects, and protects cardiovascular and bone tissues. In this study, we examined the cellular effects of resveratrol on human periodontal ligament (hPDL) cells and osteoblast-like (MC3T3-E1) cells and evaluated the bone-healing capacity of tooth extraction sockets in mice. MATERIAL AND METHODS: Resveratrol was applied to hPDL and MC3T3-E1 cells to detect cell proliferation and alkaline phosphatase (ALP) activity, and qPCR was employed to understand the gene expression level in vitro. For in vivo experiment, six-week-old C57BL/6 male mice were randomly divided into control (n = 15) and experimental (n = 15) groups and maxillary first molars were extracted by surgery. Experimental groups received 50-µM resveratrol on extraction sockets and analyzed the degree of new bone formation. RESULTS: Treatment of hPDL and MC3T3-E1 cells with resveratrol increased the cell proliferation and ALP activity and enhanced the expression of ALP, BMP-2, BMP-4, and OC genes. Resveratrol enhanced new bone formation in the lingual extraction socket in mice. CONCLUSION: These results suggest that resveratrol increases the cellular physiology of PDL and osteoblast including their proliferation and differentiation and may play an important role in bone-healing capacity after tooth extraction.

Characterization of red ginseng-drug interaction by CYP3A activity increased in high dose administration in mice.

Ginseng (Panax ginseng Meyer) is a popular traditional herbal medicine used worldwide. Patients often take ginseng preparations with other medicines where the ginseng dose could exceed the recommended dose during long-term administration. However, ginseng-drug interactions at high doses of ginseng are poorly understood. This study showed the possibility of herb-drug interactions between the Korean red ginseng (KRG) extract and cytochrome P450 (CYP) substrates in higher administration in mice. The CYP activities were determined in vivo after oral administration of KRG extract doses of 0.5, 1.0, and 2.0 g/kg for 2 or 4 weeks by monitoring the concentration of five CYP substrates/metabolites in the blood. The area under the curve for OH-midazolam/midazolam catalysed by CYP3A was increased significantly by the administration of 2.0 g/kg KRG extract for 2 and 4 weeks. CYP3A-catalysed midazolam 1'-hydroxylation also increased significantly in a dose- and time-dependent manner in the S9 fraction of mouse liver which was not related to induction by transcription. Whereas CYP2D-catalysed dextromethorphan O-deethylation decreased in a dose- and time-dependent manner in vivo. In conclusion, interactions were observed between KRG extract and CYP2D and CYP3A substrates at subchronic-high doses of KRG administration in mice.

SOD2 is upregulated in periodontitis to reduce further inflammation progression.

OBJECTIVES: Periodontitis is a highly prevalent chronic inflammatory disease that results in destruction of tooth-supporting structures followed by tooth-loss. Until now, periodontitis has been regarded to be initiated by bacterial infection followed by aberrant host response. Although increasing evidence suggests a strong association between oxidative stress and periodontitis, precise molecular mechanism has been left unanswered. In this study, we investigated roles of SOD2, the main antioxidant enzyme maintaining reactive oxygen species (ROS) homeostasis, under inflammatory conditions. METHODS: We computationally analyzed SOD2 expression in periodontitis. To confirm this data, immunoblot assay was performed with samples from periodontitis patients. The cellular mechanism of change in SOD2 expression was identified through immunoblot assay and immunofluorescence. To evaluate the molecular function of SOD2, we generated SOD2-deficient cells by utilizing the CRISPR/Cas9 system. RESULTS: We first determined that SOD2 expression was significantly increased in periodontitis. We also confirmed that SOD2 expression was upregulated through the NF-κB pathway when the inflammatory signal was stronger and extended. Gene manipulation against SOD2 through the CRISPR/Cas9 system showed that the absence of SOD2 increased production of NLRP3 inflammasome components. CONCLUSIONS: Our study demonstrates that intracellular SOD2 has a protective role by suppressing NLRP inflammasome-caspase-1-IL-1ß axis under inflammatory conditions.

Comparative Evaluation of Recombinant Human Bone Morphogenetic Protein-2/Hydroxyapatite and Bovine Bone for New Bone Formation in Alveolar Ridge Preservation.

PURPOSE: Hydroxyapatite treated with recombinant human bone morphogenetic protein-2/Hydroxyapatite (rhBMP-2/HA) or bovine bone was applied on extraction sockets for alveolar ridge preservation, and the results were compared with respect to clinical and histological bone formation. MATERIALS AND METHODS: This was a prospective, randomized controlled clinical trial performed on 20 implant placement sites (10 in the experimental and 10 in the control group). rhBMP-2/HA was applied on extraction sockets in the experimental group and bovine bone on those of the control group. The bone at the corresponding sites was biopsied 3 months later, and clinical, histological, and histomorphometric analyses were performed. RESULTS: The alveolar bone height was well preserved in both groups with relatively less change in width in the experimental group compared with the control group. The percentage of new bone was 25.37% ± 17.23% in the experimental group and 6.13% ± 4.32% in the control group; the difference was statistically significant. CONCLUSIONS: The alveolar ridge was preserved clinically and histologically in both groups. rhBMP-2/HA resulted in greater new bone formation than bovine bone 3 months after the surgery.

Effects of Enhanced Hydrophilic Titanium Dioxide-Coated Hydroxyapatite on Bone Regeneration in Rabbit Calvarial Defects.

The regeneration of bone defects caused by periodontal disease or trauma is an important goal. Porous hydroxyapatite (HA) is an osteoconductive graft material. However, the hydrophobic properties of HA can be a disadvantage in the initial healing process. HA can be coated with TiO2 to improve its hydrophilicity, and ultraviolet irradiation (UV) can further increase the hydrophilicity by photofunctionalization. This study was designed to evaluate the effect of 5% TiO2-coated HA on rabbit calvarial defects and compare it with that of photofunctionalization on new bone in the early stage. The following four study groups were established, negative control, HA, TiO2-coated HA, and TiO2-coated HA with UV. The animals were sacrificed and the defects were assessed by radiography as well as histologic and histomorphometric analyses. At 2 and 8 weeks postoperatively, the TiO2-coated HA with UV group and TiO2-coated HA group showed significantly higher percentages of new bone than the control group (p < 0.05). UV irradiation increased the extent of new bone formation, and there was a significant difference between the TiO2-coated HA group and TiO2-coated HA with UV group. The combination of TiO2/HA and UV irradiation in bone regeneration appears to induce a favorable response.

Proteomics approach to identify novel metastatic bone markers from the secretome of PC-3 prostate cancer cells.

Prostate cancer is the leading type of cancer diagnosed, and the most frequent cause of worldwide male cancer-related deaths annually. The limitations of current prostate cancer screening tests demand the identification of novel biomarkers for the early diagnosis of prostate cancer bone metastasis. In the present study, we performed a proteomic analysis of secreted proteins from the prostate cancer bone metastasis cell line, PC-3, and the normal prostate cell line, RWPE-1. We thus quantified 917 proteins, of which 68 were found to be secreted at higher levels by PC-3 than by RWPE-1 cells via LC-MS/MS. To characterize the highly secreted proteins in the PC-3 cell line and thereby identify biomarker proteins, we divided the quantifiable proteins into four quantitative categories (Q1-Q4). The KEGG lysine degradation and osteoclast differentiation pathways were demonstrated to be enriched in the highly secreted Q4 protein group. Transforming growth factor (TGF) beta family proteins related to osteoclast differentiation were identified as key regulators of PC-3 cell proliferation. Immunoblotting was used to confirm the observed high level of pentraxin, follistatin, TGF-beta family members, and serpin B3 secretion by PC-3 cells. From the collective results of the present study, we suggest that serpin B3 is a promising novel biomarker candidate for the diagnosis of prostate cancer bone metastasis.

Transcriptome sequencing of gingival biopsies from chronic periodontitis patients reveals novel gene expression and splicing patterns.

BACKGROUND: Periodontitis is the most common chronic inflammatory disease caused by complex interaction between the microbial biofilm and host immune responses. In the present study, high-throughput RNA sequencing was utilized to systemically and precisely identify gene expression profiles and alternative splicing. METHODS: The pooled RNAs of 10 gingival tissues from both healthy and periodontitis patients were analyzed by deep sequencing followed by computational annotation and quantification of mRNA structures. RESULTS: The differential expression analysis designated 400 up-regulated genes in periodontitis tissues especially in the pathways of defense/immunity protein, receptor, protease, and signaling molecules. The top 10 most up-regulated genes were CSF3, MAFA, CR2, GLDC, SAA1, LBP, MME, MMP3, MME-AS1, and SAA4. The 62 down-regulated genes in periodontitis were mainly cytoskeletal and structural proteins. The top 10 most down-regulated genes were SERPINA12, MT4, H19, KRT2, DSC1, PSORS1C2, KRT27, LCE3C, AQ5, and LCE6A. The differential alternative splicing analysis revealed unique transcription variants in periodontitis tissues. The EDB exon was predominantly included in FN1, while exon 2 was mostly skipped in BCL2A1. CONCLUSIONS: These findings using RNA sequencing provide novel insights into the pathogenesis mechanism of periodontitis in terms of gene expression and alternative splicing.

Analysis of the esthetic outcome after root coverage procedures using a comprehensive approach.

STATEMENT OF THE PROBLEM: There is a reported gap between the relative satisfaction of the clinician and patient after a root coverage procedure. In addition, there may also be a disparity between objective esthetic evaluation tools and subjective satisfaction. METHODS: This study included 58 sites in 31 patients who had undergone root coverage procedures. The percentage of root coverage and the root coverage esthetic score system were used as objective measurements. A questionnaire with a five-point ordinal scale was used for subjective evaluation. Initial recession depth and width, Miller classification, tissue biotype, treatment procedures, and follow-up periods were considered as associated factors. RESULTS: After a period of at least 6 months from the procedure, the patient-perceived outcome showed a better match with the root coverage esthetic scoring system than the percentage of root coverage alone. A lower value for objective outcome was obtained for a deeper gingival recession and higher Miller class, but the subjective outcome displayed a steady trend. All four esthetic results were at their lowest after an epithelialized free soft tissue graft. CONCLUSION: An esthetic outcome according to patient satisfaction was not always consistent with that determined by professional scoring. In addition, partial root coverage may be viewed as a positive outcome by patients and clinicians in cases of deep gingival recession and high Miller class. CLINICAL SIGNIFICANCE: This study evaluates the esthetic outcome of root coverage procedures using an objective method, including the percentage of root coverage, root coverage esthetic scoring system, and subjective assessment by patient and clinician-based questionnaires. The results will be helpful for the understanding of the differences that exist in esthetic satisfaction.

Resveratrol facilitates bone formation in high-glucose conditions.

Periodontitis is known to be affected by high-glucose conditions, which poses a challenge to periodontal tissue regeneration, particularly in bone formation. In this study, the potential effects of resveratrol (3,5,4'-trihydroxystilbene, RSV) in facilitating bone formation under high-glucose conditions after periodontitis has been investigated. We focused on the analysis of osteoblasts and periodontal ligament cells, which are essential for bone formation including cell proliferation and differentiation. And we aimed to investigate the impact of RSV on bone healing, employed diabetic mouse model induced by streptozotocin and confirmed through histological observation. High-glucose conditions adversely affected cell proliferation and ALP activity in both MC3T3-E1 and hPDLF in vitro, with more significant impact on MC3T3-E1 cells. RSV under high-glucose conditions had positive effects on both, showing early-stage effects for MC3T3-E1 cells and later-stage effects for hPDLF cells. RSV seemed to have a more pronounced rescuing role in MC3T3-E1 cells. Increased ALP activity was observed and the expression levels of significant genes, such as Col 1, TGF-ß1, ALP, and OC, in osteogenic differentiation were exhibited stage-specific expression patterns. Upregulated Col 1 and TGF-ß1 were detected in the early stage, and then ALP and OC expressions became more pronounced in the later stages. Similarly, stronger positive reactions against RUNX2 were detected in the RSV-treated group compared to the control. Furthermore, in in vivo experiment, RSV stimulates the growth and differentiation of osteoblasts, thereby promoting bone formation. High-glucose levels have the potential to impair cellular functions and the regenerative capacity to facilitate bone formation with MC3T3-E1 rather than hPDLF cells. Resveratrol appears to facilitate the inherent abilities of MC3T3-E1 cells compared with hPDLF cells, indicating its potential capacity to restore functionality during periodontal regeneration.

Influence of Dental Titanium Implants with Different Surface Treatments Using Femtosecond and Nanosecond Lasers on Biofilm Formation.

This study aimed to evaluate the impact of different surface treatments (machined; sandblasted, large grit, and acid-etched (SLA); hydrophilic; and hydrophobic) on dental titanium (Ti) implant surface morphology, roughness, and biofilm formation. Four groups of Ti disks were prepared using distinct surface treatments, including femtosecond and nanosecond lasers for hydrophilic and hydrophobic treatments. Surface morphology, wettability, and roughness were assessed. Biofilm formation was evaluated by counting the colonies of Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), and Prevotella intermedia (Pi) at 48 and 72 h. Statistical analysis was conducted to compare the groups using the Kruskal-Wallis H test and the Wilcoxon signed-rank test (α = 0.05). The analysis revealed that the hydrophobic group had the highest surface contact angle and roughness (p < 0.05), whereas the machined group had significantly higher bacterial counts across all biofilms (p < 0.05). At 48 h, the lowest bacterial counts were observed in the SLA group for Aa and the SLA and hydrophobic groups for Pg and Pi. At 72 h, low bacterial counts were observed in the SLA, hydrophilic, and hydrophobic groups. The results indicate that various surface treatments affect implant surface properties, with the hydrophobic surface using femtosecond laser treatment exerting a particularly inhibitory effect on initial biofilm growth (Pg and Pi).

In Vitro Biofilm Formation on Zirconia Implant Surfaces Treated with Femtosecond and Nanosecond Lasers.

(1) Background: The purpose of this study was to evaluate how a zirconia implant surface treated with laser technology affects the degree of biofilm formation. (2) Methods: Experimental titanium (Ti) disks were produced that were sandblasted with large grit and acid-etched (T), and they were compared with zirconia (ZrO2) discs with a machined (M) surface topography; a hydrophilic surface topography with a femtosecond laser (HF); and a hydrophobic surface topography with a nanosecond laser (HN) (N = 12 per surface group). An in vitro three-species biofilm sample (Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), Prevotella intermedia (Pi)) was applied to each disc type, and bacterial adhesion was assessed after 48 and 72 h of incubation using an anaerobic flow chamber model. Statistical significance was determined using the Kruskal-Wallis H test, with Bonferroni correction used for the post-hoc test (α = 0.05). (3) Results: Compared to the T group, the M group exhibited more than twice as many viable bacterial counts in the three-species biofilm samples (p < 0.05). In comparison to the T group, the HF group had significantly higher viable bacterial counts in certain biofilm samples at 48 h (Aa and Pi) and 72 h (Pi) (p < 0.05). The HN group had higher viable bacterial counts in Pi at 48 h (5400 CFU/mL, p < 0.05) than the T group (4500 CFU/mL), while showing significantly lower viable bacterial counts in Pg at both 48 (3010 CFU/mL) and 72 h (3190 CFU/mL) (p < 0.05). (4) Conclusions: The surface treatment method for zirconia discs greatly influences biofilm formation. Notably, hydrophobic surface treatment using a nanosecond laser was particularly effective at inhibiting Pg growth.

The Impact of Mechanical Debridement Techniques on Titanium Implant Surfaces: A Comparison of Sandblasted, Acid-Etched, and Femtosecond Laser-Treated Surfaces.

This study evaluated the effects of various mechanical debridement methods on the surface roughness (Ra) of dental implants, comparing femtosecond laser-treated surfaces with conventionally machined and sandblasted with large-grit sand and acid-etched (SLA) implant surfaces. The fabrication of grade 4 titanium (Ti) disks (10 mm in diameter and 1 mm thick) and the SLA process were carried out by a dental implant manufacturer (DENTIS; Daegu, Republic of Korea). Subsequently, disk surfaces were treated with various methods: machined, SLA, and femtosecond laser. Disks of each surface-treated group were post-treated with mechanical debridement methods: Ti curettes, ultrasonic scaler, and Ti brushes. Scanning electron microscopy, Ra, and wettability were evaluated. Statistical analysis was performed using the Kruskal-Wallis H test, with post-hoc analyses conducted using the Bonferroni correction (α = 0.05). In the control group, no significant difference in Ra was observed between the machined and SLA groups. However, femtosecond laser-treated surfaces exhibited higher Ra than SLA surfaces (p < 0.05). The application of Ti curette or brushing further accentuated the roughness of the femtosecond laser-treated surfaces, whereas scaling reduced the Ra in SLA surfaces. Femtosecond laser-treated implant surfaces, with their unique roughness and compositional attributes, are promising alternatives in dental implant surface treatments.

Effect of Electrocautery and Laser Treatment on the Composition and Morphology of Surface-Modified Titanium Implants.

The purpose of this study was to investigate the effects of different peri-implantitis treatment methods (Er,Cr:YSGG laser, diode laser, and electrocautery) on various titanium implant surfaces: machined; sandblasted, large-grit, and acid-etched; and femtosecond laser-treated surfaces. Grade 4 titanium (Ti) disks, with a diameter of 10 mm and a thickness of 1 mm, were fabricated and treated using the aforementioned techniques. Subsequently, each treated group of disks underwent different peri-implantitis treatment methods: Er,Cr:YSGG laser (Biolase, Inc., Foothill Ranch, CA, USA), diode laser (Biolase, Inc., Foothill Ranch, CA, USA), and electrocautery (Ellman, Hicksville, NY, USA). Scanning electron microscopy, energy-dispersive X-ray spectroscopy, and wettability were used to characterize the chemical compositions and surfaces of the treated titanium surfaces. Significant changes in surface roughness were observed in both the electrocautery (Sa value of machined surface = 0.469, SLA surface = 1.569, femtosecond laser surface = 1.741, and p = 0.025) and Er,Cr:YSGG laser (Ra value of machined surface = 1.034, SLA surface = 1.380, femtosecond laser surface = 1.437, and p = 0.025) groups. On femtosecond laser-treated titanium implant surfaces, all three treatment methods significantly reduced the surface contact angle (control = 82.2°, diode laser = 74.3°, Er,Cr:YSGG laser = 73.8°, electrocautery = 76.2°, and p = 0.039). Overall, Er,Cr:YSGG laser and electrocautery treatments significantly altered the surface roughness of titanium implant surfaces. As a result of surface composition after different peri-implantitis treatment methods, relative to the diode laser and electrocautery, the Er,Cr:YSGG laser increased oxygen concentration. The most dramatic change was observed after Er:Cr;YSGG laser treatment, urging caution for clinical applications. Changes in surface composition and wettability were observed but were not statistically significant. Further research is needed to understand the biological implications of these peri-implantitis treatment methods.

Quantification of subgingival bacterial pathogens at different stages of periodontal diseases.

Anaerobic gram-negative oral bacteria such as Treponema denticola, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Campylobacter rectus, and Fusobacterium nucleatum are closely associated with periodontal diseases. We measured the relative population (bacterial levels) of these oral pathogens in subgingival tissues of patients at different stages of Korean chronic periodontal diseases. We divided the individuals into those with chronic gingivitis (G), moderate periodontitis (P1), severe periodontitis (P2), and normal individuals (N) (n = 20 for each group) and subgingival tissue samples were collected. We used real-time PCR with TaqMan probes to evaluate the change of periodontal pathogens among different stages of periodontitis. Bacterial levels of A. actinomycetemcomitans and C. rectus are significantly increased in individuals with chronic gingivitis and moderate periodontitis, but unchanged in severe periodontitis patients. These results suggest that analyzing certain bacterial levels among total oral pathogens may facilitate understanding of the role of periodontal bacteria in the early stages of periodontitis.

Comparison of Osseointegration of Dental Implants Placed in Rabbit Tibia Using Two Dental Laser and Implant Handpiece Systems.

The present study aimed to confirm the usefulness of a multi-laser handpiece system currently under development. Implants were placed in the tibia of rabbits using a conventional separate laser-implant handpiece system (control group; SurgicPro+; NSK, Kanuma, Japan and Epic 10; Biolase, Irvine, CA, USA) and a multi-laser handpiece system (experimental group; BLP 10; Saeshin, Daegu, Korea). Implants were placed in left and right tibias of five rabbits using a conventional laser-implant handpiece system and a multi-laser handpiece system (N = 5 per group). Subsequently, micro-computed tomography (micro-CT; bone-to-implant contact evaluation), implant stability quotient (ISQ) measurement, and histological evaluations were performed to confirm the implant placement results. The independent t-test and the paired t-test were used to compare the ISQ values and the results of the two implant-laser handpiece groups (α = 0.05), respectively. No statistically significant difference in micro-CT, ISQ, and histological evaluations was observed between implant placement by the two systems (p > 0.05) except implant initial stability. The use of the multi-laser handpiece system is expected to produce the same results as a conventional separate laser-implant handpiece system with the higher implant initial stability. Additionally, it will potentially make the clinical environment more pleasant and will provide convenience for the clinicians.

A Comparative Immunohistochemical Study of Wound Healing after Dental Diode Laser Treatment in the Rat Oral Mucosa.

This study aimed to examine the differences in healing patterns using two types of diode laser devices (laser A and laser B) and a steel scalpel for periodontal surgery through histological and immunohistochemical methods. Twenty 12-week-old male rats were assigned to three groups (3, 7, and 14 days). Square-shaped erosion wounds (2 × 2 mm2 diameter) were created on the hard palate of each rat. Two wounds were created using Laser A and a steel scalpel (Bard-Parker No. 15) on the right palate and using Laser B and a steel scalpel on the left side. Rats were sacrificed after 3, 7, and 14 days. Tissues were collected with a margin of 1 mm from the border of the erosional wound of the maxillary hard palate. Histological and immunohistochemical analyses were performed on the tissue samples after 3, 7, and 14 days. The tissue healing pattern and expression of inducible nitric oxide synthase (iNOS) and cluster of differentiation (CD) were observed under a light microscope. Statistical analysis was conducted using the Kruskal−Wallis H test for comparison among the groups (α = 0.05). In comparison to the wounds made with the scalpel, wounds treated with lasers A and B showed delayed healing patterns. There was no significant difference between the two laser treatment groups (p > 0.05). The expression of iNOS and CD68 was not significantly different among the three groups after 3 and 7 days (p > 0.05). On day 14, the groups treated with the dental diode lasers showed higher expression than the group treated with the steel scalpel, but no significant difference was observed (p > 0.05). Laser-induced wounds tended to heal slower than surgical wounds performed using a steel scalpel, but histological and immunohistochemical results showed no significant difference between the dental diode laser and scalpel groups.

Impact of scanning strategy on the accuracy of complete-arch intraoral scans: a preliminary study on segmental scans and merge methods.

PURPOSE: This study investigated the accuracy of full-arch intraoral scans obtained by various scan strategies with the segmental scan and merge methods. MATERIALS AND METHODS: Seventy intraoral scans (seven scans per group) were performed using 10 scan strategies that differed in the segmental scan (1, 2, or 3 segments) and the scanning motion (straight, zigzag, or combined). The three-dimensional (3D) geometric accuracy of scan images was evaluated by comparison with a reference image in an image analysis software program, in terms of the arch shape discrepancies. Measurement parameters were the intermolar distance, interpremolar distance, anteroposterior distance, and global surface deviation. One-way analysis of variance and Tukey honestly significance difference post hoc tests were carried out to compare differences among the scan strategy groups (α = .05). RESULTS: The linear discrepancy values of intraoral scans were not different among scan strategies performed with the single scan and segmental scan methods. In general, differences in the scan motion did not show different accuracies, except for the intermolar distance measured under the scan conditions of a 3-segmental scan and zigzag motion. The global surface deviations were not different among all scan strategies. CONCLUSION: The segmental scan and merge methods using two scan parts appear to be reliable as an alternative to the single scan method for full-arch intraoral scans. When three segmental scans are involved, the accuracy of complete arch scan can be negatively affected.