Characterizing the Microparticles Deposition Structure and its Photonic Nature in Surfactant-Laden Evaporating Colloidal Sessile Droplets.

This work presents a simple method to create photonic microstructures via the natural evaporation of surfactant-laden colloidal sessile droplets on a flat substrate. In the absence of dissolved surfactant, the evaporating colloidal droplet forms a well-known coffee ring deposition. In contrast, the presence of surfactant leads to the formation of multiple ring structures due to the repetitive pinning-depinning behavior of the droplet contact line (CL). It is found that the multiring structure shows vibrant iridescent structural colors while the coffee ring lacks a photonic nature. This difference in the structural color for the presence and absence of the surfactant is found to be dependent on the arrangement of the particles in the deposition structure. The particle arrangement in the multirings is monolayered and well-ordered. The ordering of the particles is strongly influenced by the particle dynamics, contact angle (CA), and CL dynamics of the evaporating colloidal solution droplet. Furthermore, the iridescent nature of the multiring deposition is demonstrated and explained. The dependence of the multiring deposition structure on the concentration of the dissolved surfactant and the suspended particles is also studied. The findings demonstrate that an intermediate surfactant concentration is desirable for the formation of a multiring structure. Further, the pinning-depinning CL dynamics that causes the formation of the multiring deposition structure is discussed. Finally, we demonstrate the applicability of the approach to smaller droplet volumes.

Light-Scattering Analysis of Drying Behavior in Suspension Droplets with Silica and Polystyrene Particles and a Hydrosoluble Polymer.

The coffee-ring structure, which is the final drying pattern of a sessile suspension droplet, is a key factor in controlling the uniformity of the particulate deposits in various coatings. Two light-scattering methods, diffusing wave spectroscopy (DWS) and multispeckle DWS (MSDWS), were used to quantitatively distinguish temporal changes in particle mobility in evaporating suspension droplets containing micrometer-sized silica and polystyrene (PS) particles. The characteristic particle mobility was measured in terms of the mean square displacement in the early stage of drying, and the local particle dynamics around the edge and center regimes of the droplets during drying were analyzed using MSDWS. Hydroxyethyl cellulose (HEC), a hydrosoluble polymer, was added to the silica and PS suspensions to further investigate its role in suppressing or enhancing coffee-ring patterns based on particle-polymer interactions. Consequently, dried microstructures can be directly correlated with real-time drying dynamics, as well as the interactions between solutes by comprehensive light-scattering methods.

Effectiveness of Chin Tuck on Laryngeal Penetration: Quantitative Assessment.

The effectiveness of the chin tuck maneuver is still controversial, despite being widely used in clinical practice. The chin tuck maneuver has been shown to be able to reduce or eliminate aspiration in a group of patients with a number of favorable conditions, but its effectiveness in preventing or managing penetration remains unclear. This study was designed to investigate whether the chin tuck maneuver is effective in reducing penetration. Images from a videofluoroscopic swallowing study (VFSS) taken from 76 patients with penetration were collected and reviewed retrospectively. The severity of penetration was assessed by the penetration ratio (ratio of the penetration depth to the length of the epiglottis) measured and calculated from the images in which the deepest penetration was observed. The penetration ratio was significantly decreased in the chin tuck posture compared with the ratio in the neutral position (p = 0.001). Significant reducing effect was observed in 26 (34.2%) out of 76 patients. When comparing other parameters of VFSS, residues in the vallecular and pyriformis sinuses were less severe in the effective group. Chin tuck significantly decreased residues in both effective and ineffective group. The results demonstrate that the chin tuck maneuver can reduce penetration, but its effectiveness is limited.

Preparation of Low-Diacylglycerol Cocoa Butter Equivalents by Hexane Fractionation of Palm Stearin and Shea Butter.

Herein, we prepared 1,3-dipalmitoyl-2-oleoyl glycerol (POP)-rich fats with reduced levels of diacylglycerols (DAGs), adversely affecting the tempering of chocolate, via two-step hexane fractionation of palm stearin. DAG content in the as-prepared fats was lower than that in POP-rich fats obtained by previously reported conventional two-step acetone fractionation. Cocoa butter equivalents (CBEs) were fabricated by blending the as-prepared fats with 1,3-distearoyl-2-oleoyl glycerol (SOS)-rich fats obtained by hexane fractionation of degummed shea butter. POP-rich fats achieved under the best conditions for the fractionation of palm stearin had a significantly lower DAG content (1.6 w/w%) than that in the counterpart (4.6 w/w%) prepared by the previously reported method. The CBEs fabricated by blending the POP- and SOS-rich fats in a weight ratio of 40:60 contained 63.7 w/w% total symmetric monounsaturated triacylglycerols, including 22.0 w/w% POP, 8.6 w/w% palmitoyl-2-oleoyl-3-stearoyl-rac-glycerol, 33.1 w/w% SOS, and 1.3 w/w% DAGs, which was not substantially different from the DAG content in cocoa butter (1.1 w/w%). Based on the solid-fat content results, it was concluded that, when these CBEs were used for chocolate manufacture, they blended with cocoa butter at levels up to 40 w/w%, without distinctively altering the hardness and melting behavior of cocoa butter.

Activity-Based Protein Profiling Reveals Potential Dasatinib Targets in Gastric Cancer.

Dasatinib is a multi-target kinase inhibitor, whose targets include BCR-ABL, SRC family kinases, and various cancer kinases. The elevated SRC activity in gastric cancer (GC) has prompted the need for the therapeutic application of dasatinib in GC. We observed that the efficacy of dasatinib varied with the GC cell lines. The differential effect of dasatinib was not correlated with the basal SRC activity of each cell line. Moreover, the GC cell lines showing the strong antitumor effects of dasatinib were refractory to other SRC inhibitors, i.e., bosutinib and saracatinib, suggesting that unexpected dasatinib's targets could exist. To profile the targets of dasatinib in GC, we performed activity-based protein profiling (ABPP) via mass spectrometry using a desthiobiotin-ATP probe. We identified 29 and 18 kinases as potential targets in dasatinib-sensitive (SNU-216, MKN-1) and -resistant (SNU-484, SNU-601) cell lines, respectively. The protein-protein interaction mapping of the differential drug targets in dasatinib-sensitive and -resistant GC using the STRING database suggested that dasatinib could target cellular energy homeostasis in the drug-sensitive GC. RNAi screening for identified targets indicated p90RSK could be a novel dasatinib target, which is important for maintaining the viability and motility of GC cells. Further functional validation of dasatinib off-target actions will provide more effective therapeutic options for GC.

Geometric Effects of Colloidal Particles on Stochastic Interface Adsorption.

The stochastic interface adsorption behaviors of ellipsoid particles were investigated using optical laser tweezers. The particles were brought close to the oil-water interface, attempting to attach forcefully to the interface. Multiple attempts of the particle attachments statistically quantified the dependence of the adsorption probability on the particle aspect ratio. It was found that the adsorption probability proportionally increased with the aspect ratio because of the decrease in electrostatic interactions between the charged particles and the charged interface for higher aspect ratio particles. In addition, the adsorption holding time required for the interface attachments was found to increase as the aspect ratio decreased. Notably, the probabilistic adsorption behaviors of the ellipsoid particles and the holding time dependence revealed that the particle adsorption to the interface occurred stochastically, not deterministically. We also demonstrated that the adsorption behaviors measured on a single-particle scale were consistent with the gravity-induced spontaneous adsorption properties performed on a large scale with regard to the nondeterministic adsorption behaviors and the aspect ratio dependence on the adsorption probability.

Heterogeneous Capillary Interactions of Interface-Trapped Ellipsoid Particles Using the Trap-Release Method.

Heterogeneous capillary interactions between ellipsoid particles at the oil-water interface were measured via optical laser tweezers. Two trapped particles were aligned in either tip-to-tip (tt) or side-to-side (ss) configurations via the double-trap method and were released from the optical traps, leading to particle-particle attractions due to the capillary forces caused by quadrupolar interface deformation. On the basis of image analysis and calculations of the Stokes drag force, the capillary interactions between two ellipsoid particles with the same aspect ratio (E) were found to vary with the particle pairs that were measured, indicating that the interactions were nondeterministic or heterogeneous. Heterogeneous capillary interactions could be attributed to undulation of the interface meniscus due to chemical and/or geometric particle heterogeneity. The power law exponent for the capillary interaction Ucap ≈ r-ß was found to be ß ≈ 4 and was independent of the aspect ratio and particle configuration in long-range separations. Additionally, with regard to the tt configuration, the magnitude of the capillary force proportionally increased with the E value (E > 1) when two ellipsoid particles approached each other in the tt configuration.

Shape Measurement of Ellipsoidal Particles in a Cross-Slot Microchannel Utilizing Viscoelastic Particle Focusing.

Shape measurement of nonspherical microparticles by conventional methods such as optical microscopy is challenging owing to particle aggregation or uncertainty regarding the out-of-plane arrangement of particles. In this work, we propose a facile microfluidic method to align particles in-plane utilizing the extensional flow field generated in a cross-slot microchannel. Viscoelastic particle focusing is also harnessed to move particles toward the stagnation point of the cross-slot microchannel. We demonstrate that the shapes of ellipsoidal particles with various aspect ratios can be successfully measured using our novel microfluidic method. This method is expected to be useful in a wide range of applications such as shape measurement of nonspherical cells.

Nanoparticle-Induced Gelation of Bimodal Slurries with Highly Size-Asymmetric Particles: Effect of Surface Chemistry and Concentration.

A systematic study has been performed to investigate the effect of surface potential of nanoparticles on the rheological behavior of bimodal suspensions, using a model system consisting of polystyrene latex (primary size ∼530 nm) and alumina-coated silica (primary size ∼12 nm) particles. The surface potential of small particles was tuned by varying the solution pH, causing them to be repulsive to each other, attractive to each other, and oppositely charged to the large particles, while the large particles remained electrostatically stabilized. We found that the rheological properties could be dramatically changed from viscous to gel-like depending on the surface potential and concentration of small particles. A colloidal gel was induced by small particles when the small particles had the opposite charge to the large particles and a volume fraction of 10(-4) < ϕsmall < 10(-3), and when the small particles were attractive to each other above a critical threshold, ϕsmall > 10(-4). Cryo-SEM distinguished the gel structures to be either short bridging gels produced by oppositely charged small particles or long bridging gels or dense gels produced by attractive small particles. On the basis of this rheological behavior and microstructure, we prepared a phase diagram of highly size-asymmetric bimodal colloids with respect to the surface chemistry and concentration of small particles.

Differences in videofluoroscopic swallowing study (VFSS) findings according to the vascular territory involved in stroke.

Dysphagia affects up to half of stroke patients and increases the risk of pneumonia and fatal outcomes. In order to assess swallowing difficulty, videofluoroscopic swallowing study (VFSS) has traditionally been the gold standard. The purpose of this study was to compare the patterns of post-stroke swallowing difficulties according to the vascular territories involved in the stroke. One hundred and three patients who were diagnosed with first ischemic stroke by brain magnetic resonance imaging and had swallowing difficulty were included in this study. Location of the stroke was classified into three groups: territorial anterior infarcts (TAI) (n = 62), territorial posterior infarcts (TPI) (n = 19) and white matter disease (WMD) (n = 22). Oral cavity residue existed significantly in the TAI group more than in any other groups (P = 0.017). The WMD group showed more residue in the valleculae (P = 0.002) and the TPI group showed more residue in the pyriform sinuses (P = 0.001). The oral transit time, pharyngeal delay time and pharyngeal transit time did not show significant differences among the groups with swallowing of both thick and thin liquids. Penetration and aspiration were more frequent in the TPI group (P < 0.05) with swallowing of both thick and thin liquids. The results suggest that TAI is more related to oral phase dysfunction and TPI is more related to pharyngeal dysfunction. In ischemic stroke, patterns of swallowing difficulty may differ according to the vascular territory involved and this should be considered in the management of post-stroke dysphagia.

Chin tuck for prevention of aspiration: effectiveness and appropriate posture.

Chin tuck has been has been widely used to prevent aspiration in the patients with dysphagia. This study was performed to investigate the effectiveness and the degree of optimal neck flexion of chin tuck. Ninety-seven patients who showed aspiration in the videofluoroscopic swallow study (VFSS). Participants were grouped into the effective (patients who showed effect with chin tuck) and ineffective group (those who did not show effect with chin tuck). VFSS was performed in neutral and chin tuck position and findings were compared between the groups. Severity of aspiration was assessed by the point penetration-aspiration scale. Duration of dysphagic symptoms, history of tracheostomy, and other possible contributing factors were also compared. Neck flexion angle was measured to find appropriate posture in which aspiration was prevented with chin tuck. Aspiration was reduced or eliminated in only 19 patients (19.6 %) with chin tuck. Oral transit time, pharyngeal delayed time and pharyngeal transit time were significantly shortened in both groups (p < 0.05), but the difference between the groups was not significant. Female sex and absence of residue in pyriform sinus favored the effect of chin tuck (p < 0.05). At least 17.5° of neck flexion was required to achieve an effect with chin tuck. The effectiveness of chin tuck was less than anticipated. Patients without residue in pyriform sinus were more likely to benefit from chin tuck. Sufficient neck flexion was important in chin tuck to prevent aspiration.

Correction to "Electrical and Thermal Properties of Surface-Modified Copper Nanowire/Polystyrene Nanocomposites through Latex Blending".

[This corrects the article DOI: 10.1021/acsomega.3c06775.].

Acoustofluidic separation of prolate and spherical micro-objects.

Most microfluidic separation techniques rely largely on object size as a separation marker. The ability to separate micro-objects based on their shape is crucial in various biomedical and chemical assays. Here, we develop an on-demand, label-free acoustofluidic method to separate prolate ellipsoids from spherical microparticles based on traveling surface acoustic wave-induced acoustic radiation force and torque. The freely rotating non-spherical micro-objects were aligned under the progressive acoustic field by the counterrotating radiation torque, and the major axis of the prolate ellipsoids was parallel to the progressive wave propagation. The specific alignment of the ellipsoidal particles resulted in a reduction in the cross-sectional area perpendicular to the wave propagation. As a consequence, the acoustic backscattering decreased, resulting in a decreased magnitude of the radiation force. Through the variation in radiation force, which depended on the micro-object morphology enabled the acoustofluidic shape-based separation. We conducted numerical simulations for the wave scattering of spherical and prolate objects to elucidate the working mechanism underlying the proposed method. A series of experiments with polystyrene microspheres, prolate ellipsoids, and peanut-shaped microparticles were performed for validation. Through quantitative analysis of the separation efficiency, we confirmed the high purity and high recovery rate of the proposed acoustofluidic shape-based separation of micro-objects. As a bioparticle, we utilize Thalassiosira eccentrica to perform shape-based separation, as the species has a variety of potential applications in drug delivery, biosensing, nanofabrication, bioencapsulation and immunoisolation.

Electromagnetic Interference Shielding Properties of Highly Flexible Poly(styrene-co-butyl acrylate)/PEDOT:PSS Films Fabricated by Latex Technology.

As the use of stretchable electronic devices increases, the importance of flexible electromagnetic interference (EMI) shielding films is emerging. In this study, a highly flexible shielding film was fabricated using poly(styrene-co-butyl acrylate) (p(St-co-BA)) latex as a matrix and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a conductive filler, and then the mechanical properties and EMI shielding performance of the film were examined. Styrene and butyl acrylate were copolymerized to lower the high glass transition temperature and increase the ductility of brittle polystyrene. The latex blending technique was used to produce a shielding film in which the aqueous filler dispersion was uniformly dispersed in the emulsion polymerized resin. To determine the phase change in the copolymer matrix with temperature, the storage modulus was measured, and a time-temperature superposition master curve was constructed. The drying temperature of water-based copolymer resin suitable for film fabrication was set based on this curve. The glass transition temperature and flexibility of the blends were determined by evaluating the thermomechanical analysis and tensile tests. The EMI shielding effectiveness (SE) of the films was analyzed at frequencies from 50 MHz to 1.5 GHz, covering the VHF and UHF ranges. As the filler content increased, the SE of the blend film increased, but the elongation increased until a certain content and then decreased. The optimal content of PEDOT:PSS that satisfied both the ductility and shielding performance of the film was found to be 10 wt%. In this case, the elongation at break reached 300%, and the SE of a 1.6 mm thick film was about 35 dB. The film developed in this study can be used as an EMI shielding material that requires high flexibility.

Immobilized Candida antarctica lipase B as an sn-1,3 regiospecific biocatalyst for the interesterification of triacylglycerols with fatty acid ethyl esters.

Candida antarctica lipase B (CALB) is regarded as non-regiospecific. This study aimed to investigate the regiospecificity of CALB in the solvent-free interesterification of high-oleic sunflower oil with stearic acid ethyl ester for 1,3-distearoyl-2-oleoylglycerol (SOS)-rich fat preparation using a packed bed reactor. The content ratio of 1,2-distearoyl-3-oleoylglycerol (SSO) to SOS (denoted by SSO/SOS content) obtained using Lipozyme 435 (a commercially immobilized CALB; 0-4.1%), at residence times (1-32 min) was similar to that obtained using Lipozyme RM IM (0-3.0%), but lower than that obtained using Lipozyme TL IM (6.0-39.4%). When immobilized on Lewatit VP OC 1600, Lipozyme CALB had an SSO/SOS content of 0-10.4%, which was greater than that of Palatase 20,000 L (0-1.1%) but was lower than that of Lipozyme TL 100 L (8.8-97.7%). Our findings suggest that immobilized CALB shows distinct sn-1,3 regiospecificity in the interesterification of triacylglycerol with fatty acid ethyl esters.

Integrated Machine Learning Approach for the Early Prediction of Pressure Ulcers in Spinal Cord Injury Patients.

(1) Background: Pressure ulcers (PUs) substantially impact the quality of life of spinal cord injury (SCI) patients and require prompt intervention. This study used machine learning (ML) techniques to develop advanced predictive models for the occurrence of PUs in patients with SCI. (2) Methods: By analyzing the medical records of 539 patients with SCI, we observed a 35% incidence of PUs during hospitalization. Our analysis included 139 variables, including baseline characteristics, neurological status (International Standards for Neurological Classification of Spinal Cord Injury [ISNCSCI]), functional ability (Korean version of the Modified Barthel Index [K-MBI] and Functional Independence Measure [FIM]), and laboratory data. We used a variety of ML methods-a graph neural network (GNN), a deep neural network (DNN), a linear support vector machine (SVM_linear), a support vector machine with radial basis function kernel (SVM_RBF), K-nearest neighbors (KNN), a random forest (RF), and logistic regression (LR)-focusing on an integrative analysis of laboratory, neurological, and functional data. (3) Results: The SVM_linear algorithm using these composite data showed superior predictive ability (area under the receiver operating characteristic curve (AUC) = 0.904, accuracy = 0.944), as demonstrated by a 5-fold cross-validation. The critical discriminators of PU development were identified based on limb functional status and laboratory markers of inflammation. External validation highlighted the challenges of model generalization and provided a direction for future research. (4) Conclusions: Our study highlights the importance of a comprehensive, multidimensional data approach for the effective prediction of PUs in patients with SCI, especially in the acute and subacute phases. The proposed ML models show potential for the early detection and prevention of PUs, thus contributing substantially to improving patient care in clinical settings.

Fast dynamics and relaxation of colloidal drops during the drying process using multispeckle diffusing wave spectroscopy.

The fast dynamics generated by the Brownian motion of particles in colloidal drops, and the related relaxation during drying, which play key roles in suspension systems, were investigated incorporating multispeckle diffusing wave spectroscopy (MSDWS). MSDWS equipment was implemented to analyze the relaxation properties of suspensions under a nonergodic and nonstationary drying process, which cannot be elucidated by conventional light scattering methods, such as dynamic light scattering and diffusing wave spectroscopy. Rapid particle movement can be identified by the characteristic relaxation time, which is closely related to the Brownian motion due to thermal fluctuations of the particles. In the compacting stage of the drying process, the characteristic relaxation time increased gradually with the drying time because the particles in the colloidal drop were constrained by themselves. Moreover, variations of the initial concentration and particle size considerably affected the complete drying time and characteristic relaxation time, producing a shorter relaxation time for a low concentrated suspension with small particles.

Electrical and Thermal Properties of Surface-Modified Copper Nanowire/Polystyrene Nanocomposites through Latex Blending.

The incorporation of conductive nanofillers into an insulating polymer matrix commonly leads to nanocomposites with good electrical, thermal, and mechanical properties. In this study, copper nanowires (CuNWs) and polystyrene (PS) microspheres were synthesized along with the fabrication of CuNW/PS polymer nanocomposites. The electrical, thermal, mechanical, rheological, and morphological properties of the CuNW/PS nanocomposites were examined. The CuNWs were homogeneously dispersed in the PS matrix through latex blending. For the CuNW/PS nanocomposites, the storage modulus was higher than the loss modulus at all frequencies, indicating their elastic-dominant behavior. The electrical and thermal conductivities of the nanocomposites increased with an increasing CuNW content. Using a mixed dispersion of two monodisperse PS particles of 500 nm and 5 µm in diameter resulted in the highest electrical conductivity (ca. 10° S/m for 30 wt % nanofillers) among the nanocomposites. In addition, the introduction of silica- and polydopamine-coated CuNWs as nanofillers imparted insulation properties to the nanocomposites, with electrical conductivities to 10-10-10-8 S/m. When using 500 nm PS particles, the thermal conductivity of the surface-modified CuNW/PS nanocomposite at 30 wt % of CuNW was enhanced to 0.22 W/m·K compared to 0.17 W/m·K for its unmodified counterpart. We have achieved multiple innovative approaches, including the use of mixed particle sizes, surface modification of CuNW, and the exploration of elastic-dominant behavior. This enhanced thermal conductivity, coupled with the attainment of insulation properties, presents a distinct advantage for thermal interface material (TIM) applications.

Clinical Practice Guideline for Stroke Rehabilitation in Korea-Part 1: Rehabilitation for Motor Function (2022).

This clinical practice guideline (CPG) is the fourth edition of the Korean guideline for stroke rehabilitation, which was last updated in 2016. The development approach has been changed from a consensus-based approach to an evidence-based approach using the Grading of Recommendations Assessment Development and Evaluation (GRADE) method. This change ensures that the guidelines are based on the latest and strongest evidence available. The aim is to provide the most accurate and effective guidance to stroke rehabilitation teams, and to improve the outcomes for stroke patients in Korea. Fifty-five specialists in stroke rehabilitation and one CPG development methodology expert participated in this development. The scope of the previous clinical guidelines was very extensive, making it difficult to revise at once. Therefore, it was decided that the scope of this revised CPG would be limited to Part 1: Rehabilitation for Motor Function. The key questions were selected by considering the preferences of the target population and referring to foreign guidelines for stroke rehabilitation, and the recommendations were completed through systematic literature review and the GRADE method. The draft recommendations, which were agreed upon through an official consensus process, were refined after evaluation by a public hearing and external expert evaluation.

Cell stretching measurement utilizing viscoelastic particle focusing.

We present an efficient method for measuring cell stretching based on three-dimensional viscoelastic particle focusing. We suspended cells in a biocompatible viscoelastic medium [poly(vinylpyrrolidone) solution in phosphate-buffered saline]. The medium viscoelasticity significantly homogenized the trajectories of cells along the centerline of a simple straight channel, which could not be achieved in conventional Newtonian media. More than 95% of red blood cells (RBCs) were successfully delivered to the stagnation point of a cross-slot microchannel and stretched by extensional flow. By computational simulations, we proved that this method prevents inaccuracies due to random lateral distributions of cells and, further, guarantees rotational-free cell stretching along the shear-free channel centerline. As a demonstration, we characterized the differences in RBC deformabilities among various heat treatments. Furthermore, we monitored the decrease of deformability due to nutrient starvation in human mesenchymal stem cells. We envisage that our novel method can be extended to versatile applications such as the detection of pathophysiological evolution in impaired RBCs due to malaria or diabetes and the monitoring of cell quality in stem cell therapeutics.