Recent progress and prospects of dimer and multimer acceptors for efficient and stable polymer solar cells.

High power conversion efficiency (PCE) and long-term stability are essential prerequisites for the commercialization of polymer solar cells (PSCs). Small-molecule acceptors (SMAs) are core materials that have led to recent, rapid increases in the PCEs of the PSCs. However, a critical limitation of the resulting PSCs is their poor long-term stability. Blend morphology degradation from rapid diffusion of SMAs with low glass transition temperatures (Tgs) is considered the main cause of the poor long-term stability of the PSCs. The recent emergence of oligomerized SMAs (OSMAs), composed of two or more repeating SMA units (i.e., dimerized and trimerized SMAs), has shown great promise in overcoming these challenges. This innovation in material design has enabled OSMA-based PSCs to reach impressive PCEs near 19% and exceptional long-term stability. In this review, we summarize the evolution of OSMAs, including their research background and recent progress in molecular design. In particular, we discuss the mechanisms for high PCE and stability of OSMA-based PSCs and suggest useful design guidelines for high-performance OSMAs. Furthermore, we reflect on the existing hurdles and future directions for OSMA materials towards achieving commercially viable PSCs with high PCEs and operational stabilities.

The Root Extract of Rosa multiflora Ameliorates Nonalcoholic Steatohepatitis Development via Blockade of De Novo Lipogenesis and Inflammation.

Nonalcoholic steatohepatitis (NASH) is characterized by severe inflammation and fibrosis due to an excessive accumulation of triglycerides (TGs) in the liver with a dysregulated de novo lipogenesis (DNL) pathway. In this study, we aimed to evaluate the effectiveness of YC-1102, an extract obtained from the roots of Rosa multiflora, as a nutritional supplement in a diet-induced NASH mouse model. C57BL/6 wild-type mice were fed a fructose, palmitate, and cholesterol (FPC)-containing diet for 16 weeks to induce experimental NASH. A daily oral gavage of YC-1102 and obetichoic acid (OCA) was conducted for 9 weeks. After sacrifice, disease parameters related to hepatic lipids, inflammation, and fibrosis were evaluated. The treatment with YC-1102 significantly decreased the liver/body weight ratio, epididymal fat weight, and plasma ALT and AST levels, which are indicators of NASH injuries. YC-1102 attenuated hepatic lipid accumulation by inhibiting the transcription of DNL genes in the livers exhibiting NASH. Additionally, we found that YC-1102 blocked the development of hepatic inflammation and fibrosis by directly disturbing macrophage activation, resulting in an amelioration of hepatic fibrosis. Our findings suggest that YC-1102 could ameliorate NASH progression by inhibiting uncontrolled DNL and inflammation.

Nickel Oxide Hole Injection Layers for Balanced Charge Injection in Quantum Dot Light-Emitting Diodes.

Quantum dot (QD) light-emitting diodes (QLEDs) are promising for next-generation displays, but suffer from carrier imbalance arising from lower hole injection compared to electron injection. A defect engineering strategy is reported to tackle transport limitations in nickel oxide-based inorganic hole-injection layers (HILs) and find that hole injection is able to enhance in high-performance InP QLEDs using the newly designed material. Through optoelectronic simulations, how the electronic properties of NiOx affect hole injection efficiency into an InP QD layer, finding that efficient hole injection depends on lowering the hole injection barrier and enhancing the acceptor density of NiOx is explored. Li doping and oxygen enriching are identified as effective strategies to control intrinsic and extrinsic defects in NiOx, thereby increasing acceptor density, as evidenced by density functional theory calculations and experimental validation. With fine-tuned inorganic HIL, InP QLEDs exhibit a luminance of 45 200 cd m-2 and an external quantum efficiency of 19.9%, surpassing previous inorganic HIL-based QLEDs. This study provides a path to designing inorganic materials for more efficient and sustainable lighting and display technologies.

The residue of salinomycin in the muscles of olive flounder (Paralichthys olivaceus) and black rockfish (Sebastes Schlegeli) after oral administration analyzed by LC-Tandem-MS.

BACKGROUND: Salinomycin, an antibiotic, have potential as a veterinary drug for fish due to its anti-parasitic activity against several fish parasites. Thus the residual levels of salinomycin in muscles of two significant aquaculture species in Korea, olive flounder and black rockfish, were analyzed using HPLC-MS-MS. RESULTS: The proper method to analyze the residual salinomycin in fish muscles using LC-MS-MS was settled and the method was validated according to CODEX guidelines. The residues in three distinct groups for two fish species were analyzed using the matrix match calibration curves at points of five different times following oral administration. After oral administration, salinomycin rapidly breaks down in both olive flounder and black rockfish. After 7th days, the average residue in all groups of two fish spp. decreased below limit of quantitation (LOQ). CONCLUSION: Due to low residue levels in fish muscles, salinomycin may therefore be a treatment that is safe for both fish and humans. This result could contribute to establishment of MRL (minimal residual limit) for approval of salinomycin for use in aquaculture.

Morphology and Performance Enhancement through the Strong Passivation Effect of Amphoteric Ions in Tin-based Perovskite Solar Cells.

Despite the optoelectronic similarities between tin and lead halide perovskites, the performance of tin-based perovskite solar cells remains far behind, with the highest reported efficiency to date being ≈14%. This is highly correlated to the instability of tin halide perovskite, as well as the rapid crystallization behavior in perovskite film formation. In this work, l-Asparagine as a zwitterion plays a dual role in controlling the nucleation/crystallization process and improving the morphology of perovskite film. Furthermore, tin perovskites with l-Asparagine show more favorable energy-level matching, enhancing the charge extraction and minimizing the charge recombination, leading to an enhanced power conversion efficiency of 13.31% (from 10.54% without l-Asparagine) with remarkable stability. These results are also in good agreement with the density functional theory calculations. This work not only provides a facile and efficient approach to controlling the crystallization and morphology of perovskite film but also offers guidelines for further improved performance of tin-based perovskite electronic devices.

Energy-Efficient AP Selection Using Intelligent Access Point System to Increase the Lifespan of IoT Devices.

With the emergence of various Internet of Things (IoT) technologies, energy-saving schemes for IoT devices have been rapidly developed. To enhance the energy efficiency of IoT devices in crowded environments with multiple overlapping cells, the selection of access points (APs) for IoT devices should consider energy conservation by reducing unnecessary packet transmission activities caused by collisions. Therefore, in this paper, we present a novel energy-efficient AP selection scheme using reinforcement learning to address the problem of unbalanced load that arises from biased AP connections. Our proposed method utilizes the Energy and Latency Reinforcement Learning (EL-RL) model for energy-efficient AP selection that takes into account the average energy consumption and the average latency of IoT devices. In the EL-RL model, we analyze the collision probability in Wi-Fi networks to reduce the number of retransmissions that induces more energy consumption and higher latency. According to the simulation, the proposed method achieves a maximum improvement of 53% in energy efficiency, 50% in uplink latency, and a 2.1-times longer expected lifespan of IoT devices compared to the conventional AP selection scheme.

An Energy-Efficient Multi-Level Sleep Strategy for Periodic Uplink Transmission in Industrial Private 5G Networks.

This paper proposes an energy-efficient multi-level sleep mode control for periodic transmission (MSC-PUT) in private fifth-generation (5G) networks. In general, private 5G networks meet IIoT requirements but face rising energy consumption due to dense base station (BS) deployment, particularly impacting operating expenses (OPEX). An approach of BS sleep mode has been studied to reduce energy consumption, but there has been insufficient consideration for the periodic uplink transmission of industrial Internet of Things (IIoT) devices. Additionally, 5G New Reno's synchronization signal interval limits the effectiveness of the deepest sleep mode in reducing BS energy consumption. By addressing this issue, the aim of this paper is to propose an energy-efficient multi-level sleep mode control for periodic uplink transmission to improve the energy efficiency of BSs. In advance, we develop an energy-efficient model that considers the trade-off between throughput impairment caused by increased latency and energy saving by sleep mode operation for IIoT's periodic uplink transmission. Then, we propose an approach based on proximal policy optimization (PPO) to determine the deep sleep mode of BSs, considering throughput impairment and energy efficiency. Our simulation results verify the proposed MSC-PUT algorithm's effectiveness in terms of throughput, energy saving, and energy efficiency. Specifically, we verify that our proposed MSC-PUT enhances energy efficiency by nearly 27.5% when compared to conventional multi-level sleep operation and consumes less energy at 75.21% of the energy consumed by the conventional method while incurring a throughput impairment of nearly 4.2%. Numerical results show that the proposed algorithm can significantly reduce the energy consumption of BSs accounting for periodic uplink transmission of IIoT devices.

Effects of Guiding Ground Rules and Individual Differences on the Accuracy of Children's Free Recall and Suggestibility.

This research examines how the presence or absence of ground rules and children's temperamental tendencies affect children's free recall accuracy and suggestibility. Participating children showed richer free recall with open-ended questions and displayed greater resistance to suggestive questions when provided ground rules during the interview. In addition, children's recall accuracy varied based on their prosocial orientation: the presence or absence of ground rules influenced memory accuracy more in children with a low prosocial orientation than in those with a high prosocial orientation. These results demonstrate the importance of ground rules for obtaining reliable statements from children during investigative interviews. Findings further suggest that children can provide more detailed information when temperamental characteristics (e.g. prosocial tendencies) are considered.

Wide-Bandgap Perovskite Quantum Dots in Perovskite Matrix for Sky-Blue Light-Emitting Diodes.

The epitaxial growth of a perovskite matrix on quantum dots (QDs) has enabled the emergence of efficient red light-emitting diodes (LEDs) because it unites efficient charge transport with strong surface passivation. However, the synthesis of wide-band gap (Eg) QD-in-matrix heterostructures has so far remained elusive in the case of sky-blue LEDs. Here, we developed CsPbBr3 QD-in-perovskite matrix solids that enable high luminescent efficiency and spectral stability with an optical Eg of over 2.6 eV. We screened alloy candidates that modulate the perovskite Eg and allow heteroepitaxy, seeking to implement lattice-matched type-I band alignment. Specifically, we introduced a CsPb1-xSrxBr3 matrix, in which alloying with Sr2+ increased the Eg of the perovskite and minimized lattice mismatch. We then developed an approach to passivation that would overcome the hygroscopic nature of Sr2+. We found that bis(4-fluorophenyl)phenylphosphine oxide strongly coordinates with Sr2+ and provides steric hindrance to block H2O, a finding obtained by combining molecular dynamics simulations with experimental results. The resulting QD-in-matrix solids exhibit enhanced air- and photo-stability with efficient charge transport from the matrix to the QDs. LEDs made from this material exhibit an external quantum efficiency of 13.8% and a brightness exceeding 6000 cd m-2.

Dipole Engineering through the Orientation of Interface Molecules for Efficient InP Quantum Dot Light-Emitting Diodes.

InP-based quantum dot (QD) light-emitting diodes (QLEDs) provide a heavy-metal-free route to size-tuned LEDs having high efficiency. The stability of QLEDs may be enhanced by replacing organic hole-injection layers (HILs) with inorganic layers. However, inorganic HILs reported to date suffer from inefficient hole injection, the result of their shallow work functions. Here, we investigate the tuning of the work function of nickel oxide (NiOx) HILs using self-assembled molecules (SAMs). Density functional theory simulations and near-edge X-ray absorption fine structure put a particular focus onto the molecular orientation of the SAMs in tuning the work function of the NiOx HIL. We find that orientation plays an even stronger role than does the underlying molecular dipole itself: SAMs having the strongest electron-withdrawing nitro group (NO2), despite having a high intrinsic dipole, show limited work function tuning, something we assign to their orientation parallel to the NiOx surface. We further find that the NO2 group─which delocalizes electrons over the molecule by resonance─induces a deep lowest unoccupied molecular orbital level that accepts electrons from QDs, producing luminescence quenching. In contrast, SAMs containing a trifluoromethyl group exhibit an angled orientation relative to the NiOx surface, better activating hole injection into the active layer without inducing luminescence quenching. We report an external quantum efficiency (EQE) of 18.8%─the highest EQE among inorganic HIL-based QLEDs (including Cd-based QDs)─in InP QLEDs employing inorganic HILs.

Reproductive and developmental toxicity screening of bisphenol F by oral gavage in rats.

Bisphenol F (BPF, 4,4'-methylenediphenol) has recently been selected as an alternative to bisphenol A (BPA), which is used in the manufacturing of polycarbonates and epoxy resins. This study aimed to investigate the general, and reproductive/developmental effects of BPF. Therefore, BPF at dose levels of 0, 1, 5, 20, and 100 mg/kg/day was administered daily by oral gavage to Sprague-Dawley rats during the pre-mating, mating, gestation, and early lactation periods, and reproductive and developmental toxicities including general systemic toxicities were investigated. A decrease in body weight and food consumption was observed in the female rats treated with BPF at 20 and 100 mg/kg/day during the pre-mating and gestation periods. Additionally, gamma glutamyl transpeptidase levels were increased in the female rats administered 100 mg/kg/day. At 100 mg/kg/day, ovarian weight decreased and vaginal mucification increased according to a necropsy and histopathological examination, respectively. Moreover, the number of implantation sites and litter size decreased at 100 mg/kg/day. However, no significant BPF-related changes were observed in the male rats. Based on the results of this study, the no-observed-adverse-effect levels (NOAELs) of BPF for general systemic and reproductive effects were 5 and 20 mg/kg/day, respectively.

Prenatal developmental toxicity study of 2,4-dichlorobenzyl alcohol in rats.

Sore throat lozenges, which are over-the-counter drugs, contain 2,4-dichlorobenzyl alcohol (DCBA) as the primary ingredient. However, comprehensive data on the prenatal developmental toxicity of DCBA is limited. Therefore, this study was conducted to determine the effects of DCBA on pregnant rats and prenatal development. Sprague-Dawley rats were administered different doses of DCBA (0, 25, 100, 400, and 800 mg/kg/day) daily via an oral gavage from gestation day (GD) 6-19. Thereafter, all the live dams were sacrificed on GD 20, and caesarean sections were conducted. Live fetuses and their placenta were weighed and then examined for external, visceral, and skeletal malformations and variations. Based on the results obtained, dams at 800 mg/kg/day showed systemic toxicities, including a decrease in body weight and food consumption, and liver changes. Additionally, this treatment induced decreases in fetal and placental weights, as well as the increased incidence of retarded ossifications and full supernumery rib, and the decreased number of ossification centers. Therefore, based on these findings, the no-observed-adverse-effect level of DCBA was determined to be 400 mg/kg/day for dams and prenatal development.

Bisphenol A impairs renal function by reducing Na+/K+-ATPase and F-actin expression, kidney tubule formation in vitro and in vivo.

The kidney proximal tubule is responsible for reabsorbing water and NaCl to maintain the homeostasis of the body fluids, electrolytes, and nutrients. Thus, abnormal functioning of the renal proximal tubule can lead to life-threatening imbalances. Bisphenol A (BPA) has been used for decades as a representative chemical in household plastic products, but studies on its effects on the kidney proximal tubule are insufficient. In this study, immunocytochemical and cytotoxicity tests were performed using two- and three-dimensional human renal proximal tubular epithelial cell (hRPTEC) cultures to investigate the impact of low-dose BPA (1-10 µM) exposure. BPA was found to interfere with straight tubule formation as observed by low filamentous actin formation and reduced Na+/K+-ATPase expression in the tubules of hRPTEC 3D cultures. Similar results were observed in rat pup kidneys following oral administration of 250 mg/kg BPA. Moreover, the expression of HO-1 and 8-OHdG, key markers for oxidative stress, was increased in vitro and in vivo following BPA administration, whereas that of OAT1 and OAT, important transporters of the renal proximal tubules, was not altered. Overall, no-observed-adverse-effect-level (NOAEL)-dose BPA exposure can decrease renal function by promoting abnormal tubular formation both in vitro and in vivo. Therefore, we propose that although it does not exhibit life-threatening toxicity, exposure to low levels of BPA can negatively affect homeostasis in the body by means of long-term deterioration of renal proximal tubular function in humans.

Ligand Exchange at a Covalent Surface Enables Balanced Stoichiometry in III-V Colloidal Quantum Dots.

III-V colloidal quantum dots (CQDs) are promising semiconducting materials for optoelectronic applications; however, their strong covalent character requires a distinct approach to surface management compared with widely investigated II-VI and IV-VI CQDs-dots, which by contrast are characterized by an ionic nature. Here we show stoichiometric reconstruction in InAs CQDs by ligand exchange. In particular, we find that indium-carboxylate ligands, which passivate as-synthesized InAs CQDs and are responsible for In-rich surfaces, can be replaced by anionic ligands such as thiols. This enables the production of inks consisting of balanced-stoichiomety CQDs; this is distinct from what is observed in II-VI and IV-VI CQDs, in which thiols replace carboxylates. The approach enables the implementation of InAs CQD solids as the active layer in photodiode detectors that exhibit an external quantum efficiency of 36% at 930 nm and a photoresponse time of 65 ns, which is 4 times shorter than that of reference PbS CQD devices.

Bright and Stable Light-Emitting Diodes Based on Perovskite Quantum Dots in Perovskite Matrix.

Light-emitting diodes (LEDs) based on metal halide perovskite quantum dots (QDs) have achieved impressive external quantum efficiencies; however, the lack of surface protection of QDs, combined with efficiency droop, decreases device operating lifetime at brightnesses of interest. The epitaxial incorporation of QDs within a semiconducting shell provides surface passivation and exciton confinement. Achieving this goal in the case of perovskite QDs remains an unsolved challenge in view of the materials' chemical instability. Here, we report perovskite QDs that remain stable in a thin layer of precursor solution of perovskite, and we use strained QDs as nucleation centers to drive the homogeneous crystallization of a perovskite matrix. Type-I band alignment ensures that the QDs are charge acceptors and radiative emitters. The new materials show suppressed Auger bi-excition recombination and bright luminescence at high excitation (600 W cm-2), whereas control materials exhibit severe bleaching. Primary red LEDs based on the new materials show an external quantum efficiency of 18%, and these retain high performance to brightnesses exceeding 4700 cd m-2. The new materials enable LEDs having an operating half-life of 2400 h at an initial luminance of 100 cd m-2, representing a 100-fold enhancement relative to the best primary red perovskite LEDs.

Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells.

All-polymer solar cells (all-PSCs) consisting of polymer donors (PDs) and polymer acceptors (PAs) have drawn tremendous research interest in recent years. It is due to not only their tunable optical, electrochemical, and structural properties, but also many superior features that are not readily available in conventional polymer-fullerene solar cells (fullerene-PSCs) including long-term stability, synthetic accessibility, and excellent film-forming properties suitable for large-scale manufacturing. Recent breakthroughs in material design and device engineering have driven the power conversion efficiencies (PCEs) of all-PSCs exceeding 11%, which is comparable to the performance of fullerene-PSCs. Furthermore, outstanding mechanical durability and stretchability have been reported for all-PSCs, which make them stand out from the other small molecule-based PSCs as a promising power supplier for wearable electronic devices. This review provides a comprehensive overview of the important work in all-PSCs, in which pertinent examples are deliberately chosen. First, we describe the key components that enabled the recent progresses of all-PSCs including rational design rules for efficient PDs and PAs, blend morphology control, and light harvesting engineering. We also review the recent work on the understanding of the stability of all-PSCs under various external conditions, which highlights the importance of all-PSCs for future implementation and commercialization. Finally, because all-PSCs have not yet achieved their full potential and are still undergoing rapid development, we offer our views on the current challenges and future prospects.

Serial blood sampling effects in rat embryo-fetal development studies for toxicokinetics.

Serial blood sampling for toxicokinetics is generally conducted in regulatory embryo-fetal development (EFD) studies in rats. EFD studies are designed to detect the potential adverse effects of pharmaceuticals on pregnant females and their fetuses; this information is useful for understanding the relationships between systemic exposure levels and toxicity profiles. However, additional satellite pregnant females are needed for toxicokinetics because comprehensive information regarding the potential impact of serial blood sampling on pregnant females is scarce. Here, in this study, we investigated the potential impact of serial blood sampling in pregnant female rats using a typical EFD study design. Additionally, we investigated the additional endpoints (clinical pathology, organ weights, and histopathology) that were deemed likely to be sensitive to blood sampling. Results indicated that serial blood sampling in pregnant females induced physiological adaptive changes and did not affect the general endpoints in EFD studies. Nevertheless, inclusion of satellite groups in EFD studies may be a more prudent approach considering the physiological changes in pregnant females and potential off-target effects of candidate pharmaceuticals. These results provide background information on the impact of serial blood sampling in pregnant females and will be useful to design the regulatory EFD studies.

Design of a Wideband Tonpilz Transducer Comprising Non-Uniform Piezoceramic Stacks with Equivalent Circuits.

Tonpilz transducers are desirable for their superior performance in underwater target detection and communication applications. Several design schemes to widen their bandwidth have been reported, but these schemes often involve a complex structure or arrangement of additional components. In this study, a simple design is proposed to improve the bandwidth of a multimode Tonpilz transducer by using a non-uniform drive section that consists of piezoelectric stacks of various thicknesses. The efficacy of the design is illustrated with a multimode Tonpilz transducer having three lead zirconate titanate (PZT) stacks of different thicknesses. A new equivalent circuit was developed to analyze the frequency response of the transducer incorporating the non-uniform drive section and was used for rigorous analysis of the effects of varying the position and thickness of the non-uniform stacks on the transmitting characteristics of the transducer. The validity of the design was verified through the fabrication and characterization of a prototype multimode Tonpilz transducer. The developed structure can be readily extended to an arbitrary number of stacks in the Tonpilz transducer with any number of PZT disks in each stack.

GPR55 Antagonist CID16020046 Protects against Atherosclerosis Development in Mice by Inhibiting Monocyte Adhesion and Mac-1 Expression.

GPR55 recognizes several lipid molecules such as lysophosphatidylinositol. GPR55 expression was reported in human monocytes. However, its role in monocyte adhesion and atherosclerosis development has not been studied. The role of GPR55 in monocyte adhesion and atherosclerosis development was investigated in human THP-1 monocytes and ApoE-/- mice using O-1602 (a potent agonist of GPR55) and CID16020046 (a specific GPR55 antagonist). O-1602 treatment significantly increased monocyte adhesion to human umbilical vein endothelial cells, and the O-1602-induced adhesion was inhibited by treatment with CID16020046. O-1602 induced the expression of Mac-1 adhesion molecules, whereas CID16020046 inhibited this induction. Analysis of the promoter region of Mac-1 elucidated the binding sites of AP-1 and NF-κB between nucleotides -750 and -503 as GPR55 responsive elements. O-1602 induction of Mac-1 was found to be dependent on the signaling components of GPR55, that is, Gq protein, Ca2+, CaMKK, and PI3K. In Apo-/- mice, administration of CID16020046 ameliorated high-fat diet-induced atherosclerosis development. These results suggest that high-fat diet-induced GPR55 activation leads to the adhesion of monocytes to endothelial cells via induction of Mac-1, and CID16020046 blockage of GPR55 could suppress monocyte adhesion to vascular endothelial cells through suppression of Mac-1 expression, leading to protection against the development of atherosclerosis.

Establishment of Three-Dimensional Bioprinted Bladder Cancer-on-a-Chip with a Microfluidic System Using Bacillus Calmette-Guérin.

Immunotherapy of bladder cancer is known to have favorable effects, although it is difficult to determine which patients will show a good response because of the different tumor microenvironments (TME). Here, we developed a bladder cancer-on-a-chip (BCOC) to mimic the TME using three-dimensional (3D) bioprinting and microfluidic technology. We fabricated a T24 and a 5637-cell line-based BCOC that also incorporated MRC-5, HUVEC, and THP-1 cells. We evaluated the effects of TME and assessed the immunologic reactions in response to different concentrations of Bacillus Calmette-Guérin (BCG) via live/dead assay and THP-1 monocytic migration, and concentrations of growth factors and cytokines. The results show that cell viability was maintained at 15% filling density in circle-shaped cell constructs at 20 µL/min microfluidic flow rate. A 3D co-culture increased the proliferation of BCOCs. We found that the appropriate time to evaluate the viability of BCOC, concentration of cytokines, and migration of monocytes was 6 h, 24 h, and three days after BGC treatment. Lastly, the immunotherapeutic effects of BCOC increased according to BCG dosage. To predict effects of immunotherapeutic agent in bladder cancer, we constructed a 3D bioprinted BCOC model. The BCOC was validated with BCG, which has been proven to be effective in the immunotherapy of bladder cancer.