Device performance of inverted polymer solar cells with AgSiO(2) nanoparticles in active layer.

Localized surface plasmon mediated polymer solar cells (PSCs) were fabricated using the Ag/SiO(2) nanoparticles (NPs). The inverted PSC structure without poly (3,4-ethylenedioxythiophene) polystyrene sulfonate ( PEDOT: PSS) was prepared due to the efficient insertion of Ag/SiO(2) NPs in the vicinity of active layer, which led to an enhancement in photo-conversion efficiency (PCE). This enhancement mainly comes from the light scattering by the SiO(2) shell and the localized surface plasmon effect by the Ag core, but we also considered the structural issues such as the NP distribution, the swelling of the active layer and of the metal electrode.

Association between Processed Meat Protein Consumption and Incident Osteoporosis in Adults Aged 50 Years and Older: A Prospective Cohort Study Based on Korean Genome and Epidemiology Study Data (2005-2020).

Background: Osteoporosis is one of the inevitable diseases affecting an aging society, substantially impacting the quality of life of its population. Protein intake has been shown to be beneficial in reducing the incidence of osteoporosis, and the effects of both animal and vegetable proteins have been studied. However, the relationship between processed meat consumption and osteoporosis has not been studied in Korea. Therefore, we aimed to analyze the correlation between processed meat consumption and incident osteoporosis in adults. Methods: Our analysis included 1,260 adults aged 50 years and older from the Korean Genome and Epidemiology Study (KoGES), recruited between 2005 and 2020. Participants were categorized into two groups according to their processed meat intake, assessed using a semi-quantitative 103-food item food frequency questionnaire. Diagnosis of osteoporosis was based on questionnaire answers. Multiple Cox hazard regression analyses were conducted to examine the association between processed meat intake and incident osteoporosis. Results: During an average follow-up period of 8.8 years, 230 participants developed osteoporosis. According to the Cox proportional regression models, the hazard ratio (95% confidence interval) of incident osteoporosis in the high intake group was 0.62 (0.41-0.94), compared to the low intake group after adjusting for confounding variables. Conclusion: These findings reveal that processed meat protein intake is inversely related to the incidence of osteoporosis in adults aged 50 years and older. This in turn suggests that processed meat intake can be proposed as an additional strategy to prevent osteoporosis.

Effect of solvent annealing on heterojunction polymer solar cells based on P3HT/PCBM.

Heterojunction (HJ) structure has the advantages of high charge collection and transport efficiency, but it also has the disadvantage of low charge collection, due to limited p-n interfaces, compared with bulkheterojunction (BHJ) structure. In order to overcome this disadvantage of HJ, we fabricated HJ solar cells with large p-n interfaces, based on poly(3-hexylthiophene) (P3HT)/[6,6]-phenyl-C61-butylric acid methyl ester (PC61 BM), treated by a solvent annealing (SA) process under atmospheric condition, which is a simple and low-cost process. The SA process induced a P3HT-PC61 BM interdiffusion layer between the P3HT and PC61 BM layers, by a diffusion of each component, and resulted in an increase of p-n interface areas. These results were confirmed by X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). The performance of a HJ device fabricated with a SA process achieved a 30% higher power conversion efficiency (PCE) value (approximately 3.3%), than that without a SA process. Interestingly, the HJ SA device showed higher long-term stability, than that without a SA process.

An Automatic-Vertical Profile Monitoring System for Fresh-Saline Water Zones in Coastal Aquifer.

Coastal aquifers are complex systems governed by fresh-saline water interactions and ocean tidal effects. The vertical electrical conductivity (EC) and temperature (T) are general indicators for detecting the fresh-saline water interface (FSI) and sea water intrusion in groundwater wells located in coastal aquifers. In this method brief, we developed a cost-effective Arduino-based automatic-vertical profile monitoring system (A-VPMS) to continuously record vertical EC and T in groundwater wells, with the aim of testing its effectiveness in spatiotemporal monitoring of the FSI in a coastal aquifer located in eastern Korea. By analyzing the high-density EC and T data obtained by the A-VPMS, we evaluated the characteristics of the FSI, such as depth and spatial distribution. Our established EC and T data collection method using the A-VPMS proved to be efficient and reliable, providing an excellent tool for fine-scale temporal and spatial understanding of sea water intrusion. The results of this study demonstrate the potential of the A-VPMS for continuous monitoring of the FSI in coastal aquifers, which is crucial for sustainable management of groundwater resources.

Photoelectrochemical polymerization of thiophene on self-assembled RuL2(NCS)2/di(3-aminopropyl)viologen on indium thin oxide.

Polythiophene layers were formed on self-assembled monolayers (SAMs)/indium tin oxide (ITO) using photoelectrochemical polymerization. The SAMs on ITO was prepared using Ru(4,4'-dicarboxylic acid-2,2'-bipyridine)2(NCS)2 and di(3-aminopropyl)viologen. The photoelectrochemically polymerized polythiophene layers on SAMs/ITO were characterized using UV-vis. absorption spectroscopy, atomic force microscopy, scanning electron microscopy, and cyclic voltammetry. The polymer layers have thickness of 360 nm, a dense surface morphology, optical gap of 2.38 eV, highest occupied molecular orbital of -5.2 eV and lowest unoccupied molecular orbital of -2.82 eV. In photoelectrochemical cells, the polythiophene on SAMs/ITO electrode showed a photocurrent of 5 microA/cm2.

Cystatin C as an early biomarker of nephropathy in patients with type 2 diabetes.

This study was done to evaluate clinical usefulness of cystatin C levels of serum and urine in predicting renal impairment in normoalbuminuric patients with type 2 diabetes and to evaluate the association between albuminuria and serum/urine cystatin C. Type 2 diabetic patients (n = 332) with normoalbuminuria (n = 210), microalbuminuria (n = 83) and macroalbuminuria (n = 42) were enrolled. Creatinine, urinary albumin levels, serum/urine cystatin C and estimated glomerular filtration rate (eGFR by MDRD [Modification of Diet in Renal Disease] and CKD-EPI [Chronic Kidney Disease Epidemiology Collaboration] equations) were determined. The cystatin C levels of serum and urine increased with increasing degree of albuminuria, reaching higher levels in macroalbuminuric patients (P < 0.001). In multiple regression analysis, serum cystatin C was affected by C-reactive protein (CRP), sex, albumin-creatinine ratio (ACR) and eGFR. Urine cystatin C was affected by triglyceride, age, eGFR and ACR. In multivariate logistic analysis, cystatin C levels of serum and urine were identified as independent factors associated with eGFR < 60 mL/min/1.73 m(2) estimated by MDRD equation in patients with normoalbuminuria. On the other hand, eGFR < 60 mL/min/1.73 m(2) estimated by CKD-EPI equation was independently associated with low level of high-density lipoprotein in normoalbuminuric patients. The cystatin C levels of serum and urine could be useful markers for renal dysfunction in type 2 diabetic patients with normoalbuminuria.

Hydrogen-Mediated Thin Pt Layer Formation on Ni3N Nanoparticles for the Oxygen Reduction Reaction.

A simple wet-chemical route for the preparation of core-shell-structured catalysts was developed to achieve high oxygen reduction reaction (ORR) activity with a low Pt loading amount. Nickel nitride (Ni3N) nanoparticles were used as earth-abundant metal-based cores to support thin Pt layers. To realize the site-selective formation of Pt layers on the Ni3N core, hydrogen molecules (H2) were used as a mild reducing agent. As H2 oxidation is catalyzed by the surface of Ni3N, the redox reaction between H2 and Pt(IV) in solution was facilitated on the Ni3N surface, which resulted in the selective deposition of Pt on Ni3N. The controlled Pt formation led to a subnanometer (0.5-1 nm)-thick Pt shell on the Ni3N core. By adopting the core-shell structure, higher ORR activity than the commercial Pt/C was achieved. Electrochemical measurements showed that the thin Pt layer on Ni3N nanoparticle exhibits 5 times higher mass activity and specific activity than that of commercial Pt/C. Furthermore, it is expected that the proposed simple wet-chemical method can be utilized to prepare various transition-metal-based core-shell nanocatalysts for a wide range of energy conversion reactions.

Stereospecific growth of densely populated rutile mesoporous TiO2 nanoplate films: a facile low temperature chemical synthesis approach.

We report for the first time, using a simple and environmentally benign chemical method, the low temperature synthesis of densely populated upright-standing rutile TiO(2) nanoplate films onto a glass substrate from a mixture of titanium trichloride, hydrogen peroxide and thiourea in triply distilled water. The rutile TiO(2) nanoplate films (the phase is confirmed from x-ray diffraction analysis, selected area electron diffraction, energy-dispersive x-ray analysis, and Raman shift) are 20-35 nm wide and 100-120 nm long. The chemical reaction kinetics for the growth of these upright-standing TiO(2) nanoplate films is also interpreted. Films of TiO(2) nanoplates are optically transparent in the visible region with a sharp absorption edge close to 350 nm, confirming an indirect band gap energy of 3.12 eV. The Brunauer-Emmet-Teller surface area, Barret-Joyner-Halenda pore volume and pore diameter, obtained from N(2) physisorption studies, are 82 m(2) g(-1), 0.0964 cm(3) g(-1) and 3.5 nm, respectively, confirming the mesoporosity of scratched rutile TiO(2) nanoplate powder that would be ideal for the direct fabrication of nanoscaled devices including upcoming dye-sensitized solar cells and gas sensors.

Self-Healing and Mechanical Properties of Thermoplastic Polyurethane/Eugenol-Based Phenoxy Resin Blends via Exchange Reactions.

The possibility of exchange reactions and thermal self-healing in blends of thermoplastic polyurethane (TPU) and phenoxy resin was investigated herein. The analyses were based on characterization obtained via differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA), and tensile test. A new phenoxy resin was synthesized from eugenol, and blends with different types of TPU were prepared to investigate the exchange reaction, thermal self-healing, and mechanical properties. The influence of phenoxy resin content on the mechanical behavior and healing efficiency was studied. Improvement of storage modulus owing to the increase of phenoxy resin content was observed. Results suggest that the exchange reaction between phenoxy- and ester-type TPU occurred during thermal treatment. However, little exchange occurred between phenoxy resin and ether-type TPU. Specifically, only ester-type TPU exhibited a significant exchange reaction in the phenoxy resin blend. Furthermore, in the presence of a catalyst (e.g., zinc acetate), the exchange reaction readily occurred, and the healing efficiency improved by the addition of the catalyst and increase in the phenoxy content.

Groundwater Impacts from the M5.8 Earthquake in Korea as Determined by Integrated Monitoring Systems.

This paper describes the impacts of the M5.8(5.1) Gyeongju earthquakes on groundwater levels using data obtained from a unique coastal monitoring well. The monitoring strategy integrates conventional water level monitoring with periodic, continuous measurements of temperature and electrical conductivity (EC) within the water column of the well. Another important component of the monitoring system is a new instrument, the InterfacEGG, which is capable of dynamically tracking the freshwater-saltwater interface. Although the system was set up to monitor seawater intrusion related to over-pumping, as well as rainfall and tidal effects, it recorded impacts associated with a large earthquake and aftershocks approximately 241 km away. Seismic energies associated with the M5.8(5.1) Gyeongju earthquakes induced groundwater flows to the monitoring well through fractures and joints in the crystalline basement rocks. Temperature and EC logging data showed that the EC vertical profile declined from an average of approximately 5300 to 4800 µS/cm following the earthquakes. The temperature profile showed a trend toward lower temperatures as the depth increased, a feature not commonly observed in previous studies. Data from the InterfacEGG suggested that the rise in EC was not due to the saltwater intrusion, but from the tendency for brackish water entering the borehole to induce convective mixing at deeper depths as the seismic waves travel through the well-aquifer system. The increase in groundwater levels was caused by pulse of colder, less brackish water flowing into the well because of the earthquake. This behavior reflects an enhancement in rock permeability by removing precipitates and colloidal particles from clogged fractures, which improve the hydraulic connection with a nearby unit with a higher hydraulic head. This study suggests there is value added with a more aggressive monitoring strategy.

Effective time- and frequency-domain techniques for interpreting seismic precursors in groundwater level fluctuations on Jeju Island, Korea.

An effective method, involving time and frequency domains was developed to interpret seismic precursors by comparing groundwater-level fluctuations recorded immediately and long before the occurrence of a known earthquake. The proposed method, consisting of the pre-processing (3-point filtering, band-pass filtering, and spectrum analysis) and post-processing (weighted moving average method and histogram and spectrum analyses) stages, was applied to the groundwater-level time series measured at three monitoring wells on Jeju Island, South Korea, from 00:00 on 8 September 2016 to 00:00 on 22 September 2016. The Gyeongju earthquake (Mw 5.4) occurred at 20:32 on 12 September2016. The histogram analysis exhibited an accentuating bellshape as the total number of waveforms, including those caused by the earthquake, of the groundwater-level fluctuations increased. The weighted moving average analysis indicated that various abnormal waveforms with different periods occurred in the fluctuations approaching the occurrence of the earthquake. The periods of seismic precursors in the groundwater-level fluctuations were determined by spectrum analysis and varied among the monitoring wells. Seismic precursor responses attributable to the Gyeongju earthquake were identified at least 8 hours before the earthquake, and the method used in this study indicates its good potential to predict an impending earthquake.

Formation Mechanism and Gram-Scale Production of PtNi Hollow Nanoparticles for Oxygen Electrocatalysis through In Situ Galvanic Displacement Reaction.

Galvanic displacement reaction has been considered a simple method for fabricating hollow nanoparticles. However, the formation of hollow interiors in nanoparticles is not easily achieved owing to the easy oxidization of transition metals, which results in mixed morphologies, and the presence of surfactants on the nanoparticle surface, which severely deteriorates the catalytic activity. In this study, we developed a facile gram-scale methodology for the one-pot preparation of carbon-supported PtNi hollow nanoparticles as an efficient and durable oxygen reduction electrocatalyst without using stabilizing agents or additional processes. The hollow structures were evolved from sacrificial Ni nanoparticles via an in situ galvanic displacement reaction with a Pt precursor, directly following a preannealing process. By sampling the PtNi/C hollow nanoparticles at various reaction times, the structural formation mechanism was investigated using transmission electron microscopy with energy-dispersive X-ray spectroscopy mapping/line-scan profiling. We found out that the structure and morphology of the PtNi hollow nanoparticles were controlled by the acidity of the metal precursor solution and the nanoparticle core size. The synthesized PtNi hollow nanoparticles acted as an oxygen reduction electrocatalyst, with a catalytic activity superior to that of a commercial Pt catalyst. Even after 10 000 cycles of harsh accelerated durability testing, the PtNi/C hollow electrocatalyst showed high performance and durability. We concluded that the Pt-rich layers on the PtNi hollow nanoparticles improved the catalytic activity and durability considerably.

Tunable Phosphorescent Emission through Energy Transfer within Multilayer Thin Films Based on a Carbazole-Based Host and Ir(III)-Complex Guest System.

A new method to tune both phosphorescence emission intensity and spectroscopic colors based on the alternatively structured host/guest multilayer thin films prepared by the spin-assisted LbL deposition is presented. Their emission characteristics are demonstrated with pairs of positively charged Ir-PEI complexes as guests and negatively charged CBZ-PAA as hosts. The phosphorescent emission of Ir-PEI complexes is enhanced by the energy transfer from the host to the guest and, additionally, this energy transfer can be finely tuned by the insertion of spacer layers between the phosphorescent donor and acceptor layers to vary the emission intensity as well as to render different emission colors.

Electrochemically intercalated indium-tin-oxide/poly(3-hexylthiophene): A solid-state heterojunction solar cell.

A heterojunction solar cell design composed of poly(3-hexylthiophene) (P3HT) and intercalated indium-tin-oxide (ITO) donor-acceptor system is explored for the first time. Substantial change in band edge of ITO is noticed after intercalation. Structural and surface morphological studies are reported. Due to tuned band gap of ITO, an increase in short circuit current from 0.0012 to 0.46 mA/cm(2), fill factor from 0.39 to 0.51, and power conversion efficiency from 0.000 367 to 0.3% is obtained for heterojunction solar cell when compared to P3HT alone. This novel, room temperature design approach would be of great scientific interest in current solid-state solar cell scenario.

Enhanced photocurrent in the RuL2(NCS)2/ di-(3-aminopropyl)-viologen/Au nanoparticles/ITO system: use of Au nanoparticles for retardation of the back electron transfer reaction.

This paper reports the use of Au nanoparticles (NPs) as electron transfer bridge layers to improve the photocurrent of viologen/Ru complex-based photoelectrochemical cells. The Ru complex/ viologen/Au NPs on electrodes were prepared using self-assembled monolayers. The cell system showed an excellent photocurrent of 25 nA/cm2 under the 1.5 air mass condition (I = 100 mW/cm2), which is five times greater than Au NPs due to the reduced recombination reaction.

Reduced recombination and photodegradation processes of photoelectrochemical cell-based on CdSe nanofibers in the presence of PEDOT:PSS layers.

This paper reports the use of poly(3,4-ethylenedioxythiophen):poly(styrene sulfonate) (PEDOT: PSS) as a protective layer to reduce the photodegradation and recombination processes of CdSe nanofiber films. Due to reduced photodegradation and recombination processes of photoelectrochemical cell-based CdSe nanofiber films, the power conversion efficiency of CdSe nanofibers films was 1.81% in the presence of PEDOT:PSS layers under the 1.5 air mass condition (I = 80 mW/cm2), which is an 82.8% increase compared to films without PEDOT:PSS layers. Furthermore, the CdSe film was highly stable under illumination in the presence of PEDOT:PSS layers.

Improvement of device efficiency by phosphorescent materials in polymers bulk heterojunction solar cells.

To improve the performance of organic solar cells, various methods have been used to increase the light absorbance and electron transfer efficiency or decrease the internal resistance of the device. In this article, red dyes of phosphorescent materials are used to improve the performance of bulk heterojunction organic solar cells based on MDMO-PPV and PCBM. Solar cell devices doped with different red dyes showed higher performances in terms of current, voltage and conversion efficiency than those without red dyes. The efficiency was maximized in the devices with a 10% concentration of red dye 2, which was attributed to the longer exciton lifetimes that were induced by the triplet spin state of the red dyes allowing them to reach the p-n junction and thereby generate more photocurrent.

Modification of ion permeability utilizing pH-dependent selective swelling of polyelectrolyte multilayer films.

The selective swelling behavior of polyelectrolyte multilayer (PEM) films prepared by layer-by-layer (L-b-L) assembly influences the ion-permeability in contrast to surface charge density of the films. The cation terminated polyethylene amine (PEI) and anion terminated polyacrylic acid (PAA) were dissolved in DI water, and the pH was adjusted to 10 and 4, respectively, exemplifies thick denser film with good layering structure. The layered polyelectrolyte films has selective swelling behavior at pH 4 (PEI) or pH 10 (PAA), influences the permeability of both Ru(NH3)6(2+) and Fe(CN)6(3-) rather than surface charge character or film charge density. The swollen top most layer shows "on" character, whereas, shrunken top most layer shows "off" character for the ion-permeability. Such "on-off" character can be used for the pH-dependent switches based on surface morphology.

Zwitterion Nondetergent Sulfobetaine-Modified SnO2 as an Efficient Electron Transport Layer for Inverted Organic Solar Cells.

Tin oxide (SnO2) has been widely accepted as an effective electron transport layer (ETL) for optoelectronic devices because of its outstanding electro-optical properties such as its suitable band energy levels, high electron mobility, and high transparency. Here, we report a simple but effective interfacial engineering strategy to achieve highly efficient and stable inverted organic solar cells (iOSCs) via a low-temperature solution process and an SnO2 ETL modified by zwitterion nondetergent sulfobetaine 3-(4-tert-butyl-1-pyridinio)-1-propanesulfonate (NDSB-256-4T). We found that NDSB-256-4T helps reduce the work function of SnO2, resulting in more efficient electron extraction and transport to the cathode of iOSCs. NDSB-256-4T also passivates the defects in SnO2, which serves as recombination centers that greatly reduce the device performance of iOSCs. In addition, NDSB-256-4T provides the better interfacial contact between SnO2 and the active layer. Thus, a higher power conversion efficiency (PCE) and longer device stability of iOSCs are expected for a combination of SnO2 and NDSB-256-4T than for devices based on SnO2 only. With these enhanced interfacial properties, P3HT:PC60BM-based iOSCs using SnO2/NDSB-256-4T (0.2 mg/mL) as an ETL showed both a higher average PCE of 3.72%, which is 33% higher than devices using SnO2 only (2.79%) and excellent device stability (over 90% of the initial PCE remained after storing 5 weeks in ambient air without encapsulation). In an extended application of the PTB7-Th:PC70BM systems, we achieved an impressive average PCE of 8.22% with SnO2/NDSB-256-4T (0.2 mg/mL) as the ETL, while devices based on SnO2 exhibited an average PCE of only 4.45%. Thus, the use of zwitterion to modify SnO2 ETL is a promising way to obtain both highly efficient and stable iOSCs.

Characteristics of Self-Healable Copolymers of Styrene and Eugenol Terminated Polyurethane Prepolymer.

With limited biomass that can be currently utilized as a renewable resource, it is important to develop a method to convert biomass into materials that can replace fossil fuel product. In this paper, eugenol, a bio-based allyl chain-substituted guaiacol, was used to synthesize self-healable copolymers. Eugenol terminated polyurethane prepolymer (ETPU) was synthesized from eugenol and polyurethane prepolymers terminated with isocyanate groups. ETPU contained two allyl groups. Self-healing copolymer networks were obtained by copolymerization of ETPU and styrene monomer via free radical polymerization. Effects of ETPU content on the properties of copolymers were then studied. These copolymers containing ETPU exhibited good thermal stability and mechanical properties. These copolymers showed higher tensile strength and elongation at break than PS. Their maximum tensile strength reached 19 MPa. In addition, these copolymers showed self-healing property at elevated temperature due to the reversible nature of urethane units in ETPU.