Formulation, Preparation, Characterization, and Evaluation of Dicarboxylic Ionic Liquid Donepezil Transdermal Patches.

Donepezil (DPZ) is generally administered orally to treat Alzheimer's disease (AD). However, oral administration can cause gastrointestinal side effects. Therefore, to enhance compliance, a new way to deliver DPZ from transdermal patch was developed. Ionic bonds were created by dissolving dicarboxylic acid and DPZ in ethanol, resulting in a stable ionic liquid (IL) state. The synthesized ILs were characterized by differential scanning calorimetry, optical microscope, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The DPZ ILs were then transformed to a suitable drug-in-adhesive patch for transdermal delivery of DPZ. The novel DPZ ILs patch inhibits crystallization of the IL, indicating coherent design. Moreover, DPZ ILs and DPZ IL patch formulations performed excellent skin permeability compared to that of the DPZ free-base patch in both in vitro and ex vivo skin permeability studies.

Preparation, characterization, and evaluation of celecoxib eutectic mixtures with adipic acid/saccharin for improvement of wettability and dissolution rate.

Celecoxib (CEL) is a selective cyclooxygenase-2 (COX-2) inhibitor therapeutically indicated for the treatment of rheumatoid arthritis, osteoarthritis, acute pain, and inflammation. However, its poor solubility and dissolution rate significantly hinders its broader application. In this study, eutectic mixtures, as binary pharmaceutical compositions of CEL with adipic acid (ADI) and saccharin (SAC), were identified through a phase diagram and Tammann's triangle intended to improve the wettability and dissolution rate of poorly water-soluble CEL. The contact angles at 0s in the liquid-solid interface were approximately θs (theta) 79.7 ±â€¯0.50° and 86.65 ±â€¯0.45° for CEL-ADI and CEL-SAC, respectively, which were much lower than the value obtained for CEL (92.05 ±â€¯0.75° θ). Moreover, a comparison of the disk intrinsic dissolution rate and powder dissolution properties demonstrated that eutectic mixtures significantly increased the dissolution rate compared with CEL and physical mixtures. A general relationship was elucidated and indicated that the dissolution rate was increased as the contact angle decreased (correlation coefficient, r = 0.9966 ±â€¯0.0031). Therefore, CEL-ADI and CEL-SAC eutectics may offer a novel formulation strategy to enhance the solubility and oral bioavailability of CEL.

Design and verification of a novel hollow vibrating module for laser machining.

If a vibration module is added on laser machining system, the quality of surface finish and aspect ratio on metals can be significantly enhanced. In this study, a single mobility model of vibrating laser along the path of laser beam was put forward. In order to realize the desired unidirectional motion, a resonance type vibration module with optical lens was designed and manufactured. This cylindrical module was composed of curved-beam flexure elements. The cylindrical coordinate system was established to describe the relationship of a curved-beam flexure element's motion and deformation. In addition, the stiffness matrix of the curved-beam element was obtained. Finite element method and dynamical modeling were provided to analyze the resonance frequency and the displacement of the motion. The feasibility of the design was demonstrated with the help of experiments on frequency response. Experimental results show good agreement with theoretical analysis and simulation predictions.

Design of voice coil motor dynamic focusing unit for a laser scanner.

Laser scanning systems have been used for material processing tasks such as welding, cutting, marking, and drilling. However, applications have been limited by the small range of motion and slow speed of the focusing unit, which carries the focusing optics. To overcome these limitations, a dynamic focusing system with a long travel range and high speed is needed. In this study, a dynamic focusing unit for a laser scanning system with a voice coil motor (VCM) mechanism is proposed to enable fast speed and a wide focusing range. The VCM has finer precision and higher speed than conventional step motors and a longer travel range than earlier lead zirconium titanate actuators. The system has a hollow configuration to provide a laser beam path. This also makes it compact and transmission-free and gives it low inertia. The VCM's magnetics are modeled using a permeance model. Its design parameters are determined by optimization using the Broyden-Fletcher-Goldfarb-Shanno method and a sequential quadratic programming algorithm. After the VCM is designed, the dynamic focusing unit is fabricated and assembled. The permeance model is verified by a magnetic finite element method simulation tool, Maxwell 2D and 3D, and by measurement data from a gauss meter. The performance is verified experimentally. The results show a resolution of 0.2 µm and travel range of 16 mm. These are better than those of conventional focusing systems; therefore, this focusing unit can be applied to laser scanning systems for good machining capability.