RESUMO
The green hydrogen economy is expected to play a crucial role in carbon neutrality, but industrial-scale water electrolysis requires improvements in efficiency, operation costs, and capital costs before broad deployment. Electrolysis operates at a high current density and involves the substantial formation of gaseous products from the electrode surfaces to the electrolyte, which may lead to additional resistance and a resulting loss of efficiency. A detailed clarification of the bubble departure phenomena against the electrode surface and the surrounding electrolytes is needed to further control bubbles in a water electrolyzer. This study clarifies how electrolyte properties affect the measured bubble detachment sizes from the comparisons with analytical expressions and dynamic simulations. Bubble behavior in various electrolyte solutions and operating conditions was described using various physical parameters. A quantitative relationship was then established to connect electrolyte properties and bubble departure diameters, which can help regulate the bubble management through electrolyte engineering.
RESUMO
Nanocellulose is regarded as a green and renewable nanomaterial that has attracted increased attention. In this study, we demonstrate that nanocellulose materials can exhibit high thermal conductivity when their nanofibrils are highly aligned and bonded in the form of filaments. The thermal conductivity of individual filaments, consisting of highly aligned cellulose nanofibrils, fabricated by the flow-focusing method is measured in dried condition using a T-type measurement technique. The maximum thermal conductivity of the nanocellulose filaments obtained is 14.5 W/m-K, which is approximately five times higher than those of cellulose nanopaper and cellulose nanocrystals. Structural investigations suggest that the crystallinity of the filament remarkably influence their thermal conductivity. Smaller diameter filaments with higher crystallinity, that is, more internanofibril hydrogen bonds and less intrananofibril disorder, tend to have higher thermal conductivity. Temperature-dependence measurements also reveal that the filaments exhibit phonon transport at effective dimension between 2D and 3D.
Assuntos
Nanopartículas , Nanoestruturas , Celulose/química , Condutividade Térmica , Hidrodinâmica , Nanoestruturas/químicaRESUMO
CuO nanowire/microflower structure on Cu foil is synthesized by annealing a Cu(OH)2 nanowire/CuO microflower structure at 250 °C in air. The nanowire/microflower structure with its large surface area leads to an efficient catalysis and charge transfer in glucose detection, achieving a high sensitivity of 1943 µA mM(-1) cm(-2), a wide linear range up to 4 mM and a low detection limit of 4 µM for amperometric glucose sensing in alkaline solution. With a second consecutive growth of CuO nanowires on the microflowers, the sensitivity of the obtained CuO nanowire/microflower/nanowire structure further increases to 2424 µA mM(-1) cm(-2), benefiting from an increased number of electrochemically active sites. The enhanced electrocatalytic performance of the CuO nanowire/microflower/nanowire electrode compared to the CuO nanowire/microflower electrode, CuO nanowire electrode and CuxO film electrode provides evidence for the significant role of available surface area for electrocatalysis. The rational combination of CuO nanowire and microflower nanostructures into a nanowire supporting microflower branching nanowires structure makes it a promising composite nanostructure for use in CuO based electrochemical sensors with promising analytical properties.
Assuntos
Técnicas Biossensoriais/instrumentação , Cobre/química , Técnicas Eletroquímicas/instrumentação , Glucose/análise , Nanofios/química , Eletrodos , Glucose/química , Nanofios/ultraestruturaRESUMO
We report numerical analysis of the coupling of localized surface plasmons to the modes of U-shaped cavities. The coupling results in intense resonance for which the electric field is strongly enhanced on the cavity surfaces. As a result, an optical vortex in the power flow is formed in the cavities and a sharp and strong resonance dip is observed in the reflectance spectrum. High sensitivity of the dip wavelength to change in the refractive index of the surrounding medium is reported. The high sensitivity is realized with a small number of cavities, thus enabling miniaturization of detectors based on U-shaped cavities.
Assuntos
Desenho Assistido por Computador , Ressonância de Plasmônio de Superfície/instrumentação , Transdutores , Desenho de Equipamento , Análise de Falha de Equipamento , MiniaturizaçãoRESUMO
An easy and large-scale fabrication technique of metal fins was used to produce periodic Au fin arrays that realized light confinement in the near-infrared region. Light confinement was revealed by vortex patterns in the optical power flow of an array of high-aspect-ratio fins (height of 1000 nm for a width of 50 nm). The light confinement resulted in sharp dips in the reflectance spectrum of the high-aspect-ratio fin array. The wavelengths of the reflectance dips were found to shift toward higher values when the refractive index of the surrounding medium was increased. Experimental and simulated dip shift values were in good agreement with a demonstrated sensitivity of 580 nm per refractive index unit.
RESUMO
Droplet spreading and transport phenomenon is ubiquitous and has been studied by engineered surfaces with a variety of topographic features. To obtain a directional bias in dynamic wetting, hydrophobic surfaces with a geometrical asymmetry are generally used, attributing the directionality to one-sided pinning. Although the pinning may be useful for directional wetting, it usually limits the droplet mobility, especially for small volumes and over wettable surfaces. Here, we demonstrate a pinning-less approach to rapidly transport millimeter sized droplets on a partially wetting surface. Placing droplets on an asymmetrically structured surfaces with micron-scale roughness and applying symmetric horizontal vibration, they travel rapidly in one direction without pinning. The key, here, is to generate capillary-driven rapid contact-line motion within the time-scale of period of vibration. At the right regime where a friction factor local at the contact line dominates the rapid capillary motion, the asymmetric surface geometry can induce smooth and continuous contact-line movement back and forth at different speed, realizing directional motion of droplets even with small volumes over the wettable surface. We found that the translational speed is selective and strongly dependent on the droplet volume, oscillation frequency, and surface pattern properties, and thus droplets with a specific volume can be efficiently sorted out.
RESUMO
A great number of butterfly species in the warmer climate have evolved to exhibit fascinating optical properties on their wing scales which can both regulate the wing temperature and exhibit structural coloring in order to increase their chances of survival. In particular, the Archaeoprepona demophon dorsal wing demonstrates notable radiative cooling performance and iridescent colors based on the nanostructure of the wing scale that can be characterized by the nanoporous matrix with the periodic nanograting structure on the top matrix surface. Inspired by the natural species, we demonstrate a multifunctional biomimetic film that reconstructs the nanostructure of the Archaeoprepona demophon wing scales to replicate the radiative cooling and structural coloring functionalities. We resorted to the SiO2 sacrificial template-based solution process to mimic the random porous structure and laser-interference lithography to reproduce the nanograting architecture of the butterfly wing scale. As a result, the biomimetic structure of the nanograted surface on top of the porous film demonstrated desirable heat transfer and optical properties for outstanding radiative cooling performance and iridescent structural coloring. In this regard, the film is capable of inducing the maximum temperature drop of 8.45 °C, and the color gamut of the biomimetic film can cover 91.8% of the standardized color profile (sRGB).
Assuntos
Borboletas , Nanoestruturas , Animais , Biomimética , Borboletas/fisiologia , Nanoestruturas/química , Dióxido de Silício , Asas de Animais/química , Asas de Animais/fisiologiaRESUMO
Wetting phenomena, i.e. the spreading of a liquid over a dry solid surface, are important for understanding how plants and insects imbibe water and moisture and for miniaturization in chemistry and biotechnology, among other examples. They pose fundamental challenges and possibilities, especially in dynamic situations. The surface chemistry and micro-scale roughness may determine the macroscopic spreading flow. The question here is how dynamic wetting depends on the topography of the substrate, i.e. the actual geometry of the roughness elements. To this end, we have formulated a toy model that accounts for the roughness shape, which is tested against a series of spreading experiments made on asymmetric sawtooth surface structures. The spreading speed in different directions relative to the surface pattern is found to be well described by the toy model. The toy model also shows the mechanism by which the shape of the roughness together with the line friction determines the observed slowing down of the spreading.
Assuntos
Hidrodinâmica , Modelos Químicos , Molhabilidade , Algoritmos , Fricção , Microfluídica , Soluções/química , Propriedades de SuperfícieRESUMO
We present a systematic study on the fabrication, characterization and high temperature surface enhanced Raman spectroscopy (SERS) performance of SiO2 coated silver nanoparticles (Ag@SiO2) on a flat substrate, aiming to obtain a thermally robust SERS substrate for monitoring high temperature reactions. We confirm that a 10-15 nm SiO2 coating provides a structure stability up to 900 °C without significantly sacrificing the enhancement factor, while the uncoated particle cannot retain the SERS effect above 500 °C. The finite difference time domain (FDTD) simulation results supported that the SiO2 coating almost has no influence on the distribution of the electric field but only physically trapped the most enhanced spot inside the coating layer. On this thermally robust substrate, we confirmed that the SERS of horizontally aligned single walled carbon nanotubes is stable at elevated temperatures, and demonstrate an in situ Raman monitoring of the atmosphere of the annealing process of nanodiamonds, in which the interconverting process of C-C bonds is unambiguously observed. We claim that this is a first experimental proof that the high temperature SERS effect can be preserved and applied in a chemical reaction at temperature above 500 °C. This versatile substrate also enables novel opportunities for observing growth, etching, and structure transformation of many 0D and 2D nano-materials.