Discrimination of beef composition and sensory quality by using rapid Evaporative Ionisation Mass Spectrometry (REIMS).

Herein, we investigated the potential of REIMS analysis for classifying muscle composition and meat sensory quality. The study utilized 116 samples from 29 crossbred Angus × Salers, across three muscle types. Prediction models were developed combining REIMS fingerprints and meat quality metrics. Varying efficacy was observed across REIMS discriminations - muscle type (71 %), marbling level (32 %), untrained consumer evaluated tenderness (36 %), flavor liking (99 %) and juiciness (99 %). Notably, REIMS demonstrated the ability to classify 116 beef across four Meat Standards Australia grades with an overall accuracy of 37 %. Specifically, "premium" beef could be differentiated from "unsatisfactory", "good everyday" and "better than everyday" grades with accuracies of 99 %, 84 %, and 62 %, respectively. Limited efficacy was observed however, in classifying trained panel evaluated sensory quality and fatty acid composition. Additionally, key predictive features were tentatively identified from the REIMS fingerprints primarily comprised of molecular ions present in lipids, phospholipids, and amino acids.

French consumer evaluation of eating quality of Angus x Salers beef: Effects of muscle cut, muscle slicing and ageing.

Based on the Meat Standards Australia (MSA) methodology, the objectives of this study were to evaluate the eating quality of grass-fed Angus x Salers beef by French consumers, across different muscle cuts (m. triceps brachii caput longum, m. longissimus dorsi et thoracis and m. rectus abdominis), ageing times (5 and 14 days) and muscle slicing and grilling methods (being distinguished by 2 different sides on the grill), and to further quantify whether the MSA model could predict the eating quality of the meat produced by these lean crossbred animals. The results showed that French consumers can discern significant differences in eating quality traits across muscle cuts but not between ageing times and muscle slicing methods. In this study, the accuracy of eating quality score (MQ4)-assigned MSA grade was 64.5%. Due to the lack of MSA data on these lean crossbred animals, the prediction of eating quality from carcass characteristics was less accurate than usual. However, these results do indicate that the MSA sensory testing protocol, the MQ4 calculation and the MSA quality grades could be used to support a consumer-based quality grading system in France.

Carcass Characteristics and Beef Quality of Young Grass-Fed Angus x Salers Bovines.

To characterize carcass and meat attributes, such as beef eating quality in specific farming conditions, 31 young grass-fed crossbred Angus x Salers cattle in two farming systems (a mono-cattle system versus a mixed system with beef cattle and sheep) were used in this study. Three muscle cuts (striploin-m. longissimus dorsi et thoracis; bolar blade-m. triceps brachii caput longum; internal flank plate-m. obliquus internus abdominis) were used for consumer eating quality testing and striploin was used for panelist eating quality assessment, and objective measurements [Warner-Bratzler shear force (WBSF) and fatty acid (FA) and antioxidant contents]. Results indicated that the farming system had no impact on carcass characteristics or meat quality, but it tended to affect FA content, which is likely explained by between-system differences in animal maturity (assessed by ossification score). Animal gender had significant effects on three eating quality traits evaluated by untrained consumers, with higher flavor liking, overall liking, and overall meat eating quality (MQ4) scores in females than in males. Additionally, FA contents were correlated with sensory quality traits to varying extents: consumer-scored tenderness, flavor, and overall liking were mainly positively correlated with ω-3 and ω-6 polyunsaturated fatty acid (PUFA) contents, and panelist-evaluated tenderness and abnormal flavor were more positively correlated with total lipids, saturated fatty acid (SFA), and monounsaturated fatty acid (MUFA) contents. Overall, this study showed that specific grass-fed crossbred Angus x Salers cattle can produce lean meat rich in ω-3 PUFAs with a low ω-6/ω-3 ratio and with "better than average" beef eating quality.

Are Marbling and the Prediction of Beef Eating Quality Affected by Different Grading Sites?

For the European abattoirs, the preferred carcass grading site is at the fifth rib, and cutting at the tenth rib as in Australia could lead to a lower economic value of the carcass. Therefore, the objective of this study was to compare the grading scores of marbling and the meat and fat color on Musculus longissimus thoracis et lumborum (LTL) at the fifth and the tenth thoracic vertebrae. The consequences on the prediction of beef eating quality using the Meat Standards Australia (MSA) grading scheme were also evaluated for cull cows, which produce the majority of beef consumed in France. Carcasses from 208 French cattle, mainly Limousine cows, were graded according to the Australian Beef Carcase Chiller Assessment System (ABCAS) used for the implementation of the MSA system. The results indicate that there was no significant difference in the marbling score, between the fifth and the tenth ribs and hence in the MSA index and in the Global Quality [meat quality (MQ4)] scores calculated from marbling values from either the fifth rib or the tenth rib. However, the meat color at the tenth rib was significantly darker than that at the fifth rib (p < 0.01), and the fat color at the tenth rib was significantly yellower than that at the fifth rib (p < 0.001). The results of this study suggest that the grading of marbling can be conducted on M. LTL at the fifth thoracic vertebrae for routine use of the MSA system in France and, more generally, in Europe. However, further investigation and adjustment would be needed for other critical MSA scores (such as rib fat thickness) while respecting the European carcass quartering practices.

Contributions of tenderness, juiciness and flavor liking to overall liking of beef in Europe.

This study evaluated the contributions of sensory traits to overall liking in Europe. Perceptions by untrained consumers of tenderness, juiciness, flavor liking and overall liking were determined using the Meat Standards Australia protocols. According to European consumer testing with European beef samples, flavor liking was the most important contributor (39%) to beef overall liking, followed by tenderness (31%) and juiciness (24%) (P < .05; R2 > 0.94). The improvement in tenderness over the last decades may explain the highest contribution of flavor liking nowadays. Flavor liking is therefore the main driver of variability in overall liking. Juiciness is the least robust trait which could be influenced by other traits during consumer perception. For outstanding steaks, each sensory trait should have excellent scores and high contributions to overall liking. For medium cuts, one sensory trait with a low score has the potential to be compensated by other traits with higher scores and more emphasis will be placed on the trait with the lowest perception.

European conformation and fat scores of bovine carcasses are not good indicators of marbling.

Marbling is one of the primary carcass attributes utilized in most beef grading systems for eating quality evaluation. In Europe, the current beef grading system is the EUROP grid, which is focused on carcass commercial value and production yield rather than eating quality estimation. The aim of this study was to investigate the relationship between marbling and the most common scores for carcass classification in Europe. If there are strong associations between marbling and European classification scores, marbling score may be estimated from the carcass characteristics. However, this study indicated that European classification scores explain only a slight proportion of the variance in marbling score (32%, 46%, 34% and 21% for the entire cattle group, young bulls, females and steers, respectively). Therefore, whereas the EUROP grid is well adapted to estimate yield, it does not reflect marbling at all. The European beef industry should take into account additional indicators related to beef palatability to assist the determination of the commercial value of carcasses.

Predicting the Quality of Meat: Myth or Reality?

This review is aimed at providing an overview of recent advances made in the field of meat quality prediction, particularly in Europe. The different methods used in research labs or by the production sectors for the development of equations and tools based on different types of biological (genomic or phenotypic) or physical (spectroscopy) markers are discussed. Through the various examples, it appears that although biological markers have been identified, quality parameters go through a complex determinism process. This makes the development of generic molecular tests even more difficult. However, in recent years, progress in the development of predictive tools has benefited from technological breakthroughs in genomics, proteomics, and metabolomics. Concerning spectroscopy, the most significant progress was achieved using near-infrared spectroscopy (NIRS) to predict the composition and nutritional value of meats. However, predicting the functional properties of meats using this method-mainly, the sensorial quality-is more difficult. Finally, the example of the MSA (Meat Standards Australia) phenotypic model, which predicts the eating quality of beef based on a combination of upstream and downstream data, is described. Its benefit for the beef industry has been extensively demonstrated in Australia, and its generic performance has already been proven in several countries.

Internal cardioversion of persistent atrial fibrillation using rectilinear biphasic waveform.

Internal electrical cardioversion is currently used in patients with persistent atrial fibrillation resistant to external electrical cardioversion. In external cardioversion, biphasic waveforms have shown a greater efficacy than monomorphic waveforms. The present study aimed to test the safety and efficacy of rectilinear biphasic waveform in converting patients with persistent atrial fibrillation to sinus rhythm using internal electrical cardioversion, and to compare it with that of classical monophasic waveform. Twenty-seven consecutive patients with persistent AF received 31 internal cardioversions, using monophasic waveform in 11 (group I), and rectilinear biphasic waveform in 20 cases (group II). Baseline patients characteristics were similar in both groups. Multipolar catheters were positioned in the distal coronary sinus and in the high right atrium. Synchronised shocks were delivered using an escalating protocol of 2, 5, 10, 15, 20, 30, and 50 Joules. In group I, 1 patient was resistant to maximal energy (success rate 91%). The mean energy of the maximal shock was 18 +/- 13 J. In group II, all patients were converted to sinus rhythm. The mean energy of the maximal shock was 9 +/- 5 J (p < 0.01 vs. group I). No significant complications occurred. At 3 months follow-up, 45% of group I and 60% of group II patients remained in sinus rhythm (p = NS). We conclude that internal cardioversion using rectilinear biphasic waveform is feasible and safe, and requires less energy than classical monophasic waveforms.

Modelling of beef sensory quality for a better prediction of palatability.

Despite efforts by the industry to control the eating quality of beef, there remains a high level of variability in palatability, which is one reason for consumer dissatisfaction. In Europe, there is still no reliable on-line tool to predict beef quality and deliver consistent quality beef to consumers. Beef quality traits depend in part on the physical and chemical properties of the muscles. The determination of these properties (known as muscle profiling) will allow for more informed decisions to be made in the selection of individual muscles for the production of value-added products. Therefore, scientists and professional partners of the ProSafeBeef project have brought together all the data they have accumulated over 20 years. The resulting BIF-Beef (Integrated and Functional Biology of Beef) data warehouse contains available data of animal growth, carcass composition, muscle tissue characteristics and beef quality traits. This database is useful to determine the most important muscle characteristics associated with a high tenderness, a high flavour or generally a high quality. Another more consumer driven modelling tool was developed in Australia: the Meat Standards Australia (MSA) grading scheme that predicts beef quality for each individual muscle×specific cooking method combination using various information on the corresponding animals and post-slaughter processing factors. This system has also the potential to detect variability in quality within muscles. The MSA system proved to be effective in predicting beef palatability not only in Australia but also in many other countries. The results of the work conducted in Europe within the ProSafeBeef project indicate that it would be possible to manage a grading system in Europe similar to the MSA system. The combination of the different modelling approaches (namely muscle biochemistry and a MSA-like meat grading system adapted to the European market) is a promising area of research to improve the prediction of beef quality. In both approaches, the volume of data available not only provides statistically sound correlations between various factors and beef quality traits but also a better understanding of the variability of beef quality according to various criteria (breed, age, sex, pH, marbling etc.).