Galloylated proanthocyanidins in dentin matrix exhibit biocompatibility and induce differentiation in dental stem cells.

Aim: Grape seed extract contains a complex mixture of proanthocyanidins (PACs), a plant biopolymer used as a biomaterial to improve reparative and preventive dental therapies. Co-polymerization of PACs with type I collagen mechanically reinforces the dentin extracellular matrix. This study assessed the biocompatibility of PACs from grape seed extract on dental pulp stem cells (DPSCs) in a model simulating leaching through dentin to the pulp cavity. The aim was to determine the type of PACs (galloylated vs. non-galloylated) within grape seed extract that are most compatible with dental pulp tissue. Methodology: Human demineralized dentin was treated with selectively-enriched dimeric PACs prepared from grape seed extract using liquid-liquid chromatography. DPSCs were cultured within a 2D matrix and exposed to PAC-treated dentin extracellular matrix. Cell proliferation was measured using the MTS assay and expression of odontoblastic genes was analyzed by qRT-PCR. Categorization of PACs leaching from dentin was performed using HPLC-MS. Results: Enriched dimeric fractions containing galloylated PACs increased the expression of certain odontoblastic genes in DPSCs, including Runt-related transcription factor 2 (RUNX2), vascular endothelial growth factor (VEGF), bone morphogenetic protein 2 (BMP2), basic fibroblast growth factor (FGF2), dentin sialophosphoprotein (DSPP) and collagen, type I, alpha 1 (COLI). Galloylated dimeric PACs also exhibited minor effects on DPSC proliferation, resulting in a decrease compared to control after five days of treatment. The non-galloylated dimer fraction had no effect on these genes or on DPSC proliferation. Conclusions: Galloylated PACs are biocompatible with DPSCs and may exert a beneficial effect on cells within dental pulp tissue. The observed increase in odontoblastic genes induced by galloylated PACs together with a decrease in DPSC proliferation is suggestive of a shift toward cell differentiation. This data supports the use of dimeric PACs as a safe biomaterial, with galloylated dimeric PACs exhibiting potential benefits to odontoblasts supporting dentin regeneration.

Targeting Trimeric and Tetrameric Proanthocyanidins of Cinnamomum verum Bark as Bioactives for Dental Therapies.

The present study elucidated the structures of three A-type tri- and tetrameric proanthocyanidins (PACs) isolated from Cinnamomum verum bark to the level of absolute configuration and determined their dental bioactivity using two therapeutically relevant bioassays. After selecting a PAC oligomer fraction via a biologically diverse bioassay-guided process, in tandem with centrifugal partition chromatography, phytochemical studies led to the isolation of PAC oligomers that represent the main bioactive principles of C. verum: two A-type tetrameric PACs, epicatechin-(2ß→O→7,4ß→8)-epicatechin-(4ß→6)-epicatechin-(2ß→O→7,4ß→8)-catechin (1) and parameritannin A1 (2), together with a trimer, cinnamtannin B1 (3). Structure determination of the underivatized proanthocyanidins utilized a combination of HRESIMS, ECD, 1D/2D NMR, and 1H iterative full spin analysis data and led to NMR-based evidence for the deduction of absolute configuration in constituent catechin and epicatechin monomeric units.

Proanthocyanidin Dimers and Trimers from Vitis vinifera Provide Diverse Structural Motifs for the Evaluation of Dentin Biomodification.

Aimed at exploring the dentin biomodification potential of proanthocyanidins (PACs) for the development of dental biomaterials, this study reports the phytochemical and dental evaluation of nine B-type PACs from grape seed extract (GSE). Out of seven isolated dimers (1-7), four new compounds (2, 3, 5, and 6) involved relatively rare ent-catechin or ent-epicatechin monomeric flavan-3-ol units. Low-temperature NMR analyses conducted along with phloroglucinolysis and electronic circular dichroism enabled unequivocal structural characterization and stereochemical assignment. Additionally, one known (8) and one new (9) B-type trimer were characterized. Differential 13C NMR chemical shifts (Δδ) were used to determine the absolute configuration of 9, relative to the dimers 1 and 2 as the possible constituent subunits. Compared to the dimers, the trimers showed superior dentin biomodification properties. The dimers, 1-7, exhibited pronounced differences in their collagenase inhibitory activity, while enhancing dentin stiffness comparably. This suggests that PAC structural features such as the degree of polymerization, relative and absolute configuration have a differential influence on enhancement of dentin biomechanical and biostability. As mechanical enhancement to dentin and resistance to proteolytic biodegradation are both essential properties functional and stable dentin substrate, the structurally closely related PACs suggest a new metric, the dentin biomodification potential (DBMP) that may rationalize both properties.

Absolute Configuration of Native Oligomeric Proanthocyanidins with Dentin Biomodification Potency.

The structurally complex oligomeric proanthocyanidins (OPACs) are promising biomimetic agents, capable of strengthening the macromolecular backbone of teeth via intermolecular and intermicrofibrillar cross-linking. This study establishes analytical methods capable of determining the absolute configuration of the catechin-type monomeric units of underivatized OPACs. This preserves the capacity of their biological evaluation, aimed at understanding the inevitably stereospecific interactions between the OPACs and dentin collagen. Guided by dental bioassays (modulus of elasticity, long-term stability), two new trimeric and tetrameric A-type OPACs were discovered as dentin biomodifiers from pine (Pinus massoniana) bark: epicatechin-(2ß→O→7,4ß→8)-epicatechin-(2ß→O→7,4ß→8)-catechin (5) and epicatechin-(2ß→O→7,4ß→8)-epicatechin-(2ß→O→7,4ß→6)-epicatechin-(2ß→O→7,4ß→8)-catechin (6), respectively. Combining 1D/2D NMR, HRESIMS, ECD, 1H iterative full spin analysis (HiFSA), and gauge-invariant atomic orbital (GIAO) δ calculations, we demonstrate how 13C NMR chemical shifts (diastereomeric building blocks (A-type dimers)) empower the determination of the absolute configuration of monomeric units in the higher oligomers 5 and 6. Collectively, NMR with ECD reference data elevates the level of structural information achievable for these structurally demanding molecules when degradation analysis is to be avoided. Considering their numerous and deceptively subtle, but 3D impactful, structural variations, this advances the probing of OPAC chemical spaces for species that bind selectively to collagenous and potentially other biologically important biomacromolecules.

Prodelphinidins enhance dentin matrix properties and promote adhesion to methacrylate resin.

OBJECTIVE: Investigate the bioactivity and stability of Rhodiola rosea (RR) fractions as a natural source of prodelphinidin gallate (PDg) on dentin collagen via analysis of the viscoelastic and resin-dentin adhesive properties of the dentin matrix. METHODS: The biomimicry and stability of RR subfractions (F1, F2, F3 and F4) with collagen were determined by dynamic mechanical analysis (DMA). DMA used a strain sweep method to assess the dentin matrix viscoelastic properties [storage (E'), loss (E"), and complex (E*) moduli and tan δ] after treatment, 7-, 30- and 90-days of storage in simulated body fluids (SBF). Resin-dentin interface properties were assessed after 1 and 90-days in SBF by microtensile bond strength test and confocal laser scanning microscopy. Data were analyzed using two and one-way ANOVA and post-hoc tests (α = 0.05). RESULTS: RR fractions increased dentin matrix complex (96 - 69 MPa) and storage (95 - 68 MPa) moduli, compared to the control (∼9 MPa) in the ranking order: F2 ≥ F3 = F1 = F4 > control (p < 0.001). Treatment did not affect tan δ values. After 30- and 90-days, RR-treated dentin E*, E' and tan δ decreased (p < 0.001). F2 fraction yielded the highest microtensile bond strength (43.9 MPa), compared to F1, F4 (35.9 - 31.7 MPa), and control (29 MPa). RR-treated interfaces mediated stable surface modifications and enhanced collagen-methacrylate resin interactions at the bioadhesive interface. SIGNIFICANCE: Prodelphinidin gallates from RR are potent and reasonably stable biomimetic agents to dentin. Higher potency of F2 fraction with the dentin matrix and the adhesive interface is associated with a degree of polymerization of 2-3 and gallo(yl) motifs.

Paradoxical effects of galloyl motifs in the interactions of proanthocyanidins with collagen-rich dentin.

Plant-derived proanthocyanidins (PACs) mediate physicochemical modifications to the dentin extracellular matrix (ECM). The structure-activity relationships of PACs remain largely unknown, mostly due to the varied complex composition of crude extracts, as well as the challenges of purification and mechanistic assessment. To assess the role of galloylated PACs as significant contributors to high yet unstable biomodification activity to the dentin ECM, we removed the galloyl moieties (de-galloylation) via enzymatic hydrolysis from three galloyl-rich PAC-containing extracts (Camellia sinensis, Vitis vinifera, and Hamamelis virginiana). The biomechanical and biological properties of dentin were assessed upon treatment with these extracts vs. their de-galloylated counterparts. An increase in the complex modulus of the dentin matrix was found with all extracts, however, the crude extract was significantly higher when compared to the de-galloylated version. Exhibiting the highest content of galloylated PACs among the investigated plants, Camellia sinensis crude extract also exhibited the biggest relapse in mechanical properties after one-month incubation. De-galloylation did not modify the damping capacity of dentin ECM. Moreover, PAC-mediated protection against proteolytic degradation was unaffected by de-galloylation. The de-galloylation experiments confirmed that gallic acid in galloylated rich-PAC extracts drive stronger yet significantly less sustained mechanical effects in dentin ECM.

Unveiling structure-activity relationships of proanthocyanidins with dentin collagen.

OBJECTIVE: To elucidate the structure-activity relationships (SARs) of proanthocyanidins (PACs) with type I collagen using sixteen chemically defined PACs with degree of polymerization (DP) 2-6. METHODS: Under a dentin model, the biomimicry of PACs with type I collagen was investigated by dynamic mechanical analysis (DMA) and infrared spectroscopy. The dentin matrix was modified with PACs from Pinus massoniana [monomers (Mon-1 and Mon-2), dimers (Dim-1-Dim-4), trimers (Tri-1-Tri-4), tetramers (Tet-1-Tet-5), and hexamer (Hex-1)]. A strain sweep method in a 3-point bending submersion clamp was used to assess the viscoelastic properties [storage (E'), loss (E"), and complex moduli (E*) and tan δ] of the dentin matrix before and after biomodification. Biochemical analysis of the dentin matrix was assessed with FTIR spectroscopy. Data were statistically analyzed using one-way ANOVA and post-hoc tests (α = 0.05). RESULTS: DP had a significant effect on modified dentin moduli (tetramers ≈ trimers > hexamers ≈ dimers > monomers ≈ control, p < 0.001). Trimers and tetramers yielded 6- to 8-fold increase in the mechanical properties of modified dentin and induced conformational changes to the secondary structure of collagen. Modifications to the tertiary structure of collagen was shown in all PAC modified-dentin matrices. SIGNIFICANCE: Findings establish three key SARs: (i) increasing DP generally enhances biomimicry potential of PACs in modulating the mechanical and chemical properties of dentin (ii) the secondary structure of dentin collagen is affected by the position of B-type inter-flavanyl linkages (4ß â†’ 6 and 4ß â†’ 8); and (iii) the terminal monomeric flavan-3-ol unit plays a modulatory role in the viscoelasticity of dentin.

Evidence to the role of interflavan linkages and galloylation of proanthocyanidins at sustaining long-term dentin biomodification.

OBJECTIVES: The interactivity of proanthocyanidins (PACs) with collagen modulates dentin matrix biomechanics and biostability. Herein, PAC extracts selected based on structural diversity were investigated to determine key PAC features driving sustained effects on dentin matrices over a period of 18months. METHODS: The chemical profiles of PAC-rich plant sources, Pinus massoniana (PM), Cinnamomum verum (CV) and Hamamelis virginiana (HV) barks, as well as Vitis vinifera (VV) seeds, were obtained by diol HPLC analysis after partitioning of the extracts between methyl acetate and water. Dentin matrices (n=15) were prepared from human molars to determine the apparent modulus of elasticity over 18months of aging. Susceptibility of the dentin matrix to degradation by endogenous and exogenous proteases was determined by presence of solubilized collagen in supernatant, and resistance to degradation by bacterial collagenase, respectively. Data were analyzed using ANOVA and Games-Howell post hoc tests (α=0.05). RESULTS: After 18months, dentin matrices modified by PM and CV extracts, containing only non-galloylated PACs, were highly stable mechanically (p<0.05). Dentin matrices treated with CV exhibited the lowest degradation by bacterial collagenase after 1h and 18months of aging (p<0.05), while dentin matrices treated with PM showed the least mass loss and collagen solubilization by endogenous enzymes over time (p<0.05). SIGNIFICANCE: Resistance against long-term degradation was observed for all experimental groups; however, the most potent and long-lasting dentin biomodification resulted from non-galloylated PACs.

An Overview of Dental Adhesive Systems and the Dynamic Tooth-Adhesive Interface.

From the conception of resin-enamel adhesion to today's contemporary dental adhesive systems, clinicians are no longer afraid of exploring the many advantages brought by adhesive restorative concepts. To maximize the performance of adhesive-based restorative procedures, practitioners must be familiar with the mechanism of adhesion, clinical indications, proper handling, the inherent limitations of the materials and the biological challenges. This review provides an overview of the current status of restorative dental adhesives, their mechanism of adhesion, mechanisms of degradation of dental adhesive interfaces, how to maximize performance, and future trends in adhesive dentistry.

Oligomeric proanthocyanidins released from dentin induce regenerative dental pulp cell response.

Proanthocyanidins (PACs) are plant-derived, multifunctional compounds that possess high interactivity with extracellular matrix (ECM) components. The documented affinity of PACs for type-I collagen is directly correlated with their structural features and degree of polymerization. In this investigation, centrifugal partition chromatography (CPC) was used to sequentially deplete less active monomeric and polymeric PACs from a crude Pinus massoniana bark extract to create refined mixtures enriched in oligomeric PACs. The ability of these oligomeric PACs to modify the mechanical properties of the dentin collagen matrix and their biocompatibility with dental pulp cells (DPCs) was evaluated in an innovative biomimetic environment. The refined mixtures displayed high interactivity with dentin collagen as demonstrated by a significant increase (>5-fold) in the modulus of elasticity of the dentin matrix. In a simplified model of the dentin-DPC complex, DPCs embedded within their native ECM in the presence of PAC-treated dentin exhibited increased proliferation. Quantitative gene expression analyses indicated that exposure to PAC-treated dentin increased the expression of key biomineralization and odontogenic differentiation regulators, including RUNX2, BMP2, OCN, and DSPP. LC-MS/MS analysis revealed that PACs two to four units long (dimers, trimers, and tetramers) were being released from dentin into media, influencing cell behavior. Overall, the results suggested that PAC dimers, trimers, and tetramers are not only biocompatible, but enhance the differentiation of DPCs towards a phenotype that favors biomineralization. PAC-enriched refined mixtures can influence the field of biomaterials and regeneration by serving as renewable, non-cytotoxic agents that can increase the mechanical properties of biomaterials. STATEMENT OF SIGNIFICANCE: Pine bark extract is a renewable source of structurally diverse proanthocyanidins (PACs), multifunctional compounds whose interaction with collagen can be tailored to specific purposes by enrichment of selected PACs from the complex mixture. Oligomeric PACs were enriched from the extract and were shown here to sustain desired tissue modification and were thus assessed for cellular response in a model of the dentin-pulp interface. This model was developed to mimic leaching of potentially reactive compounds into pulp tissue. Dental pulp cells exposed to PAC-treated dentin showed increased proliferation and expression of genes necessary for extracellular matrix deposition and biomineralization, processes crucial for forming new dentin. Thus, collagen-interactive PACs may also enhance tissue regeneration and have broad impact in tissue engineering.