First description study on molecular characterization of Hemiclepsis khankiana (Hirudinea: Glossiphoniidae) in China.

BACKGROUND: Leeches are an integral component of aquatic biocenosis and can be found in a wide range of ecosystems such as freshwater, saltwater, flowing, and still-water ecosystems. It especially plays an important role in the freshwater benthic community and is an important part of the food web. In this study, a leech species was found in the mantle cavity of wild freshwater mussels in Zigong City, Sichuan Province, China, and its identity was determined through morphological analysis and molecular biological analysis. RESULTS: The leech is Hemiclepsis khankiana, a new species of Hemiclepsis that has been discovered in Russia in recent years. Through morphological analysis, the current survey observed that the morphological characteristics of Hemiclepsis khankiana eyespots were significantly different from the first reported description. The first pair of eyespots on the leech were separated and clear, while it had been reduced to unclear shadows in the previous report. The phylogenetic tree based on the COI gene showed that the COI gene sequence obtained in this study was in the same evolutionary branch as Hemiclepsis khankiana (MN295420, MN295421). Genetically, it was most closely related to Hemiclepsis kasmiana (mean COI p-distance = 3.98%). CONCLUSIONS: The current study reported on the new distribution range of Hemiclepsis khankiana, which was initially discovered in China. This study indicates that the distribution range of the leech species has expanded, laying a foundation for further studies in China.

Genetic characteristics of an amikacin-resistant Brucella abortus strain first isolated from Marmota himalayana.

Brucella spp. are facultative intracellular pathogens that can persistently colonize animal host cells and cause zoonotic brucellosis. Brucellosis affects public health and safety and even affects economic development. Our lab found that a Brucella strain isolated from Marmota himalayana exhibited amikacin resistance. To annotate and analyze the potential resistance genes in this strain, we utilized sequencing platforms in this study and cloned potential resistance genes. The findings showed that the isolated strain belonged to B. abortus biovar 1 and was similar to B. abortus 2308. The isolate had amikacin resistance genes encoding aminoglycoside 3'-phosphotransferase. Based on the results of genome analysis, the isolated strain may have obtained amikacin resistance genes from Salmonella spp. through Tn3 family transposons. Notably, this study establishes a foundation for further research on the resistance mechanism of Brucella spp. and provides data that may be useful for the prevention and control of drug-resistant Brucella strains.

[Effect of Electroacupuncture on ATP-sensitive Potassium Channel and Protein Kinase mRNA Ex- pression in Myocardial Ischemia Model Rats].

Objective To observe the effect of electroacupuncture (EA) at different acupoints on mRNA expressions of ATP-sensitive potassium channel (Kir6. 1, Kir6. 2) and conjugated protein (SUR2A, SUR2B) and protein kinases (PKA, PKG and PKC132) in myocardial ischemia model rats. Methods Myocardial ischemia model was established in healthy male SD rats via subcutaneously injec- ting ISO (85 mg/kg) multipointedly (medial root of limbs and the back). Then they were randomly divided into 4 groups, i.e., the model group, Neiguan (PC6) group, Lieque (LU7) group, non-acupoint group, 10 in each group. Besides, another 10 healthy rats were recruited as the control group. Corresponding EA was performed at respective acupoints to rats in Neiguan (PC6) group, Lieque (LU7) group, non-acu- point group, with dense-sparse wave, 2 -3 mA, 2 -20 Hz, needle retaining time of 20 min, once per day for 7 successive days. mRNA expression levels of Kir6. 1 and Kir6. 2, SUR2A, SUR2B, PKA, PKG, and PKCß2 in left ventricular myocardium were analyzed by Real-time PCR. Results Compared with the con- trol group, mRNA expressions of each index increased in the model group (P <0. 01). Compared with the model group, mRNA expressions of each index significantly decreased in Neiguan (PC6) group and Lieque (LU7) group (P<0. 01). Compared with Neiguan (PC6) group, mRNA expressions of each index significantly increased in Lieque (LU7) group and non-acupoint group (P <0. 01). Compared with Lieque (LU7) group, mRNA expressions of each index significantly increased in non-acupoint group (P <0. 05). Conclusion EA at Neiguan (PC6) could reverse mRNA expression changes of ATP-sensitive potassium channel (Kir6. 1 and Kir6. 2)and conjugated proteins (SUR2A and SUR2B) and protein kinases (PKA, PKG, and PKCß2).

The Beneficial Effects of Electro-acupuncture at PC6 (Neiguan-point) of Gene and Protein Expressions of Classical Inward-rectifier Potassium Channels in Myocardial Ischemic Rats.

This study is aim to investigate the effect of electro-acupuncture at PC6 (Neiguan-point) on the gene and protein expressions of classical inward-rectifier potassium channels (Kir) in myocardial ischemia (MI) rats induced by isoproterenol (ISO). With ten for each one, 50 rats were divided into 5 groups which were control group, MI group, PC6 group, LU7 (Lieque-point) group and non-acupoint group. The control group was injected normal saline solution (85 mg/kg), the other groups were injected ISO (85 mg/kg). All the rats were injected once daily for two days and recorded electrocardiograms (ECGs) after every injection. Electro-acupuncture (EA) was operated at PC6, LU7 and non-acupoint respectively in the rats of PC6 group, LU7 group and non-acupoint group after twice injections. EA was performed to these three groups with disperse-dense wave (4-20 Hz), pulse amplitude of 14V, 20 mins a day remaining 7 days. The gene and protein expressions of Kir2.1, Kir2.2 and Kir2.3 were analyzed by Western Immunoblotting Technology (Western Blot) and Real-time Fluorescence Quantitative Polymerase Chain Reaction (RT-PCR). But it is regrettable that we did not detect meaningful gene and protein expressions Kir2.3, and the expressions of Kir2.1 and Kir2.2 in MI induced groups were lower [The gene and protein decreased 39.4 ± 27.3% and 38.7 ± 17.1% respectively.] than control group (P < 0.05). Compared with MI group, the results of PC6 group and LU7 group increased [PC6 group: the gene and protein increased 42.9 25.0% and 42.2 ± 10.0% respectively. LU7 group: the gene and protein increased 23.8 ± 50.1% and 21.1 ± 32.5% respectively.] obviously (P < 0.05) after EA, furthermore the expressions of PC6 group were higher [The gene and protein increased 15.4 ± 16.7% and 17.3 ± 60% respectively.] than LU7 group (P < 0.05). The results show that PC6 has a better positive effect than LU7 on MI rats, and the mechanism is probably that EA at PC6 can significantly increase the gene and protein expressions of Kir2.1 and Kir2.2.

Effect of electronic stimulation at Neiguan (PC 6) acupoint on gene expression of adenosine triphosphate-sensitive potassium channel and protein kinases in rats with myocardial ischemia.

OBJECTIVE: To investigate the effects of electronic stimulation at acupoints Neiguan (PC 6) and Lieque (LU 7) on the gene expression of the adenosine triphosphate (ATP)-Sensitive potassium channel (KATP: Kir6.1, Kir6.2, SUR2A, and SUR2B) and protein kinases (PKA, PKG, and PKCß2) in myocardial cells of rats with myocardial ischemia (MI) induced by isoproterenol (ISO). METHODS: Rats were randomly divided into a control, model, Neiguan (PC 6), Lieque (LU 7), and non-acupoint groups. The MI model was established by injecting rats with ISO. Electro-acupuncture treatment was given to the acupuncture groups, once a day for 7 days. Gene expression was analyzed with real-time PCR. RESULTS: The gene expression of KATP and protein kinases in the model group was higher than those in the control group (P < 0.05). After acupuncture treatment, the KATP and protein kinase expression levels were significantly lower in the Neiguan (PC 6) and Lieque (LU 7) groups compared with the mod- el group (P < 0.05). The Neiguan (PC 6) group lowered these levels significantly more than that of the Lieque (LU 7) group (P < 0.05). No significant differences were observed between the model and non-acupoint groups (P> 0.05). CONCLUSION: Our findings suggest that electronic needling of Neiguan (PC 6) can both reduce the gene expression of KATP and protein kinases in rats with ISO-induced MI.

Epidemic factors and control of hepatic echinococcosis in Qinghai province.

Hepatic echinococcosis, also called echinococcosis, is a health-threatening disease commonly found in pasture, and belongs to parasitic zoonoses. The purpose of this study was to investigate the prevalence and the risk factors of echinococcosis in Qinghai province in order to provide fundamental data for prevention and control of echinococcosis in Qinghai province. A total of 23 445 people from 21 counties were enrolled in this study by multi-stage stratified random sampling. Echinococcosis was diagnosed by using B-mode ultrasonography and serological tests. The results showed that the prevalence of echinococcosis was 4.47% (95%CI: 4.21%-4.73%) and serum positive rate (seroprevalence) was 15.47% (95%CI: 14.92%-16.02%) in 2010. The distribution of echinococcosis differed in age, sex, ethnicity, occupation and regions in Qinghai (P<0.05). GLMM analysis revealed that gender (female vs. male), ethnicity (Tibetan vs. other ethnicities), profession (herders vs. other professions) and region (autonomous prefectures vs. cities) were significant risk factors for echinococcosis (P<0.05). It was concluded that the prevalence of echinococcosis in 2010 was about 4% in Qinghai province, and the distribution of echinococcosis in Qinghai was associated with age, sex, ethnicity and profession.

The beneficial effect of electro-acupuncture given at PC6 (Neiguan-point) by the increase in cardiac transient outward K+ current channel which depends on the gene and protein expressions in artificially induced myocardial ischemia rats.

This study explored the mechanism of electro-acupuncture (EA) at PC6 to improve the heart function by regulating the cardiac transient outward potassium current (= Ito) channel in myocardial ischemia (MI). Kv1.4 is the main component of the slow Ito (Ito.s) channel. Kv4.2 and Kv4.3 are the main components of the fast Ito (Ito.f) channel. KChIP2 is a compound protein of Ito channel. In this experiment, MI was induced by injecting isoproterenol in rats, and the gene and protein expressions of Kv1.4, Kv4.2, Kv4.3 and KChIP2 were lower [The gene and protein decreased (42.8 ± 4.3)% and (37.2 ± 4.7)% respectively.] than the control rats significantly (p < 0.05). After MI induction, the MI rats were divided into three groups, including PC6, LU7 (Lieque-point) and Non-acupoint group which were acupunctured at once a day for 7 days respectively. After EA at PC6 and LU7, the gene and protein expressions showed obvious increased [EA at PC6: the gene and protein increased (50.24 ± 5.4)% and (39.14 ± 5.3)% respectively. EA at LU7: the gene and protein increased (24.6 ± 2.8)% and (22.04 ± 5.5)% respectively] and they are all higher than MI rats significantly (p < 0.05). EA at PC6 and LU7 showed the same variation, and the effects of EA at PC6 and LU7 were better than Non-acupuncture-point (p < 0.05). The effects of EA at PC6 were significantly better [The gene and protein increased (19.74 ± 2.7)% and (14.14 ± 4.4)% respectively] than LU7 (p < 0.05). PC6 is an acupoint of the pericardium meridian, and the pericardium meridian which corresponds to adrenal gland according to Omura Y's research, can affect the heart function directly LU7 belong to the lung meridian, and the lung plays an important factor in blood circulation according to TCM. So PC6 is more effective than LU7 on heart function regulation. The results suggested that PC6 showed the target effect of meridian specificity on regulating the Kv channel in MI.

Ultrarobust Actuator Comprising High-Strength Carbon Fibers and Commercially Available Polycarbonate with Multi-Stimulus Responses and Programmable Deformation.

Polymer-based actuators have gained extensive attention owing to their potential applications in aerospace, soft robotics, etc. However, poor mechanical properties, the inability of multi-stimuli response and programmable deformation, and the costly fabrication procedure have significantly hindered their practical application. Herein, these issues are overcome via a simple and scalable one-step molding method. The actuator is fabricated by hot-pressing commercial unidirectional carbon fiber/epoxy prepregs with a commodity PC membrane. Notable CTE differences between the CF and PC layers endow the bilayer actuator with fast and reliable actuation deformation. Benefiting from the high strength of CF, the actuator exhibits excellent mechanical performance. Moreover, the anisotropy of CF endows the actuator with design flexibility. Furthermore, the multifunction of CF makes the actuator capable of responding to thermal, optical, and electrical stimulation simultaneously. Based on the bilayer actuator, we successfully fabricated intelligent devices such as light-driven biomimetic flowers, intelligent grippers, and gesture-simulating apparatuses, which further validate the programmability and multi-stimuli response characteristics of this actuator. Strikingly, the prepared gripper possesses a grasping capacity approximately 31.2 times its own weight. It is thus believed that the concept presented paves the way for building next-generation robust robotics.

Effects of Cavity Thickness and Mold Surface Roughness on the Polymer Flow during Micro Injection Molding.

In micro injection molding, the cavity thickness and surface roughness are the main effects factors of polymer flow in the die designing and affect the quality of molded products significantly. In this study, the effects of cavity thickness and roughness of cavity surface were investigated mainly on polymer flow during molding and on the roughness of molded products. The parts were molded in the cavities with the thickness from 0.05 mm to 0.25 mm and surface roughness from Ra = 46.55 nm to Ra = 462.57 nm, respectively. The filling integrities and roughness replication ratio of molded parts were used to evaluate the statements of polymer flow and microstructure replication during micro injection molding, respectively. The results showed that the filling integrity changing trends in the thinner cavities were obviously different or even opposite to those in the thicker cavities with the changing of cavity surface roughness instead of single trend in the conventional studies. For each cavity surface roughness, the filling integrity showed an upward trend with the increasing cavity thickness. In different cavity thickness, the maximum gap of filling integrity was 23.76 mm, reaching 544.94% from 0.05 mm to 0.25 mm. Additionally, the surface roughness ratio was slightly smaller than one before, reaching the polymer surface roughness limit around Ra = 71.27 nm, which was decided by the nature of the polymer itself. This study proposed the references for the design and fabrication of mold cavities and parts, and saved time and cost in the actual product manufacturing.

Native circulating Brucella melitensis lineages causing a brucellosis epidemic in Qinghai, China.

Since 2010, the cases and incidences of human brucellosis have been increasing annually in Qinghai (QH) Province. Molecular epidemiology and phylogenetic analyses of strains from this region are crucial to better understand the transmission of the disease and the evolutionary patterns of Brucella strains. In this study, classical bio-typing assay, multilocus variable-number tandem repeat analysis, and the whole-genome sequencing-single-nucleotide polymorphism approach were used to illustrate the epidemiological and evolutionary patterns of Brucella melitensis. A total of 54 B. melitensis bv. 3 strains were isolated and molecularly characterized, with all strains belonging to the East Mediterranean lineages. Cross-regional transmission events (i.e., between counties) were caused by common sources of infection, suggesting that predominant circulating genotypes are endemic in different regions. Strengthening surveillance in animal brucellosis and controlling infected animals' cross-border movement are necessary. Two strains isolated from humans and marmots were clustered in the same sub-clade, implying the possible existence of direct and/or indirect contact between sheep (and goats) and wildlife (marmots), but this needs to be verified by further investigations. The global-scale phylogenetic analysis indicated that 54 strains sorted into six subclades, four of which formed independent lineages, suggesting that the increase in the incidence rate of human brucellosis may be caused by local circulating lineages. Further strengthening the serology and pathogen surveillance of animals (wildlife) and humans will contribute to an in-depth understanding of the transmission chain of human brucellosis in this region.

[Effect of acupuncture pretreatment of "Quchi"(LI11) and "Xuehai" (SP10) on mast cells and IL-33/ST2 in rats with urticaria].

OBJECTIVE: To observe the effect of electroacupuncture (EA) pretreatment at "Quchi "(LI11) and "Xuehai "(SP10) on expression of interleukin (IL)-33, suppression of tumorigenicity 2 (ST2) and mast cell degranulation in sensitive area of skin tissue in rats with urticaria, so as to explore its mechanisms underlying prevention of urticaria. METHODS: A total of 32 male SD rats were randomly divided into blank control, model, EA preconditioning and medication groups, with 8 rats in each group. The urticaria model was established by topical injection of the prepared anti-ovalbumin serum (foreign serum, 0.1 mL/spot) along the bilateral sides of the spinal column on the back, followed by injection of mixture solution of ovalbumin, 0.5% evans blue and normal saline via the tail vein 48 h later. EA intervention (2 Hz/15 Hz, 1 mA) was applied to bilateral LI11 and SP10 for 20 min, once daily for 7 d before modeling.Back sensitization was started from the 5th day on. Rats of the medication group received gavage of loratadine, and those of the model group received gavage of the same volume of normal saline. The diameter of evans blue spots at the back skin tissue was measured; the histopathological changes of the blue spot tissues were observed by light microscope after H.E. staining. The state of degranulation of mast cells in the subcutaneous loose connective tissue was observed by using toluidine blue staining. Serum IgE and histamine contents were detected by ELISA, and the immunoactivity of IL-33 and ST2 in the skin and subcutaneous tissues of the sensitized spots (evans blue exudation spots) was observed by immunohistochemistry. RESULTS: Compared with the blank control group, the diameter of evans blue spot, degranulation rate of mast cells, serum IgE and histamine contents, and the immunoactivity of IL-33 and ST2 in the evans blue exudation spot tissues were significantly increased in the model group (P<0.01). In comparison with the model group, the increase of the above-mentioned indexes was reversed in both EA and medication groups (P<0.01，P<0.05). No significant differences were found between the EA and medication groups in down-regulating the levels of the 6 indexes. H.E. staining of the blue spot tissues of rats in the model group showed incomplete structure of the epidermal layer of the skin, unclear interface of tissues, incomplete keratinization, chaotic epidermal cells, disorderly arrangement of fibers in the dermis, and infiltration of inflammatory cells and edema, which was relatively milder in the EA and medication groups. CONCLUSION: EA preconditioning can prevent urticaria (reduce size and sensitive reactions) in rats, which may be associated with its functions in lowering the level of IgE through inhibiting IL-33 and ST2.

[Electroacupuncture preconditioning relieves cutaneous passive anaphylaxis by down-regulating IP3 mediated ROS/TRPM2 signaling pathway and inhibiting mast cell degranulation in rats with urticaria].

OBJECTIVE: To observe the effect of electroacupuncture (EA) preconditioning of "Quchi" (LI11) and "Xuehai" (SP10) on mast cell (MC) degranulation, and expressions of inositol triphosphate(IP3), reactive oxygen species (ROS), transient receptor potential (TRP) M2, calmodulin (CaM) in rats with urticaria, so as to reveal its molecular mechanism under-lying improving urticaria. METHODS: Thirty-two male SD rats were randomly divided into blank control, model, preconditioning of EA (Pre-EA) and medication groups (n=8 rats/group). The urticaria model was established by intradermal injection of dilute allogeneic antioalbumin serum at the spots of the bilateral symmetry of the spine on the back, and followed by tail venous injection of mixture solution of egg albumin diluent, plus 0.5% Evans blue and normal saline. Ten days before the end of modeling, rats of the pre-EA group received EA stimulation of LI11 and SP10 for 20 min, once a day for 10 consecutive days, and those of the medication group received gavage of loratadine tablets diluted solution (1 mg/kg) once a day for 10 days. The times of rat's scratching the sensitized skin were recorded, the diameter of the sensitized blue spots was measured and the degranulation rate of skin MCs was counted under microscope after toluidine blue staining. The expression levels of IP3, ROS, TRPM2 and CaM in the skin tissue were measured by immunohistochemistry and western blot, respectively. RESULTS: Compared with the blank control group, the scratching times, diameter of the sensitized blue spots, degranulation rate of MCs, and the expression levels of ion channel related proteins (IP3, ROS, TRPM2 and CaM) were significantly increased (P<0.01) in the model group. In comparison with the model group, the scratching times, diameter of sensitized blue spot, degranulation rate of MCs, and the expression levels of IP3, ROS, TRPM2 and CaM in both pre-EA and medication groups were significantly down-regulated (P<0.01, P<0.05). No significant differences were found between Pre-EA and medication groups in down-regulating the levels of the above-mentioned 7 indexes. CONCLUSION: EA-LI11 and SP10 preconditioning can reduce the cutaneous anaphylaxis in urticaria rats, which may be related to its effects in inhibiting the degranulation of MCs, and the expression of TRP channel related proteins.

Seroprevalence and Molecular Characterization of Brucella abortus from the Himalayan Marmot in Qinghai, China.

Objective: Brucellosis is a serious public health issue in Qinghai (QH), China. Surveying the seroprevalence and isolation of B. abortus strains from marmots is key to understanding the role of wildlife in the maintenance and spread of brucellosis. Methods: In this study, a set of methods, including a serology survey, bacteriology, antibiotic susceptibility, molecular genotyping (MLST and MLVA), and genome sequencing, were employed to characterize the two B. abortus strains. Results: The seroprevalence of brucellosis in marmots was 7.0% (80/1146) by serum tube agglutination test (SAT); one Brucella strain was recovered from these positive samples, and another Brucella strain from a human. Two strains were identified as B. abortus bv. 1 and were susceptible to all eight drugs examined. The distribution patterns of the accessory genes, virulence associated genes, and resistance genes of the two strains were consistent, and there was excellent collinearity between the two strains on chromosome I, but they had significant SVs in chromosome II, including inversions and translocations. MLST genotyping identified two B. abortus strains as ST2, and MLVA-16 analysis showed that the two strains clustered with strains from northern China. WGS-SNP phylogenetic analysis showed that the strains were genetically homogeneous with strains from the northern region, implying that strains from a common lineage were spread continuously in different regions and hosts. Conclusion: Seroprevalence and molecular clues demonstrated frequent direct or indirect contact between sheep/goats, cattle, and marmots, implying that wildlife plays a vital role in the maintenance and spread of B. abortus in the Qinghai-Tibet Plateau.

Effects of Cavity Thickness on the Replication of Micro Injection Molded Parts with Microstructure Array.

Parts with microstructure arrays have been widely used in biotechnologies and optical technologies, and their performances are affected by replication uniformity. The uniformity of the microstructure is still a challenge in micro-injection molded parts and is greatly affected by the cavity thickness and process parameters. In this study, the replication uniformity of microstructures is experimentally investigated. The relationship between the replication uniformity and cavity thickness was explored through single-factor experiments. Additionally, the impacts of the process parameters on the replication uniformity were also studied through uniform design experiments. A regression equation was established to describe the quantitative relationship between the important parameters and replication uniformity. The results showed that the replication uniformity of microstructures increases by 39.82% between the cavity with the thickness of 0.5 mm and a cavity of 0.7 mm. In addition, holding time is the most significant factor influencing the replication uniformity, followed by mold temperature, melt temperature, and injection speed. It is concluded that the thickness of cavity and the process parameters have significant influence on the replication uniformity. The experimental results provide important data on how to improve the replication uniformity of parts with microstructure arrays.

Effectiveness and safety of acupuncture for chronic obstructive pulmonary disease: A protocol for systematic review and meta-analysis.

BACKGROUND: Chronic Obstructive Pulmonary Disease (COPD) is the most common respiratory disease in clinic. Traditional Chinese medicine (TCM) lung rehabilitation has gradually been valued in the field of prevention and treatment of COPD. Acupuncture, as an important part of TCM lung rehabilitation, is carried out in clinical extensively and application. It has the advantage of improving the symptoms and quality of life of COPD cases, but the evidence-based proof is limited. METHODS: Eight databases will be systematically retrieved from their inceptions to December 2021. This study will include randomized controlled trials of acupuncture in the treatment of COPD with stable stage. The main outcome will include clinical effective rate, TCM symptom score, quality of life, dyspnea, exercise capacity, lung function, frequency of acute exacerbation, adverse events. Literature screening, quality evaluation and information extraction will be completed by two independent researchers. Revman 5.3 software will be used to perform meta-analysis. Assessment of multiple systematic reviews-2 tool will be used for evaluating the methodological quality of systematic review (SR), grading of recommendations assessment will for rating the quality of evidence, and consolidated standards of reporting trials and Standards for Reporting Interventions in Clinical Trials of Acupuncture tool will for assessing the reporting quality of randomized controlled trials. RESULTS: The findings of this SR will be presented at relevant conferences and submitted for peer-review publication. CONCLUSIONS: The findings of this SR will provide up-to-date summary proof for evaluating the effectiveness and safety of acupuncture for COPD.

Recent advances in high- ß N experiments and magnetohydrodynamic instabilities with hybrid scenarios in the HL-2A Tokamak.

Over the past several years, high- ß N experiments have been carried out on HL-2A. The high- ß N is realized using double transport barriers (DTBs) with hybrid scenarios. A stationary high- ß N ( > 2 ) scenario was obtained by pure neutral-beam injection (NBI) heating. Transient high performance was also achieved, corresponding to ß N ≥ 3 , n e / n e G ∼ 0.6 , H 98 ∼ 1.5 , f b s ∼ 30 % , q 95 ∼ 4.0 , and G ∼ 0.4 . The high- ß N scenario was successfully modeled using integrated simulation codes, that is, the one modeling framework for integrated tasks (OMFIT). In high- ß N plasmas, magnetohydrodynamic (MHD) instabilities are abundant, including low-frequency global MHD oscillation with n = 1, high-frequency coherent mode (HCM) at the edge, and neoclassical tearing mode (NTM) and Alfvénic modes in the core. In some high- ß N discharges, it is observed that the NTMs with m / n = 3 / 2 limit the growth of the plasma energy and decrease ß N . The low-n global MHD oscillation is consistent with the coupling of destabilized internal (m/n = 1/1) and external (m/n = 3/1 or 4/1) modes, and plays a crucial role in triggering the onset of ELMs. Achieving high- ß N on HL-2A suggests that core-edge interplay is key to the plasma confinement enhancement mechanism. Experiments to enhance ß N will contribute to future plasma operation, such as international thermonuclear experimental reactor .

Reducing the Burn Marks on Injection-Molded Parts by External Gas-Assisted Injection Molding.

A burn mark is a sort of serious surface defect on injection-molded parts. In some cases, it can be difficult to reduce the burn marks by traditional methods. In this study, external gas-assisted injection molding (EGAIM) was introduced to reduce the burn marks, as EGAIM has been reported to reduce the holding pressure. The parts with different severities of burn marks were produced by EGAIM and conventional injection molding (CIM) with the same molding parameters but different gas parameters. The burn marks were quantified by an image processing method and the quantitative method was introduced to discuss the influence of the gas parameters on burn marks. The results show that the burn marks can be eliminated by EGAIM without changing the structure of the part or the mold, and the severity of the burn marks changed from 4.98% with CIM to 0% with EGAIM. Additionally, the gas delay time is the most important gas parameter affecting the burn marks.

Multiscale Modeling and Simulation of Polymer Blends in Injection Molding: A Review.

Modeling and simulation of the morphology evolution of immiscible polymer blends during injection molding is crucial for predicting and tailoring the products' performance. This paper reviews the state-of-the-art progress in the multiscale modeling and simulation of injection molding of polymer blends. Technological development of the injection molding simulation on a macroscale was surveyed in detail. The aspects of various models for morphology evolution on a mesoscale during injection molding were discussed. The current scale-bridging strategies between macroscopic mold-filling flow and mesoscopic morphology evolution, as well as the pros and cons of the solutions, were analyzed and compared. Finally, a comprehensive summary of the above models is presented, along with the outlook for future research in this field.

Warpage Prediction of RHCM Crystalline Parts Based on Multi-Layers.

Warpage is a typical defect for injection-molded parts, especially for crystalline parts molded by rapid heat cycle molding (RHCM). In this paper, a prediction method is proposed for predicting the warpage of crystalline parts molded by the RHCM process. Multi-layer models were established to predict warpage with the same thicknesses as the skin-core structures in the molded parts. Warpages were defined as the deformations calculated by the multi-layer models. The deformations were solved using the classical laminated plate theory by Abaqus. A model was introduced to describe the elastic modulus with the influence of temperature and crystallinity. The simulation process was divided into two procedures, before ejection and after ejection. Thermal stresses and thermal strains were simulated, respectively, in the procedure before ejection and after ejection. The prediction results were compared with the experimental results, which showed that the average errors between predicted warpage and average experimental warpage are, respectively, 7.0%, 3.5%, and 4.4% in conventional injection molding (CIM), in RHCM under a 60 °C heating mold (RHCM60), and in RHCM under a 90 °C heating mold (RHCM90).

Molecular characteristics of Brucella melitensis isolates from humans in Qinghai Province, China.

BACKGROUND: The prevalence of human brucellosis in Qinghai Province of China has been increasing rapidly, with confirmed cases distributed across 31 counties. However, the epidemiology of brucellosis transmission has not been fully elucidated. To characterize the infecting strains isolated from humans, multiple-locus variable-number tandem repeats analysis (MLVA) and whole-genome single-nucleotide polymorphism (SNP)-based approaches were employed. METHODS: Strains were isolated from two males blood cultures that were confirmed Brucella melitensis positive following biotyping and MLVA. Genomic DNA was extracted from these two strains, and whole-genome sequencing was performed. Next, SNP-based phylogenetic analysis was performed to compare the two strains to 94 B. melitensis strains (complete genome and draft genome) retrieved from online databases. RESULTS: The two Brucella isolates were identified as B. melitensis biovar 3 (QH2019001 and QH2019005) following conventional biotyping and were found to have differences in their variable number tandem repeats (VNTRs) using MLVA-16. Phylogenetic examination assigned the 96 strains to five genotype groups, with QH2019001 and QH2019005 assigned to the same group, but different subgroups. Moreover, the QH2019005 strain was assigned to a new subgenotype, IIj, within genotype II. These findings were then combined to determine the geographic origin of the two Brucella strains. CONCLUSIONS: Utilizing a whole-genome SNP-based approach enabled differences between the two B. melitensis strains to be more clearly resolved, and facilitated the elucidation of their different evolutionary histories. This approach also revealed that QH2019005 is a member of a new subgenotype (IIj) with an ancient origin in the eastern Mediterranean Sea.