Diverse high-affinity DNA aptamers for wild-type and B.1.1.7 SARS-CoV-2 spike proteins from a pre-structured DNA library.

We performed in vitro selection experiments to identify DNA aptamers for the S1 subunit of the SARS-CoV-2 spike protein (S1 protein). Using a pool of pre-structured random DNA sequences, we obtained over 100 candidate aptamers after 13 cycles of enrichment under progressively more stringent selection pressure. The top 10 sequences all exhibited strong binding to the S1 protein. Two aptamers, named MSA1 (Kd = 1.8 nM) and MSA5 (Kd = 2.7 nM), were assessed for binding to the heat-treated S1 protein, untreated S1 protein spiked into 50% human saliva and the trimeric spike protein of both the wildtype and the B.1.1.7 variant, demonstrating comparable affinities in all cases. MSA1 and MSA5 also recognized the pseudotyped lentivirus of SARS-CoV-2 with respective Kd values of 22.7 pM and 11.8 pM. Secondary structure prediction and sequence truncation experiments revealed that both MSA1 and MSA5 adopted a hairpin structure, which was the motif pre-designed into the original library. A colorimetric sandwich assay was developed using MSA1 as both the recognition element and detection element, which was capable of detecting the pseudotyped lentivirus in 50% saliva with a limit of detection of 400 fM, confirming the potential of these aptamers as diagnostic tools for COVID-19 detection.

A Simple Colorimetric Au-on-Au Tip Sensor with a New Functional Nucleic Acid Probe for Food-borne Pathogen Salmonella typhimurium.

An Au-on-Au tip sensor is developed for the detection of Salmonella typhimurium (Salmonella), using a new synthetic nucleic acid probe (NAP) as a linker for the immobilization of a DNA-conjugated Au nanoparticle (AuNP) onto a DNA-attached thin Au layer inside a pipette tip. In the presence of Salmonella, RNase H2 from Salmonella (STH2) cleaves the NAP and the freed DNA-conjugated AuNP can be visually detected by a paper strip. This portable biosensor does not require any electronic, electrochemical or optical equipment. It delivers a detection limit of 3.2×103  CFU mL-1 for Salmonella in 1 h without cell-culturing or signal amplification and does not show cross-reactivity with several control bacteria. Further, the sensor reliably detects Salmonella spiked in food samples, such as ground beef and chicken, milk, and eggs. The sensor can be reused and is stable at ambient temperature, showing its potential as a point-of-need device for the prevention of food poisoning by Salmonella.

A Colorimetric Biosensing Platform with Aptamers, Rolling Circle Amplification and Urease-Mediated Litmus Test.

Here we report on an ultra-sensitive colorimetric sensing platform that takes advantage of both the strong amplification power of rolling circle amplification (RCA) and the high efficiency of a simple urease-mediated litmus test. The presence of a target triggers the RCA reaction, and urease-labelled DNA can hybridize to the biotinylated RCA products and be immobilized onto streptavidin-coated magnetic beads. The urease-laden beads are then used to hydrolyze urea, leading to an increase in pH that can be detected by a simple litmus test. We show this sensing platform can be easily integrated with aptamers for sensing diverse targets via the detection of human thrombin and platelet-derived growth factor (PDGF) utilizing structure-switching aptamers as well as SARS-CoV-2 in human saliva using a spike-binding trimeric DNA aptamer. Furthermore, we demonstrate that this colorimetric sensing platform can be integrated into a simple paper-based device for sensing applications.

Three on Three: Universal and High-Affinity Molecular Recognition of the Symmetric Homotrimeric Spike Protein of SARS-CoV-2 with a Symmetric Homotrimeric Aptamer.

Our previously discovered monomeric aptamer for SARS-CoV-2 (MSA52) possesses a universal affinity for COVID-19 spike protein variants but is ultimately limited by its ability to bind only one subunit of the spike protein. The symmetrical shape of the homotrimeric SARS-CoV-2 spike protein presents the opportunity to create a matching homotrimeric molecular recognition element that is perfectly complementary to its structural scaffold, causing enhanced binding affinity. Here, we describe a branched homotrimeric aptamer with three-fold rotational symmetry, named TMSA52, that not only possesses excellent binding affinity but is also capable of binding several SARS-CoV-2 spike protein variants with picomolar affinity, as well as pseudotyped lentiviruses expressing SARS-CoV-2 spike protein variants with femtomolar affinity. Using Pd-Ir nanocubes as nanozymes in an enzyme-linked aptamer binding assay (ELABA), TMSA52 was capable of sensitively detecting diverse pseudotyped lentiviruses in pooled human saliva with a limit of detection as low as 6.3 × 103 copies/mL. The ELABA was also used to test 50 SARS-CoV-2-positive and 60 SARS-CoV-2-negative patient saliva samples, providing sensitivity and specificity values of 84.0 and 98.3%, respectively, thus highlighting the potential of TMSA52 for the development of future rapid tests.

A Universal DNA Aptamer that Recognizes Spike Proteins of Diverse SARS-CoV-2 Variants of Concern.

Invited for the cover of this issue are John Brennan, Yingfu Li, and co-workers at McMaster University. The image depicts MSA52 as a universal DNA aptamer that recognizes spike proteins of diverse SARS-CoV-2 variants of concern. Read the full text of the article at 10.1002/chem.202200078.

A Universal DNA Aptamer that Recognizes Spike Proteins of Diverse SARS-CoV-2 Variants of Concern.

We report on a unique DNA aptamer, denoted MSA52, that displays universally high affinity for the spike proteins of wildtype SARS-CoV-2 as well as the Alpha, Beta, Gamma, Epsilon, Kappa, Delta and Omicron variants. Using an aptamer pool produced from round 13 of selection against the S1 domain of the wildtype spike protein, we carried out one-round SELEX experiments using five different trimeric spike proteins from variants, followed by high-throughput sequencing and sequence alignment analysis of aptamers that formed complexes with all proteins. A previously unidentified aptamer, MSA52, showed Kd values ranging from 2 to 10 nM for all variant spike proteins, and also bound similarly to variants not present in the reselection experiments. This aptamer also recognized pseudotyped lentiviruses (PL) expressing eight different spike proteins of SARS-CoV-2 with Kd values between 20 and 50 pM, and was integrated into a simple colorimetric assay for detection of multiple PL variants. This discovery provides evidence that aptamers can be generated with high affinity to multiple variants of a single protein, including emerging variants, making it well-suited for molecular recognition of rapidly evolving targets such as those found in SARS-CoV-2.

One-pot high-yield synthesis of Pd nanocubes for Pd-Ir nanocube-based immunoassay of nucleocapsid protein from SARS-CoV-2.

Pd-Ir nanocubes are promising peroxidase-mimicking nanozymes for immunoassays, enabled by their excellent stability, relatively high catalytic activity, and reproducible performance. A key step involved in the preparation of Pd-Ir nanocubes is the synthesis of Pd nanocubes. However, the traditional method to synthesize Pd nanocubes requires sophisticated and expensive equipment to precisely control the reaction temperature and highly skilled technicians to achieve satisfactory and reproducible product yields. Herein, we report a simple, cost-effective, high-yield (> 99%) and one-pot strategy to synthesize Pd nanocubes with sizes of 7, 18, and 51 nm for the preparation of Pd-Ir nanocubes. The resulting 18 nm Pd-Ir nanocubes display three orders of magnitude higher peroxidase activity compared to horseradish peroxidase, leading to a significantly increased detection sensitivity when applied in the immunoassay of nucleocapsid protein from SARS-CoV-2. Due to the simplicity in both material synthesis and assaying procedures and the excellent detection sensitivity, our method should allow for the generalized application of Pd-Ir nanocube-based immunoassays for the diagnosis of human diseases.

High-Affinity Dimeric Aptamers Enable the Rapid Electrochemical Detection of Wild-Type and B.1.1.7 SARS-CoV-2 in Unprocessed Saliva.

We report a simple and rapid saliva-based SARS-CoV-2 antigen test that utilizes a newly developed dimeric DNA aptamer, denoted as DSA1N5, that specifically recognizes the spike proteins of the wildtype virus and its Alpha and Delta variants with dissociation constants of 120, 290 and 480 pM, respectively, and binds pseudotyped lentiviruses expressing the wildtype and alpha trimeric spike proteins with affinity constants of 2.1 pM and 2.3 pM, respectively. To develop a highly sensitive test, DSA1N5 was immobilized onto gold electrodes to produce an electrochemical impedance sensor, which was capable of detecting 1000 viral particles per mL in 1:1 diluted saliva in under 10 min without any further sample processing. Evaluation of 36 positive and 37 negative patient saliva samples produced a clinical sensitivity of 80.5 % and specificity of 100 % and the sensor could detect the wildtype virus as well as the Alpha and Delta variants in the patient samples, which is the first reported rapid test that can detect any emerging variant of SARS-CoV-2.

Circular Nucleic Acids: Discovery, Functions and Applications.

Circular nucleic acids (CNAs) are nucleic acid molecules with a closed-loop structure. This feature comes with a number of advantages including complete resistance to exonuclease degradation, much better thermodynamic stability, and the capability of being replicated by a DNA polymerase in a rolling circle manner. Circular functional nucleic acids, CNAs containing at least a ribozyme/DNAzyme or a DNA/RNA aptamer, not only inherit the advantages of CNAs but also offer some unique application opportunities, such as the design of topology-controlled or enabled molecular devices. This article will begin by summarizing the discovery, biogenesis, and applications of naturally occurring CNAs, followed by discussing the methods for constructing artificial CNAs. The exploitation of circular functional nucleic acids for applications in nanodevice engineering, biosensing, and drug delivery will be reviewed next. Finally, the efforts to couple functional nucleic acids with rolling circle amplification for ultra-sensitive biosensing and for synthesizing multivalent molecular scaffolds for unique applications in biosensing and drug delivery will be recapitulated.

A DNA Switch for Detecting Single Nucleotide Polymorphism within a Long DNA Sequence Under Denaturing Conditions.

Invited for the cover of this issue is the group of Yingfu Li at McMaster University. The image depicts a molecular switch for ultra-specific detection of DNA utilizing a guanine-quadruplex (up-right structure) resistant to denaturation by urea (ball-and-stick structures). Read the full text of the article at 10.1002/chem.201903536.

A DNA Switch for Detecting Single Nucleotide Polymorphism within a Long DNA Sequence Under Denaturing Conditions.

DNA detection is usually conducted under nondenaturing conditions to favor the formation of Watson-Crick base-paring interactions. However, although such a setting is excellent for distinguishing a single-nucleotide polymorphism (SNP) within short DNA sequences (15-25 nucleotides), it does not offer a good solution to SNP detection within much longer sequences. Here we report on a new detection method capable of detecting SNP in a DNA sequence containing 35-90 nucleotides. This is achieved through incorporating into the recognition DNA sequence a previously discovered DNA molecule that forms a stable G-quadruplex in the presence of 7 molar urea, a known condition for denaturing DNA structures. The systems are configured to produce both colorimetric and fluorescent signals upon target binding.

Surface-Enhanced Raman Scattering Active Plasmonic Nanoparticles with Ultrasmall Interior Nanogap for Multiplex Quantitative Detection and Cancer Cell Imaging.

Due to its large enhancement effect, nanostructure-based surface-enhanced Raman scattering (SERS) technology had been widely applied for bioanalysis and cell imaging. However, most SERS nanostructures suffer from poor signal reproducibility, which hinders the application of SERS nanostructures in quantitative detection. We report an etching-assisted approach to synthesize SERS-active plasmonic nanoparticles with 1 nm interior nanogap for multiplex quantitative detection and cancer cell imaging. Raman dyes and methoxy poly(ethylene glycol) thiol (mPEG-SH) were attached to gold nanoparticles (AuNPs) to prepare gold cores. Next, Ag atoms were deposited on gold cores in the presence of Pluronic F127 to form a Ag shell. HAuCl4 was used to etch the Ag shell and form an interior nanogap in Au@AgAuNPs, leading to increased Raman intensity of dyes. SERS intensity distribution of Au@AgAuNPs was found to be more uniform than that of aggregated AuNPs. Finally, Au@AgAuNPs were used for multiplex quantitative detection and cancer cell imaging. With the advantages of simple and rapid preparation of Au@AgAuNPs with highly uniform, stable, and reproducible Raman intensity, the method reported here will widen the applications of SERS-active nanoparticles in diagnostics and imaging.

DNA-Mediated Morphological Control of Silver Nanoparticles.

It is demonstrated that DNA can be used to control the synthesis of silver nanoplates with different morphologies using spherical silver seeds. UV-vis spectroscopy, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy are used to characterize the synthesized nanoparticles. Silver nanoprisms are encoded by poly C and poly G, while silver flower bouquets and silver nanodiscs are synthesized using poly A and poly T, respectively. The length of DNA is found to have little effect on the morphology of silver nanoparticles. Moreover, the synthesized silver nanoplates are found to have high surface enhanced Raman scattering enhancement ability, good antibacterial activity, and good biocompatibility. These discoveries will broaden the application of DNA in nanoscience and will provide a new platform to investigate the interaction between DNA sequences and silver nanoparticles.

Label-free surface-enhanced Raman spectroscopy detection of DNA with single-base sensitivity.

Direct, label-free detection of unmodified DNA is a great challenge for DNA analyses. Surface-enhanced Raman spectroscopy (SERS) is a promising tool for DNA analyses by providing intrinsic chemical information with a high sensitivity. To address the irreproducibility in SERS analysis that hampers reliable DNA detection, we used iodide-modified Ag nanoparticles to obtain highly reproducible SERS signals of single- and double-strand DNA in aqueous solutions close to physiological conditions. The phosphate backbone signal was used as an internal standard to calibrate the absolute signal of each base for a more reliable determination of the DNA structure, which has not been achieved before. Clear identification of DNA with single-base sensitivity and the observation of a hybridization event have been demonstrated.

Simple and Rapid Functionalization of Gold Nanorods with Oligonucleotides Using an mPEG-SH/Tween 20-Assisted Approach.

DNA conjugated gold nanorods (AuNRs) are widely applied for nanostructure assembly, gene therapy, biosensing, and drug delivery. However, it is still a great challenge to attach thiolated DNA on AuNRs, because the positively charged AuNRs readily aggregate in the presence of negatively charged DNA. This article reports an mPEG-SH/Tween 20-assisted method to load thiolated DNA on AuNRs in 1 h. Tween 20 and mPEG-SH are used to synergistically displace CTAB on the surface of AuNRs by repeated centrifugation and resuspension, and thiolated DNA are attached to AuNRs in the presence of 1 M NaCl, 100 mM MgCl2, or 100 mM citrate. AuNRs with different sizes and aspect ratios can be functionalized with DNA by this method. The number of DNA loaded on each AuNR can be easily controlled by the concentrations of mPEG-SH and Tween 20 or the ratio between DNA and AuNR. Functionalized AuNRs were used for nanoparticle assembly and cancer cell imaging to confirm that DNA anchored on the surface of AuNRs retains its hybridization and molecular recognition capability. The new method is easy, rapid, and robust for the preparation of DNA functionalized AuNRs for a variety of applications such as cancer therapy, drug delivery, self-assembly, and imaging.

Translating Molecular Recognition into a Pressure Signal to enable Rapid, Sensitive, and Portable Biomedical Analysis.

Herein, we demonstrate that a very familiar, yet underutilized, physical parameter­gas pressure­can serve as signal readout for highly sensitive bioanalysis. Integration of a catalyzed gas-generation reaction with a molecular recognition component leads to significant pressure changes, which can be measured with high sensitivity using a low-cost and portable pressure meter. This new signaling strategy opens up a new way for simple, portable, yet highly sensitive biomedical analysis in a variety of settings.

Advancing In Situ Food Monitoring through a Smart Lab-in-a-Package System Demonstrated by the Detection of Salmonella in Whole Chicken.

With food production shifting away from traditional farm-to-table approaches to efficient multistep supply chains, the incidence of food contamination has increased. Consequently, pathogen testing via inefficient culture-based methods has increased, despite its lack of real-time capabilities and need for centralized facilities. While in situ pathogen detection would address these limitations and enable individual product monitoring, accurate detection within unprocessed, packaged food products without user manipulation has proven elusive. Herein, "Lab-in-a-Package" is presented, a platform capable of sampling, concentrating, and detecting target pathogens within closed food packaging, without intervention. This system consists of a newly designed packaging tray and reagent-infused membrane that can be paired universally with diverse pathogen sensors. The inclined food packaging tray maximizes fluid localization onto the sensing interface, while the membrane acts as a reagent-immobilizing matrix and an antifouling barrier for the sensor. The platform is substantiated using a newly discovered Salmonella-responsive nucleic acid probe, which enables hands-free detection of 103 colony forming units (CFU) g-1 target pathogen in a packaged whole chicken. The platform remains effective when contamination is introduced with toolsand surfaces, ensuring widespread efficacy. Its real-world use for in situ detection is simulated using a handheld fluorescence scanner with smartphone connectivity.

One Solution for All: Searching for Universal Aptamers for Constantly Mutating Spike Proteins of SARS-CoV-2.

Aptamers that can recognize the spike (S) protein of SARS-CoV-2 with high affinity and specificity are useful molecules towards the development of diagnostics and therapeutics to fight COVID-19. However, this S protein is constantly mutating, producing variants of concern (VoCs) that can significantly weaken the binding by aptamers initially engineered to recognize the S protein of the wildtype virus or a specific VoC. One strategy to overcome this problem is to develop universal aptamers that are insensitive to all or most of the naturally emerging mutations in the protein. We have recently demonstrated this concept by subjecting a pool of S protein-binding DNA aptamers for one-round parallel-SELEX experiments targeting 5 different S protein variants for binding-based sequence enrichment, followed by bioinformatic analysis of the enriched pools. This effort has led to the identification of a universal aptamer that recognizes 8 different variants of the spike protein with equally excellent affinity.

Aptamers for SARS-CoV-2: Isolation, Characterization, and Diagnostic and Therapeutic Developments.

The SARS-CoV-2 virus and COVID-19 pandemic continue to demand effective diagnostic and therapeutic solutions. Finding these solutions requires highly functional molecular recognition elements. Nucleic acid aptamers represent a possible solution. Characterized by their high affinity and specificity, aptamers can be rapidly identified from random-sequence nucleic acid libraries. Over the past two years, many labs around the world have rushed to create diverse aptamers that target two important structural proteins of SARS-CoV-2: the spike (S) protein and nucleocapsid (N) protein. These have led to the identification of many aptamers that show real promise for the development of diagnostic tests and therapeutic agents for SARS-CoV-2. Herein we review all these developments, with a special focus on the development of diverse aptasensors for detecting SARS-CoV-2. These include electrochemical and optical sensors, lateral flow devices, and aptamer-linked immobilized sorbent assays.

Cover Feature: Aptamers for SARS-CoV-2: Isolation, Characterization, and Diagnostic and Therapeutic Developments (Anal. Sens. 5/2022).

The cover feature image shows nucleic acid aptamers armed and ready for our battle against the monstrous SARS-CoV-2 virus. Often thought of as "chemical antibodies", these molecular recognition elements are equipped with several unique benefits and have thus been a popular research subject worldwide. Many aptamers for recognizing the spike and nucleocapsid proteins of SARS-CoV-2 have been developed and examined as diagnostic and therapeutic weaponry for the war against COVID-19 and future pandemics. More information can be found in the Review by J. D. Brennan, Y. Li, and co-workers.