Association of the triglyceride-glucose index and its related parameters with frailty.

BACKGROUND: Frailty is a dynamic geriatric condition. Limited studies have examined the association of the triglyceride-glucose (TyG) index and its related indicators [TyG index, triglyceride glucose-waist to height ratio (TyG-WHtR), triglyceride glucose-waist circumference (TyG-WC), and triglyceride glucose-body mass index (TyG-BMI)] with frailty, and the potential links among them remain unclear. On the basis of data from the National Health and Nutrition Examination Survey (NHANES), this study investigated the potential relationships of the TyG index and its related indices with frailty. METHODS: This research included 7,965 participants from NHANES 2003-2018. The relationship of the TyG index and its related indices with frailty was investigated with binary logistic regression analyses, restricted cubic spline (RCS), and receiver operating characteristic (ROC) curve. Potential influences were further investigated through stratified analyses and interaction tests. RESULTS: The prevalence of frailty in the participants of this study was 25.59%, with a average frailty index of 0.16 (0.00). In the three regression analysis models, the continuous TyG index and its associated indices were positively associated with frailty. In addition, quartiles of TyG, TyG-WC, TyG-WHtR, and TyG-BMI were significantly associated with increased frailty prevalence in the fully adjusted models (TyG Q4 vs. Q1, OR = 1.58, 95% CI: 1.19, 2.09, P = 0.002; TyG-WC Q4 vs. Q1, OR = 2.40, 95% CI: 1.90, 3.04, P < 0.001; TyG-WHtR Q4 vs. Q1, OR = 2.26, 95% CI: 1.82, 2.81, P < 0.001; TyG- BMI Q4 vs. Q1, OR = 2.16, 95% CI: 1.76, 2.64, P < 0.001). According to RCS analysis, TyG, TyG-WC, TyG-WHtR, and TyG-BMI were linearly and positively associated with frailty. ROC curves revealed that TyG-WHtR (AUC: 0.654) had greater diagnostic value for frailty than TyG (AUC: 0.604), TyG-BMI (AUC: 0.621), and TyG-WC (AUC: 0.629). All of the stratified analyses and interaction tests showed similar results. CONCLUSIONS: Elevated TyG and its associaed indices are associated with an increased prevalence of frailty. Reasonable control of blood glucose and blood lipids, and avoidance of obesity, may aid in reducing the occurrence of frailty in middle-aged and older adults.

A facile synthesis of FeS/Fe3C nanoparticles highly dispersed on in situ grown N-doped CNTs as cathode electrocatalysts for microbial fuel cells.

A novel composite of iron sulfide, iron carbide and nitrogen carbides (Nano-FeS/Fe3C@NCNTs) as a cathode electrocatalyst for microbial fuel cells (MFCs) is synthesized by a one-pot solid state reaction, which yields a unique configuration of FeS/Fe3C nanoparticles highly dispersed on in situ grown nitrogen-doped carbon nanotubes (NCNTs). The highly dispersed FeS/Fe3C nanoparticles possess large active sites, while the NCNTs provide an electronically conductive network. Consequently, the resultant Nano-FeS/Fe3C@NCNTs exhibit excellent electrocatalytic activity towards the oxygen reduction reaction (ORR), with a half-wave potential close to that of Pt/C (about 0.88 V vs. RHE), and enable MFCs to deliver a power density of 1.28 W m-2 after two weeks' operation, which is higher than that of MFCs with Pt/C as the cathode electrocatalyst (1.02 W m-2). Theoretical calculations and experimental data demonstrate that there is a synergistic effect between Fe3C and FeS in Nano-FeS/Fe3C@NCNTs. Fe3C presents a strong attraction and electron-donating tendency to oxygen molecules, serving as the main active component, while FeS reduces charge transfer resistance by transferring electrons to Fe3C, synergistically improving the kinetics of the ORR and power density of MFCs.

High power density output and durability of microbial fuel cells enabled by dispersed cobalt nanoparticles on nitrogen-doped carbon as the cathode electrocatalyst.

To endow microbial fuel cells (MFCs) with low cost, long-term stability and high-power output, a novel cobalt-based cathode electrocatalyst (Nano-Co@NC) is synthesized from a polygonal metal-organic framework ZIF-67. After calcining the resultant ZIF-67, the as-synthesized Nano-Co@NC is characteristic of cobalt nanoparticles (Nano-Co) embedded in nitrogen-doped carbon (NC) that inherits the morphology of ZIF-67 with a large surface area. The Nano-Co particles that are highly dispersed and firmly fixed on NC not only ensure electrocatalytic activity of Nano-Co@NC toward the oxygen reduction reaction on the cathode, but also inhibit the growth of non-electrogenic bacteria on the anode. Consequently, the MFC using Nano-Co@NC as the cathode electrocatalyst demonstrates excellent performance, delivering a comparable initial power density and exhibiting far better durability than that using Pt/C (20 wt%) as the cathode electrocatalyst. The low cost and the excellent performance of Nano-Co@NC make it promising for MFCs to be used in practice.

Strong adsorption, catalysis and lithiophilic modulation of carbon nitride for lithium/sulfur battery.

Lithium/sulfur (Li/S) batteries have emerged as one of the most promising next-generation energy storage systems with advantages of high theoretical energy density, low cost and environmental friendliness. However, problems regarding to severe shuttle effect of soluble polysulfide, poor electronic/ionic conductor of solid charged/discharged products (S8 and Li2S), and fatal swell of volume along with the growth of Li dendrites greatly deteriorate the sulfur utilization and capacity retention during extended charge-discharge cycles. With advantages of high nitrogen content, lithiophilic modulation and tunable charge density and charge transfer, carbon nitride (g-C3N4) has played a positive role in restricting the shuttle effects and dendrite formation. This minireview mainly discusses these research achievements of g-C3N4 in Li/S batteries, aiming to provide a basic understanding and direct guidance for further research and development of functionalized g-C3N4 materials in electrical energy storage. The two-dimensional (2D) structure of g-C3N4 with abundant hierarchical pores improves its accommodation capacity for sulfur by effectively confining the lithium polysulfides (LiPSs) into the pores, and provides favorable channels for ion diffusion. The rich nitrogen and carbon defects further offer more active sites for strongly adsorbing LiPSs and bridge electron transfer pathway at atomic scale for catalytic reactions to accelerate redox kinetics of Li/S conversion chemistry. Moreover, the features of lithiophilic wettability, high adsorption energy and densely distributed lithiophilic N of g-C3N4 provide a large number of adhesive sites for lithium cation (Li+) and disperse the nucleation sites to enable uniform nucleation and deposition of Li on the anode surface and to suppress formation and growth of Li dendrites. Finally, the g-C3N4 also effectively regulates the wettability between Li anode and solid inorganic electrolyte, and reduces the crystallinity of solid polymer electrolyte to enhance the Li+ migration ability and ionic conductivity.

Significantly enhanced electrocatalytic activity of copper for hydrogen evolution reaction through femtosecond laser blackening.

In this work, we report on the creation of a black copper via femtosecond laser processing and its application as a novel electrode material. We show that the black copper exhibits an excellent electrocatalytic activity for hydrogen evolution reaction (HER) in alkaline solution. The laser processing results in a unique microstructure: microparticles covered by finer nanoparticles on top. Electrochemical measurements demonstrate that the kinetics of the HER is significantly accelerated after bare copper is treated and turned black. At -0.325 V (v.s. RHE) in 1 M KOH aqueous solution, the calculated area-specific charge transfer resistance of the electrode decreases sharply from 159 Ω cm2 for the untreated copper to 1 Ω cm2 for the black copper. The electrochemical surface area of the black copper is measured to be only 2.4 times that of the untreated copper and therefore, the significantly enhanced electrocatalytic activity of the black copper for HER is mostly a result of its unique microstructure that favors the formation and enrichment of protons on the surface of copper. This work provides a new strategy for developing high-efficient electrodes for hydrogen generation.

In-Plane Lithium Growth Enabled by Artificial Nitrate-Rich Layer: Fast Deposition Kinetics and Desolvation/Adsorption Mechanism.

An artificial lithium-nitrate (LiNO3 )-rich layer (LN-RL) is developed to address dendritic lithium (Li) growth by a fusing-infusing strategy, in which LiNO3 is loaded into stainless steel mesh and a Li-metal anode (LN-RL@Li) is obtained by casting this LN-RL onto Li foil. The LN-RL enables fast Li deposition kinetics in carbonates and endows LN-RL@Li with excellent cycleability. The underneath mechanism on the contribution of LN-RL is uncovered by detailed characterizations combining with theoretical simulations. The LN-RL promotes the desolvation and capacitive adsorption of Li ions and induces in-plane Li growth along the edges of preplated Li with planar morphology. The improved cycleability of LN-RL(@Li) is demonstrated by LiǁCu cell that presents a coulombic efficiency of 97.2% after 280 cycles and LiǁLi cell that proceeds over 1000 h at 0.5 mA cm-2 in carbonates. Additionally, the LiǁLiFePO4 cell shows a capacity retention of 58% after 400 cycles at 1 C (1 C = 170 mA g-1 ), compared to the 35% after 180 cycles for the control. This work presents not only a promising strategy for practical applications of Li-metal batteries, but also a new understanding on the role of nitrate in Li plating/stripping kinetics.

The differential diagnostic value and clinical significance of serum HE4 in ovarian disease with elevated CA125.

OBJECTIVE: To determine the diagnostic value and clinical significance of serum HE4 levels in differentiating between benign and malignant ovarian disease in patients with elevated CA125 levels. METHODS: The levels and positive expression rate of HE4 were compared between 371 patients with elevated CA125 levels and benign ovarian disease, and 132 patients with epithelial ovarian cancer to determine the diagnostic value of HE4. RESULTS: The level and positive expression rate of HE4 differed significantly between the benign and malignant groups, in that, there was no significant difference in HE4 expression between CA125 low- and high-level groups within the benign ovarian disease group, with levels of HE4 being in the normal range in both groups. However, the positive expression rates and levels of HE4 in the malignant group were significantly different between the serum CA125 low- and high-level groups. ROC curve analysis showed that optimal HE4 cutoff values for increased accuracy in diagnosis were 78.03 pmol/L and 119.70 pmol/L before and after menopause, respectively. CONCLUSIONS: Serum HE4 levels can potentially be used as a marker to differentiate between benign and malignant ovarian disease with elevated serum CA125 levels. The high specificity of HE4 was superior in identifying benign ovarian disease. We recommend increasing the cutoff values of HE4 in premenopausal patients and decreasing the cutoff values in postmenopausal patients for increased accuracy in the differential diagnosis of patients with elevated CA125 levels.

Deciphering the Ethylene Carbonate-Propylene Carbonate Mystery in Li-Ion Batteries.

As one of the landmark technologies, Li-ion batteries (LIBs) have reshaped our life in the 21stcentury, but molecular-level understanding about the mechanism underneath this young chemistry is still insufficient. Despite their deceptively simple appearances with just three active components (cathode and anode separated by electrolyte), the actual processes in LIBs involve complexities at all length-scales, from Li+ migration within electrode lattices or across crystalline boundaries and interfaces to the Li+ accommodation and dislocation at potentials far away from the thermodynamic equilibria of electrolytes. Among all, the interphases situated between electrodes and electrolytes remain the most elusive component in LIBs. Interphases form because no electrolyte component (salt anion, solvent molecules) could remain thermodynamically stable at the extreme potentials where electrodes in modern LIBs operate, and their chemical ingredients come from the sacrificial decompositions of electrolyte components. The presence of an interphase on electrodes ensures reversibility of Li+ intercalation chemistry in anode and cathode at extreme potentials and defines the cycle life, power and energy densities, and even safety of the eventual LIBs device. Despite such importance and numerous investigations dedicated in the past two decades, we still cannot explain why, nor predict whether, certain electrolyte solvents can form a protective interphase to support the reversible Li+ intercalation chemistries while others destroy the electrode structure. The most representative example is the long-standing "EC-PC Disparity" and the two interphasial extremities induced therefrom: differing by only one methyl substituent, ethylene carbonate (EC) forms almost ideal interphases on the graphitic anode, thus becoming the indispensable solvent in all LIBs manufactured today, while propylene carbonate (PC) does not form any protective interphase, leading to catastrophic exfoliation of the graphitic structure. With one after another hypotheses proposed but none satisfactorily rationalizing this disparity on the molecular level, this mystery has been puzzling the battery and electrochemistry community for decades. In this Account, we attempted to decipher this mystery by reviewing the key factors that govern the interaction between the graphitic structure and the solvated Li+ right before interphase formation. Combining DFT calculation and experiments, we identified the partial desolvation of the solvated Li+ at graphite edge sites as a critical step, in which the competitive solvation of Li+ by anion and solvent molecules dictates whether an electrolyte is destined to form a protective interphase. Applying this model to the knowledge of relative Li+ solvation energy and frontier molecular orbital energy gap, it becomes theoretically possible now to predict whether a new solvent or anion would form a complex with Li+ leading to desirable interphases. Such molecular-level understanding of interphasial processes provides guiding principles to the effort of tailor-designing new electrolyte systems for more aggressive battery chemistries beyond Li-ion.

CircRNA8924 Promotes Cervical Cancer Cell Proliferation, Migration and Invasion by Competitively Binding to MiR-518d-5p /519-5p Family and Modulating the Expression of CBX8.

BACKGROUND/AIMS: Circular RNAs (circRNAs) play a significant role in the development and progression of various human cancers. However, the expression and function of circRNAs in cervical cancer (CC) have rarely been explored. The aim of this study was to investigate the biological function of circRNA8924 in CC and elucidate the possible molecular mechanism involved. METHODS: Quantitative polymerase chain reaction was used to determine mRNA expression of circRNA8924, miR-518d-5p/519-5p and CBX8 in CC tissues and cells. CBX8 protein expression was measured by Western blotting. The CCK-8 assay was used to evaluate cell proliferation, and the transwell assay to determine cell migration and invasion. The luciferase reporter assay was used to determine the direct regulation of miR-518d-5p/519-5p and circRNA8924 or CBX8 Results: The study demonstrated that the expression level of circRNA8924 in CC was significantly higher than that in the adjacent normal tissues (P < 0.001), and that it was also associated with tumor size, FIGO staging and myometrial invasion. The knockdown of circRNA8924 significantly inhibited the proliferation, migration and invasion of CC cells SiHa and HeLa. The expression level of miR-518d-5p/519-5p was negatively correlated with circRNA8924, and circRNA8924 regulated CBX8 by competitively binding to miR-518d-5p/519-5p. CONCLUSIONS: CircRNA8924 is highly expressed in CC tissue and can be considered a competitive endogenous RNA of the miR-518d-5p/519-5p family to promote the malignant biological behavior of CC cells. It is suggested that it may serve as a new biomarker for CC diagnosis and disease progression and provide potential targets for targeted therapy.

Influence of temperature on the capacitance of ionic liquid electrolytes on charged surfaces.

In this work using molecular dynamics simulations we examine the temperature dependence of the differential capacitance of room temperature ionic liquid electrolytes near electrified surfaces. For electrodes with atomically flat surfaces our simulations show very weak temperature dependence of the differential capacitance (DC) with a slight decrease of DC with increasing temperature. For atomically corrugated surfaces where the ion dimensions are comparable to the size of the surface corrugation patterns, the influence of temperature on DC is much more pronounced. At low temperatures the DC dependence on electrode potential shows large variations with well-defined maxima and minima. However, with increasing temperature these features are significantly flattened. Also for these corrugated surfaces an abnormal positive slope of DC vs. temperature is observed in the narrow range of relatively low voltages. Analysis of changes in the electric double layer structure as a function of temperature allowed us to propose a new mechanism explaining the observed trends in capacitance as a function of temperature and surface topography. The obtained simulation results are discussed in light of available experimental data and help to discriminate between contradictory experimentally observed trends in DC temperature dependence reported for ionic liquid based electrolytes in the literature.

Quantum chemistry study of the oxidation-induced stability and decomposition of propylene carbonate-containing complexes.

Oxidation-induced decomposition reactions of the representative complexes of propylene carbonate (PC)-based electrolytes were investigated using density functional theory (DFT) and a composite G4MP2 method. The cluster-continuum approach was used, where the oxidized PCn cluster was surrounded by the implicit solvent modeled via a polarized continuum model (PCM). The oxidative stability of the PCn (n = 2, 3, and 4) complexes was found to be around 5.4-5.5 V vs. Li(+)/Li, which is not only lower than the stability of an isolated PC but also lower than the stability of the PC-PF6(-), PC-BF4(-) or PC-ClO4(-) complexes surrounded by the implicit solvent. The oxidation-induced decomposition reactions were studied. The decomposition products of the oxidized PC2 contained CO2, acetone, propanal, propene, and carboxylic acid in agreement with the previous experimental studies.

Prophylatic use of IV nalmefene to prevent epidural opioid-induced pruritus: A multicenter, randomized clinical trial.

STUDY OBJECTIVE: The incidence of pruritus from neuraxial opioids is about 60%. Pruritus causes discomfort and decreases the quality of recovery. This randomized double-blinded clinical trial was aimed to evaluate the prophylactic effects of a single dose IV nalmefene on the incidence and severity of epidural opioid-induced pruritus within 24 h after surgeries. DESIGN: A two-center, randomized, double blinded, controlled clinical trial. SETTING: The study was conducted from March 2022 to February 2023 at two tertiary care hospitals in China. PATIENTS: Patients aged between 18 and 80 years-old who underwent elective surgeries and received epidural analgesia intra- and post-operatively were screened for study enrollment. A total of 306 patients were enrolled, 302 patients underwent randomization and 296 patients were included in the final analysis. INTERVENTIONS: The nalmefene group was prophylactically given 0.5 µg/kg nalmefene intravenously while the control group was given the same volume of saline. MEASUREMENTS: The primary endpoint was the incidence of pruritus within 24 h after surgeries. The secondary endpoints included time of the first patient-reported pruritus, severity of pruritus after surgeries, severity of acute pain scores after surgeries and other anesthesia/analgesia related side effects. MAIN RESULTS: Pruritus occurred in 51 of the 147 (34.69%) patients in the control group and 35 of the 149 (23.49%) patients in the nalmefene group (odds ratio, 0.58; 95% CI, 0.35 to 0.96; P = 0.034) within 24 h postoperatively. Nalmefene group demonstrated delayed onset of pruritus, reduced severity of pruritus and decreased vomiting within 24 h after surgery. There were no significant differences in postoperative analgesia and the incidence of other anesthesia/analgesia associated side effects. CONCLUSIONS: A single dose of 0.5 µg/kg nalmefene intravenously significantly reduced the incidence and severity of epidural-opioid induced pruritus within 24 h after surgery without affecting the efficacy of epidural analgesia. TRIAL REGISTRATION: Chinese Clinical Trial Registry (www.chictr.org.cn) and the registration number is ChiCTR2100050463. Registered on August 27th, 2021.

Biological Control of a Root-Knot Nematode Meloidogyne incognita Infection of Tomato (Solanum lycopersicum L.) by the Oomycete Biocontrol Agent Pythium oligandrum.

The biocontrol agent Pythium oligandrum, which is a member of the phylum Oomycota, can control diseases caused by a taxonomically wide range of plant pathogens, including fungi, bacteria, and oomycetes. However, whether P. oligandrum could control diseases caused by plant root-knot nematodes (RKNs) was unknown. We investigated a recently isolated P. oligandrum strain GAQ1, and the P. oligandrum strain CBS530.74, for the control of an RKN Meloidogyne incognita infection of tomato (Solanum lycopersicum L.). Initially, P. oligandrum culture filtrates were found to be lethal to M. incognita second-stage juveniles (J2s) with up to 84% mortality 24 h after treatment compared to 14% in the control group. Consistent with the lethality to M. incognita J2s, tomato roots treated with P. oligandrum culture filtrates reduced their attraction of nematodes, and the number of nematodes penetrating the roots was reduced by up to 78%. In a greenhouse pot trial, the P. oligandrum GAQ1 inoculation of tomato plants significantly reduced the gall number by 58% in plants infected with M. incognita. Notably, the P. oligandrum GAQ1 mycelial treatment significantly increased tomato plant height (by 36%), weight (by 27%), and root weight (by 48%). A transcriptome analysis of tomato seedling roots inoculated with the P. oligandrum GAQ1 strain identified ~2500 differentially expressed genes. The enriched GO terms and annotations in the up-regulated genes suggested a modulation of the plant hormone-signaling and defense-related pathways in response to P. oligandrum. In conclusion, our results support that P. oligandrum GAQ1 can serve as a potential biocontrol agent for M. incognita control in tomato. Multiple mechanisms appear to contribute to the biocontrol effect, including the direct inhibition of M. incognita, the potential priming of tomato plant defenses, and plant growth promotion.

B-/Si-containing electrolyte additive efficiently establish a stable interface for high-voltage LiCoO2 cathode and its synergistic effect on LiCoO2/graphite pouch cells.

An effective electrolyte additive, 3-(tert-Butyldimethylsilyoxy) phenylboronic acid (TBPB), is proposed to significantly improve the cycle stability of high voltage LiCoO2 (LCO) cathode. Experimental and computational results show that TBPB has a relatively higher oxidation activity than base electrolyte, and preferentially constructs a stable cathode electrolyte interphase (CEI) containing B-/Si- components on LCO surface. Theoretical calculation, XPS and NMR data show that TBPB-derived CEI layer contains B-F species and has the function of eliminating HF. The as-formed CEI effectively inhibits the detrimental side reactions from electrolyte decomposition and LCO surface structure reconstruction. The capacity retention of LCO/Li half-cell increases from 38.92% (base electrolyte) to 83.70% after 150 cycles at 1 C between 3.0 V and 4.5 V by adding 1% TBPB. Moreover, TBPB is also reduced prior to base electrolyte, forming an ionic conducting solid electrolyte interphase (SEI) on graphite surface. Benefiting from the synergistic effect between CEI layer on LCO cathode and SEI layer on graphite anode to effectively decrease the electrolyte decomposition, the capacity retention of commercial LCO/graphite pouch cell with 1% TBPB increases from 10.44% to 76.13% after 400 cycles at 1 C between 3.0 V and 4.5 V. This work demonstrates that TBPB can act as an effective film-forming additive for high energy density LCO cathode at high voltage, and provides novel insights for its commercial application from the aspect of synergistically interfacial stability.

Constructing a Highly Robust Interface Film for Enhancing Rate Performance of Graphite Anode via a Novel Electrolyte Additive.

Solid electrolyte interphase (SEI) is regarded as a key factor to enable high power outputs of Lithium-ion batteries (LIBs). Herein, we demonstrate a modified electrolyte consisting of a novel electrolyte additive, 1H,1H,2H,2H-perfluorooctyltrimethoxysilane (FTMS) to construct a highly robust and stable SEI on a graphite anode for LIBs to enhance its rate performance. With 2% FTMS, the anode presents an improved capacity retention from 77.6 to 91.2% at 0.5 C after 100 cycles and an improved capacity from 86 to 229 mAh g-1 at 2 C. Experimental characterizations and theoretical calculations reveal that FTMS is preferentially absorbed and reduced on graphite to construct an interface chemistry with uniform fluoride-containing organic lithium salt and silicon-containing polymer, which exhibits high flexibility and conductivity and endows the SEI with high robustness and stability. This work provides an effective way to address the issue of slow lithium insertion/desertion kinetics of graphite anodes.

Construction of Low-Impedance and High-Passivated Interphase for Nickel-Rich Cathode by Low-Cost Boron-Containing Electrolyte Additive.

The nickel-rich cathode LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) possesses the advantages of high reversible specific capacity and low cost, thus regarded as a promising cathode material for lithium-ion batteries (LIBs). However, the capacity of the NCM811 decays rapidly at high voltage due to the extremely unstable electrode/electrolyte interphase. The discharge capability at low temperature is also impaired because of the increasing interfacial impedance. Herein, a low-cost film-forming electrolyte additive with multi-function, phenylboronic acid (PBA), was employed to modify the interphasial properties of the NCM811 cathode. Theoretical calculation and experimental results showed that PBA constructed a highly conductive and steady cathode electrolyte interphase (CEI) film through preferential oxidation decomposition, which greatly improved the interfacial properties of the NCM811 cathode at room (25 °C) and low temperature (-10 °C). Specifically, the capacity retention of NCM811/Li cell was increased from 68 % to 87 % after 200 cycles with PBA additive. Moreover, the NCM811/Li cell with PBA additive delivered higher discharge capacity under -10 °C at 0.5 C (173.7 mAh g-1 vs. 111.1 mAh g-1 ). Based on the improvement of NCM811 interphasial properties by additive PBA, the capacity retention of NCM811/graphite full-cell was enhanced from 49 % to 65 % after 200 cycles.

Achieving a Highly Stable Electrode/Electrolyte Interface for a Nickel-Rich Cathode via an Additive-Containing Gel Polymer Electrolyte.

The nickel-rich cathode LiNi0.8Co0.1Mn0.1O2 (NCM811) is deemed as a prospective material for high-voltage lithium-ion batteries (LIBs) owing to its merits of high discharge capacity and low cobalt content. However, the unsatisfactory cyclic stability and thermostability that originate from the unstable electrode/electrolyte interface restrict its commercial application. Herein, a novel electrolyte composed of a polyethylene (PE) supported poly(vinylidene fluoride-co-hexafluoropropylene) (P(VdF-HFP)) based gel polymer electrolyte (GPE) strengthened by a film-forming additive of 3-(trimethylsilyl)phenylboronic acid (TMSPB) is proposed. The porous structure and good oxidative stability of the P(VdF-HFP)/PE membrane help to expand the oxidative potential of GPE to 5.5 V compared with 5.1 V for the liquid electrolyte. The developed GPE also has better thermal stability, contributing to improving the safety performance of LIBs. Furthermore, the TMSPB additive constructs a low-impedance and stable cathode electrolyte interphase (CEI) on the NCM811 cathode surface, compensating for GPE's drawbacks of sluggish kinetics. Consequently, the NCM811 cathode matched with 3% TMSPB-containing GPE exhibits remarkable cyclicity and rate capability, maintaining 94% of its initial capacity after 100 cycles at a high voltage range of 3.0-4.35 V and delivering a capacity of 133.5 mAh g-1 under 15 C high current rate compared with 68% and 75.8 mAh g-1 for the one with an additive-free liquid electrolyte. By virtue of the enhanced stability of the NCM811cathode, the cyclability of graphite||NCM811 full cell also increases from 48 to 81% after 100 cycles. The incorporation of P(VdF-HFP)-based GPE and TMSPB electrolyte additive points out a viable and convenient pathway to unlock the properties of high energy density and satisfactory safety for next-generation LIBs.