RESUMO
A metal-free route based on a carbon catalyst to synthesize biphenyls through oxidative dehydrogenation (ODH) of phenyl cyclohexene has been investigated. Among the samples examined, an air-oxidized active carbon exhibits the best activity with a 9.1 × 10-2 h-1 rate constant, yielding 74% biphenyl in 28 h at 140 °C under five bar O2 in anisole. The apparent activation energy is measured as 54.5 kJâ mol-1. The extended reaction scope, consisting of 15 differently substituted phenyl cyclohexenes, shows the wide applicability of the proposed method. The catalyst's good recyclability over six runs suggests this ODH method as a promising route to access the biaryl compounds. In addition, the reaction mechanism is investigated with a combination of X-ray photoelectron spectroscopy, functional group blocking, and model compounds of carbon catalysts and is proposed to be based on the redox cycle of the quinoidic groups on the carbon surface. Additional experiments prove that the addition of the catalytic amount of acid (methanesulfonic acid) accelerates the reaction. In addition, Hammett plot examination suggests the formation of a carbonium intermediate, and its possible structure is outlined.
RESUMO
The cathode of a lithium-oxygen battery (LOB) should be well designed to deliver high catalytic activity and long stability, and to provide sufficient space for accommodating the discharge product. Herein, a facile coprecipitation approach is employed to synthesize LaNi0.5Co0.5O3 (LNCO) perovskite oxide with a low annealing temperature. The assembled LOB exhibits superior electrochemical performance with a low charge overpotential of 0.03-0.05 V in the current density range of 0.1-0.5 mA cm-2. The battery ran stably for 119 cycles at a high coulombic efficiency. The superior performance is ascribed to (i) the high catalytic activity of LNCO towards oxygen reduction/evolution reactions; (ii) the increased temperature enabling fast kinetics; and (iii) the LiNO3-KNO3 molten salt enhancing the stability of the LOB operating at high temperature.
RESUMO
Wadsley-Roth phase titanium niobium oxides have received considerable interest as anodes for lithium ion batteries. However, the volume expansion and sluggish ion/electron transport kinetics retard its application in grid scale. Here, fast and durable lithium storage in entropy-stabilized Fe0.4 Ti1.6 Nb10 O28.8 (FTNO) is enabled by tuning entropy via Fe substitution. By increasing the entropy, a reduction of the calcination temperature to form a phase pure material is achieved, leading to a reduced grain size and, therefore, a shortening of Li+ pathway along the diffusion channels. Furthermore, in situ X-ray diffraction reveals that the increased entropy leads to the decreased expansion along a-axis, which stabilizes the lithium intercalation channel. Density functional theory modeling indicates the origin to be the more stable FeO bond as compared to TiO bond. As a result, the rate performance is significantly enhanced exhibiting a reversible capacity of 73.7 mAh g-1 at 50 C for FTNO as compared to 37.9 mAh g-1 for its TNO counterpart. Besides, durable cycling is achieved by FTNO, which delivers a discharge capacity of 130.0 mAh g-1 after 6000 cycles at 10 C. Finally, the potential impact for practical application of FTNO anodes has been demonstrated by successfully constructing fast charging and stable LiFePO4 âFTNO full cells.
RESUMO
It remains a major challenge to abate efficiently the harmful nitrogen oxides (NOx) in low-temperature diesel exhausts emitted during the cold-start period of engine operation. Passive NOx adsorbers (PNA), which could temporarily capture NOx at low temperatures (below 200 °C) and release the stored NOx at higher temperatures (normally 250-450 °C) to downstream selective catalytic reduction unit for complete abatement, hold promise to mitigate cold-start NOx emissions. In this review, recent advances in material design, mechanism understanding, and system integration are summarized for PNA based on palladium-exchanged zeolites. First, we discuss the choices of parent zeolite, Pd precursor, and synthetic method for the synthesis of Pd-zeolites with atomic Pd dispersions, and review the effect of hydrothermal aging on the properties and PNA performance of Pd-zeolites. Then, we show how different experimental and theoretical methodologies can be integrated to gain mechanistic insights into the nature of Pd active sites, the NOx storage/release chemistry, as well as the interactions between Pd and typical components/poisons in engine exhausts. This review also gathers several novel designs of PNA integration into modern exhaust after-treatment systems for practical application. At the end, we discuss the major challenges, as well as important implications, for the further development and real application of Pd-zeolite-based PNA in cold-start NOx mitigation.
Assuntos
Zeolitas , Zeolitas/química , Adsorção , Óxidos de Nitrogênio/análise , Óxidos de Nitrogênio/química , Emissões de Veículos , CatáliseRESUMO
CO2 emission is deemed to be mainly responsible for global warming. To reduce CO2 emissions into the atmosphere and to use it as a carbon source, CO2 capture and its conversion into valuable chemicals is greatly desirable. To reduce the transportation cost, the integration of the capture and utilization processes is a feasible option. Here, the recent progress in the integration of CO2 capture and conversion is reviewed. The absorption, adsorption, and electrochemical separation capture processes integrated with several utilization processes, such as CO2 hydrogenation, reverse water-gas shift reaction, or dry methane reforming, is discussed in detail. The integration of capture and conversion over dual functional materials is also discussed. This review is aimed to encourage more efforts devoted to the integration of CO2 capture and utilization, and thus contribute to carbon neutrality around the world.
Assuntos
Dióxido de Carbono , Aquecimento Global , Metano , Carbono , HidrogenaçãoRESUMO
Haggite-structured V4O6(OH)4 is prepared via a one-step reduction of V2O5 in a mixture of guaiacol and methanol. Guaiacol delays the overreduction of Haggite to V2O3. The time window for the stable existence of the Haggite phase is enlarged at low temperature.
RESUMO
A facet-dependent photo-deactivation mechanism of Cu2O was verified and reported, which is caused by the facet-dependent charge carrier transport. During irradiation, the {100} and {110} crystal facets are selectively corroded by the photo-generated holes, while the {111} facets are comparatively stable.
RESUMO
Many catalytic reactions involving small molecules, which are key transformations in sustainable energy and chemistry, involve the making or breaking of a bond between carbon, nitrogen and oxygen. It has been observed that such heterogeneously (electro)catalyzed reactions often exhibit remarkable and unusual structure sensitivity, in the sense that they take place preferentially on catalyst surfaces with a long-ranged two-dimensional (100) atomic structure. Steps and defects in this two-dimensional structure lower the catalytic activity. Such structure sensitivity must be due to the existence of a special active site on these two-dimensional (100) terraces. Employing detailed density functional theory calculations, we report here the identification of this special active site for a variety of catalytic reactions. The calculations also illustrate how this specific site breaks the well-known rule that under-coordinated surface atoms bind adsorbates stronger, thereby providing the atomic-level explanation for the lack of reactivity of steps and defects for the reactions under consideration. The breakdown of such rule results in significant deviations from commonly observed energetic scaling relations between chemisorbates. Thus, this work provides new design rules for the development of thermodynamically efficient catalysts for an important class of bond-making and bond-breaking reactions.
RESUMO
We report the complete ethanolysis of Kraft lignin over an α-MoC1-x /AC catalyst in pure ethanol at 280 °C to give high-value chemicals of low molecular weight with a maximum overall yield of the 25 most abundant liquid products (LP25) of 1.64â g per gram of lignin. The LP25 products consisted of C6 -C10 esters, alcohols, arenes, phenols, and benzyl alcohols with an overall heating value of 36.5â MJ kg(-1) . C6 alcohols and C8 esters predominated and accounted for 82â wt % of the LP25 products. No oligomers or char were formed in the process. With our catalyst, ethanol is the only effective solvent for the reaction. Supercritical ethanol on its own degrades Kraft lignin into a mixture of small molecules and molecular fragments of intermediate size with molecular weights in the range 700-1400, differing in steps of 58 units, which is the weight of the branched-chain linkage C3 H6 O in lignin. Hydrogen was found to have a negative effect on the formation of the low-molecular-weight products.
Assuntos
Etanol/química , Lignina/química , Molibdênio/química , Nanoestruturas/química , CatáliseRESUMO
A surface structural preference for (1 0 0) terraces of fcc metals is displayed by many bond-breaking or bond-making reactions in electrocatalysis. Here, this phenomenon is explored in the electrochemical oxidation of dimethyl ether (DME) on platinum. The elementary C-O bond-breaking step is identified and clarified by combining information obtained from single-crystal experiments and density functional theory (DFT) calculations. Experiments on Pt(1 0 0), Pt(5 1 0), and Pt(10 1 0) surfaces show that the surface structure sensitivity is due to the bond-breaking step, which is unfavorable on step sites. DFT calculations suggest that the precursor for the bond-breaking step is a CHOC adsorbate that preferentially adsorbs on a square ensemble of four neighboring atoms on Pt(1 0 0) terraces, named as "the active site". Step sites fail to strongly adsorb CHOC and are, therefore, ineffective in breaking C-O bonds, resulting in a decrease in activity on surfaces with increasing step density. Our combined experimental and computational results allow the formulation of a new mechanism for the electro-oxidation of DME as well as a simple general formula for the activity of different surfaces toward electrocatalytic reactions that prefer (1 0 0) terrace active sites.
RESUMO
Amorphous BiOx, prepared on the surface of NASICON electrolyte by the photochemical metal-organic deposition method, can substantially improve the interfacial properties at the anode side. The Na symmetric cell delivers a critical current density of 1.2 mA cm-2 and cycles stably at 0.5 mA cm-2 for 1000 h at 30 °C.
RESUMO
Municipal wastewater contains emergent chemical and biological pollutants that are resistant to conventional wastewater treatments. Therefore, the focus of the current study was to address the challenge of removing emergent chemical and biological pollutants present in municipal wastewater. To achieve this, a photo electro-catalytic (PEC) treatment approach was employed, focusing on the removal of both micro and biological pollutants that are of emergent concern, as well as the reduction of Chemical Oxidation Demand (COD) and Total Organic Carbon (TOC). The treatment involved the use of a modified multi-layer catalytic anode photo-electroactive anode as an effective anode for PEC treatment of municipal wastewater. In the continuous mode of operation, %COD removal was optimized for the treatment of municipal wastewater under Ultra-Violet C (UVc), 280 nm, and Visible (Vis) radiation, 400 nm. Therefore, a comparative study was performed to investigate the effect of Vis radiation on %COD removal, micropollutants removal, and disinfection of municipal wastewater. Micropollutants present in municipal wastewater were effectively oxidized/degraded with the highest reduction rate between 100% and 80% under the influence of UVc and Vis radiation respectively by the PEC treatment process. Disinfection of various microorganisms present in the wastewater with the effect of UVc and Vis assisted PEC treatment was also monitored. Overall, 75-80% of the disinfection of municipal wastewater was contributed by the modified multi-layer catalytic anode. The UVc in the PEC system, contributes approximately 20-25% to the overall disinfection of municipal wastewater.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Águas Residuárias , Poluentes Químicos da Água/química , Oxirredução , EletrodosRESUMO
Nonaqueous redox flow batteries (NARFBs) have promise for large-scale energy storage with high energy density. Developing advanced active materials is of paramount importance to achieve high stability and energy density. Herein, we adopt the molecular engineering strategy by coupling tetraalkylammonium and an ethylene glycol ether side chain to design anthraquinone-based ionic active species. By adjusting the length of the ethylene glycol ether chain, an ionic active species 2-((9,10-dioxo-9,10-dihydroanthracen-1-yl)amino)-N-(2-(2-methoxyethoxy)ethyl)-(N,N-dimethylethan-1-aminium)-bis(trifluoromethylsulfonyl)imide (AQEG2TFSI) with high solubility and stability is obtained. Paired with a FcNTFSI cathode, the full battery provides an impressive cycling performance with discharge capacity retentions of 99.96% and 99.74% per cycle over 100 cycles with 0.1 and 0.4 M AQEG2TFSI, respectively.
RESUMO
A thin yttria stabilized zirconia (YSZ)/gadolinia doped ceria (GDC) bi-layer membrane is fabricated through the slurry spin coating technique and used as an electrolyte of a solid oxide fuel cell with La0.6Sr0.4Co0.2Fe0.8O3-δ as the cathode. The viscosity of the YSZ slurry is controlled by adding ethanol in the terpineol solvent, which shows a negligible effect on the thickness but a remarkable influence on the porosity of the YSZ film. The thickness of the YSZ layer increases with the YSZ content in the slurry. The YSZ films are pre-sintered at various temperatures, and the one sintered at 1200 °C has a moderate interaction with the GDC slurry, forming a 10 µm-thick YSZ/GDC bilayer with a low porosity and a low ohmic resistance. The corresponding single cell shows a maximum power density of 1480 mW cm-2 at 750 °C.
RESUMO
Nonaqueous redox flow batteries (NARFBs) are a potential candidate for high-energy-density storage systems because of their wider electrochemical windows than that of the aqueous systems. However, their further development is hindered by the low solubility of organic redox-active materials and poor high-current operations. Herein, we report a liquid anolyte material, 3-nitrotoluene (3-NT), which demonstrates high chemical stability and mass- and charge-transfer kinetics. The NARFB based on 2,5-di-tert-butyl-1-methoxy-4-[2'-methoxyethoxy]benzene/3-NT exhibits an energy efficiency of 71.8% even at a relatively high current density of 60 mA cm-2. Benefiting from the high miscibility of the redox species, an ultra-high volumetric energy density of 37.8 W h L-1 can be achieved at 1.0 M. This work provides a viable method to build an NARFB with both high operational current density and energy density for next-generation, low-cost, and high-energy storage systems.
RESUMO
The efficient depolymerization and hydrodeoxygenation of enzymatic hydrolysis lignin are achieved in cyclohexane solvents over a gamma-alumina supported nickel molybdenum alloy catalyst in a single step. Under initial 3 MPa hydrogen at 320 °C, the highest overall cycloalkane yield of 104.4 mg/g enzymatic hydrolysis lignin with 44.4 wt% selectivity of ethyl-cyclohexane was obtained. The reaction atmosphere and temperature have significant effects on enzymatic hydrolysis lignin conversion, product type and distribution. The conversion of enzymatic hydrolysis lignin was also investigated over different nickel and molybdenum-based catalysts, and the gamma-alumina supported nickel molybdenum alloy catalyst exhibited the highest activity among those catalysts. To reveal the reaction pathways of alkylphenol hydrodeoxygenation, 4-ethylphenol was tested as a model compound. Complete conversion of 4-ethylphenol into cycloalkanes was achieved. A two-step mechanism of 4-ethylphenol dihydroxylation - hydrogenation is proposed, in which the benzene ring saturation is deemed as the rate-determining step.
Assuntos
Cicloparafinas , Lignina , Ligas , Óxido de Alumínio , Catálise , Hidrólise , Molibdênio , NíquelRESUMO
A series of nitrile-functionalized pyrrolidinium-based ionic liquids have been prepared and characterized by spectroscopic methods and X-ray crystallography. The application of these new ionic liquids as reaction media for Suzuki and Stille C-C cross-coupling reactions has been investigated and compared with related imidazolium and pyridinium systems (including those with and without nitrile functionalities). The nature of the ionic liquid strongly influences the catalyzed reaction and it would appear that, in addition to the nitrile group, the strength of anion-cation pairing in the ionic liquid and the viscosity of the ionic liquid play critical roles. Nanoparticles are also detected following catalysis and their role, and the influence of the ionic liquid on them, is assessed. The ability to use the nitrile-functionalized pyrrolidinium-based ionic liquids diluted in other (non-functionalized) ionic liquids is also described.
RESUMO
A simple and green approach was proceeded to obtain a stable single-walled carbon nanotubes (SWNTs)/L-phenylalanine (Phe) solution. The oxidized SWNTs (OSWNT) were used in this work. The scanning electron microscopy (SEM), High-resolution transmission electron microscopy (HRTEM), Raman spectrometer, Fourier transform-infrared resonance (FT-IR), Ultraviolet-visible (UV-vis) spectroscopy, Thermogravimetric analysis (TGA) and High performance liquid chromatography (HPLC) were joined together to investigate the interaction between OSWNT and Phe. The OSWNT became soluble in the water and formed a stable solution since the Phe was adsorbed. The absorbed amount of Phe on the OSWNT is around 33 wt%. Adsorption of the Phe was mainly carried out on the OSWNT with smaller diameters. The Phe molecules were absorbed on the OSWNT by conjunct interaction of the pi-pi stacking, hydrogen bond and part of covalent bond.
Assuntos
Nanotubos de Carbono , Fenilalanina/química , Adsorção , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Oxirredução , Espectroscopia de Infravermelho com Transformada de Fourier , Análise Espectral RamanRESUMO
An all organic redox flow battery with 4,4'-dimethylbenzophenone (44DMBP) anolyte and 2,5-di-tert-butyl-1,4-dimethoxybenzene (DBB) catholyte shows a high open circuit voltage of 2.97 V, and average coulombic efficiency of 72% over 95 cycles at a current density of 1 mA cm-2.
RESUMO
A highly active anode material for solid oxide fuel cells resistant to carbon deposition is developed. Co-Fe co-doped La0.5Ba0.5MnO3-δ with a cubic-hexagonal heterogeneous stucture is synthesized through the Pechini method. An A-site ordered double perovskite with Co0.94Fe0.06 alloy-oxide core-shell nanoparticles on its surface is formed after reduction. The phase transition and the exsolution of the nanoparticles are investigated with X-ray diffraction, thermogravimetric analysis, and high-resolution transmission electron microscope. The exsolved nanoparticles with the layered double-perovskite supporter show a high catalytic activity. A single cell with that anode and a 300 µm thick La0.8Sr0.2Ga0.8Mg0.2O3-δ electrolyte layer exhibits maximum power densities of 1479 and 503 mW cm-2 at 850 °C with wet hydrogen and wet methane fuels, respectively. Moreover, the single cell fed with wet methane exhibits a stable power output at 850 °C for 200 h, demonstrating a high resistance to carbon deposition of the anode due to the strong anchor of the exsolved nanoparticles on the perovskite parent. The oxide shell also preserves the metal particles from coking.