Structural Engineering of Co-Metal-Organic Frameworks via Ce Incorporation for Improved Oxygen Evolution.

The rational design of metal-organic framework (MOF)-based electrocatalysts plays a key role in achieving high-efficiency oxygen evolution reaction (OER). Herein, a synergetic morphology and electronic structure engineering strategy are proposed to design a Co-MOF nanoflower grown on carbon paper via rare-earth cerium doping (CoCe-MOF/CP). Compared with Co-MOF/CP, the developed CoCe-MOF/CP exhibited superior OER performance with a low overpotential of 267 mV at 10 mA cm-2 and outstanding long-term stability over 100 h. Theoretical calculations show that the unique 4f valence electron structure of Ce induced charge redistribution of the Co-MOF surface through the strong Co 3d-O 2p-Ce 4f orbital electronic coupling below the Fermi level. Ce-doped plays a key role in the engineering of the electronic states of the Co sites to endow them with the optimal free energy landscape for enhanced OER catalytic activity. This work provides new insights into comprehending the RE-enhanced mechanism of electrocatalysis and provides an effective strategy for the design of MOF-based electrocatalysts.

Photocatalytic Hydrosilylation over Pt@UiO-66-NH2: Enhanced Activity and Polymerization Kinetics.

Metal-organic frameworks (MOFs) have shown great research and application value in various types of hydrosilylation reactions. However, studies on photocatalysis-induced hydrosilylation using MOFs are extremely rare. Metal nanoparticles (MNPs)@MOFs are extensively studied for their excellent structural tunability and photocatalytic activity, but there are few reports on their application in photocatalytic hydrosilylation. Here, a novel photocatalyst consisting of platinum (Pt) nanoparticles immobilized in a MOF framework is synthesized and used for photocatalytic hydrosilylation. The effects of various factors on hydrosilylation conversion are investigated, including catalyst concentration, substrate ratio, and irradiation intensity. Furthermore, the photoreactivity of the synthesized Pt catalyst is evaluated in the presence of different concentrations of 2-chlorothixanthone as a photosensitizer. It is noteworthy that the conversion of the reaction increases with increasing catalyst concentration or photosensitizer concentration, whereas increasing the polymethylhydrosiloxane content does not lead to a significant increase in conversion. This study demonstrates the potential of MNPs@MOFs as efficient photocatalysts for photoinduced hydrosilylation reactions and paves the way for future applications in this area.

Urolithin A improves Alzheimer's disease cognition and restores mitophagy and lysosomal functions.

BACKGROUND: Compromised autophagy, including impaired mitophagy and lysosomal function, plays pivotal roles in Alzheimer's disease (AD). Urolithin A (UA) is a gut microbial metabolite of ellagic acid that stimulates mitophagy. The effects of UA's long-term treatment of AD and mechanisms of action are unknown. METHODS: We addressed these questions in three mouse models of AD with behavioral, electrophysiological, biochemical, and bioinformatic approaches. RESULTS: Long-term UA treatment significantly improved learning, memory, and olfactory function in different AD transgenic mice. UA also reduced amyloid beta (Aß) and tau pathologies and enhanced long-term potentiation. UA induced mitophagy via increasing lysosomal functions. UA improved cellular lysosomal function and normalized lysosomal cathepsins, primarily cathepsin Z, to restore lysosomal function in AD, indicating the critical role of cathepsins in UA-induced therapeutic effects on AD. CONCLUSIONS: Our study highlights the importance of lysosomal dysfunction in AD etiology and points to the high translational potential of UA. HIGHLIGHTS: Long-term urolithin A (UA) treatment improved learning, memory, and olfactory function in Alzheimer's disease (AD) mice. UA restored lysosomal functions in part by regulating cathepsin Z (Ctsz) protein. UA modulates immune responses and AD-specific pathophysiological pathways.

Juvenile hormone suppresses the FoxO-takeout axis to shorten longevity in male silkworm.

Juvenile hormone (JH) plays a crucial endocrine regulatory role in insect metamorphosis, reproduction, and longevity in multiple organisms, such as flies, honeybees, and migratory monarch butterflies. However, the molecular mechanism of JH affecting longevity remains largely unknown. In this study, we showed that JH III and its analog methoprene shortened the survival days significantly in the adulthood of male silkworm. At the same time, the allatostatin, a neuropeptide that inhibits the secretion of JH by the corpora allata, could extend the survival days dramatically after adult eclosion in male silkmoth. Interestingly, a central pro-longevity FoxO transcription factor was reduced upon JH stimulation in silkworm individuals and BmN-SWU1 cells. Furthermore, the analysis of the upstream sequence of the FoxO gene identified a JH response element which suggested that FoxO might be regulated as a target of JH. Surprisingly, we identified a Bmtakeout (BmTO) gene that encodes a JH-binding protein and contains a FoxO response element. As expected, FoxO overexpression and knockdown up- and down-regulated the expression of BmTO respectively, indicating that BmTO functions as a FoxO target. BmTO overexpression could release the inhibitory effect of JH on the BmFoxO gene by reducing JH bioavailability to block its signal transduction. Collectively, these results may provide insights into the mechanism of the JH-FoxO-TO axis in aging research and pest control.

Lycium barbarum polysaccharide improves dopamine metabolism and symptoms in an MPTP-induced model of Parkinson's disease.

BACKGROUND: Parkinson's disease (PD) is the second most common neurodegenerative disease in middle-aged and elderly populations, whereas there is no cure for PD so far. Novel animal models and medications await development to elucidate the aetiology of PD and attenuate the symptoms, respectively. METHODS: A neurotoxin, 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP), was used in the current study to establish a PD pathologic model in silkworms. The time required to complete specific behaviours was recorded. Dopamine content was detected by ultra-performance liquid chromatography (UPLC). The activity of insect tyrosine hydroxylase (TH) was determined using a double-antibody sandwich method. Oxidative stress was assessed by changes in antioxidant enzyme activity and the content of oxidative products. RESULTS: MPTP-treated silkworms were characterized by impaired motor ability, reduced dopamine content, and elevated oxidative stress level. The expression of TH, a dopamine biosynthetic enzyme within dopaminergic neurons in the brain, was significantly reduced, indicating that dopaminergic neurons were damaged. Moreover, MPTP-induced motility impairment and reduced dopamine level in the silkworm PD model could be rescued after feeding a combination of levodopa (L-dopa [LD]) and carbidopa (CD). MPTP-induced oxidative damage was also alleviated, in ways consistent with other PD animal models. Interestingly, administration of Lycium barbarum polysaccharide (LBP) improved the motor ability, dopamine level, and TH activity, and the oxidative damage was concomitantly reduced in the silkworm PD model. CONCLUSIONS: This study provides a promising animal model for elucidating the pathogenesis of PD, as well as a relevant preliminary drug screening (e.g., LBP) and evaluation.

High-Mobility Group Box 1 Inhibitor BoxA Alleviates Neuroinflammation-Induced Retinal Ganglion Cell Damage in Traumatic Optic Neuropathy.

Traumatic optic neuropathy (TON) is a significant cause of vision loss and irreversible blindness worldwide. It is defined as retinal ganglion cell death and axon degeneration caused by injury. Optic nerve crush (ONC), a well-validated model of TON, activates retinal microglia and initiates neuroinflammation. High-mobility group box 1 (HMGB1), a non-histone chromosomal binding protein in the nucleus of eukaryotic cells, is an important inducer of microglial activation and pro-inflammatory cytokine release. The purpose of this study was to examine the protective effects and mechanism of the HMGB1 inhibitor BoxA to neuroinflammation-induced retinal ganglion cells (RGCs) damage in traumatic optic neuropathy. For that purpose, an optic nerve crush model was established in C57BL/6J mice at 10-12 weeks. Model mice received an intravitreal injection of PBS and the HMGB1 inhibitor BoxA. Our data demonstrated that HMGB1 expression increased after optic nerve crush. Retinal ganglion cell function and morphology were damaged, and retinal ganglion cell numbers were reduced after optic nerve crush. Intravitreal injection of BoxA after ONC can alleviate damage. Furthermore, BoxA reduced microglial activation and expression levels of nuclear factor κB (NF-kB), nucleotide-binding domain, leucine-rich repeat containing protein 3 (NLRP3), and apoptosis-associated speck-like protein containing a CARD (ASC) in experimental ONC mice. In summary, HMGB1 mediates NLRP3 inflammasome via NF-kB to participate in retinal inflammatory injury after ONC. Thus, intravitreal injection of BoxA has potential therapeutic benefits for the effective treatment of RGC death to prevent TON.

Chemiluminescence-Induced Free Radical-Promoted Cationic Polymerization.

Chemiluminescence (CL) has recently been featured as a new external light source for various photoinduced reactions with attractive features such as eliminating continuous energy supply and advanced light source setups. In the present study, the free-radical-promoted cationic polymerization of cyclohexene oxide, n-butyl vinyl ether, and N-vinyl carbazole under CL irradiation is described. The method is based on the visible-light-induced generation of electron donor radicals from bis-(4-methoxybenzoyl)diethyl germane (BAG), bis(2,4,6-trimethylbenzoyl) phenyl phosphinate, and camphorquinone by CL illumination followed by electron transfer to diphenyl iodonium hexafluorophosphate (Ph2 I+ PF6 - ) to form corresponding cations capable of initiating cationic polymerization. The applicability of the process to network formation is also demonstrated by using a bifunctional monomer, tri(ethylene glycol) divinyl ether.

Near-Infrared-Induced Cationic Polymerization Initiated by Using Upconverting Nanoparticles and Titanocene.

A new near-infrared (NIR)-sensitized photoinitiating system for free-radical-promoted cationic polymerization of oxirane and vinyl monomers such as cyclohexene oxide, and n-butyl vinyl ether (BVE), and N-vinyl carbazole (NVC) is described. A three-component photoinitiating system consists of upconverting nanoparticles (UCNPs), titanium-complex free radical photoinitiator (Irgacure 784, titanocene), and diphenyl iodonium hexafluorophosphate (Ph2 I+ PF6 - ). Upon NIR laser irradiation at 980 nm, the radicals generated from titanocene by the visible light emitted by UCNP abstract hydrogen or add to the monomer, forming electron donor radicals that can be oxidized by iodonium salt to initiate cationic polymerization.

Prevalence and phylogenetic analysis of porcine diarrhea associated viruses in southern China from 2012 to 2018.

BACKGROUND: In China, large-scale outbreaks of severe diarrhea caused by viruses have occurred in pigs since late 2010. To investigate the prevalence and genetic evolution of diarrhea-associated viruses responsible for the outbreaks, a total of 2987 field diarrheal samples collected from 168 pig farms in five provinces in Southern China during 2012-2018 were tested. RESULTS: Porcine epidemic diarrhea virus (PEDV) was most frequently detected virus with prevalence rates between 50.21 and 62.10% in samples, and 96.43% (162/168) in premises, respectively. Porcine deltacoronavirus (PDCoV) was the second prevalent virus with prevalence rates ranging from 19.62 to 29.19% in samples, and 70.24% (118/168) in premises, respectively. Both transmissible gastroenteritis virus (TGEV) and porcine rotavirus (PoRV) were detected at low prevalence rates of < 3% in samples and 10.12% in premises. In this study, we identified a newly emerged swine acute diarrhea syndrome coronavirus (SADS-CoV) in diarrheal samples of piglets from Fujian province in Southern China, and the prevalence rate of SADS-CoV was 10.29% (7/68). Co-infections of these diarrhea-associated viruses were common. The most frequent co-infection was PEDV with PDCoV, with an average detection rate of 12.72% (380/2987, ranging from 8.26-17.33%). Phylogenetic analysis revealed that PEDVs circulating in Southern China during the last 7 years were clustered with the variant strains of PEDV in genotype IIa. The most frequent mutations were present in the collagenase equivalent (COE) and epitope regions of the spike gene of the PEDVs currently circulating in the field. Genetic relationships of PDCoVs were closely related with Chinese strains, other than those present in the USA, South Korea, Thailand and Lao's public. CONCLUSIONS: The findings of this study indicated that variant PEDV, PDCoV, and SADS-CoV were leading etiologic agents of porcine diarrhea, and either mono-infections or co-infections of pathogenic enteric CoVs were common in pigs in Southern China during 2012-2018. Thus, significant attention should be paid in order to effectively prevent and control porcine viral diarrhea.

Design and Performance of a Composite Grating-Coupled Surface Plasmon Resonance Trace Liquid Concentration Sensor.

In this paper, a grating-coupled surface plasmon resonance concentration sensor employing a gold and indium tin oxide (Au/ITO) nanoparticle composite instead of metal is proposed. The structure and material parameters of the sensor are discussed and analyzed. Taking the ethylene glycol concentration as an example, the influence of the nanocomposite on the wave vector matching, the influence of the refractive index of the medium to be tested and the influence of the concentration on the refractive index were analyzed in detail. The experimental results show that when the sensor is used for the measurement of ethylene glycol concentration, the correlation coefficient between the concentration and the refractive index is as high as 0.999995. The fitting curve and data correlation are good, and the sensitivity has a good linear relationship with the sensitivity. Therefore, the sensor structure proposed in this paper can be used to accurately measure the trace concentration of liquid, and its sensing mode has certain reference value for the measurement of general trace fluid concentration.

Effects of Pore Size on the Osteoconductivity and Mechanical Properties of Calcium Phosphate Cement in a Rabbit Model.

Calcium phosphate cement (CPC) porous scaffold is widely used as a suitable bone substitute to repair bone defect, but the optimal pore size is unclear yet. The current study aimed to evaluate the effect of different pore sizes on the processing of bone formation in repairing segmental bone defect of rabbits using CPC porous scaffolds. Three kinds of CPC porous scaffolds with 5 mm diameters and 12 mm length were prepared with the same porosity but different pore sizes (Group A: 200-300 µm, Group B: 300-450 µm, Group C: 450-600 µm, respectively). Twelve millimeter segmental bone defects were created in the middle of the radius bone and filled with different kinds of CPC cylindrical scaffolds. After 4, 12, and 24 weeks, alkaline phosphatase (ALP), histological assessment, and mechanical properties evaluation were performed in all three groups. After 4 weeks, ALP activity increased in all groups but was highest in Group A with smallest pore size. The new bone formation within the scaffolds was not obvious in all groups. After 12 weeks, the new bone formation within the scaffolds was obvious in each group and highest in Group A. At 24 weeks, no significant difference in new bone formation was observed among different groups. Besides the osteoconductive effect, Group A with smallest pore size also had the best mechanical properties in vivo at 12 weeks. We demonstrate that pore size has a significant effect on the osteoconductivity and mechanical properties of calcium phosphate cement porous scaffold in vivo. Small pore size favors the bone formation in the early stage and may be more suitable for repairing segmental bone defect in vivo.

Direct Visualization of Excited-State Symmetry Breaking Using Ultrafast Time-Resolved Infrared Spectroscopy.

Most symmetric quadrupolar molecules designed for two-photon absorption behave as dipolar molecules in the S1 electronic excited state. This is usually explained by a breakup of the symmetry in the excited state. However, the origin of this process and its dynamics are still not fully understood. Here, excited-state symmetry breaking in a quadrupolar molecule with a D-π-A-π-D motif, where D and A are electron donating and accepting units, is observed in real time using ultrafast transient infrared absorption spectroscopy. The nature of the relaxed S1 state was found to strongly depend on the solvent polarity: (1) in nonpolar solvents, it is symmetric and quadrupolar; (2) in weakly polar media, the quadrupolar state observed directly after excitation transforms to a symmetry broken S1 state with one arm bearing more excitation than the other; and (3) in highly polar solvents, the excited state evolves further to a purely dipolar S1 state with the excitation localized entirely on one arm. The time scales associated with the transitions between these states coincide with those of solvation dynamics, indicating that symmetry breaking is governed by solvent fluctuations.

Rhodiola rosea extends lifespan and improves stress tolerance in silkworm, Bombyx mori.

The root of Rhodiola rosea is widely used in Traditional Chinese Medicine. The extract from R. rosea is reported to extend the lifespan of yeast, nematode, and fruit fly. However, the molecular mechanism is not fully understood. Here, we tested whether R. rosea extends the lifespan of the silkworm. An aqueous extract of R. rosea significantly prolonged the lifespan of the silkworm, without affecting its daily food intake, body weight, or fecundity, suggesting that R. rosea did not exhibit obvious side effects. Rhodiola rosea extract also enhanced the stress resistance in the silkworm, against heat stress (37 °C) and starvation. The R. rosea extract increased the activity of the major antioxidant enzymes, glutathione S-transferase and catalase, and altered the content of glutathione and malondialdehyde. Rhodiola rosea increased the expression of BmFoxO, which is a downstream regulator of insulin/IGF-1 signaling (IIS) pathway in the silkworm. Our results showed that R. rosea extends lifespan, in which IIS pathway might be involved, and enhances stress resistance in the silkworm. Thus, the silkworm might be used as a novel animal model for lifespan study and efficacy evaluation of Traditional Chinese Medicines.

[Progress and perspective of silkworm as a model of human diseases for drug screening].

As a typical representative of Lepidopteran insects, the silkworm, Bombyx mori, has numerous advantages, such as simple husbandry,highly prolific nature, short generation time, easily handled to be operated with moderate body size, clear genetic background and abundant mutation resources. Silkworm has not only been studied by the geneticists, but also been used as a new laboratory animal model of human disease and drug screening. There is a plenty of genetic resources in silkworm, some of which could be used as models of human genetic diseases, such as Phenylketonuria, Parkinson's disease, Hermansky-Pudlak syndrome and so on. Silkworm has also played a significant role in the study of pathogenesis of human pathogenic microorganisms. Moreover, silkworm could be used to evaluate the pharmacokinetic/pharmacodynamics properties and safety of a new drug comprehensively and systematically. At the same time, it can be used in the high throughput drug screening assays to shorten the period of the new drug research and development. This review summarizes that the silkworm is an excellent model in the drug screening assays, and has a potential in application to the large-scale drug screening.

[Brand-New Ge20Ga5Sb10S65 Prism Biosensor Based on Inverted SPR].

Based on inverted surface plasmon resonance (ISPR) a novel biosensor consisting of Ge20Ga5Sb10S65-palladium-graphene layer-biomolecule layer is proposed. The refractive index of biomolecule layer alters as biomolecule experience interactions, thus leading to a shift of ISPR angle. On this basis, the spectrum output of sensor is derived by transfer matrix method. The sensitivity, the resolution, the dynamic detection range and the signal to noise ratio of the presented sensor are discussed and compared with the performance of traditional sensors. Moreover, the influences of grapheme layer thickness on sensors are analyzed with comparative study. Finally, near infrared is used as the incident light of the presented sensor. The results show that, the best thickness of grapheme layer is monolayer; the peak intensity of the ISPR reflection is about 80%~90% of intensity of incident light, guaranteeing a high signal to noise ratio; In the visible light, when λ = 632.8 nm, the presented sensor is 1.9 times the resolution of the sensor based on SiO2 coupling inverted surface plasmon resonance, is 3. 5 times the resolution of the sensor based on surface plasmon resonance(SPR), and is 2 times the dynamic detection range of pre-existing biosensor based on SPR. The application of Ge20Ga5Sb10S65 prism extends the detection light wavelength from the visible region to the near infrared region. When λ = 1,000 nm, the sensor is 3-4 times of the sensor in visible region. The research greatly contributes to the realization and application of biosensor based on inverted surface plasmon resonance.

Genome-wide identification and characterization of Fox genes in the silkworm, Bombyx mori.

The forkhead box (Fox) transcription factor family has a characteristic of forkhead domain, a winged DNA-binding domain. The Fox genes have been classified into 23 subfamilies, designated FoxA to FoxS, of which the FoxR and FoxS subfamilies are specific to vertebrates. In this review, using whole-genome scanning, we identified 17 distinct Fox genes distributed on 13 chromosomes of the silkworm, Bombyx mori. A phylogenetic tree showed that the silkworm Fox genes could be classified into 13 subfamilies. The FoxK subfamily is specifically absent from the silkworm, although it is present in other lepidopteran insects, including Danaus plexippus and Heliconius melpomene. Microarray data revealed that the Fox genes have distinct expression patterns in the tissues on day 3 of the 5th instar larva. A Gene Ontology analysis suggested that the Fox genes have roles in cellular components, molecular functions, and biological processes, except in pore complex biogenesis. An analysis of the selective pressure on the proteins indicated that most of the amino acid sites in the Fox proteins are undergoing strong purifying selection. Here, we summarize the general characteristics of the Fox genes in the silkworm, which should support further functional studies of the silkworm Fox proteins.

[A high sensitivity micro-ring humidity sensor based on U-shaped waveguide coupled single micro-ring structure].

The paper proposes a novel high sensitivity humidity sensor based on a U-shaped waveguide-coupled single micro-ring, Polyimide is used as the wet material, the refractive index of humidity-sensing part changes as relative humidity changes, thus leading to a obvious peak drift. The transfer function of the structure is derived basing on transfer matrix method and the paper mainly discusses the influence on the output spectrum with different humidity-sensing parts. Through the theoretical simulation of Matlab, the whole structure of U-shaped waveguide coupled single micro-ring is proved to be the best humidity-sensing part. The free spectral range (FSR) will be doubled compared to the traditional single micro ring structure while the length between the two coupling points of the U-shaped waveguide is an integer multiple of circumference of the micro-ring. When the relative humidity of external environment changes from 10% RH to 100% RH, the output spectrum appears a obvious drift from 0.027 to 0.191 microm and the sensitivity reaches up to 0.0018 microm/% RH. Compared to FBG humidity sensor with high sensitivity, the sensitivity in this article is increased by 10 to 100 times, achieving a high sensitivity in the sense of humidity when the wide range of filter frequency selection is taken into account.

[A Surface Plasmon Micro-Ring Sensor Suitable for Humidity Sensing].

Temperature is a very important parameter in scientific research, production and life. Almost all the properties of materials are related to temperature. The precise measurement of the temperature is a very important task, so the temperature sensor is widely used as a core part in the temperature measuring instrument. A novel surface plasmon micro-ring sensor suitable for humidity sensing is presented in this paper. The sensor uses a multi-layered surface plasmon waveguide structure and choosing Polyimide (Polyimide, PI) as the moisture material. We get the transfer function of surface plasmon micro-ring sensor by using transfer matrix method. Refractive indexes of Polyimide and the multilayer waveguide structure change as environment relative humidity changes, thus leading to an obvious peak drift of output spectrum. The paper mainly discusses the influence of the changes of the refractive index of humidity-sensing parts on the output spectrum, and the transmission characteristics of multilayer waveguide structure. Through the finite element method and the theoretical simulation of Matlab, We can draw: When the length between the two coupling points of the U-shaped waveguide is an integer multiple of circumference of the micro-ring, an obvious drift in the horizontal direction appears, the free spectral range (FSR) doubled and the sensitivity is 0.0005 µm/%RH; When the external environment relative humidity RH changes from 10% to 100% RH, scatter is change between including (including 0.005 m to 0.005 m, compared to other humidity sensor, the Sensitivity of sensor improves 10~50 times and the transmission is very stable. Results show that the design of surface plasma micro ring sensors has better sensitivity, stable performance and can be used in the humidity measurement, achieving a high sensitivity in the sense of humidity when the wide range of filter frequency selection is taken into account, and providing a theoretical basis for the preparation of micro-optics.

Laser photofabrication of cell-containing hydrogel constructs.

The two-photon polymerization (2PP) of photosensitive gelatin in the presence of living cells is reported. The 2PP technique is based on the localized cross-linking of photopolymers induced by femtosecond laser pulses. The availability of water-soluble photoinitiators (PI) suitable for 2PP is crucial for applying this method to cell-containing materials. Novel PIs developed by our group allow 2PP of formulations with up to 80% cell culture medium. The cytocompatibility of these PIs was evaluated by an MTT assay. The results of cell encapsulation by 2PP show the occurrence of cell damage within the laser-exposed regions. However, some cells located in the immediate vicinity and even within the 2PP-produced structures remain viable and can further proliferate. The control experiments demonstrate that the laser radiation itself does not damage the cells at the parameters used for 2PP. On the basis of these findings and the reports by other groups, we conclude that such localized cell damage is of a chemical origin and can be attributed to reactive species generated during 2PP. The viable cells trapped within the 2PP structures but not exposed to laser radiation continued to proliferate. The live/dead staining after 3 weeks revealed viable cells occupying most of the space available within the 3D hydrogel constructs. While some of the questions raised by this study remain open, the presented results indicate the general practicability of 2PP for 3D processing of cell-containing materials. The potential applications of this highly versatile approach span from precise engineering of 3D tissue models to the fabrication of cellular microarrays.

[Spectral characteristics of novel accelerometer based on optical microring resonator].

A structure of an optical accelerometer based on an optical single ring resonator located onto the cantilever is proposed to meet the requirements of microminiaturization and economical applications in the present paper. The spectra of out port are obtained using transfer matrix method and theory of coupled modes. According to the measurement of intensity of drop port at the same wavelength, the influences of different structure parameters on the sensitivity of the whole acceleration sensor are analyzed. The results show that the cantilever length and thickness and the ring resonator position are all key factors which can influence the sensing property of acceleration sensor. Hence the sensitivity can be effectively improved by adjusting the factors mentioned above. The sensitivity reaches up to 2.112 g(-1) and the limit of detection can achieve 1.421 x 10(-3) at 1.515 µm with a cantilever of 180 µm in length and 3 in thickness for a 30 dB signal-noise system. Such structure has great potential to develop low-cost and easy made high sensitive acceleration meter.