Loss-of-function mutations in IQCN cause male infertility in humans and mice owing to total fertilization failure.

Fertilization failure is a significant manifestation of unexplained male infertility. Previous work has suggested a genetic origin. In this study, we report on a man with unexplained infertility from a large consanguineous marriage family. Whole-exome sequencing and Sanger sequencing identified a homozygous frameshift variation of the IQ motif containing N (IQCN; GenBank: NM_001145304.1; c.1061_1062delAT; p.Y354Sfs*13) in the proband and one of his two brothers, who also remained infertile. Analyses of spermatozoa by quantitative RT-PCR indicated that the level of IQCN mRNA was significantly reduced compared to fertile men and the protein could not be detected by western blotting and immunofluorescent staining in the proband. Immunofluorescent staining of spermatozoa from fertile men showed that IQCN was located in the acrosomal region and translocated to the equatorial segment after the acrosome reaction. The proband spermatozoa had abnormal morphology and function. Finally, the proband couple underwent IVF with donor sperm and a healthy baby was born. Furthermore, we developed an Iqcn-KO mouse model using the CRISPR/Cas9 technique. Sperm quality, except for sperm motility, and the fertility of male Iqcn-/- mice were consistent with those of the proband. In conclusion, the findings in humans and mice demonstrate that the homozygous frameshift variant of IQCN causes male infertility owing to autosomal-recessive fertilization failure.

The deformities of acute diaphyseal clavicular fractures: a three-dimensional analysis.

BACKGROUND: Although minimally invasive surgeries have gained popularity in many orthopaedic fields, minimally invasive approaches for diaphyseal clavicular fracture have not been widely performed, which is attributed to difficulties in performing a closed reduction of fracture deformities of a curved bone in a three-dimensional space. The goal of this study was to investigate the radiographic parameters of fracture deformities in a three-dimensional space and to identify the risk factors for deformities. METHODS: The computed tomography images of 100 patients who sustained a clavicle fracture were included. Five parameters were used to analyze the deformities: change in clavicle length, fracture displacement, and fragment rotation around the X, Y, Z axes. The change in length was assessed using the length of the endpoint line. The displacement was assessed using the distance between the fracture midpoints. The rotation deformities were assessed using the Euler angles. The correlation between the parameters was evaluated with the Pearson correlation coefficient. The risk factors were evaluated using univariable analysis and multiple regression analysis. RESULTS: The average change in length was - 5.3 ± 8.3 mm. The displacement was 11.8 ± 7.1 mm. The Euler angles in the Z-Y-X sequences were -1 ± 8, 1 ± 8, and - 8 ± 13 degrees. The correlation coefficient between the change in length and the displacement was - 0.724 (p < 0.001). The variables found to increase the risk of shortening and displacement were right-sided fracture (p = 0.037), male sex (p = 0.015), and multifragmentary type (p = 0.020). The variables found to increase the risk of rotation deformity were the number of rib fractures (p = 0.001) and scapula fracture (p = 0.025). CONCLUSIONS: There was a strong correlation between shortening and displacement. The magnitude of anterorotation around the X axis was greater than the magnitude of retraction around the Z axis and depression around the Y axis. The risk factors for shortening and displacement included right-sided fracture, male sex, and multifragmentary type. The risk factor for retraction around the Z axis was the number of rib fractures, and the risk factor for depression around the Y axis was scapula fracture. These results could be useful adjuncts in guiding minimally invasive surgical planning for diaphyseal clavicular fractures.

miR-424-5p combined with miR-17-5p has high diagnostic efficacy for endometriosis.

PURPOSE: Endometriosis (EMT) is a chronic benign disease with high prevalence. This study investigated the diagnostic value of serum miR-17-5p, miR-424-5p, and their combined expressions for EMT. METHODS: Total 80 EMT patients of reproductive age who underwent laparoscopy or laparotomy and were confirmed by pathological examination were included as the study subjects, and another 80 healthy women of reproductive age receiving gynecological examination and ultrasonography with no pelvic abnormalities were selected as the control group. The whole blood samples of enrolled subjects were collected and clinical characteristics were recorded. The miR-17-5p, miR-424-5p, VEGFA, IL-4, and IL-6 levels in the serum were measured. ROC curve was used to evaluate the diagnostic efficacy of miR-17-5p and miR-424-5p expressions for EMT. Pearson correlation was performed to analyze the correlation of miR-17-5p and miR-424-5p with clinical indexes in EMT patients. RESULTS: miR-17-5p and miR-424-5p were downregulated in EMT patients. For diagnosing EMT, the AUC of miR-17-5p was 0.865 and cutoff value was 0.890 (91.3% sensitivity and 85% specificity), the AUC of miR-424-5p was 0.737, and cutoff value was 0.915 (98.8% sensitivity and 61.2% specificity), and the AUC of miR-424-5p combined with miR-17-5p was 0.938 and cutoff value was 2.205 (93.8% sensitivity and 88.7% specificity), with the diagnostic efficacy higher than miR-424-5p or miR-17-5p alone. miR-17-5p and miR-424-5p expressions were negatively correlated with dysmenorrhea, infertility, pelvic pain, and rASRM stage, but not with age, BMI, menstrual disorder, and nulliparity. VEGFA, IL-4, IL-6, and CA-125 were increased in EMT patients and were inversely associated with miR-17-5p and miR-424-5p. CONCLUSION: miR-424-5p combined with miR-17-5p has high diagnostic efficacy for EMT.

Fracture edge features of diaphyseal clavicular fractures: a morphologic study.

BACKGROUND: Previous researchers used transverse fractures centered over the midpoint of the clavicle as the diaphyseal clavicular fracture models. However, as a result of shear stress concentration in sigmoid-shaped structures, most diaphyseal clavicular fractures have coronal fracture edges and are located distal to the midpoint. The purpose of this study was to quantify the morphology and utilize these parameters to establish clinically relevant fracture models. METHODS: The computed tomographic DICOM data of 100 consecutive patients were included. We investigated the morphologic characteristics of the fracture edges after virtual fracture reduction. The fracture orientation was determined based on the normal vectors of the best-fit plane of the fracture edges. The fracture location was measured by the extreme points of the edges. The fracture configuration was evaluated using fracture maps. RESULTS: There were 28 simple, 43 wedge, and 29 multifragmentary types. Coronal oriented fracture edges accounted for more than 70% of the simple, wedge, and multifragmentary types. The most proximal point of the proximal edge was located at 46.7% (42.0%-56.5%), 47.6% (42.5%-50.1%), and 46.3% (42.0%-49.3%) of the endpoint line in the simple, wedge, and multifragmentary types, respectively (P = .548). The most distal point of the distal edge was located at 72.2% (68.4%-75.0%), 73.2% (69.5%-76.9%), and 74.0% (69.6%-77.1%) of the endpoint line (P = .353). The longest proximal main fragments occurred in the simple types at 71.9% (66.3%-75.4%) of the endpoint line (P < .001), and the shortest distal main fragments occurred in the multifragmentary types at 55.8% (49.8%-59.3%) of the endpoint line (P = .001). The heatmaps showed a high concentration of anteriorly distributed wedge fragments (88%; n = 38/43) and coronally distributed multifragmentary fragments (62%; n = 18/29). CONCLUSIONS: We showed that typical diaphyseal clavicular fractures have coronal fracture edges and are located within the distal half of the diaphyseal segment. The fractured fragments were initiated anteriorly in the wedge types and then propagated coronally in the multifragmentary types. The features of these fracture edges could be useful in designing osteotomy models and provide different perspectives of anterior and superior plating techniques.

Biomechanical analysis of tibial plateau posterolateral fracture fragment fixation and introduction of a lateral tibia plateau hook plate system.

BACKGROUND: Fixing the posterolateral fragments of tibial plateau fractures has been challenging owing to potential neurovascular injuries and fibular head blocks. Several surgical approaches and fixation techniques have been reported, with distinct limitations. We propose a novel lateral tibia plateau hook plate system and compare its biomechanical stability with other fixation methods. METHODS: Twenty-four synthetic tibia models were simulated to present posterolateral tibial plateau fractures. These models were randomly assigned to three groups. Group A models were fixed with the lateral tibia plateau hook plate system, Group B with variable-angle anterolateral locking compression plates, and Group C with direct posterior buttress plates. The models' biomechanical stability was evaluated using static (gradually increased axial compressive loads) and fatigue (cyclically loaded from 100 to 600 N for 2000 cycles each) tests. RESULTS: Groups A and C models exhibited comparable axial stiffness, subsidence load, failure load, and displacement in the static test. Group A model exhibited higher subsidence and failure loads than Group B model. Groups A and C models exhibited comparable displacement at 100 N cyclic loading in the fatigue test. Group C model was more stable at higher loads. Group C model endured the highest subsidence cycle numbers, followed by Groups A and B models. CONCLUSIONS: The lateral tibia plateau hook plate system provided similar static biomechanical stability as the direct posterior buttress plates and comparable dynamic stability under limited axial loading. This system is a potential posterolateral treatment choice owing to its convenience and safety, in treating tibia plateau fractures.

Factors influencing mosaicism: a retrospective analysis.

RESEARCH QUESTION: What factors affect the incidence of mosaic embryos resulting from assisted reproductive technology? DESIGN: A retrospective analysis of data from preimplantation genetic testing for aneuploidies in 544 couples was conducted using data from an electronic medical record database. RESULTS: Of 1910 embryos studied, 127 (6.6%) were mosaic. In multivariable logistic regression analysis, mosaicism incidence increased in embryos from IVF versus intracytoplasmic sperm injection (ICSI) (odds ratio [OR] 4.560, 95% confidence interval [CI] 2.800-7.424, P < 0.001), and in embryos from abnormal versus normal semen (OR 3.496, 95% CI 2.455-4.979, P < 0.001). Embryos tested using SurePlex 24Sure had lower mosaicism percentages than those tested using MALBAC-NGS and PicoPLEX GenetiSure (OR 2.726, 95% CI 1.532-4.852, P = 0.001; OR 2.389, 95% CI 1.537-3.711, P < 0.001, respectively). CONCLUSIONS: Semen quality, fertilization method and detection system are independent factors associated with embryonic mosaicism.

Signal processing assisted Vernier effect in a single interferometer for sensitivity magnification.

The Vernier effect magnifies optical sensitivity by the superposition of two spectra with slightly shifted frequencies from a sensing interferometer (SIM) and a reference interferometer (RIM). In this study, we demonstrate that the Vernier effect can be obtained through a single interferometer, which detects the changed signal and provides an artificial reference spectrum (ARS) to be superposed with the changed signal spectrum. The ARS extracted by spatial frequency down-conversion of one sensing spectrum in the signal processing is not affected by environmental changes and can be detuned at an arbitrarily small amount with the measured signal spectrum. This approach is simpler and accurate and provides ultrahigh sensitivity. To validate the principle, a Mach-Zehnder (MZ) interferometer based on a dual-mode microfiber was designed for sensing the refractive index (RI) change magnification, and a high sensitivity of 71354.58 nm/refractive index unit (RIU) was obtained with good linearity.

[Application of mapping allele with resolved carrier status technique for preimplantation genetic testing in carriers with balanced chromosomal translocations].

OBJECTIVE: To assess the application value of mapping allele with resolved carrier status (MaReCs) technique for preimplantation genetic testing (PGT). METHODS: The characteristics of MaReCs for PGT and outcome of patients were retrospectively analyzed. RESULTS: Compared with those who could not use the technique, carriers who have used the MaReCs technique were younger, had significantly higher level of anti-Mullerian hormone, more antral follicles, occytes, mature occytes, biopsied embryos and euploid embryos, and lower risks for de novo chromosomal abnormality (P<0.05). It was necessary for couples with fewer oocytes, mature oocytes and balstocyst to preserve discarded embryos to facilitate the test. Carriers who have used the MaReCs technique had higher clinical pregnancy rate and abortion rate compared with those undergoing routine PGT, albeit no significant difference was found between the two groups (P> 0.05). Carriers undergoing MaReCs test could preferentially select embryos with normal chromosome structures for the transfer. CONCLUSION: Application of MaReCs has a prerequisite for having a minimum number of occytes and biopsied embryos and using discarded embryos sometimes. MaReCs is efficient for the detection of carrier status of embryos and attaining higher rate of pregnancy and live birth, which can significantly improve the outcome for couples carrying chromosomal translocations.

Ultrasensitive refractive index sensor based on enhanced Vernier effect through cascaded fiber core-offset pairs.

An ultrasensitive refractive index (RI) sensor based on enhanced Vernier effect is proposed, which consists of two cascaded fiber core-offset pairs. One pair functions as a Mach-Zehnder interferometer (MZI), the other with larger core offset as a low-finesse Fabry-Perot interferometer (FPI). In traditional Vernier-effect based sensors, an interferometer insensitive to environment change is used as sensing reference. Here in the proposed sensor, interference fringes of the MZI and the FPI shift to opposite directions as ambient RI varies, and to the same direction as surrounding temperature changes. Thus, the envelope of superimposed fringe manifests enhanced Vernier effect for RI sensing while reduced Vernier effect for temperature change. As a result, an ultra-high RI sensitivity of -87261.06 nm/RIU is obtained near the RI of 1.33 with good linearity, while the temperature sensitivity is as low as 204.7 pm/ °C. The proposed structure is robust and of low cost. Furthermore, the proposed scheme of enhanced Vernier effect provides a new perspective and idea in other sensing field.

Circular RNA ITCH suppresses proliferation, invasion, and glycolysis of ovarian cancer cells by up-regulating CDH1 via sponging miR-106a.

BACKGROUND: Accumulating data suggested that circular RNAs (circRNAs) played important roles in the development of human cancer. However, the potential mechanism of circRNAs in ovarian cancer remains unclear. METHODS: Quantitative real-time polymerase chain reaction (qRT-PCR) was used to measure the levels of circRNA itchy E3 ubiquitin protein ligase (circ-ITCH), microRNA-106a (miR-106a) and E-cadherin (CDH1). Cell Counting Kit-8 (CCK-8) and Transwell assay were carried out to measure cell proliferation and invasion. Glucose consumption, lactate production, and ATP level were assessed by the glucose, lactate, and ATP assay kits, respectively. Cell apoptosis was detected by Flow cytometry. The binding sites were predicted by StarBase v.2.0 or microT-CDS and verified by dual-luciferase reporter assay and RNA immunoprecipitation (RIP) assays. CDH1 protein level was determined by western blot. The functional role of circ-ITCH was measured by xenograft tumor model in vivo. RESULTS: Circ-ITCH was down-regulated in ovarian cancer and positively correlated with 5-year overall survival of patients with ovarian cancer. RNase R digestion assay confirmed that circ-ITCH was more stable than its linear mRNA form. Moreover, circ-ITCH was mainly distributed in the cytoplasm of ovarian cancer cells.Functionally, circ-ITCH overexpression hindered proliferation, invasion, glycolysis and promoted apoptosis of ovarian cancer cells. Besides, circ-ITCH overexpression inhibited ovarian cancer cell progression by targeting miR-106a. Additionally, CDH1 was a target of miR-106a, and the protein level of CDH1 was negatively regulated by miR-106a. Similarly, CDH1 knockdown recovered the inhibition effects of miR-106a inhibitor or circ-ITCH overexpression on the progression of ovarian cancer cells. Importantly, circ-ITCH up-regulated the protein level of CDH1 by sponging miR-106a in ovarian cancer cells. Circ-ITCH overexpression suppressed the growth of ovarian cancer cells in vivo. CONCLUSION: Circ-ITCH suppressed proliferation, invasion, glycolysis, and promoted apoptosis of ovarian cancer cells by modulating the miR-106a/CDH1 axis.

Biomechanical analysis of single-level interbody fusion with different internal fixation rod materials: a finite element analysis.

BACKGROUND: Lumbar spinal fusion with rigid spinal fixators as one of the high risk factors related to adjacent-segment failure. The purpose of this study is to investigate how the material properties of spinal fixation rods influence the biomechanical behavior at the instrumented and adjacent levels through the use of the finite element method. METHODS: Five finite element models were constructed in our study to simulate the human spine pre- and post-surgery. For the four post-surgical models, the spines were implanted with rods made of three different materials: (i) titanium rod, (ii) PEEK rod with interbody PEEK cage, (iii) Biodegradable rod with interbody PEEK cage, and (iv) PEEK cage without pedicle screw fixation (no rods). RESULTS: Fusion of the lumbar spine using PEEK or biodegradable rods allowed a similar ROM at both the fusion and adjacent levels under all conditions. The models with PEEK and biodegradable rods also showed a similar increase in contact forces at adjacent facet joints, but both were less than the model with a titanium rod. CONCLUSIONS: Flexible rods or cages with non-instrumented fusion can mitigate the increased contact forces on adjacent facet joints typically found following spinal fixation, and could also reduce the level of stress shielding at the bone graft.

The clinical application of preimplantation genetic diagnosis for X-linked retinitis pigmentosa.

OBJECTIVE: To investigate the usefulness of preimplantation genetic diagnosis (PGD) based on mutated allele revealed by sequencing with aneuploidy and linkage analyses (MARSALA) for a pedigree with X-linked retinitis pigmentosa (XLRP). METHODS: One pathogenic mutation (c.494G > A) of the retinitis pigmentosa GTPase regulator (RPGR) gene was identified in a pedigree affected by XLRP. Then, PGD was carried out for the couple, of which the wife was an XLRP carrier. Three blastocysts were biopsied and then MARSALA was performed by next-generation sequencing (NGS). Prenatal diagnosis was also carried out to confirm the PGD results. RESULTS: Three blastocysts were all unaffected. Then, one of the embryos was chosen randomly to be transferred, and the pregnancy was acquired successfully. The results of prenatal diagnosis were consistent with the PGD results. The fetus did not carry RPGR mutation (c.494G > A) and had normal chromosome karyotype. As a result, a healthy baby free of XLRP condition was born. CONCLUSION: The PGD method based on MARSALA was established and applied to a family with XLRP successfully. MARSALA will be a valid tool, not only for XLRP families but also for families affected with other monogenetic disorders, to prevent transmission of the genetic disease from parents to offspring.

Novel mandibular advancement bite block with supplemental oxygen to both nasal and oral cavity improves oxygenation during esophagogastroduodenoscopy: a bench comparison.

Drug-induced respiratory depression is a major cause of serious adverse events. Adequate oxygenation is very important during sedated esophagogastroduodenoscopy (EGD). Nasal breathing often shifts to oral breathing during open mouth EGD. A mandibular advancement bite block was developed for EGD using computer-assisted design and three-dimensional printing techniques. The mandible is advanced when using this bite block to facilitate airway opening. The device is composed of an oxygen inlet with one opening directed towards the nostril and another opening directed towards the oral cavity. The aim of this bench study was to compare the inspired oxygen concentration (FiO2) provided by the different nasal cannulas, masks, and bite blocks commonly used in sedated EGD. A manikin head was connected to one side of a two-compartment lung model by a 7.0 mm endotracheal tube with its opening in the nasopharyngeal position. The other compartment was driven by a ventilator to mimic "patient" inspiratory effort. Using this spontaneously breathing lung model, we evaluated five nasal cannulas, two face masks, and four new oral bite blocks at different oxygen flow rates and different mouth opening sizes. The respiratory rate was set at 12/min with a tidal volume of 500 mL and 8/min with a tidal volume of 300 mL. Several Pneuflo resistors of different sizes were used in the mouth of the manikin head to generate different degrees of mouth opening. FiO2 was evaluated continuously via the endotracheal tube. All parameters were evaluated using a Datex anesthesia monitoring system. The mandibular advancement bite block provided the highest FiO2 under the same supplemental oxygen flow. The FiO2 was higher for devices with oxygen flow provided via an oral bite block than that provided via the nasal route. Under the same supplemental oxygen flow, the tidal volume and respiratory rate also played an important role in the FiO2. A low respiratory rate with a smaller tidal volume has a relative high FiO2. The ratio of nasal to oral breathing played an important role in the FiO2 under hypoventilation but less role under normal ventilation. Bite blocks deliver a higher FiO2 during EGD. The ratio of nasal to oral breathing, supplemental oxygen flow, tidal volume, and respiratory rate influenced the FiO2 in most of the supplemental oxygen devices tested, which are often used for conscious sedation in patients undergoing EGD and colonoscopy.

Oral capnography is more effective than nasal capnography during sedative upper gastrointestinal endoscopy.

The role of capnography in esophagogastroduodenoscopy (EGD) is controversial. Simultaneous supplemental oxygen, position of patient, open mouth breathing pattern, and anatomy of the oral and nasal cavity can influence capnography accuracy. This study first measured capnographic data via the nasal or oral cavity during sedated EGD. Secondly, we investigated the influence of supplementary oxygen through the oral cavity on the capnographic reading. Patients with ASA class I or II status admitted for routine EGD exams were enrolled. End-tidal carbon dioxide measurements were performed simultaneously via nasal catheter and oral catheter with standard oral bite and nasal cannula supplementary oxygen when the patient is awake, during sedation and during sedation with endoscopy. The influence of oral supplementary oxygen, oral capnography were recorded using a mandibular advancement bite block. One hundred and four patients were enrolled. Breathing in the conscious patient is conducted primarily via the nostrils (95%). When sedated with endoscope placement, the percentage of nasal breathing decreased significantly to 47% and oral capnography sufficiently captured data in 100% of patients. Supplementary oral oxygen decreased oral capnographic measurement significantly (38.89 ± 7.148 vs. 30.73 ± 7.84, p < 0.001). However, the measurements using the MA bite block did not differ from oral cavity catheter (28.86 ± 8.51 vs. 30.73 ± 7.839, p = 0.321). The conscious patient breathes mostly nasally while the sedated patient breathes mostly orally during EGD when an oral bite is in place. Capnography measurement via oral cannula increases the measurement accuracy and efficacy. Oral supplementary oxygen may decrease capnographic measurement but still provide sufficient reading for interpretation.

[Analysis of chromosomes of embryos derived from translocation carriers during preimplantation genetic diagnosis cycles].

OBJECTIVE: To explore the effect of chromosomal translocations on the composition of embryonic chromosomes and its mechanism. METHODS: For 52 couples with one partner carrying a chromosomal translocation, results of next generation sequencing of all embryos derived from 61 cycles were divided into different groups based on the type of translocations, gender of the carrier, and maternal age. Effect of parental chromosomal translocations on the composition of embryonic chromosomes of each group was analyzed. RESULTS: A significant difference was found between carriers of reciprocal and Robertsonian translocations in terms of proportion of abnormal embryos and structurally normal chromosomes (63.3% vs. 27.5%, and 1.1% vs. 0.3%, respectively). Compared with male carriers, there was an increase in the rate of abnormalities for female carriers (67.2% vs. 58.3% for reciprocal translocations, and 45.5% vs. 13.8% for Robertsonian translocations). The risk for chromosomal abnormality also increased with the maternal age. No significant difference was found in the proportion of abnormal embryos between carriers divided by involvement of acrocentric chromosomes or terminal chromosomal breakpoints. CONCLUSION: The types of parental translocation, gender of carrier, maternal age, and interchromosomal effect have certain effect on the composition of embryonic chromosomes.

Biomechanical interactions of endodontically treated tooth implant-supported prosthesis under fatigue test with acoustic emission monitoring.

BACKGROUND: This study investigated the biomechanical interactions in endodontically treated tooth implant-supported prosthesis (TISP) with implant system variations under dynamic cyclic loads monitored using the acoustic emission (AE) technique. METHODS: Macrostructure implants using a taper integrated screw-in (TIS; 2-piece implant) and a retaining-screw (RS; 3-piece implant) connected to an abutment were used for this investigation and their corresponding mechanical resistances in conformity with the ISO 14801 standard were evaluated. The endodontically treated TISP samples were constructed containing TIS and RS implants splinted to the second premolar with fatigue tests performed by applying occlusal force onto the premolar simulating the bending moment effect. The numbers of accumulated AE signals in the fatigue tests and failure modes for the sample were recorded to evaluate the mechanical resistance. RESULT: The maximum load in the static test for RS (3-piece) implant (797N) was significantly higher than that for the TIS (2-piece) implant (559N). Large deformations were found at abutment screws in both RS and TIS implants. Although the numbers of accumulated AE signals for the TIS implant (72511) were higher than those for the RS implant (437), statistical non-significant differences were found between TIS and RS implants. No obvious damage was noted in endodontically treated TISP samples using RS implants but two of the corresponding TIS implants fractured in the abutment screws. CONCLUSIONS: Splints with RS (3-piece) implant prosthesis produce better mechanical responses than the TIS (2-piece) implant when connected to an endodontically treated tooth restored with a post core and crown.

[Experiment on Jianpi Qingre Huoxue Decoction Drug Serum Regulates SW480 Cell Proliferation,Apoptosis,Cycle and the Expression of ß-Catenin by Altering PI3K/Akt Signal Pathway].

Objective: To study Jianpi Qingre Huoxue decoction( JPQRHX) in preventing colon cancer by observing SW480 cells proliferation,apoptosis,cycle and the expression of P-ß-catenin, and to research its mechanism. Methods: SW480 cells were incubated with serum containing blank serum, different concentrations of JPQRHX decocition and PI3 K blocking agent LY294002 for 24 h,respectively. Cell proliferation was detected by MTT assay, cell cycle and apoptosis were detected by flow cytometry. The protein translocation of P-ß-catenin was assayed by immunofluorescent staining. Results: The inhibitory rate and apoptosis rate in JPQRHX decoction group were higher than control group( P < 0. 05),respectively. S phase cells were increased significantly, and G1 phase cells and LY294002 group cells were decreased significantly( P < 0. 05). The P-ß-catenin in JPQRHX decoction groups were mainly expressed in membrane, while the P-ß-catenin in the control group was characterized by deletion in membrane and increased in nucleus. Conclusion: JPQRHX decoction has the ability in curing colon cancer, and the mechanism is associated with altering the expression of P-ß-catenin in the cells nucleus, blocking SW480 cells cycle at G1 phase, inhibiting SW480 cells proliferation, and inducing SW480 cell apoptosis.

Miniature endoscopic optical coherence tomography for calculus detection.

The effective treatment of periodontitis involves the detection and removal of subgingival dental calculus. However, subgingival calculus is more difficult to detect than supragingival calculus because it is firmly attached to root surfaces within periodontal pockets. To achieve a smooth root surface, clinicians often remove excessive amounts of root structure because of decreased visibility. In addition, enamel pearl, a rare type of ectopic enamel formation on the root surface, can easily be confused with dental calculus in the subgingival environment. In this study, we developed a fiber-probe swept-source optical coherence tomography (SSOCT) technique and combined it with the quantitative measurement of an optical parameter [standard deviation (SD) of the optical coherence tomography (OCT) intensity] to differentiate subgingival calculus from sound enamel, including enamel pearl. Two-dimensional circumferential images were constructed by rotating the miniprobe (0.9 mm diameter) while acquiring image lines, and the adjacent lines in each rotation were stacked to generate a three-dimensional volume. In OCT images, compared to sound enamel and enamel pearls, dental calculus showed significant differences (P<0.001) in SD values. Finally, the receiver operating characteristic curve had a high capacity (area under the curve=0.934) for discriminating between healthy regions (including enamel pearl) and dental calculus.

A Revolving Temporary Anchorage Cap Connecting to an Orthodontic Miniscrew Using In Vitro Experimental Testing: Safety and Biomechanical Evaluations.

PURPOSE: This study is to develop a plastic revolving (translation and rotation) temporary anchorage cap (TAC) as the orthodontic anchor and evaluate its biomechanical safety and clinical used feasibility. MATERIALS AND METHODS: The TAC was designed to connect onto a mini-implant head with 45-degree switching unit and extended arm for tying an orthodontic elastic chain/coil spring. The removal force between the TAC and mini-implant head and torque resistance on the mini-implant/bone interface were performed to evaluate the biomechanical safety. Clinical molar uprighting and mesial drive application were performed to reveal the TAC feasibility/capacity. RESULTS: The removal force was 43.95 N (>>finger-pulling force 9.3 N) to prevent the TAC from detaching, and the torque resistance was 159.25 N·mm to maintain micromotion smaller than 30.4 µm between the screw and bone. The strain value in using TAC treatment was found to be about 2 times that of traditional tracing (without using TAC) in molar uprighting/mesial drive application. CONCLUSIONS: The plastic revolving TAC can provide optional use with translation/rotation features to change the angles and directions in orthodontic tractions and increase treatment efficiency under biomechanical safety considerations.

Examination of ceramic restoration adhesive coverage in cusp-replacement premolar using acoustic emission under fatigue testing.

BACKGROUND: This study investigates CAD/CAM ceramic cusp-replacing restoration resistance with and without buccal cusp replacement under static and dynamic cyclic loads, monitored using the acoustic emission (AE) technique. METHOD: The cavity was designed in a typical MODP (mesial-occlusal-distal-palatal) restoration failure shape when the palatal cusp has been lost. Two ceramic restorations [without coverage (WOC) and with (WC) buccal cuspal coverage with 2.0 mm reduction in cuspal height] were prepared to perform the fracture and fatigue tests with normal (200 N) and high (600 N) occlusal forces. The load versus AE signals in the fracture and fatigue tests were recorded to evaluate the restored tooth failure resistance. RESULTS: The results showed that non-significant differences in load value in the fracture test and the accumulated number of AE signals under normal occlusal force (200 N) in the fatigue test were found between with and without buccal cuspal coverage restorations. The first AE activity occurring for the WOC restoration was lower than that for the WC restoration in the fracture test. The number of AE signals increased with the cyclic load number. The accumulated number of AE signals for the WOC restoration was 187, higher than that (85) for the WC restoration under 600 N in the fatigue test. CONCLUSION: The AE technique and fatigue tests employed in this study were used as an assessment tool to evaluate the resistances in large CAD/CAM ceramic restorations. Non-significant differences in the tested fracture loads and accumulated number of AE signals under normal occlusal force (200 N) between different restorations indicated that aggressive treatment (with coverage preparation) in palatal cusp-replacing ceramic premolars require more attention for preserving and protecting the remaining tooth.