Two-billion-year-old volcanism on the Moon from Chang'e-5 basalts.

The Moon has a magmatic and thermal history that is distinct from that of the terrestrial planets1. Radioisotope dating of lunar samples suggests that most lunar basaltic magmatism ceased by around 2.9-2.8 billion years ago (Ga)2,3, although younger basalts between 3 Ga and 1 Ga have been suggested by crater-counting chronology, which has large uncertainties owing to the lack of returned samples for calibration4,5. Here we report a precise lead-lead age of 2,030 ± 4 million years ago for basalt clasts returned by the Chang'e-5 mission, and a 238U/204Pb ratio (µ value)6 of about 680 for a source that evolved through two stages of differentiation. This is the youngest crystallization age reported so far for lunar basalts by radiometric dating, extending the duration of lunar volcanism by approximately 800-900 million years. The µ value of the Chang'e-5 basalt mantle source is within the range of low-titanium and high-titanium basalts from Apollo sites (µ value of about 300-1,000), but notably lower than those of potassium, rare-earth elements and phosphorus (KREEP) and high-aluminium basalts7 (µ value of about 2,600-3,700), indicating that the Chang'e-5 basalts were produced by melting of a KREEP-poor source. This age provides a pivotal calibration point for crater-counting chronology in the inner Solar System and provides insight on the volcanic and thermal history of the Moon.

A dry lunar mantle reservoir for young mare basalts of Chang'e-5.

The distribution of water in the Moon's interior carries implications for the origin of the Moon1, the crystallization of the lunar magma ocean2 and the duration of lunar volcanism2. The Chang'e-5 mission returned some of the youngest mare basalt samples reported so far, dated at 2.0 billion years ago (Ga)3, from the northwestern Procellarum KREEP Terrane, providing a probe into the spatiotemporal evolution of lunar water. Here we report the water abundances and hydrogen isotope compositions of apatite and ilmenite-hosted melt inclusions from the Chang'e-5 basalts. We derive a maximum water abundance of 283 ± 22 µg g-1 and a deuterium/hydrogen ratio of (1.06 ± 0.25) × 10-4 for the parent magma. Accounting for low-degree partial melting of the depleted mantle followed by extensive magma fractional crystallization4, we estimate a maximum mantle water abundance of 1-5 µg g-1, suggesting that the Moon's youngest volcanism was not driven by abundant water in its mantle source. Such a modest water content for the Chang'e-5 basalt mantle source region is at the low end of the range estimated from mare basalts that erupted from around 4.0 Ga to 2.8 Ga (refs. 5,6), suggesting that the mantle source of the Chang'e-5 basalts had become dehydrated by 2.0 Ga through previous melt extraction from the Procellarum KREEP Terrane mantle during prolonged volcanic activity.

High abundance of solar wind-derived water in lunar soils from the middle latitude.

Remote sensing data revealed that the presence of water (OH/H2O) on the Moon is latitude-dependent and probably time-of-day variation, suggesting a solar wind (SW)-originated water with a high degassing loss rate on the lunar surface. However, it is unknown whether or not the SW-derived water in lunar soil grains can be preserved beneath the surface. We report ion microprobe analyses of hydrogen abundances, and deuterium/hydrogen ratios of the lunar soil grains returned by the Chang'e-5 mission from a higher latitude than previous missions. Most of the grain rims (topmost ~100 nm) show high abundances of hydrogen (1,116 to 2,516 ppm) with extremely low δD values (-908 to -992‰), implying nearly exclusively a SW origin. The hydrogen-content depth distribution in the grain rims is phase-dependent, either bell-shaped for glass or monotonic decrease for mineral grains. This reveals the dynamic equilibrium between implantation and outgassing of SW-hydrogen in soil grains on the lunar surface. Heating experiments on a subset of the grains further demonstrate that the SW-implanted hydrogen could be preserved after burial. By comparing with the Apollo data, both observations and simulations provide constraints on the governing role of temperature (latitude) on hydrogen implantation/migration in lunar soils. We predict an even higher abundance of hydrogen in the grain rims in the lunar polar regions (average ~9,500 ppm), which corresponds to an estimation of the bulk water content of ~560 ppm in the polar soils assuming the same grain size distribution as Apollo soils, consistent with the orbit remote sensing result.

GAUSS - genesis of asteroids and evolution of the solar system: A sample return mission to Ceres.

The goal of Project GAUSS (Genesis of Asteroids and evolUtion of the Solar System) is to return samples from the dwarf planet Ceres. Ceres is the most accessible candidate of ocean worlds and the largest reservoir of water in the inner Solar System. It shows active volcanism and hydrothermal activities in recent history. Recent evidence for the existence of a subsurface ocean on Ceres and the complex geochemistry suggest past habitability and even the potential for ongoing habitability. GAUSS will return samples from Ceres with the aim of answering the following top-level scientific questions: What is the origin of Ceres and what does this imply for the origin of water and other volatiles in the inner Solar System?What are the physical properties and internal structure of Ceres? What do they tell us about the evolutionary and aqueous alteration history of dwarf planets?What are the astrobiological implications of Ceres? Is it still habitable today?What are the mineralogical connections between Ceres and our current collections of carbonaceous meteorites?

Volcanic history of the Imbrium basin: A close-up view from the lunar rover Yutu.

We report the surface exploration by the lunar rover Yutu that landed on the young lava flow in the northeastern part of the Mare Imbrium, which is the largest basin on the nearside of the Moon and is filled with several basalt units estimated to date from 3.5 to 2.0 Ga. The onboard lunar penetrating radar conducted a 114-m-long profile, which measured a thickness of ∼5 m of the lunar regolith layer and detected three underlying basalt units at depths of 195, 215, and 345 m. The radar measurements suggest underestimation of the global lunar regolith thickness by other methods and reveal a vast volume of the last volcano eruption. The in situ spectral reflectance and elemental analysis of the lunar soil at the landing site suggest that the young basalt could be derived from an ilmenite-rich mantle reservoir and then assimilated by 10-20% of the last residual melt of the lunar magma ocean.

Trace element analysis of extraterrestrial metal samples by inductively coupled plasma mass spectrometry: the standard solutions and digesting acids.

RATIONALE: Nearly 99% of the total content of extraterrestrial metals is composed of Fe and Ni, but with greatly variable trace element contents. The accuracy obtained in the inductively coupled plasma mass spectrometry (ICP-MS) analysis of solutions of these samples can be significantly influenced by matrix contents, polyatomic ion interference, and the concentrations of external standard solutions. METHODS: An ICP-MS instrument (X Series 2) was used to determine 30 standard solutions with different concentrations of trace elements, and different matrix contents. Based on these measurements, the matrix effects were determined. Three iron meteorites were dissolved separately in aqua regia and HNO3. Deviations due to variation of matrix contents in the external standard solutions were evaluated and the analysis results of the two digestion methods for iron meteorites were assessed. RESULTS: Our results show obvious deviations due to unmatched matrix contents in the external standard solutions. Furthermore, discrepancy in the measurement of some elements was found between the sample solutions prepared with aqua regia and HNO3, due to loss of chloride during sample preparation and/or incomplete digestion of highly siderophile elements in iron meteorites. CONCLUSIONS: An accurate ICP-MS analysis method for extraterrestrial metal samples has been established using external standard solutions with matched matrix contents and digesting the samples with HNO3 and aqua regia. Using the data from this work, the Mundrabilla iron meteorite previously classified as IAB-ung is reclassified as IAB-MG.

Water and other volatiles on Mars.

This perspective reviews the recent advances in martian water and other volatiles and addresses the associated scientific questions for future martian exploration missions.

First classification of iron meteorite fragment preserved in Chang'e-5 lunar soils.

Lunar soil preserves numerous fragments of meteorites impacting on the Moon, providing a unique opportunity to investigate the distribution of the types of projectiles over billions of years. Here we report the first discovery of an iron meteorite fragment from the Chang'e-5 lunar soil, which consists mainly of martensite (quenched from taenite), kamacite, and schreibersite, with a trace of pentlandite. The meteorite fragment is Ni- and P-rich, S-poor, and based on its mineral chemistry and bulk composition, can be classified into the IID-group, a rare and carbonaceous group of iron meteorite originating in the outer Solar System. This meteorite fragment experienced only limited partial melting followed by fast cooling, suggestive of efficient preservation of intact remnants of iron meteorites impacting on the porous lunar regolith. Alternatively, it is a relic of a low-velocity impact of submillimeter-sized metal grains originated from an IID-like iron meteorite. Our observations demonstrate that it is feasible to achieve the type distribution of meteorites impacting on the Moon via systematically analyzing a large number of metal grains separated from lunar soils, thus shedding light on the dynamic evolution of the Solar System.

Higher water content observed in smaller size fraction of Chang'e-5 lunar regolith samples.

Water has been detected in lunar regolith, with multiple sources identified through the analysis of individual grains. However, the primary origin of water in the bulk lunar regolith remains uncertain. This study presents spectroscopic analyses of water content in sealed Chang'e-5 samples. These samples were sieved into various size fractions (bulk, <45 µm, and 45-355 µm) inside a glovebox filled with high-purity nitrogen. Results indicate a higher water content in the fine fractions (∼87 ± 11.9 ppm) than in bulk soil (∼37 ± 4.8 ppm) and coarse fractions (∼11 ± 1.5 ppm). This suggests that water is predominantly concentrated in the outermost rims of the regolith grains, and thus exhibits dependence on the surface volume ratio (also known as surface correlation), indicating solar wind is a primary source of lunar surface water. Laboratory, in-situ, and orbital results bridge sample analysis and remote sensing, offering a cohesive understanding of lunar surface water characteristics as represented by Chang'e-5. The discovery provides statistical evidence for the origin of water in lunar soil and can be considered representative of the lunar surface conditions. The water enrichment of the finest fraction suggests the feasibility of employing size sorting of lunar soils as a potential technological approach for water resource extraction in future lunar research stations.

Scientific objectives and payload configuration of the Chang'E-7 mission.

As the cornerstone mission of the fourth phase of the Chinese Lunar Exploration Program, Chang'E-7 (CE-7) was officially approved, and implementation started in 2022, including a main probe and a communication relay satellite. The main probe, consisting of an orbiter, a lander, a rover and a mini-flying probe, is scheduled to be launched in 2026. The lander will land on Shackleton crater's illuminated rim near the lunar south pole, along with the rover and mini-flying probe. The relay satellite (named Queqiao-2) will be launched in February 2024 as an independent mission to support relay communication during scientific exploration undertaken by Chang'E-4, the upcoming Chang'E-6 in 2024 and subsequent lunar missions. The CE-7 mission is mainly aimed at scientific and resource exploration of the lunar south pole. We present CE-7's scientific objectives, the scientific payloads configuration and the main functions for each scientific payload with its key technical specifications.

Return to the Moon: New perspectives on lunar exploration.

Lunar exploration is deemed crucial for uncovering the origins of the Earth-Moon system and is the first step for advancing humanity's exploration of deep space. Over the past decade, the Chinese Lunar Exploration Program (CLEP), also known as the Chang'e (CE) Project, has achieved remarkable milestones. It has successfully developed and demonstrated the engineering capability required to reach and return from the lunar surface. Notably, the CE Project has made historic firsts with the landing and on-site exploration of the far side of the Moon, along with the collection of the youngest volcanic samples from the Procellarum KREEP Terrane. These achievements have significantly enhanced our understanding of lunar evolution. Building on this success, China has proposed an ambitious crewed lunar exploration strategy, aiming to return to the Moon for scientific exploration and utilization. This plan encompasses two primary phases: the first crewed lunar landing and exploration, followed by a thousand-kilometer scale scientific expedition to construct a geological cross-section across the lunar surface. Recognizing the limitations of current lunar exploration efforts and China's engineering and technical capabilities, this paper explores the benefits of crewed lunar exploration while leveraging synergies with robotic exploration. The study refines fundamental lunar scientific questions that could lead to significant breakthroughs, considering the respective engineering and technological requirements. This research lays a crucial foundation for defining the objectives of future lunar exploration, emphasizing the importance of crewed missions and offering insights into potential advancements in lunar science.

NanoSIMS sulfur isotopic analysis at 100 nm scale by imaging technique.

NanoSIMS has been widely used for in-situ sulfur isotopic analysis (32S and 34S) of micron-sized grains or complex zoning in sulfide in terrestrial and extraterrestrial samples. However, the conventional spot mode analysis is restricted by depth effects at the spatial resolution < 0.5-1 µm. Thus sufficient signal amount cannot be achieved due to limited analytical depths, resulting in low analytical precision (1.5‰). Here we report a new method that simultaneously improves spatial resolution and precision of sulfur isotopic analysis based on the NanoSIMS imaging mode. This method uses a long acquisition time (e.g., 3 h) for each analytical area to obtain sufficient signal amount, rastered with the Cs+ primary beam of ∼100 nm in diameter. Due to the high acquisition time, primary ion beam (FCP) intensity drifting and quasi-simultaneous arrival (QSA) significantly affects the sulfur isotopic measurement of secondary ion images. Therefore, the interpolation correction was used to eliminate the effect of FCP intensity variation, and the coefficients for the QSA correction were determined with sulfide isotopic standards. Then, the sulfur isotopic composition was acquired by the segmentation and calculation of the calibrated isotopic images. The optimal spatial resolution of ∼ 100 nm (Sampling volume of 5 nm × 1.5 µm2) for sulfur isotopic analysis can be implemented with an analytical precision of ∼1‰ (1SD). Our study demonstrates that imaging analysis is superior to spot-mode analysis in irregular analytical areas where relatively high spatial resolution and precision are required and may be widely applied to other isotopic analyses.

Surges in volcanic activity on the Moon about two billion years ago.

The history of mare volcanism critically informs the thermal evolution of the Moon. However, young volcanic eruptions are poorly constrained by remote observations and limited samples, hindering an understanding of mare eruption flux over time. The Chang'e-5 mission returned the youngest lunar basalts thus far, offering a window into the Moon's late-stage evolution. Here, we investigate the mineralogy and geochemistry of 42 olivine and pyroxene crystals from the Chang'e-5 basalts. We find that almost all of them are normally zoned, suggesting limited magma recharge or shallow-level assimilation. Most olivine grains record a short timescale of cooling. Thermal modeling used to estimate the thickness and volume of the volcanism sampled by Chang'e-5 reveals enhanced magmatic flux ~2 billion years ago, suggesting that while overall lunar volcanic activity may decrease over time, episodic eruptions at the final stage could exhibit above average eruptive fluxes, thus revising models of lunar thermal evolution.

In situ analysis of surface composition and meteorology at the Zhurong landing site on Mars.

The Zhurong rover of the Tianwen-1 mission landed in southern Utopia Planitia, providing a unique window into the evolutionary history of the Martian lowlands. During its first 110 sols, Zhurong investigated and categorized surface targets into igneous rocks, lithified duricrusts, cemented duricrusts, soils and sands. The lithified duricrusts, analysed by using laser-induced breakdown spectroscopy onboard Zhurong, show elevated water contents and distinct compositions from those of igneous rocks. The cemented duricrusts are likely formed via water vapor-frost cycling at the atmosphere-soil interface, as supported by the local meteorological conditions. Soils and sands contain elevated magnesium and water, attributed to both hydrated magnesium salts and adsorbed water. The compositional and meteorological evidence indicates potential Amazonian brine activities and present-day water vapor cycling at the soil-atmosphere interface. Searching for further clues to water-related activities and determining the water source by Zhurong are critical to constrain the volatile evolution history at the landing site.

In situ detection of water on the Moon by the Chang'E-5 lander.

We report analysis results of the reflectance spectra (0.48 to 3.2 µm) acquired by the Chang'E-5 lander, which provides vital context of the returned samples from the Northern Oceanus Procellarum of the Moon. We estimate up to 120 parts per million (ppm) of water (OH + H2O) in the lunar regolith, which is mostly attributed to solar wind implantation. A light-colored and surface-pitted rock (named as CE5-Rock) is evident near the lander. The reflectance spectra suggest that CE5-Rock could be transported from an older basalt unit. CE5-Rock exhibits a stronger absorption, near 2.85 µm, than the surrounding regolith, with estimation of ~180 ppm of water if the model for estimating water content of regolith is applicable to rock samples, which may suggest an additional source from the lunar interior. The low water content of the regolith may suggest the degassing of mantle reservoir beneath the Chang'E-5 landing site.

Olivine-norite rock detected by the lunar rover Yutu-2 likely crystallized from the SPA-impact melt pool.

Chang'E-4 landed in the South Pole-Aitken (SPA) basin, providing a unique chance to probe the composition of the lunar interior. Its landing site is located on ejecta strips in Von Kármán crater that possibly originate from the neighboring Finsen crater. A surface rock and the lunar regolith at 10 sites along the rover Yutu-2 track were measured by the onboard Visible and Near-Infrared Imaging Spectrometer in the first three lunar days of mission operations. In situ spectra of the regolith have peak band positions at 1 and 2 µm, similar to the spectral data of Finsen ejecta from the Moon Mineralogy Mapper, which confirms that the regolith's composition of the landing area is mostly similar to that of Finsen ejecta. The rock spectrum shows similar band peak positions, but stronger absorptions, suggesting relatively fresh exposure. The rock may consist of 38.1 ± 5.4% low-Ca pyroxene, 13.9 ± 5.1% olivine and 48.0 ± 3.1% plagioclase, referred to as olivine-norite. The plagioclase-abundant and olivine-poor modal composition of the rock is inconsistent with the origin of the mantle, but representative of the lunar lower crust. Alternatively, the rock crystallized from the impact-derived melt pool formed by the SPA-impact event via mixing the lunar crust and mantle materials. This scenario is consistent with fast-cooling thermal conditions of a shallow melt pool, indicated by the fine to medium-sized texture (<3 mm) of the rock and the SPA-impact melting model [Icarus 2012; 220: 730-43].

China's present and future lunar exploration program.

Since the beginning of the 21st century, the pace of lunar exploration has accelerated, with more than a dozen probes having undertaken scientific exploration of the Moon. Prominent among these have been the robotic "Chang'E" (CE) missions of the China Lunar Exploration Program (CLEP). We discuss technological and scientific goals and achievements for the four completed, and four planned, CE missions, and longer-term goals and plans of the CLEP beyond the CE missions. The exploration plan is flexible and iterative, with an emphasis on international cooperation.

Air pollution-aerosol interactions produce more bioavailable iron for ocean ecosystems.

It has long been hypothesized that acids formed from anthropogenic pollutants and natural emissions dissolve iron (Fe) in airborne particles, enhancing the supply of bioavailable Fe to the oceans. However, field observations have yet to provide indisputable evidence to confirm this hypothesis. Single-particle chemical analysis for hundreds of individual atmospheric particles collected over the East China Sea shows that Fe-rich particles from coal combustion and steel industries were coated with thick layers of sulfate after 1 to 2 days of atmospheric residence. The Fe in aged particles was present as a "hotspot" of (insoluble) iron oxides and throughout the acidic sulfate coating in the form of (soluble) Fe sulfate, which increases with degree of aging (thickness of coating). This provides the "smoking gun" for acid iron dissolution, because iron sulfate was not detected in the freshly emitted particles and there is no other source or mechanism of iron sulfate formation in the atmosphere.

Young asteroidal fluid activity revealed by absolute age from apatite in carbonaceous chondrite.

Chondritic meteorites, consisting of the materials that have formed in the early solar system (ESS), have been affected by late thermal events and fluid activity to various degrees. Determining the timing of fluid activity in ESS is of fundamental importance for understanding the nature, formation, evolution and significance of fluid activity in ESS. Previous investigations have determined the relative ages of fluid activity with short-lived isotope systematics. Here we report an absolute 207Pb/206Pb isochron age (4,450±50 Ma) of apatite from Dar al Gani (DaG) 978, a type ∼3.5, ungrouped carbonaceous chondrite. The petrographic, mineralogical and geochemical features suggest that the apatite in DaG 978 should have formed during metamorphism in the presence of a fluid. Therefore, the apatite age represents an absolute age for fluid activity in an asteroidal setting. An impact event could have provided the heat to activate this young fluid activity in ESS.