[Identification of pyrrosiae folium and its adulterants based on psbA-trnH sequence].

In this study, the psbA-trnH sequence as DNA barcode was used to evaluate the accuracy and stability for identification pteridophyte medicinal material Pyrrosiae Foliumas from adulterants. Genomic DNA from 106 samples were extracted successfully. The Kimura 2-Parameter (K2P) distances and ML tree were calculated using software MEGA 6.0. The intra-specific genetic distances of 3 original plants were lower than inter-specific genetic distances of adulterants. The ML tree indicated that Pyrrosiae Folium can be distinguished from its adulterants obviously. Therefore, the psbA-trnH sequence as a barcode of the pteridophyte, can accurately and stably distinguish Pyrrosiae Folium from its adulterants.

[Identification of plantaginis semen based on ITS2 and psbA-trnH sequences].

In order to evaluate the efficiency of ITS2 and psbA-trnH sequences used as DNA barcodes to distinguish Plantaginis Semen from its adulterants, we collected 71 samples of Plantaginis Semen and its adulterants. The ITS2 and psbA-trnH sequences were aligned through Clustal W, and the genetic distances were calculated by kimura 2-parameter (K2P) model and the Neighbor-Joining (NJ) phylogenetic trees were constructed using MEGA 5.1. The results indicated that the ITS2 sequence lengths of Plantago asiatica and P. depressa were 199 bp and 200 bp, respectively; the maximum intra-specific K2P distance were lower than the minimum inter-specific K2P distance; the NJ tree based on ITS2 sequence indicated that Plantaginis Semen and its adulterants could be distinguished clearly. The sequence lengths of psbA-trnH of both P. asiatica and P. depressa were 340 bp; the maximum intra-specific K2P distances were lower than the minimum inter-specific K2P distance; the NJ tree based on psbA-trnH sequence showed that Plantaginis Semen can be distinguished clearly from its adulterants except for P. major. Therefore, ITS2 sequences can be used as an ideal DNA barcode to distinguish Plantaginis Semen from its adulterants.

[Study on extraction and purification technology of Hubei ophiopogon saponins].

OBJECTIVE: To explore the extraction and purification technology of total saponins from the effective parts of Liriope spicata. METHODS: Orthogonal design was used. Macroporous resin was selected to separate and purify total saponin from the effective parts of Liriope spicata. The process validation was conducted. The total saponins was determined by Ultraviolet Spectrophotometry. RESULTS: The optimal extraction conditions were as follows: 10 times the amount of ethanol (70%) for each occasion and hot reflux (3 x 2 h). Total saponins was purified by D101 macroporous resin. The concentration of eluting ethanol was 50% - 70%. Ethanol (70%) was selected as the best eluent. The result of process validation was consistent with the study. CONCLUSION: The process is simple and stable enough to significantly improve the extraction rate of the effective parts. The study can provide reference for the research and production of effective parts of traditional Chinese medicine such as Liriope spicata.

The Use of PET Imaging for Prognostic Integrin α2ß1 Phenotyping to Detect Non-Small Cell Lung Cancer and Monitor Drug Resistance Responses.

PURPOSE: Growing evidence has demonstrated that aberrant expression of integrin α2ß1 might contribute to the invasion, metastasis and drug resistance of non-small cell lung cancer (NSCLC). Thus, the integrin α2ß1 targeting 68Ga-DOTA-A2B1 tracer was validated in NSCLC in contrast to accumulation of the clinically used 18F-FDG PET tracer to see if 68Ga-DOTA-A2B1-PET imaging can offer a valuable and critical diagnostic imaging criterion for the identification of phenotypes of aggressive lung cancer. METHODS: To verify the prognostic value of integrin α2ß1, several quantitative and functional in vitro assays were validated in different NSCLC cell lines (CL1-0, CL1-5, A549 and selected A549++ cells). Positron emission tomography (PET) imaging studies using both standard 18F-FDG and a newly developed 68Ga-labeled integrin α2ß1 (68Ga-DOTA-A2B1) tracer were sequentially performed on mice with lung tumor xenografts in different anatomic locations (subcutaneous, orthotopic and osseous) to validate the targeting capability of the 68Ga-DOTA-A2B1 tracers. Treatment responses were monitored by injecting animals with metastatic bone tumors with 5 mg/kg doxorubicin. All in vivo treatment responses in each treatment subgroup were monitored with a PET imaging system to evaluate the up-regulation of integrin expression at the earliest stage of treatment (6 h). RESULTS: The PET and computed tomography (CT) images from NSCLC xenograft animals unambiguously demonstrated accumulation of the integrin tracer 68Ga-DOTA-A2B1 in the tumor lesions at all locations. The average tumor uptake and tumor-to-normal (T/N) ratio were 2.51 ± 0.56 %ID/g and T/N = 2.82, 3.40 ± 0.42 %ID/g and T/N = 1.52, and 1.58 ± 0.108 %ID/g and T/N = 2.31 in subcutaneous, orthotopic and osseous tumors, respectively (n = 5; p < 0.05). The xenograft tumors were all clearly visible. In contrast, the accumulation of 18F-FDG reached 3.6 ± 0.76 %ID/g, 1.39 ± 0.075 %ID/g and 3.78 ± 0.73 %ID/g in subcutaneous, orthotopic and osseous tumors, respectively (n = 5; p < 0.05). However, due to the high background uptake by normal tissue, the T/N values were less than or close to 1, making the tumors almost indistinguishable in the PET imaging analysis. Furthermore, 68Ga-DOTA-A2B1-PET imaging of the treated osseous tumor model demonstrated more than 19% tracer uptake in A549 lesions (1.72 ± 0.95 %ID/g vs. pretreatment 1.44 ± 0.12 %ID/g,p = 0. 015) 6 h post-treatment with doxorubicin. The elevated intensity of tracer uptake was in accordance with the results of in vitroWestern blot and ex vivo integrin staining, demonstrating elevated integrin α2ß1 expression. CONCLUSION: In this study, integrin α2ß1 was identified as a biomarker of aggressive malignant NSCLC. Thus, efforts should be devoted to validating integrin α2ß1 as a potential target for non-invasive diagnosis and as a predictive marker for monitoring treatment responses using a preclinical PET imaging system.

Mass-size distributions of particulate sulfate, nitrate, and ammonium in a particulate matter nonattainment region in southern Taiwan.

Concentrations and distributions of three major water-soluble ion species (sulfate, nitrate, and ammonium) contained in ambient particles were measured at three sampling sites in the Kao-ping ambient air quality basin, Taiwan. Ambient particulate matter (PM) samples were collected in a Micro-orifice Uniform Deposit Impactor from February to July 2003 and were analyzed for water-soluble ion species with an ion chromatograph. The PM1/ PM2.5 and PM1/PM10 concentration ratios at the emission source site were 0.73 and 0.53 and were higher than those (0.68 and 0.48) at the background site because there are more combustion sources (i.e., industrial boilers and traffic) around the emission source site. Mass-size distributions of PM NO3- were found in both the fine and coarse modes. SO4(2-)and NH4+ were found in the fine particle mode (PM2.5), with significant fractions of submicron particles (PM1). The source site had higher PM1/PM10(79, 42, and 90%) and PM1/PM2.5 concentration ratios (90, 58, and 93%) for the three major inorganic secondary aerosol components (SO4(2-), NO3-, and NH4+) than the receptor site (65, 27, and 65% for PM1/PM10, 69, 51, and 70% for PM1/PM2.5. Results obtained in this study indicate that the PM1 (submicron aerosol particles) fraction plays an important role in the ambient atmosphere at both emission source and receptor sites. Further studies regarding the origin and formation of ambient secondary aerosols are planned.

A rat model of thrombosis in common carotid artery induced by implantable wireless light-emitting diode device.

This work has developed a novel approach to form common carotid artery (CCA) thrombus in rats with a wireless implantable light-emitting diode (LED) device. The device mainly consists of an external controller and an internal LED assembly. The controller was responsible for wirelessly transmitting electrical power. The internal LED assembly served as an implant to receive the power and irradiate light on CCA. The thrombus formation was identified with animal sonography, 7 T magnetic resonance imaging, and histopathologic examination. The present study showed that a LED assembly implanted on the outer surface of CCA could induce acute occlusion with single irradiation with 6 mW/cm(2) LED for 4 h. If intermittent irradiation with 4.3-4.5 mW/cm(2) LED for 2 h was shut off for 30 min, then irradiation for another 2 h was applied; the thrombus was observed to grow gradually and was totally occluded at 7 days. Compared with the contralateral CCA without LED irradiation, the arterial endothelium in the LED-irradiated artery was discontinued. Our study has shown that, by adjusting the duration of irradiation and the power intensity of LED, it is possible to produce acute occlusion and progressive thrombosis, which can be used as an animal model for antithrombotic drug development.

Differences between chondrocytes and bone marrow-derived chondrogenic cells.

Implantation of autologous chondrogenic cells has become the mainstay strategy for repairing articular cartilage defects. Because the availability of autologous chondrocytes is extremely limited, many recent studies have used artificially induced mesenchymal stem cells (iMSCs) as substitutes for chondrocytes. In this study, we analyzed the differences between the iMSCs and chondrocytes, including their molecular biological and mechanical properties. Human bone marrow-derived MSCs were collected and induced to exhibit the chondrogenic phenotype by culturing the pelleted MSCs in a chemically defined culture medium supplemented with transforming growth factor-beta 1. The molecular biological properties of iMSCs and culture-expanded chondrocytes, including their mRNA profiles and surface proteomics, were analyzed using reverse transcription-polymerase chain reaction (RT-PCR) and flow cytometry, respectively. The biomechanical properties of iMSCs and native chondrocytes, including their surface topology, adhesion force, and membrane stiffness, were analyzed using atomic force microscopy (AFM). Both iMSCs and chondrocytes presented type II collagen and glycosaminoglycan, whereas only chondrocytes presented type X collagen. Flow cytometric assays showed that the expression of type II collagen and integrin-1 was higher in the chondrocytes than in the iMSCs. AFM revealed that the MSCs, iMSCs, and chondrocytes greatly differed in their shape. The MSCs were spindle shaped and easily distinguishable from the spherical chondrocytes. The iMSCs appeared round and resembled the spherical chondrocytes; however, the iMSCs were flatter with a central hump of condensed mass and a surrounding thin and broad pleat. The mean adhesion force and mean surface stiffness were significantly lower for the iMSCs (4.54 nN and 0.109 N/m, respectively) than for the chondrocytes (6.86 nN and 0.134 N/m, respectively). To conclude, although the iMSCs exhibited the chondrogenic phenotype, they differed from the chondrocytes in their molecular biological and mechanical properties.

Significance of the pH-induced conformational changes in the structure of C-reactive protein measured by dual polarization interferometry.

Emerging evidence indicates that the conformation of C-reactive protein (CRP) plays important roles in human inflammation and cardiovascular disease (CVD). The different conformations in the structure of CRP under different pH conditions remain an important issue to be investigated for explaining various functions of CRP under certain physiologic and pathologic conditions. We directly measured the pH-induced conformational changes in the structure of CRP by dual polarization interferometry (DPI). The CRP was attached to an aldehyde-functionalized DPI sensor chip at a concentration of 50 µg/ml, and attained 2.019 ng/mm2 to form a surface coverage with a 1.71×10(-14) mol/mm2 CRP monolayer. A pentagonal structure with an average monolayer thickness value of 5.70±0.12nm and a layer density of 0.374±0.058 g/cm2 was obtained at pH 7.0. Moreover, the DPI biosensor signals directly reflected the considerable structural parameters and phenomena of conformational changes of CRP in a pH range of 2.0-10.0. The results obtained showed that the pentameric structure of CRP might dissociated into monomers or monomer aggregates as the pH shifts toward both acidic and alkaline conditions, but only partial rearrangements of CRP subunits might occur at extremely acidic physiological conditions. Considering the proinflammatory effect and subclinical chronic inflammation, pH-induced conformational changes in the structure of CRP between monomeric and pentameric formations may strongly relate to vascular atherosclerosis and subsequent CVD.