The complete plastomes of thirteen Libanotis (Apiaceae, Apioideae) plants: comparative and phylogenetic analyses provide insights into the plastome evolution and taxonomy of Libanotis.

BACKGROUND: The genus Libanotis Haller ex Zinn, nom. cons., a contentious member of Apiaceae, encompasses numerous economically and medicinally significant plants, comprising approximately 30 species distributed across Eurasia. Despite many previous taxonomic insights into it, phylogenetic studies of the genus are still lacking. And the establishment of a robust phylogenetic framework remains elusive, impeding advancements and revisions in the taxonomic system for this genus. Plastomes with greater variability in their genetic characteristics hold promise for building a more robust Libanotis phylogeny. RESULTS: During our research, we sequenced, assembled, and annotated complete plastomes for twelve Libanotis species belong to three sections and two closely related taxa. We conducted a comprehensive comparative analysis through totally thirteen Libanotis plastomes for the genus, including an additional plastome that had been published. Our results suggested that Libanotis plastome was highly conserved between different subclades, while the coding regions were more conserved than the non-coding regions, and the IR regions were more conserved than the single copy regions. Nevertheless, eight mutation hotspot regions were identified among plastomes, which can be considered as candidate DNA barcodes for accurate species identification in Libanotis. The phylogenetic analyses generated a robustly framework for Libanotis and revealed that Libanotis was not a monophyletic group and their all three sections were polygenetic. Libanotis schrenkiana was sister to L. sibirica, type species of this genus, but the remainders scattered within Selineae. CONCLUSION: The plastomes of Libanotis exhibited a high degree of conservation and was effective in enhancing the support and resolution of phylogenetic analyses within this genus. Based on evidence from both phylogeny and morphology, we propose the recognition of "Libanotis sensu stricto" and provide taxonomic recommendations for other taxa that previously belonged to Libanotis. In conclusion, our study not only revealed the phylogenetic position and plastid evolution of Libanotis, but also provided new insights into the phylogeny of the family Apiaceae and phylogenetic relationships within the tribe Selineae.

Phylogeny and diversification of genus Sanicula L. (Apiaceae): novel insights from plastid phylogenomic analyses.

BACKGROUND: The genus Sanicula L. is a unique perennial herb that holds important medicinal values. Although the previous studies on Sanicula provided us with a good research basis, its taxonomic system and interspecific relationships have not been satisfactorily resolved, especially for those endemic to China. Moreover, the evolutionary history of this genus also remains inadequately understood. The plastid genomes possessing highly conserved structure and limited evolutionary rate have proved to be an effective tool for studying plant phylogeny and evolution. RESULTS: In the current study, we newly sequenced and assembled fifteen Sanicula complete plastomes. Combined with two previously reported plastomes, we performed comprehensively plastid phylogenomics analyses to gain novel insights into the evolutionary history of this genus. The comparative results indicated that the seventeen plastomes exhibited a high degree of conservation and similarity in terms of their structure, size, GC content, gene order, IR borders, codon bias patterns and SSRs profiles. Such as all of them displayed a typical quadripartite structure, including a large single copy region (LSC: 85,074-86,197 bp), a small single copy region (SSC: 17,047-17,132 bp) separated by a pair of inverted repeat regions (IRs: 26,176-26,334 bp). And the seventeen plastomes had similar IR boundaries and the adjacent genes were identical. The rps19 gene was located at the junction of the LSC/IRa, the IRa/SSC junction region was located between the trnN gene and ndhF gene, the ycf1 gene appeared in the SSC/IRb junction and the IRb/LSC boundary was located between rpl12 gene and trnH gene. Twelve specific mutation hotspots (atpF, cemA, accD, rpl22, rbcL, matK, ycf1, trnH-psbA, ycf4-cemA, rbcL-accD, trnE-trnT and trnG-trnR) were identified that can serve as potential DNA barcodes for species identification within the genus Sanicula. Furthermore, the plastomes data and Internal Transcribed Spacer (ITS) sequences were performed to reconstruct the phylogeny of Sanicula. Although the tree topologies of them were incongruent, both provided strong evidence supporting the monophyly of Saniculoideae and Apioideae. In addition, the sister groups between Saniculoideae and Apioideae were strongly suggested. The Sanicula species involved in this study were clustered into a clade, and the Eryngium species were also clustered together. However, it was clearly observed that the sections of Sanicula involved in the current study were not respectively recovered as monophyletic group. Molecular dating analysis explored that the origin of this genus was occurred during the late Eocene period, approximately 37.84 Ma (95% HPD: 20.33-52.21 Ma) years ago and the diversification of the genus was occurred in early Miocene 18.38 Ma (95% HPD: 10.68-25.28 Ma). CONCLUSION: The plastome-based tree and ITS-based tree generated incongruences, which may be attributed to the event of hybridization/introgression, incomplete lineage sorting (ILS) and chloroplast capture. Our study highlighted the power of plastome data to significantly improve the phylogenetic supports and resolutions, and to efficiently explore the evolutionary history of this genus. Molecular dating analysis explored that the diversification of the genus occurred in the early Miocene, which was largely influenced by the prevalence of the East Asian monsoon and the uplift of the Hengduan Mountains (HDM). In summary, our study provides novel insights into the plastome evolution, phylogenetic relationships, taxonomic framework and evolution of genus Sanicula.

The plastid genome of twenty-two species from Ferula, Talassia, and Soranthus: comparative analysis, phylogenetic implications, and adaptive evolution.

BACKGROUND: The Ferula genus encompasses 180-185 species and is one of the largest genera in Apiaceae, with many of Ferula species possessing important medical value. The previous studies provided more information for Ferula, but its infrageneric relationships are still confusing. In addition, its genetic basis of its adaptive evolution remains poorly understood. Plastid genomes with more variable sites have the potential to reconstruct robust phylogeny in plants and investigate the adaptive evolution of plants. Although chloroplast genomes have been reported within the Ferula genus, few studies have been conducted using chloroplast genomes, especially for endemic species in China. RESULTS: Comprehensively comparative analyses of 22 newly sequenced and assembled plastomes indicated that these plastomes had highly conserved genome structure, gene number, codon usage, and repeats type and distribution, but varied in plastomes size, GC content, and the SC/IR boundaries. Thirteen mutation hotspot regions were detected and they would serve as the promising DNA barcodes candidates for species identification in Ferula and related genera. Phylogenomic analyses with high supports and resolutions showed that Talassia transiliensis and Soranthus meyeri were nested in the Ferula genus, and thus they should be transferred into the Ferula genus. Our phylogenies also indicated the monophyly of subgenera Sinoferula and subgenera Narthex in Ferula genus. Twelve genes with significant posterior probabilities for codon sites were identified in the positively selective analysis, and their function may relate to the photosystem II, ATP subunit, and NADH dehydrogenase. Most of them might play an important role to help Ferula species adapt to high-temperatures, strong-light, and drought habitats. CONCLUSION: Plastome data is powerful and efficient to improve the support and resolution of the complicated Ferula phylogeny. Twelve genes with significant posterior probabilities for codon sites were helpful for Ferula to adapt to the harsh environment. Overall, our study supplies a new perspective for comprehending the phylogeny and evolution of Ferula.

Zerovalent Iron/Cu Combined Degradation of Halogenated Disinfection Byproducts and Quantitative Structure-Activity Relationship Modeling.

Previous studies have reported that zerovalent iron (ZVI) can reduce several aliphatic groups of disinfection byproducts (DBPs) (e.g., haloacetic acids and haloacetamides) effectively, and the removal efficiency can be significantly improved by metallic copper. Information regarding ZVI/Cu combined degradation of different types of halogenated DBPs can help understand the fate of overall DBPs in drinking water distribution and storage systems consisting of unlined cast iron/copper pipes and related potential control strategies. In this study, we found that, besides aliphatic DBPs, many groups of new emerging aromatic DBPs formed in chlorinated and chloraminated drinking water can be effectively degraded by ZVI/Cu; meanwhile, total organic halogen and total ion intensity were reduced significantly after treatment. Moreover, a robust quantitative structure-activity relationship model was developed and validated based on the ZVI/Cu combined degradation rate constants of 14 typical aromatic DBPs; it can predict the degradation rate constants of other aromatic DBPs for screening and comparative purposes, and the optimized descriptors indicate that DBPs possessing a lower value of the lowest unoccupied molecular orbital energy and a higher value of dipole moment tend to present higher degradation rate constants. In addition, toxicity data of 47 DBPs (belonging to 18 groups) were predicted by two previously established toxicity models, demonstrating that, although most DBPs exhibit higher toxicity than their dehalogenated products, some DBPs show lower toxicity than their lowly halogenated analogs.

The complete plastomes of seven Peucedanum plants: comparative and phylogenetic analyses for the Peucedanum genus.

BACKGROUND: The Peucedanum genus is the backbone member of Apiaceae, with many economically and medically important plants. Although the previous studies on Peucedanum provide us with a good research basis, there are still unclear phylogenetic relationships and many taxonomic problems in Peucedanum, and a robust phylogenetic framework of this genus still has not been obtained, which severely hampers the improvement and revision of taxonomic system for this genus. The plastid genomes possessing more variable characters have potential for reconstructing a robust phylogeny in plants. RESULTS: In the current study, we newly sequenced and assembled seven Peucedanum plastid genomes. Together with five previously published plastid genomes of Peucedanum, we performed a comprehensively comparative analyses for this genus. Twelve Peucedanum plastomes were similar in terms of genome structure, codon bias, RNA editing sites, and SSRs, but varied in genome size, gene content and arrangement, and border of SC/IR. Fifteen mutation hotspot regions were identified among plastid genomes that can serve as candidate DNA barcodes for species identification in Peucedanum. Our phylogenetic analyses based on plastid genomes generated a phylogeny with high supports and resolutions for Peucedanum that robustly supported the non-monophyly of genus Peucedanum. CONCLUSION: The plastid genomes of Peucedanum showed both conservation and diversity. The plastid genome data were efficient and powerful for improving the supports and resolutions of phylogeny for the complex Peucedanum genus. In summary, our study provides new sights into the plastid genome evolution, taxonomy, and phylogeny for Peucedanum species.

The phylogeny of Seseli (Apiaceae, Apioideae): insights from molecular and morphological data.

BACKGROUND: The genus Seseli L., which consists of 125-140 species distributed in the Old World from western Europe and northwestern Africa to China and Japan, is one of the largest and most taxonomically difficult genera of Apiaceae Lindl. Although several previous studies have been conducted on Seseli based on limited morphological characteristics and molecular fragments, a robust and comprehensive phylogeny of Seseli remains elusive. Plastomes provide abundant genetic information and have been widely used in studying plant phylogeny and evolution. Consequently, we newly generated the complete plastomes of eleven Seseli taxa. We combined plastome data and morphological characteristics to investigate the phylogeny of Seseli. RESULTS: In our study, we observed that the genome length, gene numbers, IR/SC borders, and repeat composition of the eleven Seseli plastomes were variable. Several appropriate mutation hotspot regions may be developed as candidate DNA barcodes for evolution, phylogeny, and species identification of Seseli. The phylogenetic results identified that Seseli was not a monophyletic group. Moreover, the eleven newly sequenced Seseli taxa did not cluster with S. tortuosum (the type species of Seseli, belonging to the tribe Selineae), where S. delavayi clustered with Eriocycla belonging to the tribe Echinophoreae and the other ten belonged to Selineae. The comparative plastome and morphological characteristics analyses confirmed the reliability of the phylogenetic analyses and implied the complex evolution of Seseli. CONCLUSION: Combining molecular and morphological data is efficient and useful for studying the phylogeny of Seseli. We suggest that "a narrow sense" of Seseli will be meaningful for further study and the current taxonomic system of Seseli needs to be revised. In summary, our study can provide new insights into the phylogenetic relationships and taxonomic framework of Seseli.

Recent Advancement of the Current Aspects of g-C3 N4 for its Photocatalytic Applications in Sustainable Energy System.

Being one of the foremost enticing and intriguing innovations, heterogeneous photocatalysis has also been used to effectively gather, transform, and conserve sustainable sun's radiation for the production of efficient and clean fossil energy as well as a wide range of ecological implications. The generation of solar fuel-based water splitting and CO2 photoreduction is excellent for generating alternative resources and reducing global warming. Developing an inexpensive photocatalyst can effectively split water into hydrogen (H2 ), oxygen (O2 ) sources, and carbon dioxide (CO2 ) into fuel sources, which is a crucial problem in photocatalysis. The metal-free g-C3 N4 photocatalyst has a high solar fuel generation potential. This review covers the most recent advancements in g-C3 N4 preparation, including innovative design concepts and new synthesis methods, and novel ideas for expanding the light absorption of pure g-C3 N4 for photocatalytic application. Similarly, the main issue concerning research and prospects in photocatalysts based g-C3 N4 was also discussed. The current dissertation provides an overview of comprehensive understanding of the exploitation of the extraordinary systemic and characteristics, as well as the fabrication processes and uses of g-C3 N4 .

The complete plastomes of two flowering epiparasites (Phacellaria glomerata and P. compressa): Gene content, organization, and plastome degradation.

A plant parasite obligately parasitizing another plant parasite is referred to as epiparasite, which is extremely rare in angiosperms, and their complete plastome sequences have not been characterized to date. In this study, the complete plastomes of two flowering epiparasites: Phacellaria compressa and P. glomerata (Amphorogynaceae, Santalales) were sequenced. The plastomes of both species are of similar size, structure, gene content, and arrangement of genes to other hemiparasites in Santalales. Their plastomes were characterized by the functional loss of plastid-encoded NAD(P)H-dehydrogenase and infA genes, which strongly coincides with the general pattern of plastome degradation observed in Santalales hemiparasites. Our study demonstrates that the relatively higher level of nutritional reliance on the host plants and the reduced vegetative bodies of P. compressa and P. glomerata do not appear to cause any unique plastome degradation compared with their closely related hemiparasites.

Plastid Phylogenomics Provide Evidence to Accept Two New Members of Ligusticopsis (Apiaceae, Angiosperms).

Peucedanum nanum and P. violaceum are recognized as members of the genus Peucedanum because of their dorsally compressed mericarps with slightly prominent dorsal ribs and narrowly winged lateral ribs. However, these species are not similar to other Peucedanum taxa but resemble Ligusticopsis in overall morphology. To check the taxonomic positions of P. nanum and P. violaceum, we sequenced their complete plastid genome (plastome) sequences and, together with eleven previously published Ligusticopsis plastomes, performed comprehensively comparative analyses. The thirteen plastomes were highly conserved and similar in structure, size, GC content, gene content and order, IR borders, and the patterns of codon bias, RNA editing, and simple sequence repeats (SSRs). Nevertheless, twelve mutation hotspots (matK, ndhC, rps15, rps8, ycf2, ccsA-ndhD, petN-psbM, psbA-trnK, rps2-rpoC2, rps4-trnT, trnH-psbA, and ycf2-trnL) were selected. Moreover, both the phylogenetic analyses based on plastomes and on nuclear ribosomal DNA internal transcribed spacer (ITS) sequences robustly supported that P. nanum and P. violaceum nested in Ligusticopsis, and this was further confirmed by the morphological evidence. Hence, transferring P. nanum and P. violaceum into Ligusticopsis genus is reasonable and convincing, and two new combinations are presented.

Highly degenerate plastomes in two hemiparasitic dwarf mistletoes: Arceuthobium chinense and A. pini (Viscaceae).

MAIN CONCLUSION: The leafless and endophytic habitat may significantly relax the selection pressure on photosynthesis, and plastid transcription and translation, causing the loss/pseudogenization of several essential plastid-encoding genes in dwarf mistletoes. Dwarf mistletoes (Arceuthobium spp., Viscaceae) are the most destructive plant parasites to numerous conifer species worldwide. In this study, the plastid genomes (plastomes) of Arceuthobium chinense Lecomte and A. pini Hawksworth and Wiens were sequenced and characterized. Although dwarf mistletoes are hemiparasites capable of photosynthesis, their plastomes were highly degenerated, as indicated by the smallest plastome size, the lowest GC content, and relatively very few intact genes among the Santalales hemiparasites. Unexpectedly, several essential housekeeping genes (rpoA, rpoB, rpoC1, and rpoC2) and some core photosynthetic genes (psbZ and petL), as well as the rpl33 gene, that is indispensable for plants under stress conditions, were deleted or pseudogenized in the Arceuthobium plastomes. Our data suggest that the leafless and endophytic habit, which heavily relies on the coniferous hosts for nutrients and carbon requirement, may largely relax the selection pressure on photosynthesis, as well as plastid transcription and translation, thus resulting in the loss/pseudogenization of such essential plastid-encoding genes in dwarf mistletoes. Therefore, the higher level of plastome degradation in Arceuthobium species than other Santalales hemiparasites is likely correlated with the evolution of leafless and endophytic habit. A higher degree of plastome degradation in Arceuthobium. These findings provide new insights into the plastome degeneration associated with parasitism in Santalales and deepen our understanding of the biology of dwarf mistletoes.

Plastome phylogenomics of Cephalotaxus (Cephalotaxaceae) and allied genera.

BACKGROUND AND AIMS: Cephalotaxus is a paleo-endemic genus in East Asia that consists of about 7-9 conifer species. Despite its great economic and ecological importance, the relationships between Cephalotaxus and related genera, as well as the interspecific relationships within Cephalotaxus, have long been controversial, resulting in contrasting taxonomic proposals in delimitation of Cephalotaxaceae and Taxaceae. Based on plastome data, this study aims to reconstruct a robust phylogeny to infer the systematic placement and the evolutionary history of Cephalotaxus. METHODS: A total of 11 plastomes, representing all species currently recognized in Cephalotaxus and two Torreya species, were sequenced and assembled. Combining these with previously published plastomes, we reconstructed a phylogeny of Cephalotaxaceae and Taxaceae with nearly full taxonomic sampling. Under a phylogenetic framework and molecular dating, the diversification history of Cephalotaxus and allied genera was explored. KEY RESULTS: Phylogenetic analyses of 81 plastid protein-coding genes recovered robust relationships between Cephalotaxus and related genera, as well as providing a well-supported resolution of interspecific relationships within Cephalotaxus, Taxus, Torreya and Amentotaxus. Divergence time estimation indicated that most extant species of these genera are relatively young, although fossil and other molecular evidence consistently show that these genera are ancient plant lineages. CONCLUSIONS: Our results justify the taxonomic proposal that recognizes Cephalotaxaceae as a monotypic family, and contribute to a clear-cut delineation between Cephalotaxaceae and Taxaceae. Given that extant species of Cephalotaxus are derived from recent divergence events associated with the establishment of monsoonal climates in East Asia and Pleistocene climatic fluctuations, they are not evolutionary relics.

Phylogenetically divergent bacteria consortium from neutral activated sludge showed heightened potential on bioleaching spent lithium-ion batteries.

Recycling of spent lithium-ion batteries (LIBs) has become a global issue because of the potential environment risks raised by spent LIBs as well as high valuable metal content remaining in them. Although bioleaching is an environmentally friendly method to recover metals from spent LIBs, the commonly utilized bioleaching bacterial consortia or strains enriched/isolated from acidic environments cannot be applied at large scales owing to their long leaching cycle and poor tolerance to organic compounds. Here, two bioleaching consortia were enriched in 60 days from neutral activated sludge and were identified phylogenetically divergent from the documented bioleaching bacteria. The results showed that the novel consortia shortened the leaching cycle almost by half when compared to the previous reported consortia or strains, of which one consortium dominated by Acidithiobacillus ferrooxidans displayed high bioleaching efficiency on LiMn2O4, as 69.46% lithium (Li) and 67.60% manganese (Mn) were leached out in seven days. This consortium was further domesticated using cathodic materials for 100 days and proved consisted of three mixotrophs and two chemoautotrophs, three of which were novel species from the genera Sulfobacillus and Leptospirillum. More genes coding for proteins that utilize organic compounds were annotated in the metagenomic assembled genomes (MAGs) than previously reported. A mutualistic relationship between mixotrophs and chemoautotrophs was suggested to help the consortium surviving under either organic- rich or shortage environments. The results discovered that novel bioleaching bacteria with shorter leaching cycle and higher tolerance to organics could be enriched from non-acidic environments, which showed high potential for the metal recovering from spent LIBs or other organic-rich environments.

A Simple One-Step Modification of Shrimp Shell for the Efficient Adsorption and Desorption of Copper Ions.

Removing toxic heavy metal species from aqueous solutions is a point of concern in our society. In this paper, a promising biomass adsorbent, the modified waste shrimp shell (MS), for Cu (II) removal was successfully prepared using a facile and simple one-step modification, making it possible to achieve high-efficiency recycling of the waste NaOH solution as the modification agent. The outcome shows that with the continuous increase in pH, temperature and ion concentration, the adsorption effect of MS on Cu (II) can also be continuously improved. Adsorption isotherm and adsorption kinetics were fitted with the Langmuir isotherm model and the pseudo-second-order model, respectively, and the maximum adsorption capacity of Cu (II) as obtained from the Langmuir isotherm model fitting reached 1.04 mmol/g. The systematic desorption results indicated that the desorption rate of Cu (II) in the MS could reach 100% within 6 min, where HNO3 is used as the desorption agent. Moreover, experiments have proven that after five successive recycles of NaOH as a modifier, the adsorption capacity of MS on Cu (II) was efficient and stable, maintaining tendency in 0.83-0.85 mmol/g, which shows that waste NaOH solution can be used as a modification agent in the preparation of waste shrimp shell adsorbent, such as waste NaOH solution produced in industrial production, thereby making it possible to turn waste into renewable resources and providing a new way to recycle resources.

Enhanced Conductivity and Antibacterial Behavior of Cotton via the Electroless Deposition of Silver.

In this study, the surface-initiated atom transfer radical polymerization (SI-ATRP) technique and electroless deposition of silver (Ag) were used to prepare a novel multi-functional cotton (Cotton-Ag), possessing both conductive and antibacterial behaviors. It was found that the optimal electroless deposition time was 20 min for a weight gain of 40.4%. The physical and chemical properties of Cotton-Ag were investigated. It was found that Cotton-Ag was conductive and showed much lower electrical resistance, compared to the pristine cotton. The antibacterial properties of Cotton-Ag were also explored, and high antibacterial activity against both Escherichia coli and Staphylococcus aureus was observed.

Recent Advances in Microfluidic Platforms Applied in Cancer Metastasis: Circulating Tumor Cells' (CTCs) Isolation and Tumor-On-A-Chip.

Cancer remains the leading cause of death worldwide despite the enormous efforts that are made in the development of cancer biology and anticancer therapeutic treatment. Furthermore, recent studies in oncology have focused on the complex cancer metastatic process as metastatic disease contributes to more than 90% of tumor-related death. In the metastatic process, isolation and analysis of circulating tumor cells (CTCs) play a vital role in diagnosis and prognosis of cancer patients at an early stage. To obtain relevant information on cancer metastasis and progression from CTCs, reliable approaches are required for CTC detection and isolation. Additionally, experimental platforms mimicking the tumor microenvironment in vitro give a better understanding of the metastatic microenvironment and antimetastatic drugs' screening. With the advancement of microfabrication and rapid prototyping, microfluidic techniques are now increasingly being exploited to study cancer metastasis as they allow precise control of fluids in small volume and rapid sample processing at relatively low cost and with high sensitivity. Recent advancements in microfluidic platforms utilized in various methods for CTCs' isolation and tumor models recapitulating the metastatic microenvironment (tumor-on-a-chip) are comprehensively reviewed. Future perspectives on microfluidics for cancer metastasis are proposed.

Equipment-free photothermal effect promoted self-healing and self-recovery of hydrogels.

The self-healing and self-recovery of the hydrogel materials can be promoted under sunlight without the assistance of electrical equipment by adding a light-to-heat conversion substance during the synthetic process, which will greatly extend the service life of the hydrogels even for the elastomer materials in the off-grid areas.

Characterizing community dynamics and exploring bacterial assemblages in two activated sludge systems.

Bacterial communities in the activated sludge (AS) determine the wastewater treatment performance in the municipal wastewater treatment plants (WWTPs). Aiming at identifying the affecting factors and the variation patterns of the bacterial assemblages in AS, a 2-year time-series AS samples were collected from two separated WWTPs and metagenomic sequencing was conducted. Obvious seasonal shift and succession of the bacterial community were observed in both WWTPs on the genus and species levels, especially for the persistent taxa, implying that temperature was a decisive factor for maintaining bacterial assemblage patterns in long-term period. Taxa abundance distribution (TAD) concerning occurrence frequency and average abundance were found fitting for exponential formulations, and the approximately equal total abundance of persistent taxa suggested that stable and high abundance (~ 90%) of core functional bacterial groups would help to maintain wastewater treatment performance. Drastic changes of environmental factors were found causing temporally significant bacterial structure variation, while the innate correlations between bacterial species could recover the community gradually and maintain relative stability of the AS system. Delayed correlations between environmental factors and abundant (persistent or intermittent) bacterial species were observed widely, while synchronous biotic interactions were identified more frequently. Besides, bacterial species with similar functions were prone to cluster together and shared the same seasonal variation pattern, implicating that the cooperation of functional correlated taxa played the most dominant role in shaping the bacterial assemblages. Furthermore, rare bacterial groups were to be explored for removing emerging pollutants with lower concentrations. The results of this study would assist dealing with operational defect and optimize the treatment system in WWTPs.

Plastome phylogenomics, biogeography, and clade diversification of Paris (Melanthiaceae).

BACKGROUND: Paris (Melanthiaceae) is an economically important but taxonomically difficult genus, which is unique in angiosperms because some species have extremely large nuclear genomes. Phylogenetic relationships within Paris have long been controversial. Based on complete plastomes and nuclear ribosomal DNA (nrDNA) sequences, this study aims to reconstruct a robust phylogenetic tree and explore historical biogeography and clade diversification in the genus. RESULTS: All 29 species currently recognized in Paris were sampled. Whole plastomes and nrDNA sequences were generated by the genome skimming approach. Phylogenetic relationships were reconstructed using the maximum likelihood and Bayesian inference methods. Based on the phylogenetic framework and molecular dating, biogeographic scenarios and historical diversification of Paris were explored. Significant conflicts between plastid and nuclear datasets were identified, and the plastome tree is highly congruent with past interpretations of the morphology. Ancestral area reconstruction indicated that Paris may have originated in northeastern Asia and northern China, and has experienced multiple dispersal and vicariance events during its diversification. The rate of clade diversification has sharply accelerated since the Miocene/Pliocene boundary. CONCLUSIONS: Our results provide important insights for clarifying some of the long-standing taxonomic debates in Paris. Cytonuclear discordance may have been caused by ancient and recent hybridizations in the genus. The climatic and geological changes since the late Miocene, such as the intensification of Asian monsoon and the rapid uplift of Qinghai-Tibet Plateau, as well as the climatic fluctuations during the Pleistocene, played essential roles in driving range expansion and radiative diversification in Paris. Our findings challenge the theoretical prediction that large genome sizes may limit speciation.

Chloroplast phylogenomic analysis provides insights into the evolution of the largest eukaryotic genome holder, Paris japonica (Melanthiaceae).

BACKGROUND: Robust phylogenies for species with giant genomes and closely related taxa can build evolutionary frameworks for investigating the origin and evolution of these genomic gigantisms. Paris japonica (Melanthiaceae) has the largest genome that has been confirmed in eukaryotes to date; however, its phylogenetic position remains unresolved. As a result, the evolutionary history of the genomic gigantisms in P. japonica remains poorly understood. RESULTS: We used next-generation sequencing to generate complete plastomes of P. japonica, P. verticillata, Trillium govanianum, Ypsilandra thibetica and Y. yunnanensis. Together with published plastomes, the infra-familial relationships in Melanthiaceae and infra-generic phylogeny in Paris were investigated, and their divergence times were calculated. The results indicated that the expansion of the ancestral genome of extant Paris and Trillium occurred approximately from 59.16 Mya to 38.21 Mya. The sister relationship between P. japonica and the section Euthyra was recovered, and they diverged around the transition of the Oligocene/Miocene (20 Mya), when the Japan Islands were separated from the continent of Asia. CONCLUSIONS: The genome size expansion in the most recent common ancestor for Paris and Trillium was most possibly a gradual process that lasted for approximately 20 million years. The divergence of P. japonica (section Kinugasa) and other taxa with thick rhizome may have been triggered by the isolation of the Japan Islands from the continent of Asia. This long-term separation, since the Oligocene/Miocene boundary, would have played an important role in the formation and evolution of the genomic gigantism in P. japonica. Moreover, our results support the taxonomic treatment of Paris as a genus rather than dividing it into three genera, but do not support the recognition of T. govanianum as the separate genus Trillidium.

Microbial characterization of heavy metal resistant bacterial strains isolated from an electroplating wastewater treatment plant.

Heavy metal pollution is one of the most widespread and complex environmental issues globally, posing a great threat to the ecosystem as well as human health. Bioremediation through heavy metal-resistant bacteria (HMRB) is currently the most promising technology to address this issue. To obtain HMRB to remediate heavy metal pollution potentially, 15 culturable HMRB strains were isolated from the sludge samples of an electroplating wastewater treatment plant (EWWTP), which belonged to the Bacillus, Shewanella, Lysinibacillus, and Acinetobacter genera. Their maximum tolerance concentrations to Cu2+, Ni2+, Mn2+, Co2+, and Cr2O72- were 40 mM, 10 mM, 200 mM, 40 mM, and 10 mM, respectively, and strain Mn1-4 showed much higher Mn2+ tolerance and removal effectiveness (3.355 g/L) than previously published reports. Moreover, multiple heavy metal-resistant genotypes and phenotypes were identified among these strains, of which strain Co1-1 carried the most of resistant gene sequences (10) and exhibited resistance to 7 categories of heavy metals, and the co-occurrence of heavy metal and antibiotic resistance were clearly observed in strain Ni1-3. In addition, flanked insert sequence (IS) elements on the heavy metal resistant genes (HMRGs) suggested that horizontal gene transfer (HGT) events may have resulted in multiple heavy metal resistance phenotypes and genotypes in these strains, and IS982 family transposase was presumed to result in the high Ni2+ tolerance in strain Ni1-3. This study expands our understanding of bacterial heavy metal resistance and provides promising candidates for heavy metal bioremediation.