Longer charged amino acids favor ß-strand formation in hairpin peptides.

Interactions between charged amino acids significantly influence the structure and function of proteins. The encoded charged amino acids Asp, Glu, Arg, and Lys have different number of hydrophobic methylenes linking the backbone to the charged functionality. It remains to be fully understood how does this difference in the number of methylenes affect protein structure stability. Protein secondary structures are the fundamental three-dimensional building blocks of protein structures. ß-Sheet structures are particularly interesting, because these structures have been associated with a number of protein misfolding diseases. Herein, we report the effect of charged amino acid side chain length at two ß-strand positions individually on the stability of a ß-hairpin. The charged amino acids include side chains with a carboxylate, an ammonium, or a guanidinium group. The experimental peptides, fully folded reference peptides, and fully unfolded reference peptides were synthesized by solid phase peptide synthesis and analyzed by 2D NMR methods including TOCSY, DQF-COSY, and ROESY. Sequence specific assignments were performed for all peptides. The chemical shift data were used to derive the fraction folded population and the folding free energy for the experimental peptides. Results showed that the fraction folded population increased with increasing charged amino acid side chain length. These results should be useful for developing functional peptides that adopt the ß-conformation.

Laser-Induced NanoKneading (LINK): Deformation of Patterned Azopolymer Nanopillar Arrays via Photo-Fluidization.

Ordered arrays of polymer nanostructures have been widely investigated because of their promising applications such as solar-cell devices, sensors, and supercapacitors. It remains a great challenge, however, to manipulate the shapes of individual nanostructures in arrays for tailoring specific properties. In this study, an effective strategy to prepare anisotropic polymer nanopillar arrays via photo-fluidization is presented. Azobenzene-containing polymers (azopolymers) are first infiltrated into the nanopores of ordered anodic aluminum oxide (AAO) templates. After the removal of the AAO templates using weak bases, azopolymer nanopillar arrays can be prepared. Upon exposure of linearly polarized lights, azobenzene groups in the azopolymers undergo trans-cis-trans photoisomerization, causing mass migration and elongation of the nanopillar along with the polarization directions. As a result, anisotropic nanopillar arrays can be fabricated, of which the deformation degrees are controlled by the illumination times. Furthermore, patterned nanopillar arrays can also be constructed with designed photomasks. This work presents a practical and versatile strategy to fabricate arrays of anisotropic nanostructures for future technical applications.

Curved block copolymer nanodiscs: structure transformations in cylindrical nanopores using the nonsolvent-assisted template wetting method.

In this work, we study the structure transformations of cylinder-forming polystyrene-block-polydimethylsiloxane (PS31k-b-PDMS14.5k) confined in cylindrical nanopores. PS-b-PDMS nanotubes, nanospheres, and curved nanodiscs are ingeniously prepared by a facile template wetting strategy using anodic aluminum oxide (AAO) templates. Quantitative analyses of the structure transformations from nanospheres to curved nanodiscs are also conducted, showing that the lengths of the curved nanodiscs can be controlled by adjusting the annealing temperature and time. Furthermore, the PDMS domains of the nanostructures can be selectively etched using HF solutions, generating porous PS nanostructures. This work not only offers versatile routes to prepare block copolymer nanostructures with controlled shapes but also provides a deeper understanding of the structure transformation of block copolymers in confined geometries.

Hierarchical Polymer Structures Using Templates and the Modified Breath Figure Method.

Hierarchical structures are commonly observed in nature and possess unique properties. The fabrication of hierarchical structures with well-controlled sizes in different length scales, however, is still a great challenge. To further understand the morphologies and properties of the hierarchical structures, here we present a novel strategy to prepare hierarchical polymer structures by combining the modified breath figure method and the template method. Poly(methyl methacrylate) (PMMA) honeycomb films with regular micropores are first prepared using the modified breath figure method by dipping PMMA films into mixtures of chloroform and methanol. The polymer chains on the honeycomb films are then annealed and wetted into the nanopores of anodic aluminum oxide templates via capillary forces, resulting in the formation of hierarchical polymer structures. The morphologies of the polymer structures, which can be controlled by the molecular weights of the polymers and the concentrations of the polymer solutions, are characterized by scanning electron microscopy. The surface wettabilities of the polymer structures are also examined by water contact angle measurements, and the hierarchical structures are observed to be more hydrophobic than the flat films and honeycomb films. This work not only provides a feasible approach to fabricate hierarchical polymer structures with controlled sizes but also gives a better understanding of the relationship between surface morphologies and properties.

Dewetting of polymer thin films on modified curved surfaces: preparation of polymer nanoparticles with asymmetric shapes by anodic aluminum oxide templates.

We study the dewetting behaviors of poly(methyl methacrylate) (PMMA) thin films coated in the cylindrical nanopores of anodic aluminum oxide (AAO) templates by thermal annealing. Self-assembled monolayers (SAMs) of n-octadecyltrichlorosilane (ODTS) are introduced to modify the pore surfaces of the AAO templates to induce the dewetting process. By using scanning electron microscopy (SEM), the dewetting-induced morphology transformation from the PMMA thin films to PMMA nanoparticles with asymmetric shapes can be observed. The sizes of the PMMA nanoparticles can be controlled by the original PMMA solution concentrations. The dewetting phenomena on the modified nanopores are explained by taking into account the excess intermolecular interaction free energy (ΔG). This work opens a new possibility for creating polymer nanoparticles with asymmetric shapes in confined geometries.

Fabrication of Electrospun Polymer Fibers with Nonspherical Cross-Sections Using a Nanopressing Technique.

The fabrication of electrospun polymer fibers is demonstrated with anisotropic cross-sections by applying a simple pressing method. Electrospun polystyrene or poly(methyl methacrylate) fibers are pressed by flat or patterned substrates while the samples are annealed at elevated temperatures. The shapes and morphologies of the pressed polymer fibers are controlled by the experimental conditions such as the pressing force, the pressing temperature, the pressing time, and the surface pattern of the substrate. At the same pressing force, the shape changes of the polymer fibers can be controlled by the pressing time. For shorter pressing times, the deformation process is dominated by the effect of pressing and fibers with barrel-shaped cross-sections can be generated. For longer pressing times, the effect of wetting becomes more important and fibers with dumbbell-shaped cross-sections can be obtained. Hierarchical polymer fibers with nanorods are fabricated by pressing the fibers with porous anodic aluminum oxide templates.

Ultrasensitive Room Temperature Infrared Photodetection Using a Narrow Bandgap Conjugated Polymer.

Photodetectors operating across the short-, mid-, and long-wave infrared (SWIR-LWIR, λ = 1-14 µm) underpin modern science, technology, and society in profound ways. Narrow bandgap semiconductors that form the basis for these devices require complex manufacturing, high costs, cooling, and lack compatibility with silicon electronics, attributes that remain prohibitive for their widespread usage and the development of emerging technologies. Here, a photoconductive detector, fabricated using a solution-processed narrow bandgap conjugated polymer is demonstrated that enables charge carrier generation in the infrared and ultrasensitive SWIR-LWIR photodetection at room temperature. Devices demonstrate an ultralow electronic noise that enables outstanding performance from a simple, monolithic device enabling a high detectivity (D*, the figure of merit for detector sensitivity) >2.44 × 109 Jones (cm Hz1/2 W-1 ) using the ultralow flux of a blackbody that mirrors the background emission of objects. These attributes, ease of fabrication, low dark current characteristics, and highly sensitive operation overcome major limitations inherent within modern narrow-bandgap semiconductors, demonstrate practical utility, and suggest that uncooled detectivities superior to many inorganic devices can be achieved at high operating temperatures.

Skeletal scintigraphy as an important complement for detecting bone metastasis from nasopharyngeal carcinoma.

Bone metastasis occurs frequently in patients with nasopharyngeal carcinoma (NPC). Although fluorine-18 fluorodeoxyglucose positron emission tomography with computed tomography (PET/CT) has been proven to be more sensitive at detecting bone metastases than Technetium-99m methylene diphosphonate skeletal scintigraphy in pretreatment patients with NPC in most clinical settings, there have been metastatic lesions that were positive on skeletal scintigraphy but negative on PET/CT scans. Herein, we report the case of a patient with stage IV NPC that manifested as multiple metabolically abnormal lesions on pretreatment skeletal scintigraphy and were considered malignant although they were negative on PET/CT examination. Follow-up evaluations with both skeletal scintigraphy and PET/CT scans as post-therapeutic imaging are also presented.

Magnetic Ordering in a High-Spin Donor-Acceptor Conjugated Polymer.

The development of open-shell organic molecules that magnetically order at room temperature,which can be practically applied, remains a grand challenge in chemistry, physics, and materials science. Despite the exploration of vast chemical space, design paradigms for organic paramagnetic centers generally result in unpaired electron spins that are unstable or isotropic. Here, a high-spin conjugated polymer is demonstrated, which is composed of alternating cyclopentadithiophene and benzo[1,2-c;4,5-c']bis[1,2,5]thiadiazole heterocycles, in which macromolecular structure and topology coalesce to promote the spin center generation and intermolecular exchange coupling. Electron paramagnetic resonance (EPR) spectroscopy is consistent with spatially localized spins, while magnetic susceptibility measurements show clear anisotropic spin ordering and exchange interactions that persist at room temperature. The application of long-range π-correlations for spin center generation promotes remarkable stability. This work offers a fundamentally new approach to the implementation of this long-sought-after physical phenomenon within organic materials and the integration of manifold properties within emerging technologies.

Sequential Selective Solvent On-Film Annealing: Fabrication of Monolayers of Ordered Anisotropic Polymer Particles.

Although various strategies have been developed to prepare anisotropic polymeric particles, it remains challenging to fabricate monolayers of anisotropic polymeric particles, which can extend the applications of anisotropic particles. Here, we develop a novel and facile approach to fabricate monolayers of anisotropic polymeric particles. Monolayers of polystyrene (PS) microspheres with a mean diameter of 10 µm are deposited on glass substrates coated with poly(methyl methacrylate) films, followed by sequential selective solvent on-film annealing processes. Monolayers of anisotropic polymeric particles, such as the snowman-like PS particles, are successfully fabricated. Such unique structures possess the long-range ordering of monolayers (the structure factor) and the anisotropic geometry of individual particles (the form factor). The nanomechanical properties of the PS particles are also characterized using atomic force microscopy force volume measurements, showing a decrease in the Young's moduli of the PS particles owing to the looser packing of the polymer chains. This work provides the most facile and versatile strategy by far to fabricate monolayers of ordered anisotropic polymeric particles, which are inaccessible by other traditional means.

Relationship between Semi-Quantitative Parameters of Thallium-201 Myocardial Perfusion Imaging and Coronary Artery Disease.

This study aimed to investigate the diagnostic performance of semi-quantitative parameters of thallium-201 myocardial perfusion imaging (MPI) for coronary artery disease (CAD). From January to December 2017, patients were enrolled who had undergone Tl-201 MPI and received cardiac catheterization for coronary artery disease within three months of MPI. Receiver operating characteristics (ROC) analysis was used to determine the optimal cutoff values of semi-quantitative parameters. A comparison of the sensitivity and specificity of these parameters based on different subgroupings was further performed. A total of 130 patients were enrolled for further analysis. Among the collected parameters, the stress total perfusion deficit (sTPD) had the highest value of the area under curve (0.813) under the optimal cutoff value of 3.5%, with a sensitivity and specificity of 73.5% and 74.5%, respectively (p = 0.0000), for the diagnosis of CAD. With further subgrouping analysis based on history of diabetes or dyslipidemia, the sensitivity and specificity showed similar results. Based on the currently collected data and image acquisition conditions, the sTPD parameter has a clinical role for the diagnosis of CAD with a cutoff value of 3.5%.

Incidental Finding of Urinary Bladder Retention on the 99mTc-Labeled Red Blood Cells Subcutaneous Radionuclide Venography.

We present a case with swelling of the lower extremities, shortness of breath, and hyponatremia. (99m)Tc-labeled red blood cells subcutaneous radionuclide venography was performed to rule out deep vein thrombosis. Disturbed iliac venous flow and a photopenic lesion were noted in the lower abdomen on the planar imaging. SPECT/CT imaging revealed a hypodense lesion in the lower abdomen. Distended urinary bladder and retention were impressed. After approximately 4000 mL of urine was drained, symptoms were dramatically relieved, and improvement of hyponatremia was also observed.

On-Film Annealing: A Simple Method to Fabricate Heterogeneous Polymer Surfaces, Porous Films, and Hemispheres.

Polymer microspheres have been widely investigated because of their applications in areas such as drug delivery, latex diagnostics, and affinity bioseparators. The effect of annealing on polymer microspheres, however, has been rarely studied. In this work, we demonstrate the morphology transformation of polystyrene (PS) microspheres annealed thermally on poly(methyl methacrylate) (PMMA) films. During the annealing process, the PS microspheres gradually sink into the PMMA films and transform into PS hemispheres, driven by the reduction of the surface and interfacial energies. The effect of the film thicknesses on the morphology transformation is also studied. In addition, porous PMMA films or PS hemispheres can be obtained by removing the PS or the PMMA domains of the polymer composites using cyclohexane or acetic acid, respectively.